Novel nanoporous palladium catalyst for electroreduction of hydrogen peroxide

Titanium-supported nanoporous palladium catalyst （Pd/Ti） was prepared by a hydrothermal method using PdC12 as a precursor, ethylenediamine tetraacetic acid （EDTA） as a ligand, and formaldehyde as a reduction agent. Complex Pd-EDTA^2- is favorable for the formation of Pd particles with nanoscale sizes. The electroactivity of the Pd/Ti catalyst towards the electroreduction of hydrogen peroxide in 1 mol/L NaOH solution was evaluated by voltammetric techniques. Both linear scan voltammetric and chronoamperometric data present significantly large steady-state reduction current density of the hydrogen peroxide electroreduction on the prepared Pd/Ti catalyst. The results show that the prepared Pd/Ti catalyst is an effective electrocatalyst for the electroreduction of hydrogen peroxide in alkaline media.

Direct production of hydrogen peroxide over bimetallic CoPd catalysts:Investigation of the effect of Co addition and calcination temperature

A series of CoPd/KIT-6 bimetallic catalysts with various Co:Pd molar ratios at different calcination temperatures were prepared and used for the direct synthesis of H_(2)O_(2) from H_(2) and O_(2).These catalysts were characterized by nitrogen adsorption-desorption,low and wide-angle X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM),scanning electron microscopy(SEM),elemental mapping and energy-dispersive X-ray(EDX)methods.It was found that the particle size,electronic interactions,morphology,and textural properties of these catalysts as well as their catalytic activity in the reaction of H_(2) with O_(2) were affected by Co addition and different calcination temperatures.Also,the results showed that while the H_(2)O_(2) selectivity depends on Pd^(2+) species,the H_(2) conversion is related to Pd0 active sites.Among these catalysts,CoPd/KIT-6 calcined at 350℃(CoPd/KIT-350 catalyst)showed the best catalytic activity with 50%of H_(2)O_(2) selectivity and 51%conversion of H_(2).

Promotional effects of Sb on Pd-based catalysts for the direct synthesis of hydrogen peroxide at ambient pressure

TiO2‐supported Pd‐Sb bimetallic catalysts were prepared and evaluated for the direct synthesis of H2O2 at ambient pressure.The addition of Sb to Pd significantly enhanced catalytic performance,and a Pd50Sb catalyst showed the greatest selectivity of up to 73%.Sb promoted the dispersion of Pd on TiO2,as evidenced by transmission electron microscopy and X‐ray diffraction.X‐ray photoelectron spectroscopy indicated that the oxidation of Pd was suppressed by Sb.In addition,Sb2O3 layers were formed and partially wrapped the surfaces of Pd catalysts,thus suppressing the activation of H2 and subsequent hydrogenation of H2O2.In situ diffuse reflection infrared Fourier transform spectroscopy for CO adsorption suggested that Sb homogenously located on the surface of Pd‐Sb catalysts and isolated contiguous Pd sites,resulting in the rise of the ratio of Pd monomer sites that are favorable for H2O2 formation.As a result,the Sb modified Pd surfaces significantly enhanced the non‐dissociative activation of O2 and H2O2 selectivity.

Solar-Driven Hydrogen Peroxide Production Using Polymer-Supported Carbon Dots as Heterogeneous Catalyst

Safe, sustainable, and green production of hydro gen peroxide is an exciting proposition due to the role of hydrogen peroxide as a green oxidant and energy carrier for fuel cells. The current work reports the development of carbon dot-impregnated waterborne hyperbranched polyurethane as a heterogeneous photo-catalyst for solar-driven production of hydrogen peroxide. The results reveal that the carbon dots possess a suitable band-gap of 2.98 eV,which facilitates effective splitting of both water and ethanol under solar irradiation. Inclusion of the carbon dots within the eco-friendly polymeric material ensures their catalytic activity and also provides a facile route for easy catalyst separation, especially from a solubilizing medium.The overall process was performed in accordance with the principles of green chemistry using bio-based precursorsand aqueous medium. This work highlights the potential of carbon dots as an effective photo-catalyst.

Selective Oxidation of Toluene with Hydrogen Peroxide Catalyzed by V-Mo-based Catalyst

The selective catalytic oxidation of toluene with hydrogen peroxide over V-Mo-based catalysts under mild conditions was studied.The promotion effect of Mo on the catalysts was studied with V/Al2O3 and Mo/Al2O3 as reference samples.The catalysts were characterized by XRD,TPR,and XPS techniques.The results show that the addition of Mo to V/Al2O3 may change the distribution of V species on Al2O3 surface.Over V-Mo/Al2O3 catalyst,highly dispersed amorphous V species facilitates benzaldehyde formation,and crystalline V2O5 species increases the conversion of toluene but decreases the selectivity to benzaldehyde,while AlVMoO7 species favors both the conversion of toluene and the formation of cresols.The yield of benzaldehyde depends remarkably on the surface O/Al and Mo/V atomic ratios,and gets to a maximum value of 13.2% with a selectivity of 79.5% at an O/Al atomic ratio of 3.0 and Mo/V atomic ratio of 0.7.

Hydrogenation Behavior of Hydrogen Peroxide in a Microreactor

The hydrogenation of hydrogen peroxide is an unwanted side reaction in the direct synthesis of hydrogen peroxide and remains a problem to solve.The mechanism of this reaction has been studied with batch reactors but the slow heat and mass transfer in batch reactors hindered the understanding of its intrinsic kinetics.In this study,a microreactor is employed to investigate the parameters that influence the hydrogenation reaction,including flow rate,channel length,hydrogen pressure,solvent composition,and initial hydrogen peroxide concentration.The activity of different catalysts was compared and the hydrogenation law was confirmed,providing guiding information to better control the hydrogenation process.

Interfacial engineering of heterogeneous molecular electrocatalysts using ionic liquids towards efficient hydrogen peroxide production

Efficient and selective oxygen reduction reaction(ORR)electrocatalysts are critical to realizing decentralized H_(2)O_(2)production and utilization.Here we demonstrate a facile interfacial engineering strategy using a hydrophobic ionic liquid(IL,i.e.,[BMIM][NTF2])to boost the performance of a nitrogen coordinated single atom cobalt catalyst(i.e.),cobalt phthalocyanine(CoPc)supported on carbon nanotubes(CNTs).We find a strong correlation between the ORR performance of CoPc/CNT and the thickness of its IL coatings.Detailed characterization revealed that a higher O_(2)solubility(2.12×10^(−3)mol/L)in the IL compared to aqueous electrolytes provides a local O2 enriched surface layer near active catalytic sites,enhancing the ORR thermodynamics.Further,the hydrophobic IL can efficiently repel the as‐synthesized H_(2)O_(2)molecules from the catalyst surface,preventing their fast decomposition to H_(2)O,resulting in improved H_(2)O_(2)selectivity.Compared to CoPc/CNT without IL coatings,the catalyst with an optimal~8 nm IL coating can deliver a nearly 4 times higher mass specific kinetic current density and 12.5%higher H2O2 selectivity up to 92%.In a two‐electrode electrolyzer test,the optimal catalyst exhibits an enhanced productivity of 3.71 molH2O2 gcat^(–1)h^(–1),and robust stability.This IL‐based interfacial engineering strategy may also be extended to many other electrochemical reactions by carefully tailoring the thickness and hydrophobicity of IL coatings.

Multistage Extractive Reaction for Hydrogen Peroxide Production by Anthraquinone Process

The extractive reaction process of oxygen-working solution-water three-phase system for the production of hydrogen peroxide by the anthraquinone method was investigated in a sieve plate column of 50 mm in internal diameter. The oxidation reaction of anthrahydroquinone in the working solution with oxygen and the extraction of hydrogen peroxide from the working solution into aqueous phase occurred simultaneously in the countercurrent mode. The agitating effect caused by gaseous phase made the droplets of the dispersed phase become smaller, thus, increasing the liquid-liquid interfacial contact areas and resulting in the improvement of the mass transfer velocity. Results showed that the gas-agitation had a beneficial effect on the extraction of hydrogen peroxide from the working solution into the aqueous phase; the concentration of hydrogen peroxide in the raffinate decreased with the increase of the gaseous superficial velocities; and the concentration of H2O2 in the raffinate increased with the increase of the dispersed phase superficial velocity at the same superficial velocity of the gaseous phase. In the G-L-L extractive reaction process, with the increase of the gaseous superficial velocities, both the conversion of the anthrahydroquinone oxidation and the extraction efficiency of hydrogen peroxide first increased significantly, then increased gradually.

Preparation of palladium-based catalyst by plasma-assisted atomic layer deposition and its applications in CO_(2) hydrogenation reduction

Supported Pd catalyst is an important noble metal material in recent years due to its high catalytic performance in CO_(2)hydrogenation.A fluidized-bed plasma assisted atomic layer deposition(FP-ALD) process is reported to fabricate Pd nanoparticle catalyst over γ-Al_(2)O_(3)or Fe_(2)O_(3)/γ-Al_(2)O_(3)support,using palladium hexafluoroacetylacetonate as the Pd precursor and H_(2)plasma as counter-reactant.Scanning transmission electron microscopy exhibits that highdensity Pd nanoparticles are uniformly dispersed over Fe_(2)O_(3)/γ-Al_(2)O_(3)support with an average diameter of 4.4 nm.The deposited Pd-Fe_(2)O_(3)/γ-Al_(2)O_(3)shows excellent catalytic performance for CO_(2)hydrogenation in a dielectric barrier discharge reactor.Under a typical condition of H_(2)to CO_(2)ratio of 4 in the feed gas,the discharge power of 19.6 W,and gas hourly space velocity of10000 h^(-1),the conversion of CO_(2)is as high as 16.3% with CH_(3)OH and CH4selectivities of 26.5%and 3.9%,respectively.

Bicarbonate activation of hydrogen peroxide: A new emerging technology for wastewater treatment

The serious limitations of available technologies for decontamination of wastewater have compelled researchers to search for alternative solutions. Catalytic treatment with hydrogen peroxide, which appears to be one of the most efficient treatment systems, is able to degrade various organics with the help of powerful ·OH radicals. This review focuses on recent progress in the use of bicarbonate activated hydrogen peroxide for wastewater treatment. The introduction of bicarbonate to pollutant treatment has led to appreciable improvements, not only in process efficiency, but also in process stability. This review describes in detail the applications of this process in homogeneous and heterogeneous systems. The enhanced degradation, limited or lack of leaching during heterogeneous degradation, and prolonged catalysts stability during degradation are salient features of this system. This review provides readers with new knowledge regarding bicarbonate, including the fact that it does not always harm pollutant degradation, and can significantly benefit degradation under some conditions.

Advances in the production technology of hydrogen peroxide

This article mainly summarizes various aspects of hydrogen peroxide(H2O2)production through the anthraquinone route,including hydrogenation catalysts,working solution,regeneration technique,hydrogenation reactors,and environmental protection.The advances and breakthrough of SINOPEC in the production of H2O2 through the anthraquinone route is presented in this review,highlighting recent innovative technology on these aspects developed independently.The technical prospect and scientific challenges associated with the direct synthesis method from hydrogen and oxygen are also briefly discussed.

Direct synthesis of hydrogen peroxide over Pd nanoparticles embedded between HZSM-5 nanosheets layers

Direct synthesis of hydrogen peroxide(DSHP)was studied over Pd loaded on HZSM-5 nanosheets(Pd/ZN).Pd nanoparticles with average size of ca.4.3 nm were introduced into the adjacent nanosheet layers(thickness of ca.2.9 nm)by impregnation method.Pd/ZN with theoretical Si/Al molar ratio of 25 showed the highest selectivity for H2O2 among the prepared catalysts,together with highest formation rate of H2O2(38.0 mmol·(g cat)^-1·h^-1),1.9 times than that of Pd supported on conventional HZSM-5 zeolite(Pd/CZ-50).Better catalytic performance of nanosheet catalysts was attributed to the promoted Pd dispersion which promoted H2 dissociation,more BrΦnsted acid sites and stronger metal-support interaction which inhibited the dissociation of O-O bond in H2O2.The embedded structure sufficiently protected the Pd nanoparticles by space confinement which restrained the Pd leaching,leading to a better catalytic stability with 90%activity retained after 3 cycles,which was almost 3 times than that of Pd/CZ-50(30.4%activity retained).

Electrocatalytic generation of hydrogen peroxide on cobalt nanoparticles embedded in nitrogen-doped carbon

Electrocatalytic reduction of oxygen is a growing synthetic technique for the sustainable production of hydrogen peroxide(H_(2)O_(2)).The current challenges concern seeking low-cost,highly active,and selective electrocatalysts.Cobalt-nitrogen-doped carbon containing catalytically active cobalt-nitrogen(Co-N_(x))sites is an emerging class of materials that can promote the electrochemical generation of H_(2)O_(2).Here,we report a straightforward method for the preparation of cobalt-nitrogen-doped carbon composed of a number of Co-N_(x)moieties using low-energy dry-state ball milling,followed by controlled pyrolysis.This scalable method uses inexpensive materials containing cobalt acetate,2-methylimidazole,and Ketjenblack EC-600JD as the metal,nitrogen,and carbon precursors,respectively.Electrochemical measurements in an acidic medium show the present material exhibits a significant increase in the oxygen reduction reaction current density,accompanied by shifting the onset potential into the positive direction.The current catalyst has also demonstrated an approximate 90%selectivity towards H_(2)O_(2)across a wide range of potential.The H_(2)O_(2)production rate,as measured by H_(2)O_(2)bulk electrolysis,has reached 100 mmol g_(cat).^(–1)h^(–1)with high H_(2)O_(2)faradaic efficiency close to 85%(for 2 h at 0.3 V vs.RHE).Lastly,the catalyst durability has been tested(for 6 h at 0.3 V vs.RHE).The catalyst has shown relatively consistent performance,while the overall faradic efficiency reaches approximate 85%throughout the test cycle indicating the promising catalyst durability for practical applications.The formed Co-N_(x)moieties,along with other parameters,including the acidic environment and the applied potential,likely are the primary reasons for such high activity and selectivity to H_(2)O_(2)production.

Building highly active hybrid double-atom sites in C_(2)N for enhanced electrocatalytic hydrogen peroxide synthesis

Two-electron(2 e^(-))oxygen reduction reaction(ORR)shows great promise for on-site electrochemical synthesis of hydrogen peroxide(H_(2)O_(2)).However,it is still a great challenge to design efficient electrocatalysts for H_(2)O_(2)synthesis.To address this issue,the logical design of the active site by controlling the geometric and electronic structures is urgently desired.Therefore,using density functional theory(DFT)computations,two kinds of hybrid double-atom supported on C_(2)N nanosheet(RuCu@C_(2)N and PdCu@C_(2)N)are screened out and their H_(2)O_(2)performances are predicted.PdCu@C_(2)N exhibits higher activity for H_(2)O_(2)synthesis with a lower overpotential of 0.12 V than RuCu@C_(2)N(0.59 V),Ru_(3)Cu(110)facet(0.60 V),and PdCu(110)facet(0.54 V).In aqueous phase,the adsorbed O_(2)is further stabilized with bulk H_(2)0 and the thermodynamic rate-determining step of 2 e^(-) ORR change.The activation barrier on PdCu@C_(2)N is 0.43 eV lower than the one on RuCu@C_(2)N with 0.68 eV.PdCu@C_(2)N is near the top of 2 e^(-) ORR volcano plot,and exhibits high selectivity of H_(2)O_(2.)This work provides guidelines for designing highly effective hybrid double-atom electrocatalysts(HDACs)for H_(2)O_(2)synthesis.

The atomic interface effect of single atom catalysts for electrochemical hydrogen peroxide production

Producing hydrogen peroxide(H_(2)O_(2))through an electrochemical oxygen reduction reaction(ORR)is a safe,green strategy and a promising alternative to traditional energy-intensive anthraquinone processes.Air and renewable power could be utilized for onsite and decentralized H_(2)O_(2)production,demonstrating significant application potential.Currently,single atom catalysts(SACs)have demonstrated significant advantages in the catalytic production of H_(2)O_(2)in 2e−ORR.However,the selectivity of SACs in ORR once puzzled researchers.This article reviews the research on the development and achievements of H_(2)O_(2)production by SACs catalysis in recent years.Especially,the structure-performance relationship is a guide to designing new SACs.Combining advanced characterization techniques and theoretical calculation methods,researchers have a clearer and more thorough understanding of the impact of the atomic interface of SACs on ORR catalytic performance.The coordination moiety formed between the active metal center atom and the support seriously determines the selectivity of SACs,mainly manifested in the adsorption of*OOH intermediates.Particularly,the atomic interface of metal atoms together with O/N co-coordination exhibit high selectivity and mass activity,and heteroatoms or functional groups on carbon supports present synergistic effects to promote the production of H_(2)O_(2)in 2e−ORR.Fine and accurate regulation of the atomic interface of SACs directly affects the 2e−ORR performance of the catalysts.Therefore,it is important to deeply understand the atomic interface of SACs and contribute to the development of novel catalysts.

Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al_2O_3 layers had the larger pore size than those with SiO_2 and SiO_2\\Al_2O_3 layers. Catalytic hydrogenation of 2-ethylanthraquinone(eA Q), a key step of the H_2O_2 production by the anthraquinone process, over the various monolithic catalysts(60 °C, atmosphere pressure) showed that the monolithic catalyst with the moderate thickness of Al_2O_3 layer(about 6 μm) exhibited the highest conversion of e AQ(99.1%) and hydrogenation efficiency(10.0 g·L^(-1)). This could be ascribed to the suitable Pd penetration depth and the larger pore size, which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.

Effects of Cerium Dopant on Ni-B Amorphous Alloy Catalysts Used in 2-Ethylanthraquinone Hydrogenation

A series of Ce-doped Ni-B amorphous alloy catalysts were prepared by a KBH_4 reduction method, characterized by ICP, BET, XRD, H_2-chemisorption, H_2-TPD, etc., and tested in the hydrogenation of 2-ethylanthraquinone. The results of characterization show that with the addition of Ce the amount of H_2-chemisorption and H_2-TPD areas first increases markedly and then decreases with the maximum appears at the atomic ratio of Ce to Ni of 0.036. The hydrogenation activity also shows the same trend. The effects of Ce are attributed to its dispersion of Ni particles, resulting in the formation of more surface Ni centers. However, much higher Ce contents may result in the decrease of the surface Ni contents. After heat treatment at higher temperatures, the amorphous structure of Ni-B is destroyed.

Incorporating Sulfur Atoms into Palladium Catalysts by Reactive Metal–Support Interaction for Selective Hydrogenation

Developing highly active and selective catalysts for the hydrogenation of nitroarenes,an environmentally benign process to produce industrially important aniline intermediates,is highly desirable but very challenging.Pd catalysts are generally recognized as active but nonselective catalysts for this important reaction.Here,we report an effective strategy to greatly improve the selectivity of Pd catalysts based on the reactive metal–support interaction.

High-rate electrochemical H_(2)O_(2) production over multimetallic atom catalysts under acidic–neutral conditions

Hydrogen peroxide(H_(2)O_(2))production by the electrochemical 2-electron oxygen reduction reaction(2e−ORR)is a promising alternative to the energy-intensive anthraquinone process,and single-atom electrocatalysts show the unique capability of high selectivity toward 2e−ORR against the 4e−one.The extremely low surface density of the single-atom sites and the inflexibility in manipulating their geometric/electronic configurations,however,compromise the H_(2)O_(2) yield and impede further performance enhancement.Herein,we construct a family of multiatom catalysts(MACs),on which two or three single atoms are closely coordinated to form high-density active sites that are versatile in their atomic configurations for optimal adsorption of essential*OOH species.Among them,the Cox–Ni MAC presents excellent electrocatalytic performance for 2e−ORR,in terms of its exceptionally high H_(2)O_(2) yield in acidic electrolytes(28.96 mol L^(−1) gcat.^(−1) h^(−1))and high selectivity under acidic to neutral conditions in a wide potential region(>80%,0–0.7 V).Operando X-ray absorption and density functional theory analyses jointly unveil its unique trimetallic Co2NiN8 configuration,which efficiently induces an appropriate Ni–d orbital filling and modulates the*OOH adsorption,together boosting the electrocatalytic 2e−ORR capability.This work thus provides a new MAC strategy for tuning the geometric/electronic structure of active sites for 2e−ORR and other potential electrochemical processes.

Heterogeneous Green Catalyst for Oxidation of Cyclohexene and Cyclooctene with Hydrogen Peroxide in the Presence of Host （Nanocavity of Y-zeolite）/Guest （N4-Cu（II） Schiff Base Complex） Nanocomposite Material

Copper（If） complex of a Schiff base ligand derived from pyrrolcarbaldehyde and o-phenylenediamine （H2L） has been synthesized and encapsulated in Y-zeolite matrix. The hybrid material has been characterized by elemental analysis, IR and UV-Vis spectroscopic studies as well as X-ray diffraction （XRD） pattern. The encapsulated cop- per（II） catalyst is an active catalyst for the oxidation of cyclooctene and cyclohexene using H202 as oxidant. Under the optimized reaction conditions 81% conversion of cyclohexene with 65% selectivity for 2-cyclohexenone formation and 87% conversion of cyclooctene with 46% selectivity for epoxide formation were obtained.