The Effect of Hydrostatic Pressure Fields on the Dispersion Characteristics of Fluid-shell Coupled System

The effect of hydrostatic pressure on the vibration dispersion characteristics of fluid-shell coupled structures was studied.Both fluid-loaded cylindrical shells and fluid-filled cylindrical shells were considered.Numerical analysis was applied to solve the dispersion equations for shells filled with or loaded with fluid at various hydrostatic pressures.The results for external pressure showed that non-dimensional axial wave numbers are nearly independent when the pressure is below the critical level.The influence of internal pressure on wave numbers was found significant for the real branch s=1 and the complex branches of dispersion curves.The presence of internal pressure increased the cut on frequencies for the branch s=1 for high order wave modes.

Emulsifying property,antioxidant activity,and bitterness of soybean protein isolate hydrolysate obtained by Corolase PP under high hydrostatic pressure

Enzymatic hydrolysis of proteins can enhance their emulsifying properties and antioxidant activities.However,the problem related to the hydrolysis of proteins was the generation of the bitter taste.Recently,high hydrostatic pressure(HHP)treatment has attracted much interest and has been used in several studies on protein modification.Hence,the study aimed to investigate the effects of enzymatic hydrolysis by Corolase PP under different pressure treatments(0.1,100,200,and 300 MPa for 1-5 h at 50℃)on the emulsifying property,antioxidant activity,and bitterness of soybean protein isolate hydrolysate(SPIH).As observed,the hydrolysate obtained at 200 MPa for 4 h had the highest emulsifying activity index(47.49 m^(2)/g)and emulsifying stability index(92.98%),and it had higher antioxidant activities(44.77%DPPH free radical scavenging activity,31.12%superoxide anion radical scavenging activity,and 61.50%copper ion chelating activity).At the same time,the enhancement of emulsion stability was related to the increase of zeta potential and the decrease of mean particle size.In addition,the hydrolysate obtained at 200 MPa for 4 h had a lower bitterness value and showed better palatability.This study has a broad application prospect in developing food ingredients and healthy foods.

Test for the deep:magnetic loading characterization of elastomers under extreme hydrostatic pressures

Soft robot incarnates its unique advantages in deep-sea exploration,but grapples with high hydrostatic pressure’s unpredictable impact on its mechanical performances.In our previous work,a self-powered soft robot showed excellent work performance in the Mariana Trench at a depth of 11000 m,yet experienced notable degradation in deforming capability.Here,we propose a magnetic loading method for characterizing elastomer’s mechanical properties under extremely high hydrostatic pressure of up to 120 MPa.This method facilitates remote loading and enables in-situ observation,so that the dimensions and deformation at high hydrostatic pressure are obtained and used for calculations.The results reveal that the Young’s modulus of Polydimethylsiloxane(PDMS)monotonously increases with pressure.It is found that the relative increase in Young’s modulus is determined by its initial value,which is 8% for an initial Young’s modulus of 2200 kPa and 38% for 660 kPa.The relation between initial Young’s modulus and relevant increase can be fitted by an exponential function.The bulk modulus of PDMS is about 1.4 GPa at 20℃ and is barely affected by hydrostatic pressure.The method can quantify alterations in the mechanical properties of elastomers induced by hydrostatic pressure,and provide guidance for the design of soft robots which serve in extreme pressure environment.

High Hydrostatic Pressure Exacerbates Bladder Fibrosis through Activating Piezo1

Objective Bladder outlet obstruction(BOO)results in significant fibrosis in the chronic stage and elevated bladder pressure.Piezo1 is a type of mechanosensitive(MS)channel that directly responds to mechanical stimuli.To identify new targets for intervention in the treatment of BOO-induced fibrosis,this study investigated the impact of high hydrostatic pressure(HHP)on Piezo1 activity and the progression of bladder fibrosis.Methods Immunofluorescence staining was conducted to assess the protein abundance of Piezo1 in fibroblasts from obstructed rat bladders.Bladder fibroblasts were cultured under normal atmospheric conditions(0 cmH_(2)O)or exposed to HHP(50 cmH_(2)O or 100 cmH_(2)O).Agonists or inhibitors of Piezo1,YAP1,and ROCK1 were used to determine the underlying mechanism.Results The Piezo1 protein levels in fibroblasts from the obstructed bladder exhibited an elevation compared to the control group.HHP significantly promoted the expression of various pro-fibrotic factors and induced proliferation of fibroblasts.Additionally,the protein expression levels of Piezo1,YAP1,ROCK1 were elevated,and calcium influx was increased as the pressure increased.These effects were attenuated by the Piezo1 inhibitor Dooku1.The Piezo1 activator Yoda1 induced the expression of pro-fibrotic factors and the proliferation of fibroblasts,and elevated the protein levels of YAP1 and ROCK1 under normal atmospheric conditions in vitro.However,these effects could be partially inhibited by YAP1 or ROCK inhibitors.

Numerical Simulation of Extrusion Pressure in the Process of Hydrostatic Extrusion

In order to study the laws of the extrusion pressure changing with the extrusion parameters in the process of hydrostatic extrusion for the tungsten alloys, the large deformation elasto plastic theory and the software of ANSYS 5 5 are used to carry out the numerical simulation research. The laws of the extrusion pressure changing with the extrusion parameters, such as the die angle, extrusion ratio, and friction coefficient, are obtained. The simulation results are in good agreement with the experimental ones, and the simulated results are believable.

Theoretical Analysis and Numerical Simulation of the Static and Dynamic Characteristics of Hydrostatic Guides Based on Progressive Mengen Flow Controller

The oil film thickness of oil hydrostatic guide with constant pressure supply based on capillary restrictor is greatly affected by load, and this kind of hydrostatic guide is usually applied to the machine tools with moderate load. The static and dynamic characteristics of the guide have been studied by using some theoretical, numerical and experimental approaches, and some methods and measures have been proposed to improve its performances. The hydrostatic guide based on progressive mengen（PM） flow controller is especially suitable for the heavy numerical control（NC） machine tools. However, few literatures about the research on the static and dynamic characteristics of the hydrostatic guides based on PM flow controller are reported. In this paper, the formulae are derived for analyzing the static and dynamic characteristics of hydrostatic guides with rectangle pockets and PM flow controller according to the theory of hydrostatic bearing. On the basis of the analysis of hydrostatic bearing with circular pocket, some equations are derived for solving the static pressure, volume pressure and squeezing pressure which influence the dynamic characteristics of hydrostatic guides with rectangle pocket. The function and the influencing factors of three pressures are clarified. The formulae of amplitude-frequency characteristics and dynamic stiffness of the hydrostatic guide system are derived. With the help of software MATLAB, programs are coded with C＋＋ language to simulate numerically the static and dynamic characteristics of the hydrostatic guide based on PM flow controller. The simulation results indicate that the sensitive oil volume between the outlet of the PM flow controller and the guide pocket has the greatest influence on the characteristics of the guide, and it should be reduced as small as possible when the field working condition is met. Choosing the oil with a greater viscosity is also helpful in improving the dynamic performance of hydrostatic guides. The research work has instructing significance for analyzing and designing the guide with PM flow controller.

Processing and characterization of AZ91 magnesium alloys via a novel severe plastic deformation method:Hydrostatic cyclic extrusion compression(HCEC)

Capability of a novel severe plastic deformation(SPD)method of hydrostatic cyclic extrusion compression(HCEC)for processing of hcp metallic rods with high length to diameter ratios was investigated.The process was conducted in two consecutive cycles on the AZ91 magnesium alloy,and microstructural evolution,mechanical properties and corrosion behavior were investigated.The results showed that the HCEC process was successively capable of producing ultrafine-grained long magnesium rods.Its ability in improving strength and ductility simultaneously was also shown.The ultimate tensile strength and elongation to failure of the sample after the second cycle of the process were improved to be 2.46 and 3.8 times those of the as-cast specimen,respectively.Distribution of the microhardness after the second cycle was uniform and its average value was increased by 116%.The potentials derived from the polarization curves were high and the currents were much low for the processed samples.Also,the diameter of the capacitive arcs derived from the Nyquist curves was large in the HCEC processed samples.The finite element analysis indicated the independency of HCEC load from the length in comparison to the conventional CEC.HCEC is a unique SPD method,which can produce long ultrafine-grained rods with a combination of superior mechanical and corrosion properties.

Processing of AM60 magnesium alloy by hydrostatic cyclic expansion extrusion at elevated temperature as a new severe plastic deformation method

Hydrostatic cyclic expansion extrusion(HCEE) process at elevated temperatures is proposed as a method for processing less deformable materials such as magnesium and for producing long ultrafine-grained rods. In the HCEE process at elevated temperatures, high-pressure molten linear low-density polyethylene(LLDPE) was used as a fluid to eliminate frictional forces. To study the capability of the process,AM60 magnesium rods were processed and the properties were investigated. The mechanical properties were found to improve significantly after the HCEE process. The yield and ultimate strengths increased from initial values of 138 and 221 MPa to 212 and 317 MPa, respectively.Moreover, the elongation was enhanced due to the refined grains and the existence of high hydrostatic pressure. Furthermore, the microhardness was increased from HV 55.0 to HV 72.5. The microstructural analysis revealed that ultrafine-grained structure could be produced by the HCEE process. Moreover, the size of the particles decreased, and these particles thoroughly scattered between the grains. Finite element analysis showed that the HCEE was independent of the length of the sample, which makes the process suitable for industrial applications.

Thermal Fluid-Solid Interaction Model and Experimental Validation for Hydrostatic Mechanical Face Seals

Hydrostatic mechanical face seals for reactor coolant pumps are very important for the safety and reliability of pressurized-water reactor power plants.More accurate models on the operating mechanism of the seals are needed to help improve their performance.The thermal fluid–solid interaction（TFSI）mechanism of the hydrostatic seal is investigated in this study.Numerical models of the flow field and seal assembly are developed.Based on the mechanism for the continuity condition of the physical quantities at the fluid–solid interface,an on-line numerical TFSI model for the hydrostatic mechanical seal is proposed using an iterative coupling method.Dynamic mesh technology is adopted to adapt to the changing boundary shape.Experiments were performed on a test rig using a full-size test seal to obtain the leakage rate as a function of the differential pressure.The effectiveness and accuracy of the TFSI model were verified by comparing the simulation results and experimental data.Using the TFSI model,the behavior of the seal is presented,including mechanical and thermal deformation,and the temperature field.The influences of the rotating speed and differential pressure of the sealing device on the temperature field,which occur widely in the actual use of the seal,are studied.This research proposes an on-line and assembly-based TFSI model for hydrostatic mechanical face seals,and the model is validated by full-sized experiments.

Dynamic ModeⅡfracture behavior of rocks under hydrostatic pressure using the short core in compression(SCC)method

The shear failure of rocks under both a static triaxial stress and a dynamic disturbance is common in deep underground engineering and it is therefore essential for the design of underground engineering to quantitively estimate the dynamic ModeⅡfracture toughness KⅡCof rocks under a triaxial stress state.However,the method for determining the dynamic KⅡCof rocks under a triaxial stress has not been developed yet.With an optimal sample preparation,the short core in compression(SCC)method was designed and verified in this study to measure the dynamic KⅡCof Fangshan marble(FM)subjected to different hydrostatic pressures through a triaxial dynamic testing system.The formula for calculating the dynamic KⅡCof the rock SCC specimen under hydrostatic pressures was obtained by using the finite element method in combination with secondary cracks.The experimental results indicate that the failure mode of the rock SCC specimen under a hydrostatic pressure is the shear fracture and the KⅡCof FM increases as the loading rate.In addition,at a given loading rate the dynamic rock KⅡCis barely affected by hydrostatic pressures.Another important observation is that the dynamic fracture energy of FM enhances with loading rates and hydrostatic pressures.

Load-induced error identification of hydrostatic turntable and its influence on machining accuracy

In heavy duty machine tools, hydrostatic turntable is often used as a means for providing rotational motion and supporting workpiece, so the accuracy of turntable is crucial for part machining. In order to analyze the influence of load-indcued errors on machining accuracy, an identification model of load-induced errors based on the deformation caused by applied load of hydrostatic turntable of computerized numerical control(CNC) gantry milling heavy machine is proposed. Based on multi-body system theory and screw theory, the space machining accuracy model of heavy duty machine tool is established with consideration of identified load-induced errors. And then, the influence of load-induced errors on space machining accuracy and the roundness error of a milled hole is analyzed. The analysis results show that load-induced errors have a big influence on the roundness error of machined hole, especially when the center of the milled hole is far from that of hydrostatic turntable.

Thermal Influence of the Couette Flow in a Hydrostatic Spindle on the Machining Precision

Hydrostatic spindles are increasingly used in precision machine tools. Thermal error is the key factor affecting the machining accuracy of the spindle, and research has focused on spindle thermal errors through examination of the influence of the temperature distribution, thermal deformation and spindle mode. However, seldom has any research investigated the thermal effects of the associated Couette flow. To study the heat transfer mechanism in spindle systems, the criterion of the heat transfer direction according to the temperature distribution of the Couette flow at different temperatures is deduced. The method is able to deal accurately with the significant phenomena occurring at every place where thermal energy flowed in such a spindle system. The variation of the motion error induced by thermal effects on a machine work-table during machining is predicated by establishing the thermo-mechanical error model of the hydrostatic spindle for a high precision machine tool. The flow state and thermal behavior of a hydrostatic spindle is analyzed with the evaluated heat power and the coefficients of the convective heat transfer over outer surface of the spindle are calculated, and the thermal influence on the oil film stiffness is evaluated. Thermal drift of the spindle nose is measured with an inductance micrometer, the thermal deformation data 1.35 μm after running for 4 h is consistent with the value predicted by the finite element analysis’s simulated result 1.28 μm, and this demonstrates that the simulation method is feasible. The thermal effects on the processing accuracy from the flow characteristics of the fluid inside the spindle are analyzed for the first time.

Effect of Working Position on Vertical Motion Straightness of Open Hydrostatic Guideways in Grinding Machine

Hydrostatic guideways have various applications in precision machine tools due to their high motion accuracy. The analysis of motion straightness in hydrostatic guideways is generally ignoring the external load on the slider. A variation force also exists, caused by the different working positions, together with the dead load of the slider and that of other auxiliary devices. The effect of working position on vertical motion straightness is investigated based on the equivalent static model, considering the error averaging effort of pressured oil film in open hydrostatic guideways. Open hydrostatic guideways in LGF1000 are analyzed with this approach. The theoretical results show that the slider has maximum vertical motion straightness when the working position is closer the guiderail of Y axis. The vertical motion straightness reaches a minimum value as the working position is located at the center of the two guiderails on the Y axis. The difference between the maximum and minimum vertical motion straightness is 34.7%. The smaller vertical motion straightness is attributed to the smaller spacing of the two pads centers, along the Y direction. The experimental results show that the vertical motion straightness is 4.15 μm/1200 mm, when the working position is located in the middle of the Xbeam, and 5.08 pro/1200 mm, when the working position is approaching the Y guiderails, denoting an increase of 18.3%. The changing trends of the measured results validate the correctness of the theoretical model. The research work can be used to reveal the variation law of accuracy of the open hydrostatic guideways, under different working positions, to predict the machining precision, and provides the basis for an error compensation strategy for gantry type grinding machines.

Optimization of Inactivation Conditions of High Hydrostatic Pressure Using Response Surface Methodology

Response surface methodology (RSM) was employed in the present work and a second orderquadratic equation for high hydrostatic pressure (HHP) inactivation was built. Theadequacy of the model equation for predicting the optimum response values was verifiedeffectively by the validation data. Effects of temperature, pressure, and pressureholding time on HHP inactivation of Escherichia coli ATCC 8739 were explored. Byanalyzing the response surface plots and their corresponding contour plots as well assolving the quadratic equation, the optimum process parameters for inactivation E. coliof six log cycles were obtained as: temperature 32.2℃, pressure 346.4 MPa, and pressureholding time 12.6min.

Study on hydrostatic gas lubricated non-contacting mechanical seal

The principle and characteristics of hydrostatic gas lubricated non-contacting mechanical seal （HSGLNMS） are introduced. The flow field of the gas film is established by numerical analysis of end faces of HSGLNMS. The distribution of gas film pressure and seal performance parameters inclu- ding opening force and leakage are obtained. Influence of operating parameters and sealing configu- ration on the sealing performance is studied. HSGLNMS has been designed and manufactured. Its working film thickness and leakage are measured to verify the theoretical analysis. The investigation results show that HSGLNMS demonstrates good speed adaptability, which means that the seal runs successfully with both low and high speed, showing excellent performance. The seal can be regula- ted and controlled online ; the opening force will not be raised greatly with the increasing of the num- ber of throttle orifices, but the leakage of seal increases apparently ; the uniform pressure groove im- proves the sealing performance, for example, opening force and stiffness are raised obviously. While leakage is reduced. Finally, the theoretical analysis is verified by experiment.

Simulation and experimental study on lubrication characteristics of vertical hydrostatic guide rails

In order to improve the cutting stiffness,the paper studies the vertical hydrostatic bearing in the slide when a ram is in feed process.The change of the oil film thickness on hydrostatic guide rail and the curve of the oil film thickness in various cutting forces are calculated and a relation model through theoretical analysis method is derived.The pressure field of the guide rail recess is simulated based on the finite volume method and demonstrated through experiments.The study is of vital theoretical significance for the improvement of machining accuracy of numerical control machines and the entire computer numerical control(CNC) equipment and provides valuable theoretical basis for the design of hydrostatic guide rail in engineering practice.

Buckling of composite cylindrical shells with ovality and thickness variation subjected to hydrostatic pressure

The initial geometric imperfection is one of the primary factors affecting the buckling behaviors of composite cylindrical shells under hydrostatic pressure.In this study,ovality and thickness variations as two representative types of the geometric imperfections are considered.After measuring the geometric imperfections,a typical carbon fiber reinforced polymers(CFRP)cylindrical shell is tested to obtain the buckling pressure.The buckling behaviors of the shell sample are analyzed in combination with the strain responses.By using the nonlinear numerical analysis,the buckling shapes of the CFRP cylinder shells with different combinations of ovality and thickness variation are firstly discussed.The rules of influence of such imperfections on the buckling pressure are then obtained by nonlinear regression method.Finally,an empirical formula is proposed to predict the buckling pressure of the composite cylinder shells,and the calculated results from the formula are in good agreement with the numerical results.

Study on Steering Control Strategy for High-Speed Tracked Vehicle with Hydrostatic Drive

Steering control strategy for high-speed tracked vehicle with hydrostatic drive is designed based on analyzing the fundamental steering theories of the hydrostatic drive tracked vehicle. The strategy is completed by the cooperation between integrated steering control unit and pump ＆ motor displacement controller. The steering simulation is conducted by using Simulink of Matlab. It is indicated that this steering control strategy can reduce the average vehicle speed automatically to achieve the driver＇s expected steering radius exactly in the case of en- suring not exceeding the system pressure threshold and no sideslip.

The impact of high hydrostatic pressure treatment time on the structure,gelatinization and thermal properties and in vitro digestibility of oat starch

As a non-thermal processing technology,high hydrostatic pressure(HHP)can be used for starch modification without affecting the quality and flavour constituents.The effect of HHP on starch is closely related to the treatment time of HHP.In this paper,we investigated the impacts of HHP treatment time(0,5,10,15,20,25,30 min)on the microstructure,gelatinization and thermal properties as well as in vitro digestibility of oat starch by scanning electron microscopy,X-ray diffraction,Fourier transform infrared spectroscopy,13C NMR and differential scanning calorimeter.Results showed that 5-min HHP treatment led to deformation and decreases in short-range ordered and doublehelix structures of oat starch granules,and further extending the treatment time to 15 min or above caused the formation of a gelatinous connection zone,increase of particle size,disintegration of short-range ordered and double-helix structures,and crystal structure change from A type to V type,indicating gelatinization occurred.Longer treatment time also resulted in the reduction in both the viscosity and the stability of oat starch.These indicated that HHP treatment time greatly influenced the microstructure of oat starch,and the oat starch experienced crystalline destruction(5 min),crystalline disintegration(15 min)and gelatinization(>15 min)during HHP treatment.Results of in vitro digestibility showed that the rapidly digestible starch(RDS)content declined first after treatment for 5 to 10 min then rose with the time extending from 15 to 30 min,indicating that longer pressure treatment time was unfavourable to the health benefits of oat starch for humans with diabetes and cardiovascular disease.Therefore,the 500-MPa treatment time for oat starch is recommended not more than 15 min.This study provides theoretical guidance for the application of HHP technology in starch modification and development of health foods.

Polyploidy induction by hydrostatic pressure shock and embryo development of sea cucumber Apostichopus japonicus

The manipulation of the chromosome set for commercially valuable marine animals is important for enhancing aquacultural production. In this study, triploid and tetraploid sea cucumber Apostichopus japonicus were induced by hydrostatic pressure shock, and the conditions of appropriate induction were tested with different starting times, and hydrostatic pressure intensities and durations. The highest rate of triploid induction reached 20% and that of tetraploid was 60%. In consideration of the survival rate and hatch rate, the appropriate treatment for triploid was 55 Mpa of hydrostatic pressure for 5 rain at 55 min after fertilization （a.f.）, while for tetraploid it was 60 Mpa for 5 rain at 61 min a.f. The triploid of the sea cucumber could survive through the pelagic larval stage and attachment stage, and develop like the control group of the experiment. The tetraploid, however, could not survive the attachment stage.