Seismic interpretation and hydrocarbon accumulations implication of the Miocene Meishan Formation reefs in southern Qiongdongnan Basin, northern South China Sea

Numerous moundy reflections were found at the Upper Meishan Formation in southern Qiongdongnan Basin, South China Sea which are suspected reefs. However, no common understanding on the seismic and geologic interpretation was acquired. Based on seismic reflection identification, geometrical configuration description, wave impedance inversion, forward simulation, analysis of reef-building sedimentary environments and pseudomorph identification, these suspected-reef moundy reflections were studied in details.Three types of reefs were recognized, i.e., patch reef, platform-edge reef, and pinnacle reef. They have some typical characteristics of reefs, including moundy or lenticular shape, clear outline with crest and canal, internal foreset bedding, bidirectional uplap between limbs, and strong reflection at top and bottom. The patch reefs are of moundy seismic facies, with moderateestrong amplitude and moderate frequency, and distribute at the higher part of southern slope belt. Fore-reef and back-reef of patch reefs are slightly asymmetrical being perpendicular to palaeo-bathymetric orientation; while symmetrical to slightly asymmetrical being parallel to the palaeo-bathymetric orientation, and the wave impedance value is about 7 kg/m^3×m/s.Platform-edge reefs are of flat-moundy seismic facies with strong amplitude and moderate frequency, which develop at the carbonate platform edge of higher part of southern slope belt, and the wave impedance value is about 7.5 kg/m^3×m/s. Pinnacle reefs grow up on volcanic cones, forming the complex of pinnacle reef and volcanic cone. The Miocene Meishan Formation reefs in southern Qiongdongnan Basin, northern South China Sea, with high quality sourceereservoireseal assemblages, have good petroleum exploration prospects.

Multi-Stage Basin Development and Hydrocarbon Accumulations： A Review of the Sichuan Basin at Eastern Margin of the Tibetan Plateau

Sichuan Basin is one of the uppermost petroliferous basins in China. It experienced three evolutionary phases which were marine carbonate platform （Ediacaran to Late Triassic）, Indosinian-Yanshanian orogeny foreland basin （Late Triassic to Late Cretaceous） and uplift and tectonic modification （Late Cretaceous to Quaternary）. The present-day tectonics of the Sichuan Ba- sin and its periphery are characterized by three basic elements which are topography, basement type and surface structure, and two settings （plate margin and interior）. Therefore, be subdivided into five units which have different structure and tectonic history. The basin contains five different sets of source rocks with thickness up to 2 500 m. These source rocks were well preserved due to the presence of Middel-Lower Triassic evaporites （〉-200 m） and thick terrestrial sediments filling in the Indosinian-Yanshanian foreland basin （〉3 000 m）. The uplift and erosion since Late Cretaceous has significant influence on cross-strata migration and accumulation of oil and gas. The multi-phase evolution of the basin and its superimposed tectonic elements, good petroleum geologic conditions and diverse petroleum systems reveal its bright exploration prospects.

Hydrocarbon accumulation in deep ancient carbonate-evaporite assemblages

The Ediacaran–Ordovician strata within three major marine basins(Tarim,Sichuan,and Ordos)in China are analyzed.Based on previous studies focusing on the characteristics of the Neoproterozoic–Cambrian strata within the three major basins(East Siberian,Oman,and Officer in Australia)overseas,the carbonate–evaporite assemblages in the target interval are divided into three types:intercalated carbonate and gypsum salt,interbedded carbonate and gypsum salt,and coexisted carbonate,gypsum salt and clastic rock.Moreover,the concept and definition of the carbonate-evaporite assemblage are clarified.The results indicate that the oil and gas in the carbonate-evaporite assemblage are originated from two types of source rocks:shale and argillaceous carbonate,and confirmed the capability of gypsum salt in the saline environment to drive the source rock hydrocarbon generation.The dolomite reservoirs are classified in two types:gypseous dolomite flat,and grain shoal&microbial mound.This study clarifies that the penecontemporaneous or epigenic leaching of atmospheric fresh water mainly controlled the large-scale development of reservoirs.Afterwards,burial dissolution transformed and reworked the reservoirs.The hydrocarbon accumulation in carbonate-evaporite assemblage can be categorized into eight sub-models under three models(sub-evaporite hydrocarbon accumulation,supra-evaporite hydrocarbon accumulation,and inter-evaporite hydrocarbon accumulation).As a result,the Cambrian strata in the Tazhong Uplift North Slope,Maigaiti Slope and Mazatag Front Uplift Zone of the Tarim Basin,the Cambrian strata in the eastern-southern area of the Sichuan Basin,and the inter-evaporite Ma-4 Member of Ordovician in the Ordos Basin,China,are defined as favorable targets for future exploration.

Hydrocarbon accumulation and orderly distribution of whole petroleum system in marine carbonate rocks of Sichuan Basin,SW China

Based on the situation and progress of marine oil/gas exploration in the Sichuan Basin,SW China,the whole petroleum system is divided for marine carbonate rocks of the basin according to the combinations of hydrocarbon accumulation elements,especially the source rock.The hydrocarbon accumulation characteristics of each whole petroleum system are analyzed,the patterns of integrated conventional and unconventional hydrocarbon accumulation are summarized,and the favorable exploration targets are proposed.Under the control of multiple extensional-convergent tectonic cycles,the marine carbonate rocks of the Sichuan Basin contain three sets of regional source rocks and three sets of regional cap rocks,and can be divided into the Cambrian,Silurian and Permian whole petroleum systems.These whole petroleum systems present mainly independent hydrocarbon accumulation,containing natural gas of affinity individually.Locally,large fault zones run through multiple whole petroleum systems,forming a fault-controlled complex whole petroleum system.The hydrocarbon accumulation sequence of continental shelf facies shale gas accumulation,marginal platform facies-controlled gas reservoirs,and intra-platform fault-and facies-controlled gas reservoirs is common in the whole petroleum system,with a stereoscopic accumulation and orderly distribution pattern.High-quality source rock is fundamental to the formation of large gas fields,and natural gas in a whole petroleum system is generally enriched near and within the source rocks.The development and maintenance of large-scale reservoirs are essential for natural gas enrichment,multiple sources,oil and gas transformation,and dynamic adjustment are the characteristics of marine petroleum accumulation,and good preservation conditions are critical to natural gas accumulation.Large-scale marginal-platform reef-bank facies zones,deep shale gas,and large-scale lithological complexes related to source-connected faults are future marine hydrocarbon exploration targets in the Sichuan Basin.

Hydrocarbon accumulation history in Lower Cretaceous in northern slope of Bongor Basin in Chad,Central Africa

Based on the analysis of the fluid inclusion homogenization temperature and apatite fission track on the northern slope zone of the Bongor Basin in Chad,this paper studied the time and stages of hydrocarbon accumulation in the study area.The results show that:(1)The brine inclusions of the samples from the Kubla and Prosopis formations in the Lower Cretaceous coexisting with the hydrocarbon generally present two sets of peak ranges of homogenization temperature,with the peak ranges of low temperature and high temperature being 75–105℃ and 115–135℃,respectively;(2)The samples from the Kubla and Prosopis formations have experienced five tectonic evolution stages,i.e.,rapid subsidence in the Early Cretaceous,tectonic inversion in the Late Cretaceous,small subsidence in the Paleogene,uplift at the turn of the Paleogene and Neogene,and subsidence since the Miocene,in which the denudation thickness of the Late Cretaceous and after the turn of the Paleogene and Neogene are~1.8 km and~0.5 km,respectively.The cumulative denudation thickness of the two periods is about 2.3 km;(3)Using the brine inclusion homogenization temperature coexisting with the hydrocarbon as the capture temperature of the hydrocarbon,and combining with the apatite fission track thermal history modeling,the result shows that the Kubla and Prosopis formations in the Lower Cretaceous on the northern slope of the Bongor Basin have the same hydrocarbon accumulation time and stages,both of which have undergone two stages of hydrocarbon charging at 80–95 Ma and 65–80 Ma.The first stage of charging corresponds to the initial migration of hydrocarbon at the end of the Early Cretaceous rapid sedimentation,while the second stage of charging is in the stage of intense tectonic inversion in the Late Cretaceous.

Research advances on the mechanisms of reservoir formation and hydrocarbon accumulation and the oil and gas development methods of deep and ultra-deep marine carbonates

Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-deep marine carbonate strata in the central and western superimposed basin in China have been continuously studied.(1) The fault-controlled carbonate reservoir and the ancient dolomite reservoir are two important types of reservoirs in the deep and ultra-deep marine carbonates. According to the formation origin, the large-scale fault-controlled reservoir can be further divided into three types:fracture-cavity reservoir formed by tectonic rupture, fault and fluid-controlled reservoir, and shoal and mound reservoir modified by fault and fluid. The Sinian microbial dolomites are developed in the aragonite-dolomite sea. The predominant mound-shoal facies, early dolomitization and dissolution, acidic fluid environment, anhydrite capping and overpressure are the key factors for the formation and preservation of high-quality dolomite reservoirs.(2) The organic-rich shale of the marine carbonate strata in the superimposed basins of central and western China are mainly developed in the sedimentary environments of deep-water shelf of passive continental margin and carbonate ramp. The tectonic-thermal system is the important factor controlling the hydrocarbon phase in deep and ultra-deep reservoirs, and the reformed dynamic field controls oil and gas accumulation and distribution in deep and ultra-deep marine carbonates.(3) During the development of high-sulfur gas fields such as Puguang, sulfur precipitation blocks the wellbore. The application of sulfur solvent combined with coiled tubing has a significant effect on removing sulfur blockage. The integrated technology of dual-medium modeling and numerical simulation based on sedimentary simulation can accurately characterize the spatial distribution and changes of the water invasion front.Afterward, water control strategies for the entire life cycle of gas wells are proposed, including flow rate management, water drainage and plugging.(4) In the development of ultra-deep fault-controlled fractured-cavity reservoirs, well production declines rapidly due to the permeability reduction, which is a consequence of reservoir stress-sensitivity. The rapid phase change in condensate gas reservoir and pressure decline significantly affect the recovery of condensate oil. Innovative development methods such as gravity drive through water and natural gas injection, and natural gas drive through top injection and bottom production for ultra-deep fault-controlled condensate gas reservoirs are proposed. By adopting the hierarchical geological modeling and the fluid-solid-thermal coupled numerical simulation, the accuracy of producing performance prediction in oil and gas reservoirs has been effectively improved.

Geological Conditions and Hydrocarbon Accumulation Processes in the Sahul Platform, Northern Bonaparte Basin, Australia

The Sahul Platform where the Sunset-Loxton Shoals and Chuditch gas fields were discovered is located between the Timor Trough to the north and the Malita Graben to the south. These areas are located respectively 440 km and 380 km northwest of Darwin in the northern Bonaparte Basin, Australia. Based on the structural evolution of the northern Bonaparte Basin, data from the wells Loxton Shoals 1, Sunset 1 and Chuditch 1 in the Sahul Platform and Heron 1 in the Malita Graben depocentre, and the Seismic Line N11606 were used to clarify the geological conditions and reconstruct the hydrocarbon accumulation processes in the study area. BasinMod 1-D, 2-D, and 3-D software was used for modeling. The Plover Formation source rock was a poor-to-good hydrocarbon generative potential and reached the middle to late mature oil window in the Sunset-Loxton Shoals field whereas in the Chuditch field, it was an overall fair-to-good hydrocarbon generative potential, and attained the Late mature oil window. The Flamingo, and the Echuca Shoals formations source rocks in the same field were a fair and good hydrocarbon generation potential respectively, and both reached mid-mature oil window. In the Malita Graben depocentre, the Petrel (Frigate) and the Echuca Shoals formations source rocks were a poor-to-very good hydrocarbon generating potential, and had attained wet gas window at the present day. The analyses of organic matter showed that the source rocks in the study area and Malita Graben were gas prone with kerogen types II2 & III and III predominantly. The Middle Jurassic Plover Formation sandstone reservoir in the Sunset-Loxton field was a poor-to-very good quality and potential for gas beds, and it was a very poor-to-very good quality and potential for gas beds in the Chuditch field. The intensities of gas generation and expulsion were more than of oil ones either in the Sahul Platform or in the Malita Graben. The Plover, Petrel (Frigate) and Echuca Shoals formations source rocks in the wells Chuditch 1 and Heron 1, except for the Flamingo Formation in the well Chuditch 1, had higher gas and oil expelling efficiencies than the Plover Formation source rock of the wells in the Sunset-Loxton Shoals field. The hydrocarbon migrated mainly from the Upper Jurassic Frigate Shale source rock in the Malita Graben depocentre (structurally lower) to the Plover Formation sandstone reservoir in the Sunset-Loxton Shoals field during the Late Cretaceous at 66 Ma. In the Chuditch field, the hydrocarbon migration to the Plover Formation sandstone reservoir was initiated during the Late Miocene at 7.5 Ma from the Middle Jurassic Plover Formation source rock in the well Chuditch 1. Nowadays, the main migration pathways are from the southeastward and southward of the Sunset-Loxton Shoals field, and from southward and eastward of the Chuditch field, precisely from the hydrocarbon source kitchens of the Malita Graben depocentre. The traps in the Sahul Platform have been effective to receive the migrated hydrocarbon.

Buoyance-driven hydrocarbon accumulation depth and its implication for unconventional resource prediction

The discovery of unconventional hydrocarbon resources since the late 20th century changed geologists’understanding of hydrocarbon migration and accumulations and provides a solution to energy shortage.In 2016,unconventional oil production in the USA accounted for 41%of the total oil production;and unconventional natural gas production in China accounted for 35%of total gas production,showing strong growth momentum of unconventional hydrocarbons explorations.Unconventional hydrocarbons generally coexist with conventional petroleum resources;they sometimes distribute in a separate system,not coexisting with a conventional system.Identification and prediction of unconventional resources and their potentials are prominent challenges for geologists.This study analyzed the results of 12,237 drilling wells in six representative petroliferous basins in China and studied the correlations and differences between conventional and unconventional hydrocarbons by comparing their geological features.Migration and accumulation of conventional hydrocarbon are caused dominantly by buoyance.Wepropose a concept of buoyance-driven hydrocarbon accumulation depth to describe the deepest hydrocarbon accumulation depth driven dominantly by buoyance;beyond this depth the buoyance becomes unimportant for hydrocarbon accumulation.We found that the buoyance-driven hydrocarbon accumulation depth in petroliferous basins controls the different oil/gas reservoirs distribution and resource potentials.Hydrocarbon migration and accumulations above this depth is dominated by buoyancy,forming conventional reservoirs in traps with high porosity and permeability,while hydrocarbon migration and accumulation below this depth is dominated by non-buoyancy forces(mainly refers to capillary force,hydrocarbon volumeexpansion force,etc.),forming unconventional reservoirs in tight layers.The buoyance-driven hydrocarbon accumulation depths in six basins in China range from 1200mto 4200 m,which become shallowerwith increasing geothermal gradient,decreasing particle size of sandstone reservoir layers,or an uplift in the whole petroliferous basin.The predicted unconventional resource potential belowthe buoyance-driven hydrocarbon accumulation depth in six basins in China is more than 15.71×10^(9) t oil equivalent,among them 4.71×10^(9) t reserves have been proved.Worldwide,94%of 52,926 oil and gas reservoirs in 1186 basins are conventional reservoirs and only 6%of them are unconventional reservoirs.These 94%conventional reservoirs show promising exploration prospects in the deep area below buoyance-driven hydrocarbon accumulation depth.

Petroleum geology features and research developments of hydrocarbon accumulation in deep petroliferous basins

As petroleum exploration advances and as most of the oil-gas reservoirs in shallow layers have been explored, petroleum exploration starts to move toward deep basins, which has become an inevitable choice. In this paper, the petroleum geology features and research progress on oil-gas reservoirs in deep petroliferous basins across the world are characterized by using the latest results of worldwide deep petroleum exploration. Research has demonstrated that the deep petroleum shows ten major geological features. （1） While oil-gas reservoirs have been discovered in many different types of deep petroliferous basins, most have been discovered in low heat flux deep basins. （2） Many types of petroliferous traps are developed in deep basins, and tight oil-gas reservoirs in deep basin traps are arousing increasing attention. （3） Deep petroleum normally has more natural gas than liquid oil, and the natural gas ratio increases with the burial depth. （4） The residual organic matter in deep source rocks reduces but the hydrocarbon expulsion rate and efficiency increase with the burial depth. （5） There are many types of rocks in deep hydrocarbon reservoirs, and most are clastic rocks and carbonates. （6） The age of deep hydrocarbon reservoirs is widely different, but those recently discovered are pre- dominantly Paleogene and Upper Paleozoic. （7） The porosity and permeability of deep hydrocarbon reservoirs differ widely, but they vary in a regular way with lithology and burial depth. （8） The temperatures of deep oil-gas reservoirs are widely different, but they typically vary with the burial depth and basin geothermal gradient. （9） The pressures of deep oil-gas reservoirs differ significantly, but they typically vary with burial depth, genesis, and evolu- tion period. （10） Deep oil-gas reservoirs may exist with or without a cap, and those without a cap are typically of unconventional genesis. Over the past decade, six major steps have been made in the understanding of deep hydrocarbon reservoir formation. （1） Deep petroleum in petroliferous basins has multiple sources and many dif- ferent genetic mechanisms. （2） There are high-porosity, high-permeability reservoirs in deep basins, the formation of which is associated with tectonic events and subsurface fluid movement. （3） Capillary pressure differences inside and outside the target reservoir are the principal driving force of hydrocarbon enrichment in deep basins. （4） There are three dynamic boundaries for deep oil-gas reservoirs; a buoyancy-controlled threshold, hydrocarbon accumulation limits, and the upper limit of hydrocarbon generation. （5） The formation and distribution of deep hydrocarbon res- ervoirs are controlled by free, limited, and bound fluid dynamic fields. And （6） tight conventional, tight deep, tight superimposed, and related reconstructed hydrocarbon reservoirs formed in deep-limited fluid dynamic fields have great resource potential and vast scope for exploration. Compared with middle-shallow strata, the petroleum geology and accumulation in deep basins are more complex, which overlap the feature of basin evolution in different stages. We recommend that further study should pay more attention to four aspects： （1） identification of deep petroleum sources and evaluation of their relative contributions; （2） preservation conditions and genetic mechanisms of deep high-quality reservoirs with high permeability and high porosity; （3） facies feature and transformation of deep petroleum and their potential distribution; and （4） economic feasibility evaluation of deep tight petroleum exploration and development.

Dynamic Field Division of Hydrocarbon Migration,Accumulation and Hydrocarbon Enrichment Rules in Sedimentary Basins

Hydrocarbon distribution rules in the deep and shallow parts of sedimentary basins are considerably different, particularly in the following four aspects. First, the critical porosity for hydrocarbon migration is much lower in the deep parts of basins： at a depth of 7000 m, hydrocarbons can accumulate only in rocks with porosity less than 5%. However, in the shallow parts of basins （i.e., depths of around 1000 m）, hydrocarbon can accumulate in rocks only when porosity is over 20%. Second, hydrocarbon reservoirs tend to exhibit negative pressures after hydrocarbon accumulation at depth, with a pressure coefficient less than 0.7. However, hydrocarbon reservoirs at shallow depths tend to exhibit high pressure after hydrocarbon accumulation. Third, deep reservoirs tend to exhibit characteristics of oil （-gas）-water inversion, indicating that the oil （gas） accumulated under the water. However, the oil （gas） tends to accumulate over water in shallow reservoirs. Fourth, continuous unconventional tight hydrocarbon reservoirs are distributed widely in deep reservoirs, where the buoyancy force is not the primary dynamic force and the caprock is not involved during the process of hydrocarbon accumulation. Conversely, the majority of hydrocarbons in shallow regions accumulate in traps with complex structures. The results of this study indicate that two dynamic boundary conditions are primarily responsible for the above phenomena： a lower limit to the buoyancy force and the lower limit of hydrocarbon accumulation overall, corresponding to about 10%-12% porosity and irreducible water saturation of 100%, respectively. These two dynamic boundary conditions were used to divide sedimentary basins into three different dynamic fields of hydrocarbon accumulation： the free fluid dynamic field, limit fluid dynamic field, and restrain fluid dynamic field. The free fluid dynamic field is located between the surface and the lower limit of the buoyancy force, such that hydrocarbons in this field migrate and accumulate under the influence of, for example, the buoyancy force, pressure, hydrodynamic force, and capillary force. The hydrocarbon reservoirs formed are characterized as ＂four high,＂ indicating that they accumulate in high structures, are sealed in high locations, migrate into areas of high porosity, and are stored in reservoirs at high pressure. The basic features of distribution and accumulation in this case include hydrocarbon migration as a result of the buoyancy force and formation of a reservoir by a caprock. The limit fluid dynamic field is located between the lower limit of the buoyancy force and the lower limit of hydrocarbon accumulation overall; the hydrocarbon migrates and accumulates as a result of, for example, the molecular expansion force and the capillary force. The hydrocarbon reservoirs formed are characterized as ＂four low,＂ indicating that hydrocarbons accumulate in low structures, migrate into areas of low porosity, and accumulate in reservoirs with low pressure, and that oil（-gas）-water inversion occurs at low locations. Continuous hydrocarbon accumulation over a large area is a basic feature of this field. The restrain fluid dynamic field is located under the bottom of hydrocarbon accumulation, such that the entire pore space is filled with water. Hydrocarbons migrate as a result of the molecular diffusion force only. This field lacks many of the basic conditions required for formation of hydrocarbon reservoirs： there is no effective porosity, movable fluid, or hydrocarbon accumulation, and potential for hydrocarbon exploration is low. Many conventional hydrocarbon resources have been discovered and exploited in the free fluid dynamic field of shallow reservoirs, where exploration potential was previously considered to be low. Continuous unconventional tight hydrocarbon resources have been discovered in the limit fluid dynamic field of deep reservoirs; the exploration potential of this setting is thought to be tremendous, indicating that future exploration should be focused primarily in this direction.

A unified model for the formation and distribution of both conventional and unconventional hydrocarbon reservoirs

The discovery and large-scale exploration of unconventional oil/gas resources since 1980s have been considered as the most important advancement in the history of petroleum geology;that has not only changed the balance of supply and demand in the global energy market,but also improved our understanding of the formation mechanisms and distribution characteristics of oil/gas reservoirs.However,what is the difference of conventional and unconventional resources and why they always related to each other in petroliferous basins is not clear.As the differences and correlations between unconventional and conventional resources are complex challenging issues and very critical for resources assessment and hydrocarbon exploration,this paper focused on studying the relationship of formations and distributions among different oil/gas reservoirs.Drilling results of 12,237 exploratory wells in 6 representative petroliferous basins of China and distribution characteristics for 52,926 oil/gas accumulations over the world were applied to clarify the formation conditions and genetic relations of different oil/gas reservoirs in a petroliferous basin,and then to establish a unified model to address the differences and correlations of conventional and unconventional reservoirs.In this model,conventional reservoirs formed in free hydrocarbon dynamic field with high porosity and permeability located above the boundary of hydrocarbon buoyancy-driven accumulation depth limit.Unconventional tight reservoirs formed in confined hydrocarbon dynamic field with low porosity and permeability located between hydrocarbon buoyancy-driven accumulation depth limit and hydrocarbon accumulation depth limit.Shale oil/gas reservoirs formed in the bound hydrocarbon dynamic field with low porosity and ultra-low permeability within the source rock layers.More than 75%of proved reserves around the world are discovered in the free hydrocarbon dynamic field,which is estimated to contain only 10%of originally generated hydrocarbons.Most of undiscovered resources distributed in the confined hydrocarbon dynamic field and the bound hydrocarbon dynamic field,which contains 90%of original generated hydrocarbons,implying a reasonable and promising area for future hydrocarbon explorations.The buried depths of hydrocarbon dynamic fields become shallow with the increase of heat flow,and the remaining oil/gas resources mainly exist in the deep area of“cold basin”with low geothermal gradient.Lithology changing in the hydrocarbon dynamic field causes local anomalies in the oil/gas dynamic mechanism,leading to the local formation of unconventional hydrocarbon reservoirs in the free hydrocarbon dynamic field or the occurrence of oil/gas enrichment sweet points with high porosity and permeability in the confined hydrocarbon dynamic field.The tectonic movements destroy the medium conditions and oil/gas components,which leads to the transformation of conventional oil/gas reservoirs formed in free hydrocarbon dynamic field to unconventional ones or unconventional ones formed in confined and bound hydrocarbon dynamic fields to conventional ones.

Advances and problems in hydrocarbon exploration in the Tazhong area, Tarim Basin

Located in the middle of the Tarim Basin, Tazhong is a typical area of compound reservoirs rich in oil and gas found in the Carboniferous, Silurian and Ordovician strata. The proved, probable and possible reserves （3P reserves） in the area amount to 5×108 tons, so it is of great significance to study the advances and problems in hydrocarbon exploration in the Tazhong area. On the basis of exploration history and analysis of scientific problems, we outline eight achievements： distribution characteristics of reservoirs, stages of reservoir formation, different sources of oil and gas and their respective contributions, the effective regional caprock and reservoir-caprock combinations dominating the vertical distribution of hydrocarbon reservoirs, the control of the Tazhong Palaeo-uplift on reservoir formation and establishing geologic models, structure balance belts influencing the reconstruction and residual potential of reservoirs after accumulation, the rules and mechanisms of fractures controlling oil and gas, and the types of favorable reservoirs and their characteristics of controlling oil and gas distribution. We further point out the main problems about the oil and gas exploration in the Tazhong area and put forward some relevant proposals.

Paleoporosity and critical porosity in the accumulation period and their impacts on hydrocarbon accumulation—A case study of the middle Es3 member of the Paleogene formation in the Niuzhuang Sag, Dongying Depression, Southeastern Bohai Bay Basin, East Chi

Similar reservoir sandbodies and fault conduit systems in the sandstone reservoirs in the middle Es3 member of the Niuzhuang Sag have been problematic for a long time. The following problems remain unsolved： 1） The distribution of sandstone porosity is inconsistent with the hydrocarbon accumulation. The oil sandstones have low porosity instead of high porosity. 2） Sandstones, which have the same properties, have different levels of oiliness, and the sandstones with almost the same properties show different degrees of oil-bearing capacity. This study analyzes the condition of reservoirs in the research area during the accumulation period in terms of paleoporosity estimation and discusses the critical porosity of the sandstone reservoirs during the same period. The following conclusions can be drawn from the results. 1） Although reservoir properties are low at present and some reservoirs have become tight, the paleoporosity ranging from 18% to 25% is greater than the critical porosity of 13.9%. As the： loss of porosity is different in terms of burial history, the present porosity cannot reflect porosity during the accumulation period. Similar/y, high porosity during the accumulation period does not indicate that tbe present porosity is high. 2） The present reservoir location is consistent with the distribution of high paleoporosity during the accumulation period. This result indicates that high porosity belts are prone to hydrocarbon accumulation because of the dominant migration pathways generated as a result of property discrepancies under similar fault conduit conditions. Consequently, the hydrocarbon mainly accumulates in high porosity belts. Paleoporosity during the accumulation period is found to be a vital controlling factor. Therefore, high paleoporosity sandstones in the middle Es3 member of the Niuzhuang Sag have great potential for future exploration.

A hydrocarbon enrichment model and prediction of favorable accumulation areas in complicated superimposed basins in China

The geologic conditions of superimposed basins in China are very complicated. This is mainly shown by multi-phase structural evolution, multiple sets of source-reservoir-cap rock combinations, multiple stages of hydrocarbon generation and expulsion from source rocks, multi-cycle hydrocarbon enrichment and accumulation, and multi-phase reservoir adjustment and reconstruction. The enrichment, accumulation and distribution of hydrocarbon is mainly controlled by the source rock kitchen, paleo- anticline, regional cap rock and intensity of tectonic movement. In this paper, the T-BCMS model has been developed to predict favorable areas of hydrocarbon accumulation in complicated superimposed basins according to time and spatial relationships among five key factors. The five factors include unconformity surface representing tectonic balancing （B）, regional cap rock representing hydrocarbon protection （C）, paleo-anticline representing hydrocarbon migration and accumulation （M）, source rock kitchen representing hydrocarbon generation and expulsion （S） and geological time （T）. There are three necessary conditions to form favorable areas of hydrocarbon accumulation. First, four key factors BCMS should be strictly in the order of BCMS from top to bottom. Second, superimposition of four key factors BCMS in the same area is the most favorable for hydrocarbon accumulation. Third, vertically ordered combination and superimposition in the same area of BCMS should occur at the same geological time. The model has been used to predict the most favorable exploration areas in Ordovician in the Tarim Basin in the main hydrocarbon accumulation periods. The result shows that 95% of the discovered Ordovician hydrocarbon reservoirs are located in the predicted areas, which indicates the feasibility and reliability of the key factor matching T-BCMS model for hydrocarbon accumulation and enrichment.

The Cretaceous tectonic event in the Qiangtang Basin and its implications for hydrocarbon accumulation

The tectonic event during Cretaceous and its relationship with hydrocarbon accumulation in the Qiangtang Basin is discussed based on zircon U-Pb dating and the study of deformation, thermochronology and hydrocarbon formation. LA-ICPMS zircon U-Pb dating indicates that the tectonic event took place during the Early-Late Cretaceous （125-75Ma）. The event not only established the framework and the styles of structural traps in the basin, but also led to the cessation of the first hydrocarbon formation and the destruction of previous oil pools. The light crude oil in the basin was formed during the second hydrocarbon formation stage in the Cenozoic, and ancient structural traps formed during the Cretaceous event are promising targets for oil and gas exploration.

Hydrocarbon Accumulation Conditions of Ordovician Carbonate in Tarim Basin

Based on comprehensive analysis of reservoir-forming conditions, the diversity of reservoir and the difference of multistage hydrocarbon charge are the key factors for the carbonate hydrocarbon accumulation of the Ordovician in the Tarim Basin. Undergone four major deposition-tectonic cycles, the Ordovician carbonate formed a stable structural framework with huge uplifts, in which are developed reservoirs of the reef-bank type and unconformity type, and resulted in multistage hydrocarbon charge and accumulation during the Caledonian, Late Hercynian and Late Himalayan. With low matrix porosity and permeability of the Ordovician carbonate, the secondary solution pores and caverns serve as the main reservoir space. The polyphase tectonic movements formed unconformity reservoirs widely distributed around the paleo-uplifts; and the reef-bank reservoir is controlled by two kinds of sedimentary facies belts, namely the steep slope and gentle slope. The unconventional carbonate pool is characterized by extensive distribution, no obvious edge water or bottom water, complicated oil/gas/water relations and severe heterogeneity controlled by reservoirs. The low porosity and low permeability reservoir together with multi-period hydrocarbon accumulation resulted in the difference and complex of the distribution and production of oil/gas/water. The distribution of hydrocarbon is controlled by the temporal-spatial relation between revolution of source rocks and paleo-uplifts. The heterogenetic carbonate reservoir and late-stage gas charge are the main factors making the oil/ gas phase complicated. The slope areas of the paleo-uplifts formed in the Paleozoic are the main carbonate exploration directions based on comprehensive evaluation. The Ordovician of the northern slope of the Tazhong uplift, Lunnan and its periphery areas are practical exploration fields. The Yengimahalla-Hanikatam and Markit slopes are the important replacement targets for carbonate exploration. Gucheng, Tadong, the deep layers of Cambrian dolomite in the Lunnan and Tazhong-Bachu areas are favorable directions for research and risk exploration.

Origin, Flow of Formation Water and Hydrocarbon Accumulation in the Zhenwu Area of the North Jiangsu Basin, China

In order to understand the origin and flow of formation water and to evaluate the hydrocarbon accumulation and preservation conditions, the properties of formation water chemistry and dynamics of the Zhenwu area in the southern Gaoyou Sag, North Jiangsu Basin, China, have been investigated. The results show that Xuzhuang oilfield is infiltrated discontinuously by meteoric water under gravity, which consequently leads to the desalination of formation water. Formation water in the Zhenwu and Caozhuang oilfields is less influenced by meteoric water infiltration, and the origin is interpreted to be connate water. Hydrocarbon migration, accumulation and preservation are closely related to the hydrodynamic field of formation water. Formation water concentrates gradually during the process of centrifugal flow released by mudstone compaction and the centripetal flow of meteoric water infiltration, leading to the high salinity of the central part. The geological conditions of the southern fault-terrace belt are poor for hydrocarbon accumulation and preservation as meteoric water infiltration, leaching and oxidation, while the central part, i.e., northern Zhenwu and Caozhuang oilfields is beneficial for an abundance of hydrocarbon accumulation. Most of the large scale oil-~as fields locate herein.

Main progress and problems in research on Ordovician hydrocarbon accumulation in the Tarim Basin

The Tarim Basin is the largest petroliferous basin in the northwest of China, and is composed of a Paleozoic marine craton basin and a Meso-Cenozoic continental foreland basin. It is of great significance in exploration of Ordovician. In over 50 years of exploration, oil and gas totaling over 1.6 billion tonnes oil-equivalent has been discovered in the Ordovician carbonate formation. The accumulation mechanisms and distribution rules are quite complicated because of the burial depth more than 3,500 m, multi-source, and multi-stage accumulation, adjustment, reconstruction and re-enrichment in Ordovician. In this paper, we summarized four major advances in the hydrocarbon accumulation mechanisms of Ordovician carbonate reservoirs. First, oil came from Cambrian and Ordovician source rocks separately and as a mixture, while natural gas was mainly cracked gas generated from the Cambrian-Lower Ordovician crude oil. Second, most hydrocarbon migrated along unconformities and faults, with different directions in different regions. Third, hydrocarbon migration and accumulation had four periods： Caledonian, early Hercynian, late Hercynian and Himalayan, and the latter two were the most important for oil and gas exploration. Fourth, hydrocarbon accumulation and evolution can be generally divided into four stages： Caledonian （the period of hydrocarbon accumulation）, early Hercynian （the period of destruction）, late Hercynian （the period of hydrocarbon reconstruction and re-accumulation）, and Himalayan （the period of hydrocarbon adjustment and re-accumulation）. Source rocks （S）, combinations of reservoir-seal （C）, paleo-uplifts （M）, structure balance belt （B） matched in the same time （T） control the hydrocarbon accumulation and distribution in the Ordovician formations. Reservoir adjustment and reconstruction can be classified into two modes of physical adjustment and variation of chemical compositions and five mechanisms. These mechanisms are occurrence displacement, biodegradation, multi-source mixing, high-temperature cracking and late gas invasion. Late hydrocarbon accumulation effects controlled the distribution of current hydrocarbon. The T-BCMS model is a basic geological model to help understanding the control of reservoirs. At present, the main problems of hydrocarbon accumulation focus on two aspects, dynamic mechanisms of hydrocarbon accumulation and the quantitative models of oil-bearing in traps, which need further systemic research.

Application of an analytic hierarchy process to hydrocarbon accumulation coefficient estimation

The hydrocarbon accumulation coefficient is a key parameter in resources evaluation by genetic techniques. Methods of obtaining its value scientifically have always been an important factor influencing evaluation credibility. In this paper, the hydrocarbon accumulation system is evaluated quantitatively by establishing a hierarchy structure model based on an analytical hierarchy process. The hydrocarbon accumulation system of a higher exploration degree is selected as a calibration area and its hydrocarbon accumulation coefficient can be calculated using methods of hydrocarbon generation potential and reservoir-scale sequence. The hydrocarbon accumulation coefficient of a petroleum accumulation system can be gained by analogy of reservoir forming comprehensive evaluation results with the calibration area. The hydrocarbon accumulation coefficient of each petroleum accumulation system in the upper reservoir-forming combination of the Liaohe Western Sag can be obtained with this method. Practice shows that using the analytical hierarchy process to quantitatively evaluate the hydrocarbon accumulation system and then quantitatively predict the hydrocarbon accumulation coefficient decreases the influence of human factors in resources evaluation, and makes the resources assessment more objective and closer to the actual geological condition.

Structural Characteristics and their Significance for Hydrocarbon Accumulation in the Northern Slope of the Central Sichuan Paleo-uplift

Based on 2D and 3D seismic data,the latest drilling data and field outcrop data of the northern slope of the Central Sichuan paleo-uplift,the structural analysis method is used to analyze unconformity development characteristics and fault characteristics during the key structural transformation period,discussing the influence of the structural characteristics on the hydrocarbon accumulation of deep carbonate rocks.The results show that:(1)The two key unconformities of the Tongwan and Caledonian periods were primarily developed in deep carbonate rocks.Firstly,Tongwan’s unconformities are characterized by regional disconformities between the second and third members of the Dengying Formation,the top formation of the Sinian and the lower Cambrian,strips of which zigzag through the north and south sides of the study area.Secondly,the Caledonian unconformity is characterized by a regional unconformable contact between the lower Permian and the ower Paleozoic strata.From NE to SW,the age of the strata,which were subject to erosion,changes from new to old,the denudation distribution showing as a nose-shaped structure which inclines towards the ENE.(2)Boundary fault and transtensional strike-slip faults developed in the Sinian to Paleozoic strata.In profile,there are three types of structural styles:steep and erect,flower structures,’Y’and reversed’Y’type faults.In plane view,the Sinian developed extensional boundary faults extending in an almost NS direction,strike-slip faults developing and extending linearly in approximately EW,WNW and NE strikes in the Cambrian,with characteristically more in the south and less in the north.(3)The faults in the northern slope show obvious zonal deformations in transverse view as well as significant stages and stratified activity in a longitudinal direction.Among them,the activity of faults in the Sinian was the strongest,followed by the activity in the Cambrian period,the activity intensity of faults in the Permian period being the weakest.This fault activity can be divided into four periods:Sinian,Cambrian-Permian,the early Indosinian period and the late Indosinian-Himalayan period,the transtensional strikeslip faults being the products of oblique extensions of pre-existing weak zones in the Xingkai and Emei taphrogenesis,with a particular inheritance in the main faults.(4)Combined with hydrocarbon accumulation factors,it is considered that the epigenetic karstification of the Tongwan and Caledonian unconformities in the northern slope controlled the formation and distribution of carbonate karst reservoirs over a large area,also acting as a good pathway for oil and gas migration.The extensional faults developed at the margin of the NS trending rift,controlling the sag-platform sedimentary pattern in the Dengying Formation of the Sinian.Strike-slip faults in NE,WNW and ENE directions may control the microgeomorphological pattern inside the platform and intensify the differential distribution of grain beach facies.The multi-stage hereditary activity of strike-slip faults not only improved the porosity and permeability of the reservoirs,but also acted as the main channel of oil and gas migration,providing favorable conditions for the development of the current multi-layer gasbearing scenario in the northern slope of the Central Sichuan Basin.