Modal identification based on Hilbert-Huang Transform of structural response with S VD preprocessing

In recent years, Empirical mode decomposition and Hilbert spectral analysis have been combined to identify system parameters. Singular-Value Decomposition is pro- posed as a signal preprocessing technique of Hilbert-Huang Transform to extract modal parameters for closely spaced modes and low-energy components. The proposed method is applied to a simulated airplane model built in Automatic Dynamic Analysis of Mechanical Systems software. The results demonstrate that the identified modal parameters are in good agreement with the baseline model.

An input signal used in process identification - chaos sequence

The sequences which consist of any segment of a chaos sequence are called asC-sequences. These sequences could be used as a kind of input signals to replace M-sequences in theprocess identification. This substitution is theoretically proved to be feasible. InverseC-sequences are created in a way similar to inverse M-sequences to solve the problem thatC-sequences have non-ideal balance property, that is, the numbers of '0' and '1' are unequal.Besides its good pseudo-random property, the sequences have other advantages such as easy togenerate, varieties of the segment and adjustable cycle time.

Operational Modal Analysis of a Ship Model in the Presence of Harmonic Excitation

A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic responses. In order to reduce structural vibration, it is important to obtain the modal parameters information of a ship. However, the traditional modal parameter identification methods are not suitable since the excitation information is difficult to obtain. Natural excitation technique-eigensystem realization algorithm （NExT-ERA） is an operational modal identification method which abstracts modal parameters only from the response signals, and it is based on the assumption that the input to the structure is pure white noise. Hence, it is necessary to study the influence of harmonic excitations while applying the NExT-ERA method to a ship structure. The results of this research paper indicate the practical experiences under ambient excitation, ship model experiments were successfully done in the modal parameters identification only when the harmonic frequencies were not too close to the modal frequencies.

Process Management in Insurance Companies

The importance of insurance activity is constantly growing, generating new problems and setting new challenges. One of these challenges is to meet the growing requirements and expectations of customers. This requires the efficient management of insurance companies. This means the necessity of applying modern management concepts, first and foremost, the concept of process management and instruments related to this process. This article describes the results of research on process management in insurance companies operating in Poland that was conducted by the Faculty of Management at the Warsaw University of Technology and presents the concept of the identification of processes carried out in insurance companies encompassing management, basic and auxiliary processes, as well as the objectives of the processes and the relationships between the basic processes and other processes carried out in insurance companies.

Millimeter observations of organic molecules toward high-mass star formation region G34.26+0.15

To investigate the chemical origination of organic molecules CH3OH, CH3OCH3, C2H5OH, CH3OCH, CH3CN, C2HaCN and C2H5CN in the hot core associated with high-mass star formation re- gion G34.26＋0.15, Submillimeter Array observations were made with its 230 GHz receiver. The molecular gas distribution has shown that the oxygen- and nitrogen-containing molecules peak at different positions. Comparing the spatial distributions with rotational temperatures and fractional abundances of the observed molecules, we discuss the possible chemical origination of these organic molecules.

Algorithm of automatic generation of technology process and process relations of automotive wiring harnesses

Identifying each process and their constraint relations from the complex wiring harness drawings quickly and accurately is the basis for formulating process routes. According to the knowledge of automotive wiring harness and the characteristics of wiring harness components, we established the model of wiring harness graph. Then we research the algorithm of identifying technology processes automatically, finally we describe the relationships between processes by introducing the constraint matrix, which is in or- der to lay a good foundation for harness process planning and production scheduling.

Evaluation of diagnostic ratios of medium and serious weathered oils from five different oil sources

Laboratory experiments were conducted to simulate oil weathering process, a medium to long term weathering process for 210-d, using samples collected from five different oil resources. Based on relative deviation and repeatability limit analysis about indexes of these samples, the results show there had been significant changes in diagnostic ratios among the initial and weathered samples of different oils during this process. Changes of selected n-alkane diagnostic ratios of all oil samples displayed more obviously than diagnostic ratios of terpanes,steranes and PAHs in this process. Almost all selected diagnostic ratios of terpanes, steranes and PAHs can be efficiently used in tracking sources of hydrocarbon pollution, differentiating from the n-alkane diagnostic ratios.In these efficient diagnostic ratios, only four ratios maintained good stability in the weathering processes and are more suitable because their relative deviation（RSD） are lower than 5%.

Multi-function radar emitter identification based on stochastic syntax-directed translation schema

To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed translation schema（SSDTS）. This method, which is deduced from the syntactic modeling of multi-function radars, considers the probabilities of radar phrases appearance in different radar modes as well as the probabilities of radar word errors occurrence in different radar phrases. It concludes that the proposed method can not only correct the defective radar words by using the stochastic translation schema, but also identify the real radar phrases and working modes of measured emitters concurrently. Furthermore, a number of simulations are presented to demonstrate the identification capability and adaptability of the SSDTS algorithm.The results show that even under the condition of the defective radar words distorted by noise,the proposed algorithm can infer the phrases, work modes and types of measured emitters correctly.

Dynamic model identification of a real-time simple level control system

Using a relay feedback approach,mathematical expressions for identification of real-time level control system in transfer function form are proposed in this paper.An ideal relay with hysteresis is feedback to a simple level control system for the generation of sustained oscillations.Subsequently,limit cycle information is utilised in deduced expressions for the estimation of unknown system parameters.Using describing function analysis,the gain of an ideal relay with hysteresis is approximated to yield simple mathematical expressions.Typical examples from literature are considered to show the effectiveness of the proposed identification scheme.Yokogawa distributed control system:CENTUM CS 3000 is considered as a platform for the realisation of both relay feedback and Ziegler-Nichols(ZN)method.The accuracy of derived transfer function models is compared with a model derived from ZN method and thereafter demonstrated through frequency response plots which illustrate the experimental validation of the identified real-time process model.

Landmarks in the application of electrical tomography in particle science and technology

Selected milestones in the development and use of electrical tomography in powder conveying, slurry processing and multi-phase flow are highlighted. The ability to map concentration in opaque mixtures under process-realistic conditions was a major innovation for the method and has had far reaching implications. Subsequent developments have enabled velocity information to be abstracted resulting in the ability to measure component flux and motion.