Hyperbranched polymer hollow-fiber-composite membranes for pervaporation separation of aromatic/aliphatic hydrocarbon mixtures

The separation of aromatic/aliphatic hydrocarbon mixtures is crucial in the petrochemical industry.Pervaporation is regarded as a promising approach for the separation of aromatic compounds from alkanes. Developing membrane materials with efficient separation performance is still the main task since the membrane should provide chemical stability, high permeation flux, and selectivity. In this study, the hyperbranched polymer(HBP) was deposited on the outer surface of a polyvinylidene fluoride(PVDF)hollow-fiber ultrafiltration membrane by a facile dip-coating method. The dip-coating rate, HBP concentration, and thermal cross-linking temperature were regulated to optimize the membrane structure.The obtained HBP/PVDF hollow-fiber-composite membrane had a good separation performance for aromatic/aliphatic hydrocarbon mixtures. For the 50%/50%(mass) toluene/n-heptane mixture, the permeation flux of optimized composite membranes could reach 1766 g·m^(-2)·h^(-1), with a separation factor of 4.1 at 60℃. Therefore, the HBP/PVDF hollow-fiber-composite membrane has great application prospects in the pervaporation separation of aromatic/aliphatic hydrocarbon mixtures.

Synthesis of Hyperbranched Polymers and Its Effect on Water Vapor Permeability of Microfiber Synthetic Leather

A series of hyperbranched poly(amine-ester)polyols were synthesized by the polycondensation of N,N-diethylol-3-amine-methylpropionate(prepared by Michael addition reaction of methyl acrylate with diethanolamine)as an AB2-type monomer with trimethylol propane as the core moiety,proceeding in one-step procedure in the melt with p-toluenesulfonic acid as catalyst.The obtained monomer and polymers were characterized by FTIR and 1H-NMR spectroscopy.The solubility and surface activity in aqueous solution of the polymers were also examined.The gas permeability,water vapor permeability,and moisture absorption of microfiber synthetic leather treated by hyperbranched polymer were studied.The optimum conditions were that the dosage of dye and hyperbranched polymer was 5% and 10%,respectively.The water vapor permeability and moisture absorption of microfiber synthetic leather reached to 0.525 4 mg/(10 cm2·24 h)and 0.046 7 mg/(10 cm2·24 h).Compared with blank samples,they increased by 15% and 35%,respectively.However,the dosage of hyperbranched polymer has little influence on gas permeability of microfiber synthetic leather.SEM results show that the fiber of microfiber synthetic leather treated by hyperbranched polymer is incompact.

Influence of Reactive Diluent on UV-curing of AcrylateTerminated Hyperbranched Polymers

A Aeries of hydroxylic hyperbranched polymers were derived from 2,2-bis(methylol) propionic acid and tris(methylol) propane reacted with acrylic acid to various extents. The obtained acrylated hyperbranched polymers alone or with a monofunctional diluent, isobornylene acrylate(IBOA) were further cured by UV radiation. The cured films based on the modified polymers alone all demonstrated poor mechanical properties due to their high network densities and low moving ability of polymer chains. For the composite systems, the cured films demonstrated improved mechanical properties due to the low network densities and high chain moving ability. With more IBOA included in the systems, acrylate groups can react to a higher extent during the curing process.

STUDY ON UV CURABLE POWDER COATINGS BASED ON HYPERBRANCHED POLYMERS

By introducing semicrystalline moieties into hyperbranched molecular smictures three kinds of prepolymers of potential use as UV powder coatings were prepared and characterized.

Tracing drug release process with dual-modal hyperbranched polymer-gold nanoparticle complexes

Dual-modal surface enhanced Raman spectrum(SERS)-fluorescence polymer/metal hybrid complexes have been prepared for tracing drug release process in tumor cells. Firstly, the hyperbranched poly((S-(4-vinyl) benzyl S′-propyltrithiocarbonate)-co-(poly(ethylene glycol) methacrylate))(HPVBEG) was synthesized via the combination of reversible addition-fragmentation chain-transfer(RAFT) polymerization and self-condensing vinyl polymerization(SCVP). Subsequently, the anticancer drug doxorubicin(DOX) was linked to HPVBEG via pH sensitive Schiff base bonds to form HPVBEG-g-DOX conjugates.Through aminolysis reaction, HPVBEG-g-DOX was coordinated with gold nanoparticles(GNP), resulting in the formation of HPVBEG-g-DOX/GNP complexes. In neutral condition, the HPVBEG-g-DOX/GNP complexes were stable, and DOX was bound to the surface of GNPs. Therefore, the SERS of DOX could be observed, while the fluorescence of DOX was quenched by GNPs. Under an acidic environment, DOX was released from the surface of GNPs with breakage of Schiff base bonds.Thus, the SERS signal of DOX was gradually reduced. Correspondingly, the fluorescence signal of DOX was enhanced.Through dual-modal SERS-fluorescence technique, the DOX delivery and release process was traced in tumor cells. Moreover,the viability of MCF-7 cells incubated with HPVBEG-g-DOX/GNP complexes was investigated by Cell Counting Kit-8(CCK-8) assay. The experimental results showed that HPVBEG-g-DOX/GNP complexes had similar proliferation inhibition effect compared with free DOX. Definitely, the dual-modal SERS-fluorescence complexes for tracing drug delivery and release will have promising prospects on tumor diagnosis and therapy.

HYPERBRANCHED AROMATIC POLYMERS OBTAINED VIA SELF-CONDENSATION

Hyperbranched aromatic polymers were prepared by Friedel-Crafts reaction with Lewis acid, AlCl3 and ZnCl2, as the catalysts. In this work, hyperbranched polybenzyl (PB) and poly(methylene)naphthalene (PN) were synthesized and characterized by H-1-NMR and GPC. In addition, their florescence properties were measured with steady-state florescence spectra in THF and ethylene dichloride. The quantum yields of polybenzyl and poly(methylene)naphthalene in ethylene dichloride are much larger than those in THE.

Cinnamate-functionalized hyperbranched polymer as liquid crystal photo-alignment layer

In this work, 4-methoxylcinnamoyl chloride was reacted with a commercial hyperbranched polymer （Boltom-TM H30） to prepare a hyperbranched photosensitive polymer （H30-Ci）. The polymer was characterized by UV absorption spectrum and 1H- NMR spectrum. After processed by Linearly Polarized Polymerization （LPP） method, the spin-coated films of H30-Ci were used as photo-alignment layers to assemble liquid crystal （LC） cells containing nematic liquid crystal （5CB）. The observation by polarized microscope showed that the H30-Ci blended with a linear polymer （BP-AN-Ci） photo-alignment layers could align LC molecules in a very uniform way.

Two-Photon Fluorescence Properties and Ultrafast Responses of a Hyperbranched Diketo-Pyrrolo-Pyrrole Polymer with Triphenylamine as the Core

The two-photon fluorescence properties and ultrafast responses of a hyperbranched polyyne （hb-DPP-J2） with triphenylamine as the central core, Diketo-Pyrrolo-Pyrrole as the connecting unit and electron acceptor are studied. The polymer has a D-π-A-π-D conjugated structure along the extended polyyne w-bridge systems, and the effective condugated unit repeats itself in the whole hyperbranehed polymer chain. The polymer exhibits a large two-photon absorption cross section and high fluorescence quantum yields. The ultrafast dynamic results give a deep understanding of the excited energy transfer processes under excitation, and reveal a long relaxation lifetime of the intramolecular charge transfer （ICT） state.

HYPERBRANCHED CONJUGATIVE MACROMOLECULES CONSTRUCTED FROM TRIPLE-BOND BUILDING BLOCKS

Polycyclotrimerization and polycoupling of acetylenic monomers respectively furnish hyperbranched polyarylenes and polyynes with high molecular weights （up to 1 × 10^6） in high yields （up to 99.9%）. The polymers possess low intrinsic viscosities and high thermal stabilities, losing little of their weights when heated to 〉 400℃. Upon pyrolysis at 〉 800℃, the polymers graphitize with high char yields （up to 86%）. Hyperbranched polyarylenes efficiently emit deep-blue to blue-green lights with fluorescence quantum yields up to 98% and strongly attenuate intense laser pulses with optical power-limiting performances superior to that of C60, a well-known optical limiter. Poly（alkenephenylenes）, poly（aroylarylenes） and polyynes are readily cross-linkable by UV irradiation, serving as excellent photoresist materials for the generation of patterns with nanometer resolution. Thin films of hyperbranched polyynes exhibit very high refractive indexes （n up to 1.86）. The internal and terminal acetylene moieties of the polyynes readily form complexes with cobalt carbonyls, which can be transformed into soft ferromagnetic ceramics with high magnetic susceptibilities （Ms up to ca. 118 emu/g） and near-zero magnetic losses.

Novel hyperbranched polyimides from 2,6,12-triaminotriptycene

The monomer 2,6,12-triaminotriptycene was synthesized and the structure was confirmed by IR and 1H NMR spectra. Hyperbranched polyimides modified with different terminal groups were obtained from precursors, anhydride- and aminoterminated hyperbranched poly（amic acid）s from polymerization of A2 ＋ B3 system. From gel permeation chromatograrn （GPC） characterization, representative products had high molecular weight. All polymers had good solubility in CHCl3, DMF and tetrahydrofuran （THF）, and performed no detective Tgs in the range of 50-300 ℃ and high Tds above 455 ℃ when 5% weight loss.

Novel hot-melting hyperbranched poly(ester-amine) bearing self-complementary quadruple hydrogen bonding units

Hyperbranched poly（amine-ester）s bearing self-complementary quadruple hydrogen bonding units display excellent mechanical and temperature-dependent melt rheological properties, which make them suitable as novel hot-melting materials.

Surface interaction between Pd and nitrogen derived from hyperbranched polyamide towards highly effective formic acid dehydrogenation

Hydrogen production from formic acid decomposition(FAD)is a promising means of hydrogen energy storage and utilization in fuel cells.Development of efficient catalysts for dehydrogenation of formic acid is a challenging topic.The surface chemical and electronic structure of the active catalysis components is important in formic acid decomposition at room-temperature.Here,the pyrdinic-nitrogen doped catalysts from hyperbranched polyamide were prepared via in situ polymerization reaction process by using activated carbon as a support.Because of the introduction of the polymer,the particles of the catalysts were stabilized,and the average particle diameter was only 1.64 nm.Under mild conditions,the catalysts activities were evaluated for FAD.The optimized Pd-N30/C catalyst exhibited high performance achieving almost full conversion,with a turnover frequency of 3481 h^-1 at 30℃.

SYNTHESIS OF AN EPOXY-TERMINATED HYPERBRANCHED AROMATIC POLYESTER

An epoxy-terminated hyperbranched aromatic polyester (P3) was synthesized from a hyperbranched aromatic polyester containing carboxylic acid end groups (P1), which was derived from the condensation polymerization of the AB(2) monomer, 5-acetoxyisophthalic acid. Polymer P1 was converted into the polymeric acid chloride by reaction with thionyl chloride. The acid chloride was reacted with ethanol and glycidol to form a poly(ethyl ester) (P2) and an epoxy terminated material (P3), respectively. The reaction conditions in each step of these processes had to be controlled very carefully to avoid unwanted cross-linking reactions. The characterization of products and intermediates, including molecular weight distributions and thermal properties, are reported.

SYNTHESIS OF HYPERBRANCHED CONJUGATIVE POLY(ARYLENEETHYNYLENE)S BY ALKYNE POLYCYCLOTRIMERIZATION

A series of new hyperbranched poly(aryleneethynylene)s are synthesized by the copolycyclotrimerizations oftetraynes(Ⅰand Ⅱ)with aliphatic monoynes(A-C)catalyzed by tantalum-,niobium-,and cobalt-based catalysts.All thereactions proceed smoothly and soluble polymers of high molecular weights(M_w up to 3.8×10~4)are obtained in high yields(up to 97%).

A functional hyperbranched binder enabling ultra-stable sulfur cathode for high-performance lithium-sulfur battery

Binders are of vital importance in stabilizing the cathodes to enhance the cycling stability of lithiumsulfur(Li-S) batteries. However, conventional binders are typically confronted with the drawback of inability for adsorbing lithium polysulfide(Li PS), thus resulting in severe active material losing and rapid capacity fading. Herein, a novel water-soluble hyperbranched poly(amidoamine)(HPAA) binder with controllable hyperbranched molecular structure and abundant amino end groups for Li-S battery is designed and fabricated, which can improve efficient adsorption for Li PS and stability of the sulfur cathodes. Besides, the strong intermolecular hydrogen bonds in HPAA binder can contribute to the structural stability of S cathode and integration of the conductive paths. Therefore, the Li-S battery with this functional binder exhibits excellent cycle performance with a capacity retention of 91% after 200 cycles at 0.1 C.Even at a high sulfur loading of 5.3 mg cm-2, a specific capacity of 601 mA h g-1 can also be achieved.Density functional theory(DFT) calculation further demonstrates that the enhanced electrochemical stability derives from the high binding energy between amino groups and LiP S and the wide electrochemical window(6.87 e V) of HPAA molecule. Based on the above all, this functional polymer will lighten a new species of binders for eco-friendly sulfur cathodes and significantly promote the practical applications of high-performance Li-S batteries.

SYNTHESIS AND CHARACTERIZATION OF HYPERBRANCHED POLY(ESTER-AMIDE)S BASED ON GALLIC ACID AND DL-2-AMINOBUTYRIC ACID

A novel AB3-type monomer was prepared from gallic acid and DL-2-aminobutyric acid, and used for the synthesis of the biocompatible hyperbranched poly(ester-amide)s by self-polycondensation. The polymers were characterized via FTIR and NMR spectroscopy and thermal analysis, and the average degree of branching of the polymers was estimated to be 0.75. The polymers with abundant acetyl end groups were found to be amorphous with lower intrinsic viscosity, better thermal stability and excellent solubility.

SYNTHESES AND CHARACTERIZATIONS OF HYPERBRANCHED POLYPHENYLENES

New hyperbranched polyphenylenes with high molecular weights are synthesized by the copolycyclotrimerizations of 1,4-diethynylbenzene (I) with phenylacetylene (A), 1-octyne (B), and 1-dodecyne (C) catalyzed by TaCl5-Ph4Sn. The polymers are completely soluble in common solvents such as toluene, THF, chloroform, and dichloromethane. The polymers are characterized by spectroscopic methods and all of the polymers give satisfactory analysis data corresponding to their expected molecular structures.

POLYCYCLOTRIMERIZATION OF DIYNES,A NEW APPROACH TO HYPERBRANCHED POLYPHENYLENES

Polycyclotrimerization of diynes was explored as a new route to hyperbranched polymers in this investigation. Polymerization of terminal diynes of 1,8-nonadiyne and 1,9-decadiyne was studied using TaCl5, NbCl5, Mo(CO)(4)(nbd) and [Mo(CO)(3)cp](2) as catalysts (where nbd = 2,5-norbornadiene, cp = cyclopentadiene). A soluble polymer was obtained when the polymerization of 1,9-decadiyne was initiated by TaCl5 at low temperature (0 degrees C). The polymer, however, became partially soluble after purification, possibly due to the postpolymerization-induced crosslinking. NbCl5-catalyzed polymerization of 1,9-bis(trimethylsilyl)- 1,8-nonadiyne gave a completely soluble polymer. Soluble polymers were also obtained from the polymerization of 3,9-dodecadiyne initiated by NbCl5, Mo(CO)(4)(nbd), [Mo(CO)(3)cp](2), PdCl2-ClSiMe3 and Pd/C-ClSiMe3. IR, UV, and NMR spectroscopic analysis revealed that different catalysts gave polymers with different structures, ranging from linear polyenes to hyperbranched polyphenylenes. The polymers absorb UV light at around 250 nm and emit fluorescence at 340 nm when they are excited at 248 nm.

SYNTHESIS AND PHOTOLUMINESCENCE OF AN ANTHRACENE-CONTAINING HYPERBRANCHED POLY(ARYLENEETHYNYLENE)

A hyperbranched poly（aryleneethynylene） containing anthracene chromophore was synthesized by palladiumcatalyzed cross-coupling reaction of 2,4,6-triiodophenyl 9-anthracenylcarboxylate with 9,9-bis[4-（2-propynyloxy）phenyl]- 9H-fluorene. The structure and properties of the polymer are characterized and evaluated by NMR, IR, UV, PL and TGA analyses. The polymer is soluble in common organic solvents, possesses high thermal stability （Td 〉 330℃）, and emits a strong blue light of 465 nm in both solution and solid states.

Synthesis of core-shell structured polymers with inserted thioether from a multi-functional scaffold

The synthesis of a thioether inserted, core-shell structured polymer from the scaffold of hyperbranched polyglycerol (PG) was described. PG was first allyl functionalized, and in the presence of AlBN, the allyl groups further underwent radical addition to thiol compounds, thus thiol functional polyethylene oxide monomether (MPEO) were grafted onto PG. Similarly, 2-mercaptoethylammonium chloride was introduced onto PG via thiol addition, and the residual amino groups were further quaternized with decyl bromide, leading to an amphiphilic core-shell structure polymer. (c) 2007 De Cheng Wan. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.