Stochastic seismic inversion and Bayesian facies classification applied to porosity modeling and igneous rock identification

We apply stochastic seismic inversion and Bayesian facies classification for porosity modeling and igneous rock identification in the presalt interval of the Santos Basin. This integration of seismic and well-derived information enhances reservoir characterization. Stochastic inversion and Bayesian classification are powerful tools because they permit addressing the uncertainties in the model. We used the ES-MDA algorithm to achieve the realizations equivalent to the percentiles P10, P50, and P90 of acoustic impedance, a novel method for acoustic inversion in presalt. The facies were divided into five: reservoir 1,reservoir 2, tight carbonates, clayey rocks, and igneous rocks. To deal with the overlaps in acoustic impedance values of facies, we included geological information using a priori probability, indicating that structural highs are reservoir-dominated. To illustrate our approach, we conducted porosity modeling using facies-related rock-physics models for rock-physics inversion in an area with a well drilled in a coquina bank and evaluated the thickness and extension of an igneous intrusion near the carbonate-salt interface. The modeled porosity and the classified seismic facies are in good agreement with the ones observed in the wells. Notably, the coquinas bank presents an improvement in the porosity towards the top. The a priori probability model was crucial for limiting the clayey rocks to the structural lows. In Well B, the hit rate of the igneous rock in the three scenarios is higher than 60%, showing an excellent thickness-prediction capability.

Multi-scale data joint inversion of minerals and porosity in altered igneous reservoirs—A case study in the South China Sea

There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.

Plume-lithosphere interaction in the Comei Large Igneous Province: Evidence from two types of mafic dykes in Gyangze, south Tibet, China

Two suites of mafic dykes,T1193-A and T1194-A,outcrop in Gyangze area,southeast Tibet.They are in the area of Comei LIP and have indistinguishable field occurrences with two other dykes in Gyangze,T0902 dyke with 137.7±1.3 Ma zircon age and T0907 dyke with 142±1.4 Ma zircon age reported by Wang YY et al.(2016),indicating coeval formation time.Taking all the four diabase dykes into consideration,two different types,OIB-type and weak enriched-type,can be summarized.The“OIB-type”samples,including T1193-A and T0907 dykes,show OIB-like geochemical features and have initial Sr-Nd isotopic values similar with most mafic products in Comei Large Igneous Provinces(LIP),suggesting that they represent melts directly generated from the Kerguelen mantle plume.The“weak enriched-type”samples,including T1194-A and T0902 dykes,have REEs and trace element patterns showing withinplate affinity but have obvious Nb-Ta-Ti negative anomalies.They show uniform lowerεNd(t)values(−6‒−2)and higher 87Sr/86Sr(t)values(0.706‒0.709)independent of their MgO variation,indicating one enriched mantle source.Considering their closely spatial and temporal relationship with the widespread Comei LIP magmatic products in Tethyan Himalaya,these“weak enriched-type”samples are consistent with mixing of melts from mantle plume and the above ancient Tethyan Himalaya subcontinental lithospheric mantle(SCLM)in different proportions.These weak enriched mafic rocks in Comei LIP form one special rock group and most likely suggest large scale hot mantle plume-continental lithosphere interaction.This process may lead to strong modification of the Tethyan Himalaya lithosphere in the Early Cretaceous.

Assessment of Radiological Hazards of Sedimentary, Igneous and Sediments Natural Rocks

Gamma-ray spectroscopy based on a 100% efficiency hyper-pure germanium detector was used to evaluate the activity concentrations of 226Ra, 232Th, and 40K natural radionuclides in sedimentary, conglomerate, igneous and sedi-ments rock samples collected from four different locations in Eastern desert in Egypt. The obtained activity concentrations are used to evaluate the radi-ological hazards indices, absorbed dose rate, annual effective dose equivalent in air, radium equivalent, external and internal hazard index, radiation level index, annual gonadal dose equivalent, excess lifetime cancer risk and expo-sure rate. The results show that 1) the absorbed dose rate depends on the rock type, 2) the annual effective dose equivalent in air in 71% of sample below 20 mSvy-1 (permissible limit for workers), 3) the conglomerate rocks show low radioactivity level, 4) sedimentary rocks are rich in radium while igneous rocks are rich in thorium and the sediments rocks are rich in both radium and thorium.

Formation of the primary petroleum reservoir in Wumaying inner buried-hill of Huanghua Depression, Bohai Bay Basin, China

Well Yinggu 1 drilled on the tectonic belt of the Wumaying buried-hill in Huanghua Depression obtained non-H2S high-yield oil and gas flow from the Permian Lower Shihezi Formation sandstone. The oil and gas are derived from the Upper Paleozoic coal source rock, the petroleum reservoir is an inner buried-hill primary oil and gas accumulation, showing a good prospect of the Paleozoic inner buried-hill primary reservoir exploration. The formation and accumulation of the primary petroleum reservoir in the Wumaying inner buried-hill are discussed by studying the primary source conditions, the inner buried-hill reservoir-cap combinations and the hydrocarbon accumulation period. The primary petroleum reservoir has three preponderant characteristics of accumulation: secondary large-scale gas generation of coal source rock, multi reservoir-cap combinations and mainly late hydrocarbon charging, which formed the compound hydrocarbon accumulation of the above-source sandstone and under-source carbonate rock in the Paleozoic inner buried-hill. Along with the Mesozoic and Cenozoic tectonic activities, the formation of the primary reservoir in Wumaying inner buried-hill is characterized by "mixed oil and gas charge in local parts in early stage, adjustment accumulation due to structural high migration in middle stage, and large-scale natural gas charge and compound accumulation in late stage".

Petrogenesis of Oligocene volcanic rocks of the Lake Tana area,Ethiopian large Igneous Province

The Lake Tana area is located within a complex volcano-tectonic basin on the northwestern Ethiopian plateau.The basin is underlain by a thick succession of Oligocene transitional basalts and sub-alkaline rhyolites overlain in places,particularly south of the lake,by Quaternary alkaline to mildly transitional basalts,and dotted with Oligo-Miocene trachyte domes and plugs.This paper presents the results of integrated field,petrographic,and major and trace element geochemical studies of the Lake Tana area volcanic rocks,with particular emphasis on the Oligocene basalts and rhyolites.The studies reveal a clear petrogenetic link between the Oligocene basalts and rhyolites.The Oligocene basalts are:(1)plagioclase,olivine,and/or pyroxene phyric;(2)show an overall decreasing trend in MgO,Fe_(2)O_(3),and CaO with silica;(3)have relatively low Mg#,Ni and Cr contents and high Nb/La and Nb/Yb ratios;and(4)show LREE enriched and generally flat HREE patterns.All these imply the origin of the Oligocene basalts by shallow-level fractional crystallization of an enriched magma sourced at the asthenospheric mantle.The Oligocene rhyolites:(1)are enriched in incompatible while depleted in compatible trace elements,P and Ti;(2)show a strong negative Eu anomaly;(3)contain appreciable amounts of plagioclase,apatite,and Fe-Ti oxides;and(4)show clear geochemical similarity with well-constrained rhyolites from the Large Igneous Province(LIP)of the northwestern Ethiopian plateau.Low-pressure fractional crystallization of mantle-derived basaltic magma in crustal magma chambers explains the origin of these rhyolites.Our study further shows that the Oligocene basalts and rhyolites are co-genetic and the felsic rocks of the Lake Tana area are related differentiates of the flood basalt volcanism in the northwestern Ethiopian plateau.

Textural and compositional zoning in plagioclase phenocrysts:implications for magma chamber processes in the Emeishan large Igneous Province,SW China

Textural and compositional zoning within plagioclase phenocrysts records the magma chamber processes,such as magma differentiation,magma recharge and mixing,and crustal contamination.The plagioclase phenocrysts in the Daqiao and Qiaojia plagioclase-phyric basalts from the Emeishan Large Igneous Province(LIP)show complex textural and compositional zoning patterns,e.g.,normal,reverse,oscillatory,and patchy zoning patterns.Most plagioclase phenocrysts exhibit a core–rim normal zoning pattern(Pl-A)with euhedral high-An cores(An=76–78%,in mole fraction)and low-An rims(An=68–72%),indicative of the crystal regrowth processes caused by recharge of relatively evolved magmas after the formation of high-An cores.Some phenocrysts have a core–rim reverse zoning pattern(Pl-B)with irregular ovaloid cores,characterized by extremely low An(60–61 mol%)and Ba(84–88 ppm)contents and extremely high87Sr/86Sr ratios(0.7120–0.7130).The rims of the Pl-B have relatively high An(69–72%),Ba(~160 ppm)contents,and low87Sr/86Sri(~0.7056).These Pl-B plagioclase phenocrysts preserve the information about the interaction between the crustal xenocrysts and the transporting magmas.Some plagioclase phenocrysts show a core–mantle–rim oscillatory zoning pattern(Pl-C)with multiple oscillations of An(70–80%),Ba(88–147ppm)from core to rim,revealing replenishment and mixing of multiple batches of basaltic melts with diverse compositions.87Sr/86Sr ratios of the Pl-C do not vary significantly(0.7050–0.7054).A small portion of phenocrysts has patchy patterns in the cores(Pl-D),where the low-An patches(72–75%)in form of elliptical or irregular elongated shapes were enclosed by the high-An domains(80–87%).These features can be attributed to crystal dissolution and regrowth processes during the reaction between earlyformed low-Cumulates and recharged hot primitive melts.The cores,mantles,and rims of different types of plagioclase phenocrysts(except the core of Pl-B)commonly display nearly constant Sr isotopic compositions,implying insignificant wall-rock assimilation at shallow-level magma reservoir(s)during the growth of these plagioclase phenocrysts.In conclusion,the massive crystallization of plagioclase in the late stage was an important controlling factor for the formation of iron-rich basalts in the Emeishan LIP.

Development Model and Quantitative Prediction of Igneous Rock in S Oilfield, the Bohai Sea Area

The structure of S Oilfield of Bohai sea area in China is located in the low uplift slope zone of the Dongwa Laibei area in the Huanghekou depression. The target interval of the oilfield belongs to the Paleogene layered structural oil reservoir under the influence of igneous rocks. Due to the widespread development of igneous rocks, and the diversity of igneous rock types, the structure is complex, and the lateral changes are intense. The differences in volcanic eruption intensity and volcanic materials made the igneous rock masses overlap each other, with rapid changes in lithofacies, and complex seismic reflection structures. Therefore, it was difficult to carry out fine characterization of igneous rocks. Based on the lithofacies model, lithofacies combination types, and seismic response characteristics of volcanic mechanisms, this paper summarized three types of development models of volcanic mechanisms in the study area. At the same time, through technical means such as stratigraphic slicing, seismic attribute extraction, and attribute optimization analysis, the spatial distribution characteristics of various facies zones of igneous rocks at different stages were described in detail, achieving precise prediction of igneous rocks in Bozhong S Oilfield. During the development process of the oilfield, the technical research results guided the optimization of well locations and provided technical support for the efficient development of the oilfield.

Gravity and magnetic anomalies field characteristics in the South China Sea and its application for interpretation of igneous rocks

Igneous rocks in the South China Sea have broad prospects for oil and gas exploration.Integrated geophysical methods are important approaches to study the distribution of igneous rocks and to determine and identify igneous rock bodies.Aimed at the characteristics of gravity and magnetic fields in the South China Sea,several potential field processing methods are preferentially selected.Reduction to the pole by variable inclinations in the area of low magnetic latitudes is used to perform reduction processing on magnetic anomalies.The preferential continuation method is used to separate gravity and magnetic anomalies and extract the gravity and magnetic anomaly information of igneous rocks in the shallow part of the South China Sea.The 3D spatial equivalent distribution of igneous rocks in South China Sea is illustrated by the 3 D correlation imaging of magnetic anomalies.Since the local anomaly boundaries are highlighted gravity and magnetic gradients,the distribution characters of different igneous rocks are roughly outlined by gravity and magnetic correlation analysis weighted by gradient.The results show the distribution of igneous rocks is controlled and influenced by deep crustal structure and faulting.

Experimental Investigation on Condensate Revaporization During Gas Injection Development in Fractured Gas Condensate Reservoirs

The gas field in the Bohai Bay Basin is a fractured metamorphic buried-hill reservoir with dual-media characteristics. The retrograde vaporization mechanism observed in this type of gas condensate reservoir differs significantly from that observed in sand gas condensate reservoirs. However, studies on improving the recovery of fractured gas condensate reservoirs are limited;thus, the impact of retrograde vaporization on condensate within fractured metamorphic buried-hill reservoirs remains unclear. To address this gap, a series of gas injection experiments are conducted in pressure-volume-temperature(PVT) cells and long-cores to investigate the retrograde vaporization effect of condensate using different gas injection media in fractured gas condensate reservoirs. We analyze the variation in condensate volume, gas-to-oil ratio, and condensate recovery during gas injection and examine the influence of various gas injection media(CO_(2), N_(2), and dry gas) under different reservoir properties and varying gas injection times. The results demonstrate that the exchange of components between injected gas and condensate significantly influences condensate retrograde vaporization in the formation. Compared with dry gas injection and N_(2) injection,CO_(2) injection exhibits a superior retrograde vaporization effect. At a CO_(2) injection volume of 1 PV, the percentage shrinkage volume of condensate is 13.82%. Additionally, at the maximum retrograde condensation pressure, CO_(2) injection can increase the recovery of condensate by 22.4%. However, the condensate recovery is notably lower in fractured gas condensate reservoirs than in homogeneous reservoirs, owing to the creation of dominant gas channeling by fractures, which leads to decreased condensate recovery. Regarding gas injection timing, the effect of gas injection at reservoir pressure on improving condensate recovery is superior to that of gas injection at the maximum retrograde condensation pressure. This research provides valuable guidance for designing gas injection development plans and dynamic tracking adjustments for fractured gas condensate reservoirs.

Characteristics of Meso-Cenozoic Igneous Complexes in the South Yellow Sea Basin,Lower Yangtze Craton of Eastern China and the Tectonic Setting

The South Yellow Sea Basin is partially surrounded by the East Asian continental Meso- Cenozoic widespread igneous rocks belt. Magnetic anomaly and multi-channel seismic data both reveal the prevalent occurrence of igneous rocks. We preliminarily defined the coupling relation between magnetic anomalies and igneous rock bodies. Some igneous complexes were also recognized by using multi-channel seismic and drilling data. We identified various intrusive and extrusive igneous rock bodies, such as stocks, sills, dikes, laccoliths and volcanic edifice relics through seismic facies analysis. We also forecasted the distribution characteristics of igneous complexes. More than fifty hypabyssal intrusions and volcanic relics were delineated based on the interpretation of magnetic anomaly and dense intersecting multi-channel seismic data. It is an important supplement to regional geology and basin evolution research. Spatial matching relations between igneous rock belts and fractures document that extensional N-E and N-NE-trending deep fractures may be effective pathways for magma intrusion. These fractures formed under the influence of regional extension during the Meso- Cenozoic after the Indosinian movement. Isotopic ages and crosscutting relations between igneous rock bodies and the surrounding bedded sedimentary strata both indicate that igneous activities might have initiated during the Late Jurassic, peaked in the Early Cretaceous, gradually weakened in the Late Cretaceous, and continued until the Miocene. Combined with previous studies, it is considered that the Meso-Cenozoic igneous activities, especially the intensive igneous activity of the Early Cretaceous, are closely associated with the subduction of the Paleo-Pacific Plate.

Geochemistry of Alkali-rich Igneous Rocks of Northern Xinjiang and Its Implications for Geodynamics

Five nearly E-W-trending alkali-rich igneous rock belts are distributed from north to south in northern Xinjiang, and they are composed mainly of riebeckite, K-feldspar granite and high-K and medium-K calc-alkaline volcanic rocks and shoshonite. They were mainly emplaced or erupted between the Carboniferous and Permian. The compositions of Sr, Nd, Pb, and O isotopes imply that their principal resource materials are derived from the upper mantle or juvenile crust, indicating obvious continental growth in the Phanerozoic. The trace element association implies that their tectonic settings are within plate and volcanic arc for alkali-rich granites, and post-collisional are, late oceanic are and continental are for alkali-rich volcanic rocks. An archipelago model was suggested for the tectonic evolution in northern Xinjiang. It can be named the central-Asia-type orogeny, which is different from the so called circum-Pacific ocean-continent-type tectonics or the Alpine-Himalayan continent-continent-collisional orogeny.

Chemostratigraphy of Flood Basalts in the Garze-Litang Region and Zongza Block: Implications for Western Extension of the Emeishan Large Igneous Province, SW China

The Late Permian Emeishan Large Igneous Province (ELIP) is commonly regarded as being located in the western part of the Yangtze craton, SW China, with an asymmetrical shape and a small area. This area, however, is just a maximum estimation because some parts of the ELIP were not recognized or dismembered and destroyed during the Triassic to Cenozoic tectonism. In this paper, the chemostratigraphical data of the Zongza block, the Garze-Litang belt and the Songpan-Garze block suggest that the Late Permian basalts in these areas have remarkable similarities to the ELIP basalts in petrography and geochemistry. Flood basalts in the Sanjiangkou area are composed of the lower part of the low-Ti (LT) tholeiite and the upper part of the high-Ti (HT) tholeiite, which is the same as the flood basalts on the western margin of the Yangtze craton. Flood basalts in the Zongza and Songpan-Garze areas, which are far from the Yangtze craton, consist of HT tholeiite only. This is the same as the flood basalts within the Yangtze craton. Therefore we argue that these contemporary basalts all originated from the Emeishan mantle plume, and the ELIP could have a significant westward extension with an outcropped area of over 500,000 km2. This new scenario shows that the LT tholeiite occurs on the western margin of the Yangtze craton, while the HT tholeiite overlying the LT basalts occupies the whole area of the ELIP.

Reflectivity forward modeling and a CSSI method seismic inversion study of igneous intrusive area,coked area,and gas-enriched area located within a coal seam

We applied the reflectivity method and the constrained sparse spike inverse modeling(CSSI) method to the interpretation of coal field lithologic seismic data.After introducing the principles of these two methods we discuss some parameters of a geological model involving possible gas enriched areas or intruded igneous rock.The geological model was constructed and a 60 Hz seismic response profile was obtained looking for igneous rock intrusion and coked areas of the coal seam using the reflectivity method.Starting from synthesized logging data from two wells and a synthesized seismic wavelet we calibrated the model to show accurate strata.Finally,we predicted the lithology within a 10 m igneous rock area,a 3 m coal seam area,and a coked area using the CSSI technique.The results show that the CSSI technique can identify hard to recognize lithologic features that normal profil-ing methods might miss.It can quantitatively analyze and evaluate the intrusive area,the coked area,and the gas-enriched area.

Geochemistry of Permian Mafic Igneous Rocks from the Napo-Qinzhou Tectonic Belt in Southwest Guangxi, Southwest China: Implications for Arc-Back Arc Basin Magmatic Evolution

The Napo-Qinzhou Tectonic Belt （NQTB） lies at the junction of the Yangtze, Cathaysia and Indochina （North Vietnam） Blocks, which is composed of five major lithotectonic subunits： the Qinzhou-Fangcheng Suture Zone （QFSZ）, the Shiwandashan Basin （SB）, the Pingxiang-Nanning Suture Zone （PNSZ）, the Damingshan Block （DB） and the Babu-Lingma Suture Zone （BLSZ）. On the basis of geochemical compositions, the Permian mafic igneous rocks can be divided into three distinct groups： （1） mafic igneous rocks （Group 1） from the Longjing region in the PNSZ and Hurun region in the BLSZ, which are characterized by intermediate Ti, P and Zr with low Ni and Cr contents; （2） mafic igneous rocks （Group 2） from the Naxiao and Chongzuo region in the DB, characterized by low-intermediate Ti, P and Zr with high Ni and Cr concentrations; and （3） mafic igneous rocks （Group 3） from the Siming region in the Jingxi carbonate platform of the northwestern margin of the NQTB, with intermediate-high Ti, P and Zr and low Ni and Cr contents. The Group 1 rocks yield a weighted mean 206 Pb/ 238 U age of 250.5±2.8 Ma and are geochemically similar to basalts occurring in back-arc basin settings. The Group 2 rocks exhibit geochemical features to those basalts in island arcs, whereas the Group 3 rocks show geochemical similarity to that of ocean island basalts. All three groups are characterized by relatively low ε Nd （t） values （-2.61 to ＋1.10） and high initial 87 Sr/ 86 Sr isotopic ratios （0.705309-0.707434）, indicating that they were derived from a subduction-modified lithospheric mantle and experienced assimilation, fractional crystallization, and crustal contamination or mixing during magmatic evolution. Accordingly, we propose the existence of an arc-back arc basin system that developed along the NQTB at the border of SW Guangxi Province （SW China） and northern Vietnam, and it was formed by continued northwestward subduction of the Cathaysian （or Yunkai） Block under the Yangtze Block, and northeastward subduction of the Indochina Block beneath the Yangtze Block during Permian time.

Eruption of the Continental Flood Basalts at -259 Ma in the Emeishan Large Igneous Province, SW China: Evidence from Laser Microprobe ^(40)Ar/^(39)Ar Dating

A suite of continental flood basalts sampled over a vast exposure and stratigraphic thickness in the Emeishan large igneous province （LIP）, SW China was investigated for laser microprobe ^40Ar/^39Ar dating. There are two ^40Ar/^39Ar age groups for these basalts, corresponding to 259-246 Ma and 177-137 Ma, respectively. A well-defined isochron gives an eruption age of huge quantities of mafic magmas at 258.9±3.4 Ma, which is identical to previous dating and paleontological data. Much younger ^40Ar/^39Ar ages for some basalts with Iow-greenschist metamorphic facies probably recorded a late thermo-tectonic event caused by collision between the Yangtze and Qiangtang continental blocks during the Mesozoic, which resulted in the reset of argon isotope system. The ^40Ar/^39Ar age data, we present here, combined with previous dating and paleontological data, suggest relatively short duration （about 3 Ma） of mafic volcanism, which have important implication on mantle plume genesis of the Emeishan continental flood basalts in the LIP.

On the radiogenic heat production of metamorphic,igneous,and sedimentary rocks

Sedimentary rocks cover-73% of the Earth's surface and metamorphic rocks account for approximately91% of the crust by volume. Understanding the average behavior and variability of heat production for these rock types are vitally important for developing accurate models of lithospheric temperature. We analyze the heat production of ～204,000 whole rock geochemical data to quantify how heat production of these rocks varies with respect to chemistry and their evolution during metamorphism. The heat production of metaigneous and metasedimentary rocks are similar to their respective protoliths. Igneous and metaigneous samples increase in heat production with increasing SiO_2 and K_2 O, but decrease with increasing FeO, MgO and CaO. Sedimentary and metasedimentary rocks increase in heat production with increasing Al_2 O_3, FeO, TiO_2, and K_2 O but decrease with increasing CaO. For both igneous and sedimentary rocks, the heat production variations are largely correlated with processes that affect K_2 O concentration and covary with other major oxides as a consequence. Among sedimentary rocks,aluminous shales are the highest heat producing(2.9 μW^(-3)) whereas more common iron shales are lower heat producing(1.7 μW m^(-3)). Pure quartzites and carbonates are the lowest heat producing sedimentary rocks. Globally, there is little definitive evidence for a decrease in heat production with increasing metamorphic grade. However, there remains the need for high resolution studies of heat production variations within individual protoliths that vary in metamorphic grade. These results improve estimates of heat production and natural variability of rocks that will allow for more accurate temperature models of the lithosphere.

Controlling the effect of a distant extremely thick igneous rock in overlying strata on coal mine disasters

Based on theoretical analysis, similarity simulation tests, numerical simulation analysis and field observations, we analyzed rock collapse and rules of fraction evolution of overlying rocks and studied the rules in controlling the effect of an extremely thick igneous rock, found above a main mining coal seam in an area prone to coal mine disasters in the Haizi Coal Mine. The results show that this igneous rock, called a "main key stratum", will not subside nor break for a long time, causing lower fractures and bed separations not to close. The presence of igneous rock plays an important role in rock bursts, mine floods, gas outburst and surface subsidence in coal mines. By analyzing the rules in controlling the effect of this igneous rock, we provide useful references for safety and high efficiency mining in coal mines under special geological conditions.

Research on fabric characteristics and borehole instability mechanisms of fractured igneous rocks

There are favorable exploration prospects in igneous rock reservoirs. However, problems of borehole instability occur frequently during drilling igneous formations, which is a serious impediment to oil and gas exploration and production. The lack of systematic understanding of the inherent instability mechanisms is an important problem. A series of experiments were conducted on several igneous rock samples taken from the sloughing formations in the Tuha area in an attempt to reveal the inherent mechanisms of wellbore instability when drilling in fractured igneous rocks. Research methods involved slurry chemistry, analysis of micro-geological features （Micro-CT imaging, SEM）, and rock mechanics testing. The experimental results indicated that clay minerals were widely distributed in the intergranular space of the diagenetic minerals, crystal defects, and microcracks. Drilling fluid filtrate would invade the rock along the microcracks. Tile invasion amount gradually increased over time, which constantly intensified the hydration and swelling of clay minerals, leading to changes in the microscopic structure of igneous rocks. Primary and secondary microcracks can propagate and merge into single cracks and thus reducing rock cohesion and the binding force along cleavage planes. Based on this result the authors propose that a key towards solving wellbore instability in igneous formations is that specific micro-geological characteristics of the igneous rocks should be taken into consideration in the design of antisloughing drilling muds.

Petrogenesis and Metallogenesis of the Mazaertag Layered Intrusion in the Tarim Large Igneous Province,NW China

The Mazaertag layered intrusion is located in the northwestern part of the Tarim large igneous province where several early Permian layered mafic-ultramafic intrusions host important Fe-Ti oxide deposits. The intrusion covers an area of -0.13 km-2 and has a vertical stratigraphic thickness of at least300 m. It consists chiefly of olivine clinopyroxenite, and is cut through by the nearby mafic-ultramafic dykes. In this paper, we report new mineral chemistry data and whole-rock chemical and isotopic compositions for the Mazaertag intrusion along with whole-rock isotopic compositions for the nearby mafic dykes. The averaged compositions of cumulus olivine, clinopyroxene and intercumulus plagioclase within individual samples range from Fo71-73,Mg^# = 76 to 79 and An65-75 but they do not define sustained reversals. The observed mineral compositions are consistent with the differentiation of a single batch of magma in a closed system. Rocks of the Mazaertag intrusion are characterized by enrichment in light REE relative to heavy REE, positive Nb and Ta anomalies and a small range of age-corrected εNd（t）（-0.1 to ＋0.9） and initial ^87Sr/^86Sr values（0.7044 to 0.7068）. The slightly lower εNdt）, initial ^206Pb/^204Pb and higher initial ^87Sr/^86Sr values of the intrusion compared to those of the least contaminated dykes[εNdt） =＋2.8 to ＋3.4;^206Pb/^204Pb）i = 18.516-18.521;（^87Sr/^86Sr）i = 0.7038-0.7041] imply that the Mazaertag magma was subjected to small to modest degrees of contamination by the upper crust. The Sr-Nd isotopic compositions of the least contaminated dykes are consistent with derivation from a FOZO-like mantle source. The parental magma of the Mazaertag intrusion, estimated from clinopyroxene compositions using mineral-melt partition coefficients, has trace element compositions similar to some of the most primitive mafic dykes in the same area. This suggests that the Mazaertag intrusion and mafic dykes shared a similar mantle source. Therefore, the parental magma of the Mazaertag intrusion was interpreted to have originated from a mantle plume. Based on the Cr2O3 contents in titanomagnetite and less-evolved characteristics of the Mazaertag intrusion compared to the Wajilitag Fe-Ti oxide deposit in Bachu, it is speculated that there might not be a potential to find economic Fe-Ti oxide mineralization in the intrusion.