Hydrodynamic Simulation of the Pagasitikos Gulf, Greece

Semi-enclosed sea basins have difficulty in recharging their waters due to limited communication with larger water bodies, with understandable consequences for their environmental status. This paper aims at the computational simulation of the hydrodynamic characteristics of the waters of the Pagasitikos Gulf (Greece), which has limited communication and water exchange with the Aegean Sea and is subject to intense environmental pressures The Estuary, Lake & Coastal Ocean 3d hydrodynamic Model (ELCOM 2.2) combined with its later version Aquatic Ecosystem Model-3d (AEM3D) were used for the simulation. The simulation included the topography of the area, the bay’s bottom geometry, atmospheric loadings, tides, the influence of the Coriolis force and boundary conditions. The hydrodynamic behaviour of the bay, water circulation, velocities at the surface and in depth, water recharge and residence time throughout the bay, density variation and other factors were examined to determine the impact of all these on the aquatic ecosystem.

Physical modeling based on hydrodynamic simulation for the design of InGaAs/InP double heterojunction bipolar transistors

A physical model for scaling and optimizing InGaAs/InP double heterojunction bipolar transistors（DHBTs） based on hydrodynamic simulation is developed.The model is based on the hydrodynamic equation,which can accurately describe non-equilibrium conditions such as quasi-ballistic transport in the thin base and the velocity overshoot effect in the depleted collector.In addition,the model accounts for several physical effects such as bandgap narrowing,variable effective mass,and doping-dependent mobility at high fields.Good agreement between the measured and simulated values of cutoff frequency,f t,and maximum oscillation frequency,f max,are achieved for lateral and vertical device scalings.It is shown that the model in this paper is appropriate for downscaling and designing InGaAs/InP DHBTs.

Radiation Hydrodynamic Simulations in the Planar Scheme for the Fundamental Studies of Shock Ignition

As a fundamental and crucial research topic in the direct-driven inertial confinement fusion（ICF）,especially for shock ignition（SI）,investigation on the laser coupling with planar lowZ targets is beneficial for deep physical comprehension at the primary phase of SI.The production of the intense shock and the shock coalescence in the multi-layer targets,driven by the 3ω intense laser（351 nm the wavelength）,were studied in detail with the 1D and 2D radiation hydrodynamic simulations.It was inferred that the 1D simulation would overrate the shock velocity and the ablation pressure of the spike;the coalescence time and the velocity of the coalescence shock depended evidently on the pulse shape and the start time of the spike.The present study can also provide a semi-quantitative reference for the design of the SI decomposition experiments on the Shenguang-III prototype laser facility.

Numerical simulation of the hydrodynamics within octagonal tanks in recirculating aquaculture systems

A three-dimensional numerical model was established to simulate the hydrodynamics within an octagonal tank of a recirculating aquaculture system. The realizable k-e turbulence model was applied to describe the flow, the discrete phase model （DPM） was applied to generate particle trajectories, and the governing equations are solved using the finite volume method. To validate this model, the numerical results were compared with data obtained from a full-scale physical model. The results show that： （1） the realizable k-e model applied for turbulence modeling describes well the flow pattern in octagonal tanks, giving an average relative error of velocities between simulated and measured values of 18% from contour maps of velocity magnitudes; （2） the DPM was applied to obtain particle trajectories and to simulate the rate of particle removal from the tank. The average relative error of the removal rates between simulated and measured values was 11%. The DPM can be used to assess the self-cleaning capability of an octagonal tank; （3） a comprehensive account of the hydrodynamics within an octagonal tank can be assessed from simulations. The velocity distribution was uniform with an average velocity of 15 cm/s; the velocity reached 0.8 m/s near the inlet pipe, which can result in energy losses and cause wall abrasion; the velocity in tank corners was more than 15 cm/s, which suggests good water mixing, and there was no particle sedimentation. The percentage of particle removal for octagonal tanks was 90% with the exception of a little accumulation of 〈5 mm particle in the area between the inlet pipe and the wall. This study demonstrated a consistent numerical model of the hydrodynamics within octagonal tanks that can be further used in their design and optimization as well as promote the wide use of computational fluid dynamics in aquaculture engineering.

Simulation of microswimmer hydrodynamics with multiparticle collision dynamics

In this review we discuss the recent progress in the simulation of soft active matter systems and in particular the hydrodynamics of microswimmers using the method of multiparticle collision dynamics,which solves the hydrodynamic flows around active objects on a coarse-grained level.We first present a brief overview of the basic simulation method and the coupling between microswimmers and fluid.We then review the current achievements in simulating flexible and rigid microswimmers using multiparticle collision dynamics,and briefly conclude and discuss possible future directions.

6-DOF Motion Assessment of A Hydrodynamic Numerical Simulation of A Semisubmersible Platform Using Prototype Monitoring Data

Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was established according to its design specifications.The model was assessed with two sets of field monitoring data representing harsh and conventional sea states.The motion responses of the platform according to the measured data and the hydrodynamic simulation were compared by reviewing their statistical characteristics,distributions,and spectrum characteristics.The comparison showed that the hydrodynamic model could correctly simulate the frequency domain characteristics of the motion responses of the platform.However,the simulation underestimated the reciprocating motions of the floating body and the influence of slow drift on the motion of the platform.Meanwhile,analysis of the monitoring data revealed that the translational degrees of freedom(DOF)and rotational DOF of the platform were coupled,but these coupled motion states were not apparent in the hydrodynamic simulation.

Numerical simulation of hydrodynamic characteristics during the diversion closure in a horizontal tunnel

Based on water inrush accident of 1841 working face of Desheng Coal Mine in Wu'an, Hebei province, China, an evaluation model of hydrodynamic characteristics of the project is set up and simulated using Matlab. It is assumed that the pipe flow would transform into seepage flow when the aggregates are plugged into the water inrush channel and the seepage flow would disappear along with grouting process. The simulation results show that the flow velocity will increase with an increase in height of aggregates accumulation body during the aggregates filling process; the maximum seepage velocity occurs on the top of plugging zone; and the water flow decreases with increasing plugging height of water inrush channel. Finally, the field construction results show that the water inrush channel can be plugged effectively by the compacted body prepared with aggregate and cement slurry.

Time-resolved K-shell x-ray spectra of nanosecond laser-produced titanium tracer in gold plasmas

A study of a nanosecond laser irradiation on the titanium-layer-buried gold planar target is presented. The timeresolved x-ray emission spectra of titanium tracer are measured by a streaked crystal spectrometer. By comparing the simulated spectra obtained by using the FLYCHK code with the measured titanium spectra, the temporal plasma states, i.e.,the electron temperatures and densities, are deduced. To evaluate the feasibility of using the method for the characterization of Au plasma states, the deduced plasma states from the measured titanium spectra are compared with the Multi-1D hydrodynamic simulations of laser-produced Au plasmas. By comparing the measured and simulated results, an overall agreement for the electron temperatures is found, whereas there are deviations in the electron densities. The experiment–theory discrepancy may suggest that the plasma state could not be well reproduced by the Multi-1D hydrodynamic simulation, in which the radial gradient is not taken into account. Further investigations on the spectral characterization and hydrodynamic simulations of the plasma states are needed. All the measured and FLYCHK simulated spectra are given in this paper as datasets. The datasets are openly available at http://www.doi.org/10.57760/sciencedb.j00113.00032.

Clinical value of intravesical prostatic protrusion in the evaluation and management of prostatic and other lower urinary tract diseases

Intravesical prostatic protrusion(IPP)has emerged as a new prostatic morphometric parameter of significance to aid the clinicians in various aspects of managing the patients with some diseases of the lower urinary tract and the prostate.These include but may not be limited to its role in such conditions as:bladder outlet obstruction,trial without catheter,medical treatment effect,progression of lower urinary tract symptoms related to benign prostatic hypertrophy(LUTS/BPH),risk factor for bladder stone in BPH,overactive bladder,prostate carcinoma,and early urinary continence recovery after laparoscopic radical prostatectomy.In this review,I will try to summarize the different researchers’efforts on the potential practical application of this clinical tool.Technology is ever evolving to help us in the diagnosis and management of our patients.However,we as clinicians should contemplate their cost and possible suffering for the patient by wise and judicious utilization based on our clinical experience and tools.IPP seems to be one such promising clinical tool.

HYDRODYNAMIC ANALYSIS AND SIMULATION OF A SWIMMING BIONIC ROBOT TUNA

A dynamic model for undulatory locomotion was proposed to study the swimming mechanism of a developed bionic robot tuna. On the basis of inviscid hydrodynamics and rigid-body dynamics, the momentum and propulsive force required for propelling the swimming robot tuna＇s flexible body was calculated. By solving the established dynamic equations and efficiency formula, the swimming velocity and propulsive efficiency of the bionic robot tuna were obtained. The relationship between the kinematic parameters of the robot tuna＇s body curve and the hydrodynamic performances was established and discussed after hydrodynamic simulations. The results presented in this article can be used to increase the swimming speed, propulsive thrust, and the efficiency of underwater vehicles effectively.

Hydrodynamic computational modelling and simulations of collisional shock waves in gas jet targets

We study the optimization of collisionless shock acceleration of ions based on hydrodynamic modelling and simulations of collisional shock waves in gaseous targets.The models correspond to the specifications required for experiments with the CO2 laser at the Accelerator Test Facility at Brookhaven National Laboratory and the Vulcan Petawatt system at Rutherford Appleton Laboratory.In both cases,a laser prepulse is simulated to interact with hydrogen gas jet targets.It is demonstrated that by controlling the pulse energy,the deposition position and the backing pressure,a blast wave suitable for generating nearly monoenergetic ion beams can be formed.Depending on the energy absorbed and the deposition position,an optimal temporal window can be determined for the acceleration considering both the necessary overdense state of plasma and the required short scale lengths for monoenergetic ion beam production.

An AMR Capable Finite Element Diffusion Solver for ALE Hydrocodes

We present a novel method for the solution of the diffusion equation on a composite AMR mesh. This approach is suitable for including diffusion based physics modules to hydrocodes that support ALE and AMR capabilities. To illustrate, we proffer our implementations of diffu- sion based radiation transport and heat conduction in a hydrocode called ALE-AMR. Numerical experiments conducted with the diffusion solver and associated physics packages yield 2nd order convergence in the L2 norm.

Calculating buoy response for a wave energy converter-A comparison of two computational methods and experimental results

When designing a wave power plant, reliable and fast simulation tools are required. Computational fluid dynamics （CFD） software provides high accuracy but with a very high computational cost, and in operational, moderate sea states, linear potential flow theories may be sufficient to model the hydrodynamics. In this paper, a model is built in COMSOL Multiphysics to solve for the hydrodynamic parameters of a point-absorbing wave energy device. The results are compared with a linear model where the hydrodynamical parameters are computed using WAMIT, and to experimental results from the Lysekil research site. The agreement with experimental data is good for both numerical models.

Design,Hydrodynamic Analysis,and Testing of a Bio-inspired Movable Bow Mechanism for the Hybrid-driven Underwater Glider

Hybrid-driven Underwater Glider(HUG)is a new type of underwater vehicle which integrates the functions of an Autonomous Underwater Glider(AUG)and an Autonomous Unmanned Vehicle(AUV).Although HUG has the characteristics of long endurance distance,its maneuverability still has room to be improved.This work introduces a new movement form of the neck of the underwater creature into HUG and proposes a parallel mechanism to adjust the attitude angle and displacement of the HUG’s bow,which can improve the steering maneuverability.Firstly,the influence of bow movement and rotation on the hydrodynamic force and flow field of the whole machine is analyzed by using the Computational Fluid Dynamics(CFD)method.The degree of freedom,attitude control range and movement amount of the Movable Bow Mechanism(MBM)are obtained,and then the design of MBM is completed based on these constraints.Secondly,the kinematic and dynamic models of MBM are established based on the closed vector method and the Lagrange equation,respectively,which are fully verified by comparing the results of simulation in Matlab and Adams software,then a Radial Basis Function(RBF)neural network adaptive sliding mode controller is designed to improve the dynamic response effect of the output parameters of MBM.Finally,a prototype of MBM is manufactured and assembled.The kinematic,dynamics model and controller are verified by experiments,which provides a basis for applying MBM in HUGs.

Design of Underwater Robot Lines Based on a Hybrid Automatic Optimization Strategy

In this paper, a hybrid automatic optimization strategy is proposed for the design of underwater robot lines. Isight is introduced as an integration platform. The construction of this platform is based on the user programming and several commercial software including UG6.0, GAMBIT2.4.6 and FLUENT12.0. An intelligent parameter optimization method, the particle swarm optimization, is incorporated into the platform. To verify the strategy proposed, a simulation is conducted on the underwater robot model 5470, which originates from the DTRC SUBOFF project. With the automatic optimization platform, the minimal resistance is taken as the optimization goal;the wet surface area as the constraint condition; the length of the fore-body, maximum body radius and after-body＇s minimum radius as the design variables. With the CFD calculation, the RANS equations and the standard turbulence model are used for direct numerical simulation. By analyses of the simulation results, it is concluded that the platform is of high efficiency and feasibility. Through the platform, a variety of schemes for the design of the lines are generated and the optimal solution is achieved. The combination of the intelligent optimization algorithm and the numerical simulation ensures a global optimal solution and improves the efficiency of the searching solutions.

The evolution characteristics of main waterways and their control mechanism in the radial sand ridges of the southern Yellow Sea

The comparison of the underwater topographic data in recent four decades shows that main waterways of the radial sand ridges area in the southern Yellow Sea tend to gradually migrate southward（scour depth and southward extension of the main channels in Xiyang, southward approach of Lanshayang Waterway and Xiaomiaohong Waterway on South Flank）. Although there are various hypotheses about the cause and mechanism of the overall southward migration of the radial sand ridges, no universal and reliable understanding has been obtained so far. The mechanism of this process becomes a challenging problem which serves a key issue in the morphodynamics of the radial sand ridges and the harbor construction in this area. On the basis of the shoreline positions and underwater terrains at different development stages of the Huanghe Delta coast in northern Jiangsu Province, China since the northward return of the Huanghe River and flowed into the Bohai Sea,combined with the tidal wave numerical simulation study, the characteristics and hydrodynamic changes of the tidal wave system in the southern Yellow Sea at different evolution stages are investigated. It is shown that due to the shoreline retreat and the erosion of underwater delta, tidal current velocity is enhanced, and the enhanced area gradually migrates southward. It is revealed that this southward migration of a large-scale regional hydrodynamic axis is possibly a dominant mechanism leading to the overall southward migration of the radial sand ridges.

Effect of the shaft eccentricity and rotational direction on the mixing characteristics in cylindrical tank reactors

Strategy of the shaft eccentricity is introduced to enhance the mixing characteristics in a flat bottomed cylindrical vessel without baffles. The mixing is ensured by a six-curved blade impeller. Three solutions which are models of food emulsions are used as working fluids. These solutions have a shear thinning behavior modeled by the power-law. The effects of fluid properties, stirring rates, impeller rotational direction and impeller eccentricity on the 3D flow fields and power consumption are investigated. Three values of impeller eccentricity are considered, namely 0%, 24% and 48% of the vessel diameter. It is found that the opposite clockwise rotational direction reduces the power consumption, compared with the clockwise rotational direction. Also, the obtained results show that an impeller placed at an eccentric position between 24% and 48% of the vessel diameter and at the third of the vessel height may ensure the best mixing characteristics.

Numerical simulation of flow hydrodynamics of struvite pellets in a liquid–solid fluidized bed

Phosphorus recovery in the form of struvite has been aroused in recent decades for its dual advantages in eutrophication control and resource protection.The usage of the struvite products is normally determined by the size which is largely depended on the hydrodynamics.In this study,flow behavior of struvite pellets was simulated by means of Eulerian–Eulerian two-fluid model combining with kinetic theory of granular flow in a liquid–solid fluidized bed reactor（FBR）.A parametric study including the mesh size,time step,discretization strategy,turbulent model and drag model was first developed,followed by the evaluations of crucial operational conditions,particle characteristics and reactor shapes.The results showed that a cold model with the mesh resolution of 16 × 240,default time step of 0.001 sec and first order discretization scheme was accurate enough to describe the fluidization.The struvite holdup profile using Syamlal–O＇Brien drag model was best fitted to the experimental data as compared with other drag models and the empirical Richardson–Zaki equation.Regarding the model evaluation,it showed that liquid velocity and particle size played important roles on both solid holdups and velocities.The reactor diameter only influenced the solid velocity while the static bed height almost took no effect.These results are direct and can be applied to guide the operation and process control of the struvite fluidization.Moreover,the model parameters can also be used as the basic settings in further crystallization simulations.

Hydrodynamics characterization of a choanoid fluidized bed bioreactor used in the bioartificial liver system： Fully resolved simulation with a fctitious domain method

Choanoid fluidized bed bioreactors （CFBBs） are newly developed core devices used in bioartificial liver- support systems to detoxify blood plasma of patients with microencapsulated liver cells. Direct numerical simulations （DNS） with a direct-forcing/fictitious domain （DF/FD） method were conducted to study the hydrodynamic performance of a CFBB. The effects of particle-fluid density ratio, particle number, and fil- ter screens preventing particles flowing out of the reactor were investigated. Depending on density ratio, two flow patterns are evident： the circulation mode in which the suspension rises along one sidewall and descends along the other sidewall, and the non-circulation mode in which the whole suspension roughly flows upward. The circulation mode takes place under non-neutral-buoyancy where the particle sedimentation dominates, whereas the non-circulation mode occurs under pure or near-neutral buoy- ancy with particle-fluid density ratios of unity or near unity. With particle-fluid density ratio of 1.01, the bioartificial liver reactor performs optimally as the significant particle accumulation existing in the non-circulation mode and the large shear forces on particles in the circulation mode are avoided. At higher particle volume fractions, more particles accumulate at the filter screens and a secondary counter circulation to the primary flow is observed at the top of the bed. Modelled as porous media, the filter screens play a negative role on particle fluidization velocities; without screens, particles are fluidized faster because of the higher fluid velocities in the jet center region. This work extends the DF/FD-based DNS to a fluidized bed and accounts for effects from inclined side walls and porous media, providing some hydrodynamics insight that is important for CFBB design and operation optimization.

A fluctuating lattice-Boltzmann model for direct numerical simulation of particle Brownian motion

A single-relaxation-time fluctuating lattice-Boltzmann （LB） model for direct numerical simulation （DNS） of particle Brownian motion is established by adding a fluctuating component to the lattice-Boltzmann equations （LBEs）. The fluctuating term is proved to be the random stress tensor in fluctuating hydrodynamics by recovering Navier-Stokes equations from LBEs through a Chapman-Enskog expansion. A three-dimensional implementation of the model is also presented, along with simulations of a single spherical particle and 125 spherical particles at short times. Numerical results including the meansquare displacement, velocity autocorrelation function and self-diffusion coefficient of particles compare favorably with theoretical results and previous numerical results.