Velocity equation for grenades while impacting on dry sand media

This paper deals with the collision of sphere shape grenades with sand media.The central issue of the article is the establishing of an empirical velocity equation of the grenade while impacting on sand that is used to solve motion equations of the mechanical mechanism inside the impact grenade fuze.The paper focuses on impact velocities that are lower than 5 m s^(-1).An experiment was conducted to study the velocity of the grenade while impacting on dry sand.A high-speed camera video was used to capture the grenade positions.The grenade velocity in the impact process was generated from these video data.Some types of fitting curves are used to regress the velocity equation of the grenade while interacting with the sand media and the best-fitting model is chosen.The result shows the regression curve has a high correlation with the experiment data for grenade velocities below 5 m s^(-1).The received regression equation is useful for analyzing the working ability of the inertial mechanism inside the impact grenade or analyzing and choosing the appropriate parameters of each part in the inertial mechanism to meet the required characteristics of the mechanism.

Extension of Chemoprevention of Seasonal Malaria to Five Cycles and to Children from the Age of 6 to 9 Years in Africa: Analysis of Its Acceptability, Feasibility, Cost and Impact A Systematic Review

Introduction: Seasonal Malaria Chemoprevention (SMC) aims at preventing malaria in children during the high transmission season. It has been recommended by the WHO since 2013 for children from the age of 3-59 months. However, despite the impact of this intervention, a peak in the prevalence and incidence of malaria is observed in children from the age of 5-9 years. The aim of this study is to determine from the current literature the feasibility, impact and cost-effectiveness of extending SMC to five cycles and to older children. Methods: A litterature search of PubMed/Medline, NCBI and Google scholar identified 1333 articles. After reading the titles and abstracts by two authors, 24 articles were selected and submitted for full reading. Random control studies on the extension of SMC, malaria, feasibility of SMC, impact of SMC and cost-effectiveness of SMC were selected. A total of 16 articles were included for the qualitative synthesis after excluding 8 studies. Results: Following the summary of the evidence, we conclude that the extension is feasible but will be confronted with the unavailability of older children. The intervention period coincides with field work. SMC is effective in reducing the prevalence and incidence of malaria and the parasite density in children. The financial cost of administering SMC is lower than that of treating a child suffering from malaria. Conclusion: After analysing the information, it was found that the majority of the African population supports the extension of the SMC to the number of cycles and the age group in order to alleviate the high mortality and morbidity rates among children due to malaria.

Climate Change-Related Disaster Risk Events in Togo: A Systematic Review

Togo is facing significant climate challenges that have profound consequences for its environment, economy, and population. This study provides an overview of various climate phenomena affecting Togo and highlights potential adaptation strategies. We used the inclusion and exclusion criteria (PRISMA) to search both French and English articles on climate change-related disaster risk events in Togo through Google Scholar, Directory of Open Access Journals (DOAJ), and PubMed databases using the keywords “Climate Change”, “Floods”, “Drought”, “Coastal erosion”, “High winds”, “Epidemy”, Heatwaves”, and “Air pollution”. Twenty-five articles from 2000-2023 were included in this study after applying different criteria. Droughts, floods, coastal erosion, food and crop productivity loss, heatwaves, spread of vector-borne diseases, air pollution, and high winds are among the climate phenomena discussed. These challenges are driven by climate change, altering precipitation patterns, increasing temperatures, and rising sea levels. Drought, floods, coastal erosion, loss of food and crop productivity, spread of vector-borne diseases, air pollution and heatwaves are the most climate risks experienced by Togo. Drought contributes to decreased plant cover, water scarcity, and changes in the water and energy balance. Floods cause property damage, health risks, and disruptions to livelihoods. Coastal erosion threatens coastal communities, infrastructure, and ecosystems. Adaptation strategies include early warning systems, improved water management, sustainable agriculture, urban and health planning, and greenhouse gas emissions reduction. Drought-resistant crops, mosquito control, and clean energy adoption are essential.

Top 10 Trends Impacting the Beauty Industry in 2024

At the beginning of 2024,the cosmetic industry is bustling with prosperity and depression.On one hand,the perfume brand DOCUMENTS and the biotechnology company BIO-REGEN received financial investments.The medical company Trautec started pre-listing counseling.The first new raw material in the new year was registered.While on the other hand,the packaging material company Yiside declared bankruptcy.The beauty brand MAOGEPING failed to go public through an IPO again,after eight years’failure.Jinfa Labi,Watsons and Zhonghao Biology were all mired in recession.Hope and challenge hung over the first half month of 2024.With such a“magical”start,2024 will be definitely a year full of uncertainty.

Impact of Plastic Waste on the Human Health in Low-Income Countries: A Systematic Review

Background: Plastic pollution is the accumulation of waste composed of plastic and its derivatives all over the environment. Whether in the form of visible garbage or microparticles, as it slowly degrades, plastic pollution poses significant threats to terrestrial and aquatic habitats and the wildlife that call them home, whether through ingestion, entanglement or exposure to the chemicals contained in the material. Unfortunately, there is a lack of documentation on the impact of plastic waste on human health in low- and middle-income countries (LMICs). Methods: We searched five electronic databases (PubMed, Embase, Global Health, CINAHL and Web of Science) and gray literature, following the preferred reporting elements for systematic reviews and meta-analyses (PRISMA), for the impact of plastic waste on human health in developing countries. We included quantitative and qualitative studies written in English and French. We assessed the quality of the included articles using the Mixed Methods Appraisal tool (MMAT). Results: A total of 3779 articles were initially identified by searching electronic databases. After eliminating duplicates, 3167 articles were reviewed based on title and abstract, and 26 were selected for full-text review. Only three articles were retained. The three articles dealt with practices likely to lead to oral exposure to plastic chemicals in human health, as well as the level of awareness of participants concerning the possible impact of plastic on human health, namely, the use of plastic baby bottles, the use of microwaves to cook food and reheat precooked food, the use of plastic bottles to store water in the refrigerator, water purifier containers with plastic bodies and plastic lunch boxes, the reuse of plastic bags and the inadequacy of treatment facilities. Conclusion: Plastic waste poses different risks to human health at every stage of its life cycle. Hence, strategies must be adopted to raise public awareness of the dangers of plastic waste to their health. Trial registration: The review protocol is registered in the PROSPERO international prospective register of systematic reviews (ID = CRD42023409087).

Systematic Review of Community Type 2 Diabetes Structured Health Education (CT2DSHE)

Aim: This paper aims to evaluate disparities of type 2 diabetes structured health education programmes that is utilised within the communities. Design: systematic review, (a type of secondary research design) aiming to summarize the results of prior primary research studies on available evidence Community type 2 diabetes structured education (CT2DSHE). Methods: Research question: Type 2 diabetic structured health education within a community how effective is it? Qualitative Systematic review, defined as a way to get reliable and objective picture of current available evidence on the specific topic—(CT2DSHE), (Denscombe, 2021) through reflexivity synthesis of available data as an example. This is valuable in time constraints such as project assignments that must be met within specific time and also to bring together available evidence together [1]. Results: This review has shown that CT2DSHE is effective with seven out of the eleven authors supporting, three authors against and one was neutral, further showed that knowledge and skills acquired can last longer with patient activation improved among T2DM patients ideal for sustaining their self-management of T2DM. Conclusion: This research provides suggestive answers to the research question: “Type 2 diabetic structured health education within a community how effective is it?”, This has demonstrated CT2DSHE effectiveness in knowledge acquisition and improving T2DM awareness among T2DM patients, whilst evidencing long effects beyond the study times of 3 - 9 months period in relation to patient activation. Also Identified diabetes education self-management on newly diagnosed (DESMOND) patient as CT2DSHE program for recommendation. Patient or Public Contribution: This work aspires to contribute to CT2DSHE in these areas;Influencing policy decision-making for community diabetes care within the UK and world at large., Contributing to already vast knowledge on diabetes self-management and reasons why?, Influencing educators on how CT2DSHEP are designed, delivered by putting the patient at the Centre and bringing different perspectives on CT2DSHEP in one place that is serving users time of having to consult several resources especially busy clinicians [2] [3].

Opportunities to Improve the Quality of Environmental Reports and the Effectiveness of Environmental Impact Assessment: A Case of Electric Power Transmission Systems in Brazil

A good quality Environmental Impact Statement (EIS) is key for the effectiveness of Environmental Impact Assessment (EIA) processes and consequently to the acceptability of projects subject to EIA. The international literature has contributed to the understanding of the essential aspects to be verified regarding the quality of EIS, offering a wide spectrum of good practice examples related to the content of the studies. Even so, there is a need for empirical studies that allow the identification of specific aspects related to the context of application of the EIS, which could lead to the identification of opportunities to improve both the quality of the reports and also the effectiveness of EIA. Therefore, the present paper is focused on the quality review of a number of EIS submitted to the Brazilian Federal Environmental Agency (Ibama) to instruct the assessment of electric power transmission systems. Based on the application of the EIS quality review package as proposed by Lee and Colley (1992), the outcomes reveal opportunities for improving the scope of EIA, analysis of alternatives, prediction of magnitude and the assessment of impact significance. Finally, the development and/or adaptation of a similar tool for the systematic review of the quality of EIA reports is recommended.

Design and Implementation of USB Key System Based on Dual-Factor Identity Authentication Protocol

With the increasing demand for information security,traditional single-factor authentication technology can no longer meet security requirements.To this end,this paper proposes a Universal Serial Bus(USB)Key hardware and software system based on a two-factor authentication protocol,aiming to improve the security and reliability of authentication.This paper first analyzes the current status and technical principles of USB Key-related research domestically and internationally and designs a two-factor authentication protocol that combines impact/response authentication and static password authentication.The system consists of a host computer and a USB Key device.The host computer interacts with the USB Key through a graphical user interface.The Secure Hash Algorithm 1(SHA-1)and MySQL database are used to implement the authentication function.Experimental results show that the designed two-factor authentication protocol can effectively prevent replay attacks and information tampering,and improve the security of authentication.If the corresponding USB Key is not inserted,the system will prompt that the device is not found.Once the USB Key is inserted,user identity is confirmed through two-factor verification,which includes impact/response authentication and static password authentication.

DESIGN OF DIGITAL IMPACTING FILTER IN CP-EBPSK WITH RANDOM-POLAR COMMUNICATION SYSTEM

To solve the difficulty of designing digital impacting filter in the receiver of random-polar modulated Extended Binary Phase Shift Keying with Continuous Phase (CP-EBPSK), a design method based on Quantum-behaved Particle Swarm Optimization (QPSO) algorithm is proposed. Firstly, QPSO is introduced elaborately, and the basic flow of QPSO is also given. Then, the demodulation principle of digital impacting filter in the communication system of CP-EBPSK with random-polar is demonstrated, and QPSO is utilized to design the digital impacting filter, which also takes the effect of finite word length into consideration when implemented by hardware. Finally, the proposed method is simulated. Simulation results show that the digital impacting filter designed by new method can derive satisfied demodulation performance.

Damage response of conventionally reinforced two-way spanning concrete slab under eccentric impacting drop weight loading

Reinforced concrete(RC)structures are generally designed to carry quasi-static gravity loads through almost indispensable components namely slab,however,it may be subjected to high intense loads induced from the impact of projectiles generated by the tornado,falling construction equipment,and also from accidental explosions during their construction and service lifespan.Impacts due to rock/boulder falls do occur on the structures located especially in hilly areas.Such loadings are not predictable but may cause severe damage to the slab/structure.It stimulates structural engineers and researchers to investigate and understand the dynamic response of RC structures under such impulsive loading.This research work first investigates the performance of 1000×1000×75 mm^(3)conventionally reinforced two-way spanning normal strength concrete slab with only tension reinforcement(0.88%)under the concentric impact load(1035 N)using the finite element method based computer code,ABAQUS/Explicit-v.6.15.The impact load is delivered to the centroid of the slab using a solid-steel cylindroconical impactor(drop weight)with a flat nose of diameter 40 mm,having a total mass of 105 kg released from a fixed height of 2500 mm.Two popular concrete constitutive models in ABAQUS namely;Holmquist-Johnson-Cook(HJC)and Concrete Damage Plasticity(CDP),with strain rate effects as per fib MODEL CODE 2010,are used to model the concrete material behavior to impact loading and to simulate the damage to the slab.The slab response using these two models is analyzed and compared with the impact test results.The strain rate effect on the reinforcing steel bars has been incorporated in the analysis using the Malvar and Crawford(1998)approach.A classical elastoplastic kinematic idealization is considered to model the steel impactor and support system.Results reveal that the HJC model gives a little overestimation of peak displacement,maximum acceleration,and damage of the slab while the predictions given by the CDP model are in reasonable agreement with the experimental test results/observations available in the open literature.Following the validation of the numerical model,analyses have been extended to further investigate the damage response of the slab under eccentric impact loadings.In addition to the concentric location(P1)of the impacting device,five locations on a quarter of the slab i.e.,two along the diagonal(P2&P3),the other two along the mid-span(P4&P5),and the last one(P6)between P3 and P5,covering the entire slab,are considered.Computational results have been discussed and compared,and the evaluation of the most damaging location(s)of the impact is investigated.It has been found that the most critical location of the impact is not the centroid of the slab but the eccentric one with the eccentricity of 1/6th of the span from the centroid along the mid-span section.

Review of peri-urban agriculture as a regional ecosystem service

The peri-urban area possesses mixed characteristics of rural and urban areas,i.e.,agricultural,and built-up land.This review explains various themes and concepts of peri-urban areas and the importance of peri-urban agriculture(PUA)as an ecosystem service(ES)for their surrounding areas.The methodological approach is a systematic literature search and explanatory review of books and journal articles.The focus of the discussion is as follows:(1)quantification of review results,(2)urbanization pressures,peri-urban,and governance,(3)two different concepts about the peri-urban area,(4)protection of PUA and their resilience,and(5)role of PUA in providing ESs to other regions.The review shows that PUA is more crucial in urban areas than in rural areas in terms of food supply,ecology and biodiversity preservation,disaster mitigation,and recreation.One of the primary causes of PUA loss is massive urban expansion,which entails the conversion of agricultural land in peri-urban areas into built-up land.Hence,we suggest that every country should develop a peri-urban management policy.We argue that sociocultural biases in PUA have resulted in many institutional constraints on peri-urban management being incorporated within existing political and regulatory frameworks,including planning practices and longstanding laws and regulations.

CODIMENSION TWO BIFURCATIONS AND HOPF BIFURCATIONS OF AN IMPACTING VIBRATING SYSTEM

Bifurcation problems of a spring-mass system vibrating against an infinite large plane are studied in this paper. It is shown that there exist phenomena of codimension two bifurcations when the ratios of frequencies are in the neigborhood of the same special values and the coefficient of restitution approach unity. By theory of normal forms, we reduce Poincare maps to normal forms.and find flip bifurcations, Hopf bifurcations of fixed points and that of period two points The theoretical solutions are verified by numerical computations.

Embedded System Development for Detection of Railway Track Surface Deformation Using Contour Feature Algorithm

Derailment of trains is not unusual all around the world,especially in developing countries,due to unidentified track or rolling stock faults that cause massive casualties each year.For this purpose,a proper condition monitoring system is essential to avoid accidents and heavy losses.Generally,the detection and classification of railway track surface faults in real-time requires massive computational processing and memory resources and is prone to a noisy environment.Therefore,in this paper,we present the development of a novel embedded system prototype for condition monitoring of railway track.The proposed prototype system works in real-time by acquiring railway track surface images and performing two tasks a)detect deformation(i.e.,faults)like squats,shelling,and spalling using the contour feature algorithm and b)the vibration signature on that faulty spot by synchronizing acceleration and image data.A new illumination scheme is also proposed to avoid the sunlight reflection that badly affects the image acquisition process.The contour detection algorithm is applied here to detect the uneven shapes and discontinuities in the geometrical structure of the railway track surface,which ultimately detects unhealthy regions.It works by converting Red,Green,and Blue(RGB)images into binary images,which distinguishes the unhealthy regions by making them white color while the healthy regions in black color.We have used the multiprocessing technique to overcome the massive processing and memory issues.This embedded system is developed on Raspberry Pi by interfacing a vision camera,an accelerometer,a proximity sensor,and a Global Positioning System(GPS)sensors(i.e.,multi-sensors).The developed embedded system prototype is tested in real-time onsite by installing it on a Railway Inspection Trolley(RIT),which runs at an average speed of 15 km/h.The functional verification of the proposed system is done successfully by detecting and recording the various railway track surface faults.An unhealthy frame’s onsite detection processing time was recorded at approximately 25.6ms.The proposed system can synchronize the acceleration data on specific railway track deformation.The proposed novel embedded system may be beneficial for detecting faults to overcome the conventional manual railway track condition monitoring,which is still being practiced in various developing or underdeveloped countries.

Time-sequenced damage behavior of reactive projectile impacting double-layer plates

The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the damage mechanism.The influences of impact velocity and reactive projectile chemical characteristics on the damage effect are decoupled analyzed based on this model.These analyses indicate that the high energy releasing efficiency and fast reaction propagation velocity of the reactive projectile are conducive to enhancing the damage effect.The experiments with various reactive projectiles impact velocity increasing from 702 to 1385 m/s were conducted to verify this model.The experimental results presented that,the damage hole radius of the rear-plate increases with the increase of impact velocity.At the impact velocity of 1350 m/s,the radius of damage hole formed by PTFE/Al/Bi_(2)O_(3),PTFE/Al/MoO_(3),PTFE/Al/Fe_(2)O_(3)projectile on the rear-plate become smaller in sequence.These results are consistent with the analytical model prediction,demonstrating that this model can predict the damage effect quantitatively.This work is of constructive significance to the application of reactive projectiles.

Factors Impacting Teacher Stress and Mitigation of This Stress in UK School System

Teacher plays an essential role in the lives of children.In addition to promoting their learning and improving academic performance,teachers have a major character in developing student’s creative potential and growing into responsible citizens.However,in recent years,a report by National Foundation for Educational(2019)claimed that the teacher has faced many challenges than other occupations.Stress is one of the most challenges for the teacher to overcome.The main sources of teacher stress generally come from personal,interpersonal as well as organization.This essay explores and discusses the factors that impact or affect teacher stress,exploring the theories and concepts associated with teacher stress and mitigation practices for teacher stress in the United Kingdom school system-from primary and secondary school.

Biophysical warming patterns of an open-top chamber and its short-term influence on a Phragmites wetland ecosystem in China

Passive-warming, open-top chambers(OTCs) are widely applied for studying the effects of future climate warming on coastal wetlands. In this study, a set of six OTCs were established at a Phragmites wetland located in the Yellow River Delta of Dongying City, China. With data collected through online transmission and in-situ sensors, the attributes and patterns of realized OTCs warming are demonstrated.The authors also quantified the preliminary influence of experimental chamber warming on plant traits.OTCs produced an elevated average air temperature of 0.8°C(relative to controls) during the growing season(June to October) of 2018, and soil temperatures actually decreased by 0.54°C at a depth of 5 cm and 0.46°C at a depth of 30 cm in the OTCs. Variations in diel patterns of warming depend greatly on the heat sources of incoming radiation in the daytime versus soil heat flux at night. Warming effects were often larger during instantaneous analyses and influenced OTCs air temperatures from-2.5°C to 8.3°C dependent on various meteorological conditions at any given time, ranging from cooling influences from vertical heat exchange and vegetation to radiation-associated warming. Night-time temperature depressions in the OTCs were due to the low turbulence inside OTCs and changes in surface soilatmosphere heat transfer. Plant shoot density, basal diameter, and biomass of Phragmites decreased by23.2%, 6.3%, and 34.0%, respectively, under experimental warming versus controls, and plant height increased by 4.3%, reflecting less carbon allocation to stem structures as plants in the OTCs experienced simultaneous wind buffering. While these passive-warming OTCs created the desired warming effects both to the atmosphere and soils, pest damages on the plant leaves and lodging within the OTCs were extensive and serious, creating the need to consider control options for these chambers and the replicated OTCs studies underway in other Chinese Phragmites marshes(Panjin and Yancheng).

Effects on Sedimentary Processes via Upper Triassic Climate Forcing Caused by Multiple Impacting and Large Igneous Provinces (LIP)-Rifting/Degassing: Jordanian Platform/Arabian Plate and Germanic Basin/Central Europe

Upper Triassic sedimentary systems of both the Arabian Plate and the Germanic Basin reveal climate- and plate tectonic-forced effects through certain time-intervals experienced by architectural elements, lithofacies types, unconformities, flash flood deposits, maximum flooding surfaces/sequence boundary (MFS/SB), mineralogy, and isotope anomalies. Further, Moon recession and changes of Earth’s rotation velocity (core/mantle boundary) are associated with multiple impacting and large igneous provinces/Mid Oceanic Ridge Basalt, LIP/MORB-rifting/degassing. While acidification (by degassing, sturz-rain) does influence tectosilicates and carbonates, montmorillonite represents a key mineral as transformation of volcanic/impact glass (Tephra) to be found as co-components in and in certain pelite units as “boundary clay-suspicions” (mixture of eolian paleoloess, pelite, paleosol, and tephra → tuffite). Obviously, unconformities and sequence boundaries of both study areas separate and dislocate interrupted ∂13C and 87Sr/86Sr-data groups along the isotope curves. Both Proto-Arctic Ocean rifting/degassing comprising kimberlitic pyroclastic eruptions and Neotethys rifting/degassing as well as multiple impacting played the most important role during the Norian, followed by the incipient Central Atlantic Magmatic Provinces rifting since the Rhaetian. The following associations are encountered and dealt with in this study: Sequence boundaries-∂13C, maximum flooding surfaces-(FUCs)-∂13C, unconformities-plate motion, tephra-pelite-tuffite-montmorillonite. Norian: maximum flooding surfaces (MFSs)-“paleosol”/boundary clay?-rifting-volcanism, Moon/Earth data change. So the Norian (~221 - 206 Ma) hosts anomalous “amalgamated maximum flooding surfaces (MFSs)”, amalgamated paleosol (Jordanian Platform), multiple impacting (~219 - 214 Ma), the maximum opening of the Proto-Arctic Ocean (PAO) (~230 - 200 Ma), Neo-Tethys (NT)-subvolcanic (sills, dikes) in the NE Dead Sea area prior the Rhaetian, and a significant change of Earth/Moon relation data. The study concludes that rare and extreme events are very strongly shaping the geologic constellations in the Earth System.

Impact of interconnections and renewable energy integration on the Philippine-Sabah Power Grid systems

This study presents a comprehensive impact analysis of the rotor angle stability of a proposed international connection between the Philippines and Sabah,Malaysia,as part of the Association of Southeast Asian Nations(ASEAN)Power Grid.This study focuses on modeling and evaluating the dynamic performance of the interconnected system,considering the high penetration of renewable sources.Power flow,small signal stability,and transient stability analyses were conducted to assess the ability of the proposed linked power system models to withstand small and large disturbances,utilizing the Power Systems Analysis Toolbox(PSAT)software in MATLAB.All components used in the model are documented in the PSAT library.Currently,there is a lack of publicly available studies regarding the implementation of this specific system.Additionally,the study investigates the behavior of a system with a high penetration of renewable energy sources.Based on the findings,this study concludes that a system is generally stable when interconnection is realized,given its appropriate location and dynamic component parameters.Furthermore,the critical eigenvalues of the system also exhibited improvement as the renewable energy sources were augmented.

The Securitization of US Trade Policy and Its Impact on the World Trade System

Since Biden took office,the US’foreign trade policy has demonstrated a dual focus.On the one side,it continued and stepped up the trade restriction policies against China under the Trump administration,particularly the crackdown on Chinese technology enterprises;on the other hand,it eased the strained economic and trade relations during the Trump era with its allies and partner countries.

Soiling Effect and Remedial Measures of Solar Photovoltaic System Performance in Kuwait

The Gulf Cooperation Countries have the advantages of fundamental characteristics and abundant natural resources due to the high proportion of solar radiation, which helps to expand the transition to renewable energy, especially in solar projects. The Kuwait location was chosen for this research because of its high dust levels and average daily sunshine of 9.4 hours. The soiling map of Kuwait was then created using PVsyst software. A theoretical and mathematical model for 100 MW was developed based on many environmental and technical parameters. The model was run with Kuwait parameters and 100 MW solar PV power plant capacity. The results show that more than 25% of total generated electricity could be lost annually without any mitigation strategy. Furthermore, the efficiency loss could increase by around 50% during the seasons with sandstorms and high soiling rates. Additionally, manual and automatic cleaning methods were found to increase energy production from 112,092 MWh to 207,300 MWh. Moreover, manual cleaning reduced energy costs by 4.9%, but automated cleaning resulted in a 17.34% higher energy-saving cost than a system without cleaning. In addition, when using the automatic cleaning system, the system’s payback period was reduced from 9.22 to 7.86 years. Therefore, an automated cleaning system is recommended for use in Kuwait.