The current design of hydro-viscous clutch（HVC） in tracked vehicle fan transmission mainly focuses on high-speed and high power. However, the fluid torque under the influence of fluid temperature can not be predicte...The current design of hydro-viscous clutch（HVC） in tracked vehicle fan transmission mainly focuses on high-speed and high power. However, the fluid torque under the influence of fluid temperature can not be predicted accurately by conventional mathematical model or experimental research. In order to validate the fluid torque of HVC by taking the viscosity-temperature characteristic of fluid into account, the test rig is designed. The outlet oil temperature is measured and fitted with different rotation speed, oil film thickness, oil flow rate, and inlet oil temperature. Meanwhile, the film torque can be obtained. Based on Navier-Stokes equations and the continuity equation, the mathematical model of fluid torque is proposed in cylindrical coordinate. Iterative method is employed to solve the equations. The radial and tangential speed distribution, radial pressure distribution and theoretical flow rate are determined and analyzed. The models of equivalent radius and fluid torque of friction pairs are introduced. The experimental and theoretical results indicate that tangential speed distribution is mainly determined by the relative rotating speed between the friction plate and the separator disc. However, the radial speed distribution and pressure distribution are dominated by pressure difference at the lower rotating speed. The oil film fills the clearance and the film torque increases with increasing rotating speed. However, when the speed reaches a certain value, the centrifugal force will play an important role on the fluid distribution. The pressure is negative at the outer radius when inlet flow rate is less than theoretical flow, so the film starts to shrink which decreases the film torque sharply. The theoretical fluid torque has good agreement with the experimental data. This research proposes a new fluid torque mathematical model which may predict the film torque under the influence of temperature more accurately.展开更多
The velocity, pressure and temperature distributions of the flow in the gap between hydro-viscous drive friction disks are the key parameters in the design of hydro-viscous drive and angular velocity controller. In th...The velocity, pressure and temperature distributions of the flow in the gap between hydro-viscous drive friction disks are the key parameters in the design of hydro-viscous drive and angular velocity controller. In the previous works dealing with the flow in the gap between disks in hydro-viscous drive, few authors considered the effect of Coriolis force on the flow. The object of this work is to investigate the flow with consideration of the effects of centrifugal force, Coriolis force and variable viscosity. A simplified mathematical model based on steady and laminar flow is presented. An approximate solution to the simplified mathematical model is obtained by using the iteration method assuming that the fluid viscosity remains constant. Then the model considering the effect of variable viscosity is solved by means of computational fluid dynamics code FLUENT. Numerical results of the flow are obtained. It is found that radial velocity profile diverges from the ideal parabolic curve due to inertial forces and tangential velocity profile is nonlinear due to Coriolis force, and pressure has two possible solution branches. In addition, it is found that variable viscosity plays an important role on pressure profiles which are significantly different from those of fluid with constant viscosity. The experimental device designed for this work consists of two disks, and one of them is fixed. Experimental pressure and temperature of the flow within test rig are obtained. It is shown that the trend of numerical results is in agreement with that of experimental ones. The research provides a theoretical foundation for hydro-viscous drive design.展开更多
The hydro-viscous drive(HVD)has been widely used in fan transmission in vehicles,fans,and scraper conveyors for step-less speed regulation or soft starting.In the mixed friction stage,the contact,friction,and torque c...The hydro-viscous drive(HVD)has been widely used in fan transmission in vehicles,fans,and scraper conveyors for step-less speed regulation or soft starting.In the mixed friction stage,the contact,friction,and torque characteristics of friction pairs are very complex and change at any time.The characteristics of the frictional and hydrodynamic lubrication states were studied in order to calculate and predict the friction and torque characteristics of the friction pairs in the mixed friction stage.The fluid torque was calculated by applying the average shear stress model and the load-carrying capacity of asperity was determined on the basis of the fractal contact theory.In addition,the contact friction coefficient of the friction pairs was taken into consideration and measured by using the MM1000-Ⅲfriction and wear testing machine.The asperity friction torque and total torque in the mixed friction stage were obtained and finally,the test rig for the torque characteristics was set up.The results show that the contribution to the total torque is shared by the oil film and the asperity friction.The friction coefficient decreases sharply at first and then increases with a change in the relative rotational speed,following the Stribeck curve closely,and the contact frictional coefficient slowly decreases with increase in the pressure between the friction pairs.The torque between the friction pairs is provided by the asperity friction,and the torque due to the oil film reduces to zero.When the thickness of the oil film is small,a major contribution to the total torque is due to the asperity friction.The total torque also increases with the decrease in the film thickness ratio.Therefore,by theoretical analysis and experimental verification,the torque of the friction pairs in the mixed friction stage can be accurately calculated using the average shear stress model and asperity friction torque model.展开更多
The flow between a grooved and a flat plate was presented to investigate the effects of groove on the behavior of hydro-viscous drive. The flow was solved by using computational fluid dynamics (CFD) code, Fluent. Para...The flow between a grooved and a flat plate was presented to investigate the effects of groove on the behavior of hydro-viscous drive. The flow was solved by using computational fluid dynamics (CFD) code, Fluent. Parameters related to the flow, such as velocity, pressure, temperature, axial force and viscous torque, are obtained. The results show that pressure at the upstream notch is negative, pressure at the downstream notch is positive and pressure along the film thickness is almost the same. Dynamic pressure peak decreases as groove depth or groove number increases, but increases as output rotary speed increases. Consequently, the groove depth is suggested to be around 0.4 mm. Both the groove itself and groove parameters (i.e. groove depth, groove number) have little effect on the flow temperature. Circumferential pressure gradient induced by the groove weakens the viscous torque on the grooved plate (driven plate) greatly. It has little change as the groove depth increases. However, it decreases dramatically as the groove number increases. The experiment results show that the trend of experimental temperature and pressure are the same with numerical results. And the output rotary speed also has relationship with input flow rate and flow temperature.展开更多
A numerical model to predict film torque of hydro-viscous clutch was developed.The model was established with computational fluid dynamics（CFD）.The pressure distribution,velocity of flow and film torque were obtaine...A numerical model to predict film torque of hydro-viscous clutch was developed.The model was established with computational fluid dynamics（CFD）.The pressure distribution,velocity of flow and film torque were obtained based on vertical-horizontal grooved plate and radial grooved plate separately.The boundary conditions,such as the relative rotation,the fluid temperature and the oil feeding pressure,were also discussed.The results showed that the film torque of two kinds of grooved plate increased with increasing relative rotation.However,the film torque decreased with increasing fluid temperature and feeding pressure.Meanwhile,the film torque of radial grooved plate was less than vertical-horizontal grooved plate at the same condition.Our study showed that the model can efficiently calculate the film torque with complex geometry parameters and boundary conditions.展开更多
The mechanism of a hydro-viscous soft start is of great importance in the design of a hydro-viscous clutch and its control system. To explain the mechanism of a hydro-viscous soft start, the startup process of a belt ...The mechanism of a hydro-viscous soft start is of great importance in the design of a hydro-viscous clutch and its control system. To explain the mechanism of a hydro-viscous soft start, the startup process of a belt conveyor was numerically analyzed with the modified Reynolds equation, an energy equation and a temperature-viscosity equation. The effect of temperature and grooves of the friction disk surface on torque transfer and load capacity of the oil film have also been analyzed. The results show that 1) the grooves are the basis of forming dynamic pressure but they may reduce the capacity of torque transfer to a certain extent, 2) during the startup process, temperature has little effect on torque transfer and load capacity and the variation in load capacity of the oil film is very small, indicating that it is preferable to use the flow rate as a control object than the pressure of the feed cylinder. The results have been verified by an experiment.展开更多
Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was ...Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was changed, the output rotating speeds were recorded and analyzed. Results By comparing the results got under different experimental procedures with those measured with an electro-rheometer, it can be seen that the shearing rate has tremendous influence on the speed modulating of a fan clutch. This is because the disperse phase can't form chains (clusters)easily at high shear rate.Conclusion The result tested on the present ER fluid demonstrates that this fluid will show the properties of Newton one,i.e. its apparent viscosity is constant. as the shear rate increases.展开更多
The flow field of the oil film between frictional pairs in the hydroviscous drive test rig is investigated. A three-dimensional Navier-Stokes（N-S） equation considering viscous force and inertial force rather than Re...The flow field of the oil film between frictional pairs in the hydroviscous drive test rig is investigated. A three-dimensional Navier-Stokes（N-S） equation considering viscous force and inertial force rather than Reynolds equation or modified Reynolds equation is presented to model the flow field. Pressure and temperature distribution in radial and circumferential direction under three different conditions, i.e., isothermal, that considering viscosity-temperature characteristic as well as shear thinning non-Newtonian fluid are simulated, respectively, by utilizing the commercial computational fluid dynamics（CFD） software FLUENT. The results reveal that the grooves on the driven plate make the pressure, temperature distribution present periodic variation. The oil temperature and shear rate have important effects on the flow field between frictional pairs, and the oil temperature is more important parameter. The simulation results lay a theoretical foundation for the reasonable designs ofhydroviscous drive.展开更多
Rotational speed stability is an important evaluation indicator of the performance of a hydro-viscous clutch(HVC).To improve the rotational speed stability of HVCs in mixed lubrication and the running condition of the...Rotational speed stability is an important evaluation indicator of the performance of a hydro-viscous clutch(HVC).To improve the rotational speed stability of HVCs in mixed lubrication and the running condition of the friction pairs,the speed stability of an HVC in mixed lubrication was studied.To this end,the friction coefficients of both copper-based and paper-based friction pairs were experimentally tested using an MM1000-III wet friction machine.Theoretically,a torsional vibration model of the system is presented.The phase plane analysis method is applied to evaluate the stability of the torsional vibration model,where a critical negative gradient(CNG)is defined.The results show that the friction coefficient in mixed lubrication is an important parameter for the stability of the rotational speed.The system will be unstable when the negative gradient of the friction coefficient-slip speed is larger than the CNG.According to the definition of the CNG,suggestions regarding choice of friction pairs are made to improve the rotational speed stability of an HVC in mixed lubrication.展开更多
基金supported by National Natural Science Foundation of China(Grant No.51275039)
文摘The current design of hydro-viscous clutch（HVC） in tracked vehicle fan transmission mainly focuses on high-speed and high power. However, the fluid torque under the influence of fluid temperature can not be predicted accurately by conventional mathematical model or experimental research. In order to validate the fluid torque of HVC by taking the viscosity-temperature characteristic of fluid into account, the test rig is designed. The outlet oil temperature is measured and fitted with different rotation speed, oil film thickness, oil flow rate, and inlet oil temperature. Meanwhile, the film torque can be obtained. Based on Navier-Stokes equations and the continuity equation, the mathematical model of fluid torque is proposed in cylindrical coordinate. Iterative method is employed to solve the equations. The radial and tangential speed distribution, radial pressure distribution and theoretical flow rate are determined and analyzed. The models of equivalent radius and fluid torque of friction pairs are introduced. The experimental and theoretical results indicate that tangential speed distribution is mainly determined by the relative rotating speed between the friction plate and the separator disc. However, the radial speed distribution and pressure distribution are dominated by pressure difference at the lower rotating speed. The oil film fills the clearance and the film torque increases with increasing rotating speed. However, when the speed reaches a certain value, the centrifugal force will play an important role on the fluid distribution. The pressure is negative at the outer radius when inlet flow rate is less than theoretical flow, so the film starts to shrink which decreases the film torque sharply. The theoretical fluid torque has good agreement with the experimental data. This research proposes a new fluid torque mathematical model which may predict the film torque under the influence of temperature more accurately.
基金supported by National Natural Science Foundation of China (Grant No. 50475106)
文摘The velocity, pressure and temperature distributions of the flow in the gap between hydro-viscous drive friction disks are the key parameters in the design of hydro-viscous drive and angular velocity controller. In the previous works dealing with the flow in the gap between disks in hydro-viscous drive, few authors considered the effect of Coriolis force on the flow. The object of this work is to investigate the flow with consideration of the effects of centrifugal force, Coriolis force and variable viscosity. A simplified mathematical model based on steady and laminar flow is presented. An approximate solution to the simplified mathematical model is obtained by using the iteration method assuming that the fluid viscosity remains constant. Then the model considering the effect of variable viscosity is solved by means of computational fluid dynamics code FLUENT. Numerical results of the flow are obtained. It is found that radial velocity profile diverges from the ideal parabolic curve due to inertial forces and tangential velocity profile is nonlinear due to Coriolis force, and pressure has two possible solution branches. In addition, it is found that variable viscosity plays an important role on pressure profiles which are significantly different from those of fluid with constant viscosity. The experimental device designed for this work consists of two disks, and one of them is fixed. Experimental pressure and temperature of the flow within test rig are obtained. It is shown that the trend of numerical results is in agreement with that of experimental ones. The research provides a theoretical foundation for hydro-viscous drive design.
基金Supported by National Natural Science Foundation of China(Grant Nos.51805351,U1810123)
文摘The hydro-viscous drive(HVD)has been widely used in fan transmission in vehicles,fans,and scraper conveyors for step-less speed regulation or soft starting.In the mixed friction stage,the contact,friction,and torque characteristics of friction pairs are very complex and change at any time.The characteristics of the frictional and hydrodynamic lubrication states were studied in order to calculate and predict the friction and torque characteristics of the friction pairs in the mixed friction stage.The fluid torque was calculated by applying the average shear stress model and the load-carrying capacity of asperity was determined on the basis of the fractal contact theory.In addition,the contact friction coefficient of the friction pairs was taken into consideration and measured by using the MM1000-Ⅲfriction and wear testing machine.The asperity friction torque and total torque in the mixed friction stage were obtained and finally,the test rig for the torque characteristics was set up.The results show that the contribution to the total torque is shared by the oil film and the asperity friction.The friction coefficient decreases sharply at first and then increases with a change in the relative rotational speed,following the Stribeck curve closely,and the contact frictional coefficient slowly decreases with increase in the pressure between the friction pairs.The torque between the friction pairs is provided by the asperity friction,and the torque due to the oil film reduces to zero.When the thickness of the oil film is small,a major contribution to the total torque is due to the asperity friction.The total torque also increases with the decrease in the film thickness ratio.Therefore,by theoretical analysis and experimental verification,the torque of the friction pairs in the mixed friction stage can be accurately calculated using the average shear stress model and asperity friction torque model.
基金Project(50475106)supported by the National Natural Science Foundation of China
文摘The flow between a grooved and a flat plate was presented to investigate the effects of groove on the behavior of hydro-viscous drive. The flow was solved by using computational fluid dynamics (CFD) code, Fluent. Parameters related to the flow, such as velocity, pressure, temperature, axial force and viscous torque, are obtained. The results show that pressure at the upstream notch is negative, pressure at the downstream notch is positive and pressure along the film thickness is almost the same. Dynamic pressure peak decreases as groove depth or groove number increases, but increases as output rotary speed increases. Consequently, the groove depth is suggested to be around 0.4 mm. Both the groove itself and groove parameters (i.e. groove depth, groove number) have little effect on the flow temperature. Circumferential pressure gradient induced by the groove weakens the viscous torque on the grooved plate (driven plate) greatly. It has little change as the groove depth increases. However, it decreases dramatically as the groove number increases. The experiment results show that the trend of experimental temperature and pressure are the same with numerical results. And the output rotary speed also has relationship with input flow rate and flow temperature.
基金Supported by the National Natural Science Foundation of China(51275039)
文摘A numerical model to predict film torque of hydro-viscous clutch was developed.The model was established with computational fluid dynamics（CFD）.The pressure distribution,velocity of flow and film torque were obtained based on vertical-horizontal grooved plate and radial grooved plate separately.The boundary conditions,such as the relative rotation,the fluid temperature and the oil feeding pressure,were also discussed.The results showed that the film torque of two kinds of grooved plate increased with increasing relative rotation.However,the film torque decreased with increasing fluid temperature and feeding pressure.Meanwhile,the film torque of radial grooved plate was less than vertical-horizontal grooved plate at the same condition.Our study showed that the model can efficiently calculate the film torque with complex geometry parameters and boundary conditions.
文摘The mechanism of a hydro-viscous soft start is of great importance in the design of a hydro-viscous clutch and its control system. To explain the mechanism of a hydro-viscous soft start, the startup process of a belt conveyor was numerically analyzed with the modified Reynolds equation, an energy equation and a temperature-viscosity equation. The effect of temperature and grooves of the friction disk surface on torque transfer and load capacity of the oil film have also been analyzed. The results show that 1) the grooves are the basis of forming dynamic pressure but they may reduce the capacity of torque transfer to a certain extent, 2) during the startup process, temperature has little effect on torque transfer and load capacity and the variation in load capacity of the oil film is very small, indicating that it is preferable to use the flow rate as a control object than the pressure of the feed cylinder. The results have been verified by an experiment.
文摘Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was changed, the output rotating speeds were recorded and analyzed. Results By comparing the results got under different experimental procedures with those measured with an electro-rheometer, it can be seen that the shearing rate has tremendous influence on the speed modulating of a fan clutch. This is because the disperse phase can't form chains (clusters)easily at high shear rate.Conclusion The result tested on the present ER fluid demonstrates that this fluid will show the properties of Newton one,i.e. its apparent viscosity is constant. as the shear rate increases.
基金National Natural Science Foundation of China(No.50475106)
文摘The flow field of the oil film between frictional pairs in the hydroviscous drive test rig is investigated. A three-dimensional Navier-Stokes（N-S） equation considering viscous force and inertial force rather than Reynolds equation or modified Reynolds equation is presented to model the flow field. Pressure and temperature distribution in radial and circumferential direction under three different conditions, i.e., isothermal, that considering viscosity-temperature characteristic as well as shear thinning non-Newtonian fluid are simulated, respectively, by utilizing the commercial computational fluid dynamics（CFD） software FLUENT. The results reveal that the grooves on the driven plate make the pressure, temperature distribution present periodic variation. The oil temperature and shear rate have important effects on the flow field between frictional pairs, and the oil temperature is more important parameter. The simulation results lay a theoretical foundation for the reasonable designs ofhydroviscous drive.
基金supported by National Natural Science Foundation of China(Grant No.51275039)Tribology Science Fund of the State Key Laboratory of Tribology(Grant No.SKLTKF13B01).
文摘Rotational speed stability is an important evaluation indicator of the performance of a hydro-viscous clutch(HVC).To improve the rotational speed stability of HVCs in mixed lubrication and the running condition of the friction pairs,the speed stability of an HVC in mixed lubrication was studied.To this end,the friction coefficients of both copper-based and paper-based friction pairs were experimentally tested using an MM1000-III wet friction machine.Theoretically,a torsional vibration model of the system is presented.The phase plane analysis method is applied to evaluate the stability of the torsional vibration model,where a critical negative gradient(CNG)is defined.The results show that the friction coefficient in mixed lubrication is an important parameter for the stability of the rotational speed.The system will be unstable when the negative gradient of the friction coefficient-slip speed is larger than the CNG.According to the definition of the CNG,suggestions regarding choice of friction pairs are made to improve the rotational speed stability of an HVC in mixed lubrication.
