Trade-offs between ion-conducting and mechanical properties: The case of polyacrylate electrolytes

Polymer electrolytes(PEs)have been long recognized as the key materials to enable energy-dense batteries and render flexible energy devices practically viable,owing to their chemical and mechanical reliability.However,much of their promise is yet to be realized.The roomtemperature ion conductivity of existing PEs still falls short of the implementation criterion of 10^(-4) S cm^(-1) on the promise of acceptable mechanical properties,thereby precluding their practical application.The twin but inversely related duties of polymers,that is,functioning as both an ion-conducting medium and a structural backbone,underlie this issue but are less elucidated systematically.The polyacrylate(PA)family is among promising polymer matrices on account of ester polarity,electrode compatibility,chemical tunability,and mechanical durability.The extensive applicability of PA in plasticized gels,dry solids,and emerging composites makes PA-based PEs representative to illustrate the trade-off between ion conduction and mechanical strength.We herein seek to outline the stated long-standing conflict exemplified by PA-based PEs,focusing on crucial strategies toward balancing and reconciling the two mutually exclusive properties,with the intention of offering designing guidelines for next-generation PEs.

Preparation and Thermo-Responsive Properties of Poly(Oligo(Ethylene Glycol)Methacrylate)Copolymers with Hydroxy-Terminated Side Chain

Thermo-responsive random copolymers,poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-(ethylene glycol)methyl ether methacrylate)(P(EO_(2)-co-EO_(4/5)))and poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-ethylene glycol methacrylate(P(EO2-co-EG4/5))are synthesized via atom transfer radical polymerization(ATRP).The successful synthesis and the narrow polydispersity index(PDI)of two copolymers are indicated by 1H nuclear magnetic resonance(1H-NMR)and gel permeation chromatography(GPC)analyses.The transition behaviors of polymers in the aqueous solution are demonstrated by changes in turbidity and particle sizes.The transition behavior of P(EO2-co-EG4/5)is found to be milder than that of P(EO2-co-EO4/5).Moreover,the presence of hydrogen bonds without thermo-responsive properties established by hydroxyl groups in the end-side chain of P(EO_(2)-co-EG_(4/5))hinders the dehydration at the transition temperature(TT).Attenuated total reflection Fourier transform infrared spectrometry(ATR-FTIR)analysis along with contact angle measurements reveals that both P(EO_(2)-co-EO_(4/5))and P(EO_(2)-co-EG_(4/5))films undergo phase transitions from hydrophilicity to hydrophobicity above TT.By examining the swelling and collapse behaviors of the polymer films during phase transitions,it can be concluded that the end hydroxyl groups may establish hydrogen bonds with neighboring ether groups within the films,which remain intact throughout the phase transition process due to their strong bonding interactions.This leads to an increase in steric hindrance within swollen films thereby impeding dehydration processes and inducing hysteresis during phase transitions.

Quantitative lithium substitution of carboxyl hydrogens in polyacrylic acid binder enables robust SiO electrodes with durable lithium storage stability

The design of advanced binders plays a critical role in stabilizing the cycling performance of large-volume-effect silicon monoxide(SiO)anodes.For the classic polyacrylic acid(PAA)binder,the self-association of-COOH groups in PAA leads to the formation of intramolecular and intermolecular hydrogen bonds,greatly weakening the bonding force of the binder to SiO surface.However,strengthening the binder-material interaction from the perspective of binder molecular regulation poses a significant challenge.Herein,a modified PAA-Li_(x)(0.25≤x≤1)binder with prominent mechanical properties and adhesion strength is specifically synthesized for SiO anodes by quantitatively substituting the carboxylic hydrogen with lithium.The appropriate lithium substitution(x=0.25)not only effectively increases the number of hydrogen bonds between the PAA binder and SiO surface owing to charge repulsion effect between ions,but also guarantees moderate entanglement between PAA-Li_x molecular chains through the ion-dipole interaction.As such,the PAA-Li_(0.25)/SiO electrode exhibits exceptional mechanical properties and the lowest volume change,as well as the optimum cycling(1237.3 mA h g^(-1)after 100cycles at 0.1 C)and rate performance(1000.6 mA h g^(-1)at 1 C),significantly outperforming the electrode using pristine PAA binder.This work paves the way for quantitative regulation of binders at the molecular level.

Adsorption of sodium polyacrylate at interface of dicalcium silicate-sodium aluminate solution

The adsorption isotherm of sodium polyacrylate on dicalcium silicate（2CaO-SiO2） in sodium aluminate solution at 80 ℃ was studied.The type of surface adsorption of sodium polyacrylate is saturated adsorption,and the adsorption behavior belongs to L-type,according with the monolayer adsorption model of Langmuir equation.The surface coverage of sodium polyacrylate is 1.06 mol/μm2.The relation curve between the surface pressure and the molecular area of adsorption film was obtained by Gibbs formula.The variation of interfacial energy caused by adsorption as well as the relationship between the relation curve and the type of adsorption was discussed.

SYNTHESIS AND APPLICATION OF NEW DETERGENT BUILDER POLYACRYLATE SODIUM

The low molecular weight polyacrylate sodium (PAA Na) detergent builder was synthesized with K 2S 2O 8 as initiator in a neutral aqueous medium. The influences of reaction conditions on the viscosity average molecular weight were studied. The critical value of synthetic PAA Na inhibiting the precipitation of CaCO 3 was determined and compared with that of other common builders. It is confirmed from SEM graphs that PAA Na can make CaCO 3 crystal defective. Washing tests show synthetic PAA Na can partially replace sodium tripolyphosphate (STPP) and is a potential polymeric detergent builder in low phosphate powder detergents.

QSPR Study on the Glass Transition Temperature of Polyacrylates

Structural parameters of 22 polyacrylic compounds were computed at two levels using Hartree-Fock and DFT methods. Based on the experimental data of glass transition temperature （Tg）, four-parameter （energy of the lowest unoccupied molecular orbital （ELoMO）, the highest positive charge （Qmax^＋）, dipole moments（μ） and the next highest occupied molecular orbital （ENLOMO）） dependent equations were developed using structural parameters as theoretical descriptors. Especially, Tg dependent equation calculated at the HF/6-31G（d） level is more advantageous than others in view of their correlation and predictive abilities. This dependent equation was validated by variance inflation factors （VIF） and t-test methods.

Influence of Carboxyl Groups on the Particle Size and Rheological Properties of Polyacrylate Latices

The PAL was synthesized with BA,MMA and some monomers containing carboxyl groups（for example,acrylic acid（AA） and methacrylic acid（MAA）） as co-monomers by semi-continuous seeded emulsion polymerization technique.The influences of alkalinization temperature,the feeding manner of AA or MAA on the particles size,rheological properties and carboxyl distribution of the latex were discussed,and the rheological mechanism was analyzed.The experimental results show that the PAL system has preferable viscosity and particle size when the alkalinization temperature is 50 ℃.Different distribution of carboxyl group in the particles and different resultant rheological properties are obtained by different feeding manner of AA or MAA into the system.The TEM images show that the particle is a smooth globe with carboxyl group concentrating on the surface and stabilized with electric double layer and nonionic adsorbed layer.The concentration of carboxyl functional group on the surface of particles can be achieved by the specific polymerization technique.The rheologyical properties are determined by accretion of particle volume and variation of the two phase volume ratio resulted from the carboxyl group spreading layer.

Synthesis and Characterization of Fluorine-containing Polyacrylate Emulsion with Core-Shell Structure

A fluorine-containing polyacrylate copolymer emulsion was synthesized by a seed emulsion polymerization method, in which methyl methacrylate （MMA） and butyl acrylate （BA） were used as main monomers and hexafluorobutyl methacrylate （HFMA） as fluorine-containing monomer. The structure and properties were characterized by Fourier transform infrared spectrum （FT-IR）, transmission electron microscopy （TEM）, particle size analysis, X-ray photoelectron spectroscopy （XPS）, contact angle （CA）, differential scanning calorimetry （DSC） and thermogravimetry （TG） analysis. The FTIR and TEM results showed that HFMA was effectively involved in the emulsion copolymerization, and the formed emulsion particles had a core-shell structure and a narrow particle size distribution. XPS and CA analysis revealed that a gradient concentration of fluorine existed in the depth profile of fluorine-containing emulsion film which was richer in fluorine and more hydrophobic in one side. DSC and TG analysis also showed that a clear core-shell structure existed in the fluorine-containing emulsion particles, and their film showed higher thermal stability than that of fluorine-free emulsion.

SYNTHESIS, CROSSLINKING MECHANISM AND PROPERTIES OF A POLYACRYLATE/POLYURETHANE COMPOSITE COATING

A polyacrylate/polyurethane (P(A)/P(U)) composite coating has been prepared by crosslinking an acetoacetylated polyacrylate with a vinylic group terminated polyurethane at room temperature. A model Michael reaction between ethyl acetoacetate (EAA) and methyl acrylate (MA) was designed to study the crosslinking mechanism. It was found that the two active hydrogen atoms in acetoacetyl group can both add to vinylic groups and the yield of mono-and bis-adducts are much affected by the molar ratio of acetoacetyl to vinylic groups. Higher crosslinking degree and better properties could be obtained with decreasing the molar ratio of the two active groups from 1/1 to 0.6/1 in the composite coatings.

Properties of Polyacrylate Latex Prepared Under Different Emulsified Systems

The polyacrylate latexes were synthesized via pre-emulsified and semi-continuous seeded emulsion polymerization technology when conventional surfactant or polymerizable surfactant was used as emulsifiers. The resultant latexes and their films were characterized with the contact angle determinator and rheometer. Effect of the polymerizable surfactant on water resistance, stability and rheology of the latex was studied. Results show that the water resistance of film is increased first then decreased with the increase of the amount of the polymerizable surfactant. There exists the optimum value of the amount of the polymerizable surfactant for the water resistance of the film. In comparison with the latex prepared with the conventional surfactant, both the mechanical stability and the freezing-thaw stability of the latex are improved when the polymerizable surfactant is used during the course of the emulsion polymerization. The resultant latex has rheological properties of pseudo-plastic fluid and belongs to non-Newtonian fluid.

Investigation on the Use of the Weakly Basic Polyacrylate Anion-Exchanger Amberlite IRA-68 for Sorption and Separation of Iminodiacetate Complexes of Rare Earth Elements

Based on the determined affinity series of rare earth element complexes with IMDA for the anion-exchangers, purification of macroquantities of Nd 3+ from Y 3+, Sm 3+ from Ho 3+, La 3+ from Nd 3+ and La 3+ from Pr 3+ on the weakly basic gel anion-exchanger Amberlite IRA-68 was studied. Using the presented method on 1 L of Amberlite IRA-68 in the acetate form, it is possible to obtain about 240 g Nd 2O 3 purified from Y 2O 3. Great difference in affinity of La 3+ and Nd 3+ as well as Pr 3+ complexes for this anion-exchanger in the acetate form indicates the possibility of applying this process for purification of lanthanum on the increased scale. On 1 L of Amberilte IRA-68 in the acetate form it is possible to obtain about 1125 g La 2O 3 purified from Nd 2O 3. On the basis of these results it can be assumed that unique properties of polyacrylate anion-exchangers enable their application for separation of rare earth elements.

Determination of Ni^(2+) in Waters with Sodium Polyacrylate as a Binding Phase in Diffusive Gradients in Thin-films

An aqueous solution containing sodium polyacrylate（PAAS） was used in diffusive gradient in thin-films technique（DGT） to measure DGT-labile Ni2＋ concentrations.The DGT devices（PAAS DGT） were validated in four types of solutions,including synthetic river water containing metal ions with complexing EDTA or that without complexing EDTA,natural river water（Ling River,Jinzhou,China） spiked with Ni2＋,and an industrial wastewater （Jinzhou,China）.Results show that only free metal ions were measured by PAAS DGT,recovery=97.36% in the solutions containing only free metal ions,recovery=49.62% in a solution with metal/EDTA molar ratio of 2：1 and recovery=0 in the solutions with metal/EDTA molar ratios of 1：1 and 1：2.These indicated that the complexes of Ni-EDTA were DGT-inert.The DGT performance in spiked river water（recovery=18.24%） and in industrial wastewater（recovery=12.25%） were investigated,which indicated that the measurement of metals by this DGT device did not include the humic substances complexed fractions of metals.The binding properties of PAAS DGT for Ni2＋ were investigated under different conditions of pH value and ionic strength.Conditional stability constants（lgK） of PAAS-Ni complexes were also evaluated.

Studies on the Morphology of Natural Rubber/Polyacrylate Interpenetrating Polymer Networks

The interpenetrating polymer network(IPN) systems have attracted a lot of attention because of their unique two-phase structure and properties. There have been many publications concerning the IPNs in which poly (isoprene) (PIP) or polyacrylates (PAC) is formed as one of the networks.In the present study, Four serles of natural rubber(NR)/PAC IPNs were prepared and their morphologies were investigated with dynamic mechanics analysis(DMA) and transmission electron microscopy (TEM).

STUDIES ON THE BLEND OF POLYACRYLATE EMULSIONS AND TACKIFIER RESIN EMULSIONS

A series of polyacrylate emulsions were blended with tackifier resin emulsions such as modified rosin emulsion, C5 resin and C9 resin emulsion. The miscibility of the polyacrylates and tackifier resins was investigated by means of SEM and visual observation. The phase diagrams of the miscibility change systematically with the polarity of polyacrylates and tackifier resins. The influence of the content of the tackifier resins on the adhesion properties of the; polyacrylate emulsions were also studied. The results show that the 180 degrees C peel strength is improved as the amount of the tackifier resin increases and comes to a maximum at a specific content. The ball tack property decreases slightly and the hold strength changes complicatedly as the tackifier resin increases.

Concentration and Temperature Dependence of Electrical Conductivity in Thermally Stable Chromium Polyacrylate

Electrical conductivity of chromium polyacrylate with dopant concentration 30, 40 and 50 wt-% of chromium has been measured over a broad range of temperatures (303 K to 383 K).The electrical conductivity shows dependence on temperature, as well as, level of doping. The conductivity is considered to be due to thermal hopping motion of localized charge carriers,which are believed to be polarons, in the temperature range 303 K to 323 K and for T>343 K,whereas. it is metal-like in the temperature range 323 K to 343 K

Damping properties of silicone rubber/polyacrylate sequential interpenetrating networks

Silicone rubber/polyacrylate sequential interpenetrating polymer networks(IPNs) were prepared by silicone rubber sheet dipped into the solution composed of different acrylate monomers and benzoyl peroxides(BPOs) for different time at room temperature and then acrylate polymerized at 80℃for 2 h. The molecular structure and damping properties of sequential IPNs were studied by means of FT-IR and dynamic mechanical analysis(DMA), respectively. The FT-IR spectrum shows that polyacrylate distributes unevenly along the thickness direction of IPNs, i.e. the concentration of polyacrylate decreases from the midst to the surface of the IPNs. The DMA shows that cold crystallization of silicone in the temperature range from -47℃to -30℃is reduced and loss factor of IPNs is improved after interpenetrating with polyacrylate. This suggestes that IPNs can be used as damping materials.

Assessment of the Effectiveness of Potassium Polyacrylate on Crop Production

Water control is a major problem in crop production, particularly in fragile ecosystems such as the Sahel. Water is the most important factor in plant productivity. Many initiatives have been developed in this direction, including all methods of irrigation and water and soil conservation. The objective of this work is to assess the effectiveness of this amendment in crop production in the context of climate variability. The methodology is based on experimentation to statistically compare the natural biomass on a soil of silty-clay-sandy texture, divided into two blocks, one of which is amended with potassium polyacrylate and the other is not. This study showed that the wet and dry biomasses produced on soils with potassium polyacrylate are significantly higher than those produced on unamended soils at the 5% threshold. Based on these results, potassium polyacrylate may be a solution to recurrent dryness pockets. However, uncontrolled environmental testing is necessary to confirm these results.

X-ray Crystallinity Studies of Palladium Polyacrylate

Free radical polymerized palladium polyacrylate was characterized by X-ray diffraction. Various parameters including mean crystallite size, interchain separation and radius of gyration have been calculated and discussed with respect to the concentration of Pd in the polymeric salt. The results show that polymer is predominantly amorphous in nature.

Study on the Surface Modification of Hydrophobic Polyacrylate Intraocular Lens

In this study, the polyacrylate intraocularr lens is irradiated by argon ion which can produce free radicals. In order to obtain better hydrophilic and lower platelets adhesion, monomer vinyl pyrrolidone (NVP) is grafted onto the hydrophobic polyacrylate intraocular lens surface in a certain reaction conditions. Specific changes in intraocular lens are detected by static contact angle (CA), scanning electron microscope (SEM) and light transmittance. The results show that this surface modification can greatly improve its hydrophilic character and surface formation.

复合型水性丙烯酸树脂乳液的制备和性能

采用低玻璃化转变温度、高分子量的丙烯酸树脂乳液与高玻璃化转变温度、低分子量的丙烯酸树脂分散体混合的方式,制备了无交联剂水性丙烯酸树脂复合乳液,用于彩印包装纸与塑料薄膜的热复合。以丙烯酸、丙烯酸丁酯、苯乙烯、丙烯酸羟乙酯等为原料,采用种子乳液聚合法制备了相对分子质量(1.48~1.84)×10^(5)、玻璃化转变温度(T_(g))﹣20~﹣40℃的丙烯酸酯乳液。以丙烯酸、丙烯酸丁酯、苯乙烯、α-甲基苯乙烯、马来酸单酯等为原料,采用本体聚合法制备了相对分子质量(1.34~1.65)×10^(4)、T_(g) 20~45℃、软化点80~105℃的固体树脂,进一步采用自乳化方法将固体树脂制备成树脂水分散体。考察了不同Tg的丙烯酸酯乳液与水分散体以不同比例混配后的乳液混合体的性能。研究结果表明,T_(g)为﹣27.6℃的丙烯酸酯乳液与Tg为28.2℃固体树脂的分散体以质量比8:2混合后,用于PET膜-黑色印刷纸的热复合,剥离强度达到5.6 N/25 mm,持粘性达270 h,可以充分满足覆膜材料的附着力和耐压纹等性能要求。