Thiswork investigates an oblique stagnation point flowof hybrid nanofluid over a rigid surface with power lawfluidas lubricated layers. Copper (Cu) and Silver (Ag) solid particles are used as hybrid particles acting i...Thiswork investigates an oblique stagnation point flowof hybrid nanofluid over a rigid surface with power lawfluidas lubricated layers. Copper (Cu) and Silver (Ag) solid particles are used as hybrid particles acting in water H2O asa base fluid. The mathematical formulation of flow configuration is presented in terms of differential systemthat isnonlinear in nature. The thermal aspects of the flow field are also investigated by assuming the surface is a heatedsurface with a constant temperature T. Numerical solutions to the governing mathematical model are calculatedby the RK45 algorithm. The results based on the numerical solution against various flow and thermal controllingparameters are presented in terms of line graphs. The specific results depict that the heat flux increases over thelubricated-indexed parameter.展开更多
In current research, MWCNT-SiO_2/oil hybrid nano-lubricant viscosity is experimentally examined. By dispersing 0.05%, 0.1%, 0.2%, 0.4%, 0.8% and 1% volume of MWCNTs and SiO_2 nanoparticle into the engine oil SAE 20W50...In current research, MWCNT-SiO_2/oil hybrid nano-lubricant viscosity is experimentally examined. By dispersing 0.05%, 0.1%, 0.2%, 0.4%, 0.8% and 1% volume of MWCNTs and SiO_2 nanoparticle into the engine oil SAE 20W50, the temperature and solid volume fraction consequences were studied. At 40 to 100 ℃ temperature, the viscosities were assessed. The results indicated Newtonian behavior for the hybrid nano-lubricant. Moreover, solid volume fraction augmentation and temperature enhanced the viscosity enhancement of hybrid nano-lubricant. At highest solid volume fraction and temperature, nano-lubricant viscosity was 171% greater compared to pure 20W50. Existed models lack the ability to predict the hybrid nano-lubricant viscosity. Thus, a new correlation regarding solid volume fraction and temperature was suggested with R-squared of 0.9943.展开更多
The Kevlar/polytetrafluroethylene（Kevlar/PTFE） fabric composite can be used as a self-lubricating liner of the self-lubricating bearing.Many types of nano-particles can improve the tribological performance of the po...The Kevlar/polytetrafluroethylene（Kevlar/PTFE） fabric composite can be used as a self-lubricating liner of the self-lubricating bearing.Many types of nano-particles can improve the tribological performance of the polymer-based composite.Unfortunately,up to now,published work on the effect of nano-particles on the tribological performance of the fabric composite which can be used as a self-lubricating liner is quite scarce.Therefore,for the purpose of exploring a way to significantly improve the tribological performance of the fabric composite,the tribological performance of the Kevlar/PTFE fabric composite filled with nano-titania is evaluated by using the block-on-ring wear tester.The scanning electron microscopy is utilized to observe the morphologies of worn surfaces of the fabric composites and the counterparts.The tensile properties of the composites are evaluated on the universal material testing machine.The test results show that the addition of nano-titania at a proper mass fraction of the matrix resin improves the wear resistance and the tensile strength,decreases the friction coefficient,and makes the wear volume of the composite reach a relative steady state more quickly;plastic deformation and microcutting are important for the wear of the fabric composite;a lubricating layer is formed on the worn surface of the composite during sliding,and the lubricating layer is critical for the tribological performance of the composite;the formation and properties of the lubricating layer are influenced by the nano-titania particles.The proposed study on the effect of nano-titania on the tribological performance of the Kevlar/PTFE fabric composite,especially on the evolution of the worn surface of the composite,provides the basis for further understanding of the influence mechanism of the nano-particles on the tribological performance of the composite and explores a method of improving the tribological performance of the composite.展开更多
The water-lubricated conical bearing has attracted attentions of researchers for its simple structure,easily adjusted gap ( film thickness ) , lower friction loss, and less pollution in application. A mathematic model...The water-lubricated conical bearing has attracted attentions of researchers for its simple structure,easily adjusted gap ( film thickness ) , lower friction loss, and less pollution in application. A mathematic model with consideration of the effects of turbulence,two-phase flow,and temperature on the pressure field at bearing surface is proposed here. Using this model,the Reynolds' equation and energy equation are solved in which the thermo-physical properties of the water as lubricant are taken into account. The dependency of characteristics of bearing,such as load-carrying capacity,flow rate ( pumping losses ) ,and frictional losses,on angular velocity, conical angle, and radial eccentricities, is presented. The research results are beneficial to the improvement of the efficiency of conical bearing and the environmental protection.展开更多
文摘Thiswork investigates an oblique stagnation point flowof hybrid nanofluid over a rigid surface with power lawfluidas lubricated layers. Copper (Cu) and Silver (Ag) solid particles are used as hybrid particles acting in water H2O asa base fluid. The mathematical formulation of flow configuration is presented in terms of differential systemthat isnonlinear in nature. The thermal aspects of the flow field are also investigated by assuming the surface is a heatedsurface with a constant temperature T. Numerical solutions to the governing mathematical model are calculatedby the RK45 algorithm. The results based on the numerical solution against various flow and thermal controllingparameters are presented in terms of line graphs. The specific results depict that the heat flux increases over thelubricated-indexed parameter.
文摘In current research, MWCNT-SiO_2/oil hybrid nano-lubricant viscosity is experimentally examined. By dispersing 0.05%, 0.1%, 0.2%, 0.4%, 0.8% and 1% volume of MWCNTs and SiO_2 nanoparticle into the engine oil SAE 20W50, the temperature and solid volume fraction consequences were studied. At 40 to 100 ℃ temperature, the viscosities were assessed. The results indicated Newtonian behavior for the hybrid nano-lubricant. Moreover, solid volume fraction augmentation and temperature enhanced the viscosity enhancement of hybrid nano-lubricant. At highest solid volume fraction and temperature, nano-lubricant viscosity was 171% greater compared to pure 20W50. Existed models lack the ability to predict the hybrid nano-lubricant viscosity. Thus, a new correlation regarding solid volume fraction and temperature was suggested with R-squared of 0.9943.
文摘The Kevlar/polytetrafluroethylene（Kevlar/PTFE） fabric composite can be used as a self-lubricating liner of the self-lubricating bearing.Many types of nano-particles can improve the tribological performance of the polymer-based composite.Unfortunately,up to now,published work on the effect of nano-particles on the tribological performance of the fabric composite which can be used as a self-lubricating liner is quite scarce.Therefore,for the purpose of exploring a way to significantly improve the tribological performance of the fabric composite,the tribological performance of the Kevlar/PTFE fabric composite filled with nano-titania is evaluated by using the block-on-ring wear tester.The scanning electron microscopy is utilized to observe the morphologies of worn surfaces of the fabric composites and the counterparts.The tensile properties of the composites are evaluated on the universal material testing machine.The test results show that the addition of nano-titania at a proper mass fraction of the matrix resin improves the wear resistance and the tensile strength,decreases the friction coefficient,and makes the wear volume of the composite reach a relative steady state more quickly;plastic deformation and microcutting are important for the wear of the fabric composite;a lubricating layer is formed on the worn surface of the composite during sliding,and the lubricating layer is critical for the tribological performance of the composite;the formation and properties of the lubricating layer are influenced by the nano-titania particles.The proposed study on the effect of nano-titania on the tribological performance of the Kevlar/PTFE fabric composite,especially on the evolution of the worn surface of the composite,provides the basis for further understanding of the influence mechanism of the nano-particles on the tribological performance of the composite and explores a method of improving the tribological performance of the composite.
基金Natural Science Foundation of Heilongjiang Province of China (No.LC2009C05)
文摘The water-lubricated conical bearing has attracted attentions of researchers for its simple structure,easily adjusted gap ( film thickness ) , lower friction loss, and less pollution in application. A mathematic model with consideration of the effects of turbulence,two-phase flow,and temperature on the pressure field at bearing surface is proposed here. Using this model,the Reynolds' equation and energy equation are solved in which the thermo-physical properties of the water as lubricant are taken into account. The dependency of characteristics of bearing,such as load-carrying capacity,flow rate ( pumping losses ) ,and frictional losses,on angular velocity, conical angle, and radial eccentricities, is presented. The research results are beneficial to the improvement of the efficiency of conical bearing and the environmental protection.
