The Ti（C,N）precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different ...The Ti（C,N）precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different morphologies of Ti（C,N）precipitate in hot strips.It is found that the Ti（C,N）precipitate in hot strip using Path 2（put into asbestos box and air cooled）are finer and much more in quantity than that in hot strip using Path 1（held at 730℃ for 30min and furnace cooled）.The morphology of Ti（C,N）precipitate in hot strip has great effect on recrystallization texture in the subsequent cold-rolled annealed sheet.γ-fiber texture of strong recrystallization is gained in coldrolled and annealed sheet came from Path 1.On the contrary,in the one came from Path 2,theγ-fiber texture is weak.This may be due to the pinning force of numerous fine Ti（C,N）precipitate which retard the growth of preferential nucleated{111}orientated grains.Annealed steel sheets in the test came from both paths have excellent fishscale resistance.展开更多
The effect of the amount of precipitant ammonia on the Cu0/Cu＋ratio of Cu/Si O2 prepared by the deposition–precipitation method is investigated. Species at different preparation stages, resulted from the amount of a...The effect of the amount of precipitant ammonia on the Cu0/Cu＋ratio of Cu/Si O2 prepared by the deposition–precipitation method is investigated. Species at different preparation stages, resulted from the amount of ammonia used, are identified by the XRD and FTIR techniques. Chrysocolla together with either copper nitrate hydroxide or copper hydroxide coexist in the uncalcined catalysts. Upon calcination, the latter two species are converted to Cu O particles while chrysocolla remains. Following reduction, Cu O is transformed to metallic Cu and chrysocolla is converted to Cu2 O. The value of Cu0/Cu＋ratio can be evaluated using the peak areas in their TPR profiles. Hydrogenation of dimethyl oxalate（DMO） to ethylene glycol（EG） shows that the selectivity of EG depends on the Cu0/Cu＋ratio. Catalyst prepared with the addition of ammonia solution at n（NH3）/n（Cu2＋） = 0.9 for precipitation–deposition gains a more suitable Cu0/Cu＋ratio upon reduction and thus has a higher selectivity for EG.展开更多
基金Sponsored by National Natural Science Foundation of China(50527402)National Basic Research Program(973Program)of China(2011CB606306-2)
文摘The Ti（C,N）precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different morphologies of Ti（C,N）precipitate in hot strips.It is found that the Ti（C,N）precipitate in hot strip using Path 2（put into asbestos box and air cooled）are finer and much more in quantity than that in hot strip using Path 1（held at 730℃ for 30min and furnace cooled）.The morphology of Ti（C,N）precipitate in hot strip has great effect on recrystallization texture in the subsequent cold-rolled annealed sheet.γ-fiber texture of strong recrystallization is gained in coldrolled and annealed sheet came from Path 1.On the contrary,in the one came from Path 2,theγ-fiber texture is weak.This may be due to the pinning force of numerous fine Ti（C,N）precipitate which retard the growth of preferential nucleated{111}orientated grains.Annealed steel sheets in the test came from both paths have excellent fishscale resistance.
基金Funding for the present study from the National Basic Research Program of China(973 Program,No.2011CB710800)the Opening Foundation(2014)of Zhejiang Zanyu Technology Co.,Ltd
文摘The effect of the amount of precipitant ammonia on the Cu0/Cu＋ratio of Cu/Si O2 prepared by the deposition–precipitation method is investigated. Species at different preparation stages, resulted from the amount of ammonia used, are identified by the XRD and FTIR techniques. Chrysocolla together with either copper nitrate hydroxide or copper hydroxide coexist in the uncalcined catalysts. Upon calcination, the latter two species are converted to Cu O particles while chrysocolla remains. Following reduction, Cu O is transformed to metallic Cu and chrysocolla is converted to Cu2 O. The value of Cu0/Cu＋ratio can be evaluated using the peak areas in their TPR profiles. Hydrogenation of dimethyl oxalate（DMO） to ethylene glycol（EG） shows that the selectivity of EG depends on the Cu0/Cu＋ratio. Catalyst prepared with the addition of ammonia solution at n（NH3）/n（Cu2＋） = 0.9 for precipitation–deposition gains a more suitable Cu0/Cu＋ratio upon reduction and thus has a higher selectivity for EG.
