The dynamic surface self-reconstruction behavior in local structure correlates with oxygen evolution reaction(OER)performance,which has become an effective strategy for constructing the catalytic active phase.However,...The dynamic surface self-reconstruction behavior in local structure correlates with oxygen evolution reaction(OER)performance,which has become an effective strategy for constructing the catalytic active phase.However,it remains a challenge to understand the mechanisms of reconstruction and to accomplish it fast and deeply.Here,we reported a photo-promoted rapid reconstruction(PRR)process on Ag nanoparticle-loaded amorphous Ni-Fe hydroxide nanosheets on carbon cloth for enhanced OER.The photogenerated holes generated by Ag in conjunction with the anodic potential contributed to a thorough reconstruction of the amorphous substrate.The valence state of unsaturated coordinated Fe atoms,which serve as active sites,is significantly increased,while the corresponding crystalline substrate shows little change.The different structural evolutions of amorphous and crystalline substrates during reconstruction lead to diverse pathways of OER.This PRR utilizing loaded noble metal nanoparticles can accelerate the generation of active species in the substrate and increase the electrical conductivity,which provides a new inspiration to develop efficient catalysts via reconstruction strategies.展开更多
Designing efficient and long-lasting non-metal electrocatalysts is an urgent task for addressing the issue of kinetic hysteresis in electrochemical oxidation reactions.The bimetallic hydroxides,catalyzing the oxygen e...Designing efficient and long-lasting non-metal electrocatalysts is an urgent task for addressing the issue of kinetic hysteresis in electrochemical oxidation reactions.The bimetallic hydroxides,catalyzing the oxygen evolution reaction(OER),have significant research potential because hydroxide reconstruction to generate an active phase is a remarkable advantage.Herein,the complete reconstruction of ultrathin CoNi(OH)_(2) nanosheets was achieved by embedding Ag nanoparticles into the hydroxide to induce a spontaneous redox reaction(SRR),forming heterojunction Ag@CoNi(OH)_(2) for bifunctional hydrolysis.Theoretical calculations and in situ Raman and ex situ characterizations revealed that the inductive effect of the Ag cation redistributed the charge to promote phase transformation to highly activate Ag-modified hydroxides.The Co-Ni dual sites in Co/NiOOH serve as novel active sites for optimizing the intermediates,thereby weakening the barrier formed by OOH^*.Ag@CoNi(OH)_(2) required a potential of 1.55 V to drive water splitting at a current density of 10 mA cm^(-2),with nearly 98.6% Faraday efficiency.Through ion induction and triggering of electron regulation in the OER via the synergistic action of the heterogeneous interface and surface reconstruction,this strategic design can overcome the limited capacity of bimetallic hydroxides and bridge the gap between the basic theory and industrialization of water decomposition.展开更多
In this article,we report a 3D NiFe phosphite oxyhydroxide plastic electrode using high-resolution digital light processing(DLP)3D-printing technology via induced chemical deposition method.The as-prepared 3D plastic ...In this article,we report a 3D NiFe phosphite oxyhydroxide plastic electrode using high-resolution digital light processing(DLP)3D-printing technology via induced chemical deposition method.The as-prepared 3D plastic electrode exhibits no template requirement,freedom design,low-cost,robust,anticorrosion,lightweight,and micro-nano porous characteristics.It can be drawn to the conclusion that highly oriented open-porous 3D geometry structure will be beneficial for improving surface catalytic active area,wetting performance,and reaction–diffusion dynamics of plastic electrodes for oxygen evolution reaction(OER)catalysis process.Density functional theory(DFT)calculation interprets the origin of high activity of NiFe(PO_(3))O(OH)and demonstrates that the implantation of the–PO_(3)can effectively bind the 3d orbital of Ni in NiFe(PO_(3))O(OH),lead to the weak adsorption of intermediate,make electron more active to improve the conductivity,thereby lowing the transform free energy of*O to*OOH.The water oxidization performance of as-prepared 3D NiFe(PO_(3))O(OH)hollow tubular(HT)lattice plastic electrode has almost reached the state-of-the-art level compared with the as-reported large-current-density catalysts or 3D additive manufactured plastic/metal-based electrodes,especially for high current OER electrodes.This work breaks through the bottleneck that plagues the performance improvement of low-cost high-current electrodes.展开更多
Magnesium(Mg)is a widely used and attractive metal,known for its unique physical and chemical properties,and it has been employed in the manufacture of many practical materials.Layered Double Hydroxides(LDHs),particul...Magnesium(Mg)is a widely used and attractive metal,known for its unique physical and chemical properties,and it has been employed in the manufacture of many practical materials.Layered Double Hydroxides(LDHs),particularly Mg-based LDHs,rank among the most prevalent two-dimensional materials utilized in separation processes,which include adsorption,extraction,and membrane technology.The high popularity of Mg-based LDHs in separation applications can be attributed to their properties,such as excellent hydrophilicity,high surface area,ion exchangeability,and adjustable interlayer space.Currently,polymer membranes play a pivotal role in semi-industrial and industrial separation processes.Consequently,the development of polymer membranes and the mitigation of their limitations have emerged as compelling topics for researchers.Several methods exist to enhance the separation performance and anti-fouling properties of polymer membranes.Among these,incorporating additives into the membrane polymer matrix stands out as a cost-effective,straightforward,readily available,and efficient approach.The use of Mg-based LDHs,either in combination with other materials or as a standalone additive in the polymer membrane matrix,represents a promising strategy to bolster the separation and anti-fouling efficacy of flat sheet mixed matrix polymer membranes.This review highlights Mg-based LDHs as high-potential additives designed to refine flat sheet mixed matrix polymer membranes for applications in wastewater treatment and brackish water desalination.展开更多
Strategy of anchoring alloy nanoparticles made up of the efficient catalytic element(e.g.,Ni,Fe)on dodecyl sulfate(DS^(-))-intercalated NiFe layered double hydroxides(DS^(-)-NiFe LDH)obtained by a convenient one-step ...Strategy of anchoring alloy nanoparticles made up of the efficient catalytic element(e.g.,Ni,Fe)on dodecyl sulfate(DS^(-))-intercalated NiFe layered double hydroxides(DS^(-)-NiFe LDH)obtained by a convenient one-step hydrothermal coprecipitation method for essentially enhancing oxygen evolution reaction(OER)performance was proposed.The results of structural characterization indicate Pt_(2)FeNi alloy nanoparticles evenly distribute on the surface of DS^(-)-NiFe LDH.The sizes of the Pt_(2)FeNi nanoparticles,closely related to their OER performance,could be wellcontrolled by adjusting the amount of H;PtCl;addition.The composite structure of as-prepared product was stable during processes of synthesis,exfoliation,self-assembly,and subsequent electrocatalytic OER.Rigorous electrochemical test proving the contributing catalytic active sites was located at the interface between Pt_(2)FeNi and DS^(-)-NiFe LDH,and the Ni and Fe were the major active elements while O atoms are adsorption sites.The formation of Pt_(2)FeNi nanoparticles could greatly prompt the reduction of Tafel slope.The best-performing Pt_(2)FeNi/DS^(-)-NiFe LDH with a Pt content of 0.98 wt%achieved low overpotential of 204 mV at 10 mA cm^(-2)and 262 mV at 50 mA cm^(-2).This work provides a convenient and effective strategy to create additional active sites for enhancing OER performance of NiFe LDH and make contribution to its wide application.展开更多
Rationally manipulating surface reconstruction of catalysts for water oxidation,inducing formation and dynamic accumulation of catalytically active centers still face numerous challenges.Herein,the introduction of[Cr(...Rationally manipulating surface reconstruction of catalysts for water oxidation,inducing formation and dynamic accumulation of catalytically active centers still face numerous challenges.Herein,the introduction of[Cr(C_(2)O_(4))_(3)]^(3-)into NiFe LDHs by intercalation engineering to promote surface reconstruction achieves an advanced oxygen evolution reaction(OER)activity.In view of the weak electronegativity of Cr^(3+) in[Cr(C_(2)O_(4))_(3)]^(3-),the intercalation of[Cr(C_(2)O_(4))_(3)]^(3-)is expected to result in an electron-rich structure of Fe sites in NiFe LDHs,and higher valence state of Ni can be formed with the charge transfer between Fe and Ni.The optimized electronic structure of NiFe-[Cr(C_(2)O_(4))_(3)]^(3-)-LDHs with more active Ni^(3+) species and the expedited dynamic generation of Ni^(3+) (Fe)OOH phase during the OER process contributed to its excellent catalytic property,revealed by in situ X-ray absorption spectroscopy,Raman spectroscopy,and quasi-in situ X-ray photoelectron spectroscopy.With the modulated electronic structure of metal sites,NiFe-[Cr(C_(2)O_(4))_(3)]^(3-)-LDHs exhibited promoted OER property with a lower overpotential of 236 mV at the current density of 10 mA cm^(-2).This work illustrates the intercalation of conjugated anion to dynamically construct desired Ni^(3+) sites with the optimal electronic environment for improved OER electrocatalysis.展开更多
We report a facile way to prepare sulfur(S) doped Ni4/5 Fe1/5-layered double hydroxide(LDH) electrocatalysts for oxygen evolution reaction(OER). The influence of S doping amount on the OER activity of the resulted Ni ...We report a facile way to prepare sulfur(S) doped Ni4/5 Fe1/5-layered double hydroxide(LDH) electrocatalysts for oxygen evolution reaction(OER). The influence of S doping amount on the OER activity of the resulted Ni Fe-LDHs was studied and the optimal surface S content was ca. 0.43 at%. The developed S-doped Ni Fe-LDH exhibits excellent OER catalyst activity in 1.0 M KOH with overpotential of only 257 m V at the current density of 10 m A cm^-2. Moreover, the catalyst could maintain high activity after 30 h stability test. The high activity of the S-doped Ni Fe-LDH catalysts may originate from the synergistic effect between S and the Fe sites. This work provides a simple but efficient way to improve the OER performance of transition metal oxides/(oxy)hydroxides.展开更多
Monolithic catalysts for CO_(2) methanation have become an active research area for the industrial development of Power-to-Gas technology.In this study,we developed a facile and reproducible synthesis strategy for the...Monolithic catalysts for CO_(2) methanation have become an active research area for the industrial development of Power-to-Gas technology.In this study,we developed a facile and reproducible synthesis strategy for the preparation of structured NiFe catalysts on washcoated cordierite monoliths for CO_(2) methanation.The NiFe catalysts were derived from in-situ grown layered double hydroxides(LDHs)via urea hydrolysis.The influence of different washcoat materials,i.e.,alumina and silica colloidal suspensions on the formation of LDHs layer was investigated,together with the impact of total metal concentration.NiFe LDHs were precipitated on the exterior surface of cordierite washcoated with alumina,while it was found to deposit further inside the channel wall of monolith washcoated with silica due to different intrinsic properties of the colloidal solutions.On the other hand,the thickness of in-situ grown LDHs layers and the catalyst loading could be increased by high metal concentration.The best monolithic catalyst(COR-AluCC-0.5M)was robust,having a thin and well-adhered catalytic layer on the cordierite substrate.As a result,high methane yield was obtained from CO_(2) methanation at high flow rate on this structured NiFe catalysts.The monolithic catalysts appeared as promising structured catalysts for the development of industrial methanation reactor.展开更多
基金This work was supported by the National Natural Science Foundation of China(52073008,52272181)the China Postdoctoral Science Foundation(2023T160036).
文摘The dynamic surface self-reconstruction behavior in local structure correlates with oxygen evolution reaction(OER)performance,which has become an effective strategy for constructing the catalytic active phase.However,it remains a challenge to understand the mechanisms of reconstruction and to accomplish it fast and deeply.Here,we reported a photo-promoted rapid reconstruction(PRR)process on Ag nanoparticle-loaded amorphous Ni-Fe hydroxide nanosheets on carbon cloth for enhanced OER.The photogenerated holes generated by Ag in conjunction with the anodic potential contributed to a thorough reconstruction of the amorphous substrate.The valence state of unsaturated coordinated Fe atoms,which serve as active sites,is significantly increased,while the corresponding crystalline substrate shows little change.The different structural evolutions of amorphous and crystalline substrates during reconstruction lead to diverse pathways of OER.This PRR utilizing loaded noble metal nanoparticles can accelerate the generation of active species in the substrate and increase the electrical conductivity,which provides a new inspiration to develop efficient catalysts via reconstruction strategies.
基金supported by the Inner Mongolia R&D Program Plan(2021ZD0042,2021EEDSCXSFQZD006)the National Natural Science Foundation of China(21902123)the Natural Science Basic Research Program of Shaanxi(2023-JC-ZD-22)。
文摘Designing efficient and long-lasting non-metal electrocatalysts is an urgent task for addressing the issue of kinetic hysteresis in electrochemical oxidation reactions.The bimetallic hydroxides,catalyzing the oxygen evolution reaction(OER),have significant research potential because hydroxide reconstruction to generate an active phase is a remarkable advantage.Herein,the complete reconstruction of ultrathin CoNi(OH)_(2) nanosheets was achieved by embedding Ag nanoparticles into the hydroxide to induce a spontaneous redox reaction(SRR),forming heterojunction Ag@CoNi(OH)_(2) for bifunctional hydrolysis.Theoretical calculations and in situ Raman and ex situ characterizations revealed that the inductive effect of the Ag cation redistributed the charge to promote phase transformation to highly activate Ag-modified hydroxides.The Co-Ni dual sites in Co/NiOOH serve as novel active sites for optimizing the intermediates,thereby weakening the barrier formed by OOH^*.Ag@CoNi(OH)_(2) required a potential of 1.55 V to drive water splitting at a current density of 10 mA cm^(-2),with nearly 98.6% Faraday efficiency.Through ion induction and triggering of electron regulation in the OER via the synergistic action of the heterogeneous interface and surface reconstruction,this strategic design can overcome the limited capacity of bimetallic hydroxides and bridge the gap between the basic theory and industrialization of water decomposition.
基金the National Natural Science Foundation of China(52001173&52100190)the Jiangsu Specially-Appointed Professor Program,Natural Science Foundation of Jiangsu Province(BK20200970&BK20210834)+2 种基金General Project of Natural Science Research in Jiangsu Colleges and Universities(20KJB530011&20KJB430046)Research Fund of Nantong University(03083054)National College Students'innovation and entrepreneurship training program(202110304019Z)for financial support.
文摘In this article,we report a 3D NiFe phosphite oxyhydroxide plastic electrode using high-resolution digital light processing(DLP)3D-printing technology via induced chemical deposition method.The as-prepared 3D plastic electrode exhibits no template requirement,freedom design,low-cost,robust,anticorrosion,lightweight,and micro-nano porous characteristics.It can be drawn to the conclusion that highly oriented open-porous 3D geometry structure will be beneficial for improving surface catalytic active area,wetting performance,and reaction–diffusion dynamics of plastic electrodes for oxygen evolution reaction(OER)catalysis process.Density functional theory(DFT)calculation interprets the origin of high activity of NiFe(PO_(3))O(OH)and demonstrates that the implantation of the–PO_(3)can effectively bind the 3d orbital of Ni in NiFe(PO_(3))O(OH),lead to the weak adsorption of intermediate,make electron more active to improve the conductivity,thereby lowing the transform free energy of*O to*OOH.The water oxidization performance of as-prepared 3D NiFe(PO_(3))O(OH)hollow tubular(HT)lattice plastic electrode has almost reached the state-of-the-art level compared with the as-reported large-current-density catalysts or 3D additive manufactured plastic/metal-based electrodes,especially for high current OER electrodes.This work breaks through the bottleneck that plagues the performance improvement of low-cost high-current electrodes.
文摘Magnesium(Mg)is a widely used and attractive metal,known for its unique physical and chemical properties,and it has been employed in the manufacture of many practical materials.Layered Double Hydroxides(LDHs),particularly Mg-based LDHs,rank among the most prevalent two-dimensional materials utilized in separation processes,which include adsorption,extraction,and membrane technology.The high popularity of Mg-based LDHs in separation applications can be attributed to their properties,such as excellent hydrophilicity,high surface area,ion exchangeability,and adjustable interlayer space.Currently,polymer membranes play a pivotal role in semi-industrial and industrial separation processes.Consequently,the development of polymer membranes and the mitigation of their limitations have emerged as compelling topics for researchers.Several methods exist to enhance the separation performance and anti-fouling properties of polymer membranes.Among these,incorporating additives into the membrane polymer matrix stands out as a cost-effective,straightforward,readily available,and efficient approach.The use of Mg-based LDHs,either in combination with other materials or as a standalone additive in the polymer membrane matrix,represents a promising strategy to bolster the separation and anti-fouling efficacy of flat sheet mixed matrix polymer membranes.This review highlights Mg-based LDHs as high-potential additives designed to refine flat sheet mixed matrix polymer membranes for applications in wastewater treatment and brackish water desalination.
基金the financial support by the National Natural Science Foundation of China(51874357,51872333,U20A20123)Innovative Research Group of Hunan Provincial Natural Science Foundation of China(2019JJ10006)support from Shenghua Scholar Program of Central South University.R.M.acknowledges support from JSPS KAKENNHI(18H03869)。
文摘Strategy of anchoring alloy nanoparticles made up of the efficient catalytic element(e.g.,Ni,Fe)on dodecyl sulfate(DS^(-))-intercalated NiFe layered double hydroxides(DS^(-)-NiFe LDH)obtained by a convenient one-step hydrothermal coprecipitation method for essentially enhancing oxygen evolution reaction(OER)performance was proposed.The results of structural characterization indicate Pt_(2)FeNi alloy nanoparticles evenly distribute on the surface of DS^(-)-NiFe LDH.The sizes of the Pt_(2)FeNi nanoparticles,closely related to their OER performance,could be wellcontrolled by adjusting the amount of H;PtCl;addition.The composite structure of as-prepared product was stable during processes of synthesis,exfoliation,self-assembly,and subsequent electrocatalytic OER.Rigorous electrochemical test proving the contributing catalytic active sites was located at the interface between Pt_(2)FeNi and DS^(-)-NiFe LDH,and the Ni and Fe were the major active elements while O atoms are adsorption sites.The formation of Pt_(2)FeNi nanoparticles could greatly prompt the reduction of Tafel slope.The best-performing Pt_(2)FeNi/DS^(-)-NiFe LDH with a Pt content of 0.98 wt%achieved low overpotential of 204 mV at 10 mA cm^(-2)and 262 mV at 50 mA cm^(-2).This work provides a convenient and effective strategy to create additional active sites for enhancing OER performance of NiFe LDH and make contribution to its wide application.
基金support from the National Natural Science Foundation of China(51402100,21905088,21573066 and U19A2017)the Provincial Natural Science Foundation of Hunan(2020JJ5044,2022JJ10006)。
文摘Rationally manipulating surface reconstruction of catalysts for water oxidation,inducing formation and dynamic accumulation of catalytically active centers still face numerous challenges.Herein,the introduction of[Cr(C_(2)O_(4))_(3)]^(3-)into NiFe LDHs by intercalation engineering to promote surface reconstruction achieves an advanced oxygen evolution reaction(OER)activity.In view of the weak electronegativity of Cr^(3+) in[Cr(C_(2)O_(4))_(3)]^(3-),the intercalation of[Cr(C_(2)O_(4))_(3)]^(3-)is expected to result in an electron-rich structure of Fe sites in NiFe LDHs,and higher valence state of Ni can be formed with the charge transfer between Fe and Ni.The optimized electronic structure of NiFe-[Cr(C_(2)O_(4))_(3)]^(3-)-LDHs with more active Ni^(3+) species and the expedited dynamic generation of Ni^(3+) (Fe)OOH phase during the OER process contributed to its excellent catalytic property,revealed by in situ X-ray absorption spectroscopy,Raman spectroscopy,and quasi-in situ X-ray photoelectron spectroscopy.With the modulated electronic structure of metal sites,NiFe-[Cr(C_(2)O_(4))_(3)]^(3-)-LDHs exhibited promoted OER property with a lower overpotential of 236 mV at the current density of 10 mA cm^(-2).This work illustrates the intercalation of conjugated anion to dynamically construct desired Ni^(3+) sites with the optimal electronic environment for improved OER electrocatalysis.
文摘We report a facile way to prepare sulfur(S) doped Ni4/5 Fe1/5-layered double hydroxide(LDH) electrocatalysts for oxygen evolution reaction(OER). The influence of S doping amount on the OER activity of the resulted Ni Fe-LDHs was studied and the optimal surface S content was ca. 0.43 at%. The developed S-doped Ni Fe-LDH exhibits excellent OER catalyst activity in 1.0 M KOH with overpotential of only 257 m V at the current density of 10 m A cm^-2. Moreover, the catalyst could maintain high activity after 30 h stability test. The high activity of the S-doped Ni Fe-LDH catalysts may originate from the synergistic effect between S and the Fe sites. This work provides a simple but efficient way to improve the OER performance of transition metal oxides/(oxy)hydroxides.
文摘Monolithic catalysts for CO_(2) methanation have become an active research area for the industrial development of Power-to-Gas technology.In this study,we developed a facile and reproducible synthesis strategy for the preparation of structured NiFe catalysts on washcoated cordierite monoliths for CO_(2) methanation.The NiFe catalysts were derived from in-situ grown layered double hydroxides(LDHs)via urea hydrolysis.The influence of different washcoat materials,i.e.,alumina and silica colloidal suspensions on the formation of LDHs layer was investigated,together with the impact of total metal concentration.NiFe LDHs were precipitated on the exterior surface of cordierite washcoated with alumina,while it was found to deposit further inside the channel wall of monolith washcoated with silica due to different intrinsic properties of the colloidal solutions.On the other hand,the thickness of in-situ grown LDHs layers and the catalyst loading could be increased by high metal concentration.The best monolithic catalyst(COR-AluCC-0.5M)was robust,having a thin and well-adhered catalytic layer on the cordierite substrate.As a result,high methane yield was obtained from CO_(2) methanation at high flow rate on this structured NiFe catalysts.The monolithic catalysts appeared as promising structured catalysts for the development of industrial methanation reactor.
