Influence of Cr element on impact fracture process of ductile Ni-resistant alloyed iron at low temperature

In this study, in order to investigate the influence of Cr element on the impact fracture process of ductile Ni-resistant alloyed iron at low temperature, different contents of Cr element were added to ductile Ni-resistant(DNR) austenitic alloyed iron. The experimental results show that Cr addition can increase the hardness of the DNR alloyed iron, but it has an destructive effect on low-temperature impact properties. Through the analysis of the dynamic load and absorbed energy of samples with different Cr contents in the impact fracture process, and the comparison of the impact fracture process at room and low temperatures, it reveals that Cr addition into the DNR alloyed iron can facilitate the formation of the carbide mixture in Mn23C6 and Cr23C6 with homogeneous and discontinuous distribution. Meanwhile, Cr addition also can improve the the maximum dynamic load and crack initiation energy at low temperature, but has no obvious effect on the yield behavior of the DNR alloyed iron in the impact fracture process. Compared with the impact crack propagation process at room temperature, the metastable propagation energy at low temperature declines significantly with an increase in Cr content. This is because the micro-cracks that caused by the carbides weaken the matrix, resulting in the decline of impact crack propagation resistance. The fracture analysis results also show that the impact fracture mechanism gradually transforms from ductile to brittle with an increase in Cr content at low temperature. It explains that too much Cr addition can lead to brittle fracture even though the austenitic matrix has a good toughness at low temperature.

Low-Energy Multi-Impact Fracture Resistance of Cross Rolled Low Chromium Cast Semi-Steel Containing Rare Earth Grinding Ball

The low-energy multi-impact fracture resistance of the cross rolled low chromium cast semi-steel containing RE grinding balls was studied. Moreover, its damage mode was analyzed by means of metallographic examination, scanning electron microscopic examination and drop ball test. The results show that it can obtain extractive impact fracture resistance after proper heat treatment. More advantages were obtained for the ball worked in the condition of low-imp ductility act. The main reasons are the function of RE and the change in morphology of eutectic carbide network.

A DISCUSSION ON THE RELATIONSHIP BETWEEN THE IMPACT TOUGHNESS AND THE FRACTURE TOUGHNESS

The impact value (AK) measured with classic impact experiment of mechanical properties is a normal index from the five important basic mechanical properties for engineering, but it still has no definite physical meaning. By use of the advanced impact experimental machine, the load-deflection signals under impact loading have been measured. According to the load-deflection curve of 30CrMnSiA steel obtained by this method, the AK value could be divided into the elastic deformation work, the plastic deformation work, the crack forming work, the work of crack propagation and the work of unstable crack propagation. Therefore, we can obtain the expression for the continuous changing of stress and strain under impact load. In this experiment, specimens with three different breaches, U type, V type and linear grooving, are used and the dynamic fracture toughness value (KDIC) of 30CrMnSiA steel is treated and calculated which follows the measuring method of material static fracture toughness, as ASTM E399. The experimental results verify that these impact specimens with three different breaches are satisfactory for plane strain relation under impact load. For high strength 30CrMnSiA steel, the maximum load of load-deflection curve under impact load can represent the unstable propagation load of crack. The precision of the calculated fracture toughness (KDIC) meets the engineering requirement of materials.

The impact of operative timing on clinical outcomes in elderly hip fracture

Objective To study the effect of operative timing on clinical outcomes in elderly hip fracture.Methods Two hundred sixty-seven patients with hip fracture were treated from July 2006 to May 2008.The patients who had an operation within

Impact toughness of a gradient hardened layer of Cr5Mo1V steel treated by laser shock peening

Laser shock peening（LSP） is a widely used surface treatment technique that can effectively improve the fatigue life and impact toughness of metal parts.Cr5Mo1 V steel exhibits a gradient hardened layer after a LSP process.A new method is proposed to estimate the impact toughness that considers the changing mechanical properties in the gradient hardened layer.Assuming a linearly gradient distribution of impact toughness,the parameters controlling the impact toughness of the gradient hardened layer were given.The influence of laser power densities and the number of laser shots on the impact toughness were investigated.The impact toughness of the laser peened layer improves compared with an untreated specimen,and the impact toughness increases with the laser power densities and decreases with the number of laser shots.Through the fracture morphology analysis by a scanning electron microscope,we established that the Cr5Mo1 V steel was fractured by the cleavage fracture mechanism combined with a few dimples.The increase in the impact toughness of the material after LSP is observed because of the decreased dimension and increased fraction of the cleavage fracture in the gradient hardened layer.

Properties of Cross-Rolled Low Alloy White Cast Iron Grinding Ball

The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the means by which they are damaged and characters of the wear surface were analyzed. The results show that high resistance to impact fracture and high abrasiveness can be achieved after appropriate heat treatment at residual rolling temperature. This kind of heat treatment technology has several advantages under low impact and hard abrasive. These results are very useful for determining the optimized heat treatment technology at residual rolling temperatures.

Impact of the fracture on low-order guided waves in long bone

Using ultrasonic guided waves to assess long bone fractures and fracture healing has become a promising diagnostic issue. But the multimode overlap of the guided waves challenges the quantitative evaluation and clinical application. In the preformed study, in order to simplify the signal interpretation, the low-frequency sinusoidial signals were used to only excite SO and A0 modes in fractured long bones. The amplitudes of SO and A0 modes were numerically analyzed with variation in crack width and fracture angle. Numerical simulation, based on the two-dimension finite-difference time-domain （2D-FDTD） reveals that both SO and A0 amplitudes decrease with the fracture widening. However, the increase in fracture angle gradually enhances the A0 amplitude, while with respect to the SO mode, its amplitude shows a non-monotonic trend to the variation in fracture angle with a turning point around 45°. The amplitude ratio between S0 and A0 can reflect the variations in crack width and fracture angles. The simulation illustrates that ultrasonic guided SO and A0 modes are sensitive to the degree of both vertical and oblique fractures in the long cortical bone. These findings may be helpful for fractures diagnosis and healing evaluation of the long bone.