Optimal Conditions for Preparing Ultra-Fine CeO_2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor （SCISR） from Ce（NO3）3· 6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide （CeO2） powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce（NO3）3 and NH4HCO3 solutions were 02,5 and 0.3 mol · L^-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g · L^-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r · min^- 1,80 ℃, 20 min, 5 - 6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8 -2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point 5 group was OH^5-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor （STR）.

Experimental Investigation on Flow and Drying Characteristics of Impinging Stream Drying

Based on the experimental investigation of one-stage semi-circular impinging stream drying, the experiments with the two-stage semi-circular, as well as the vertical and semi-circular combined impinging stream drying were conducted. The variations of system pressure drop, the mean residence time of particles with the mass flow-rate ratio and air velocity etc, were determined. The influences of inlet air temperature, mass flow-rate ratio, initial moisture content of particles and air velocity etc. on drying characteristics were also studied. The results indicate that the vertical and semi-circular combined impinging stream drying can make full use of the advantages of both the vertical and semi-circular impinging stream drying. Reasonable mass flow-rate ratio, air velocity, and higher inlet air temperature should be used for less energy consumption and cost during drying process.

Preparation by High-gravity Technology of a Cu/N-TiO_(2) Nanophotocatalyst for Photodegradation of Phenol Wastewater

TiO_(2) is a promising photocatalyst,but its practical use is restricted by its low catalytic efficiency caused by the large particle size and uneven size distribution,which arise from the limited contact area of the liquid-liquid interface during synthesis.Impinging stream-rotating packed bed(IS-RPB)reactors,which are used for process intensification,overcome the mixing limitation of traditional stirred-tank reactors and provide a micromixing environment at the molecular scale for the two liquid phases,which can reduce the particle size and distribution range.Cu/N-TiO_(2) nanoparticles were prepared in an IS-RPB reactor by the one-step precipitation method using urea as the nitrogen source,titanyl sulfate as the titanium source,copper chloride as the copper source,and ammonium hydroxide as the precipitant.The particle size of the photocatalyst was about 11.40 nm with a narrow size distribution measured by scanning electron microscopy and transmission electron microscopy.X-ray photoelectron spectroscopy showed that N replaced some O and was uniformly dispersed in the TiO_(2) lattice as interstitial and substitutional N.Cu replaced some Ti and was present as Cu^(2+).The synergistic effects of these two elements formed a new impurity energy level and reduced the band gap energy of the TiO_(2) nanoparticles.The specific surface area of the Cu/N-TiO_(2) nanoparticles was 152.97 m^(2)/g.The effects of the main factors on the degradation rate were studied,and the removal efficiency reached 100%under the optimal operating conditions after 2 h ultraviolet irradiation.The electron paramagnetic resonance measurements showed that the superoxide radical played a main role in the degradation process,whereas the photogenerated holes and hydroxyl radicals had weak effects.

Characterization of micro-mixing in a novel impinging streams reactor

This paper presents an experimental investiga-tion of a novel impinging stream reactor(ISR)with the aim of high mixing intensity.The integral mixing quality in the reactor was measured with the iodide-iodate reaction and showed excellent mixing performance.The impact of the operating parameters,such asfluxes,circulation and inter-nozzle distances,was investigated in terms of segregation index.The results showed that the increase offlux,the decrease of inter-nozzle distance and a suitable circulation can improve the micro-mixing efficiency.Based on turbulence theory,it was estimated that the characteristic micro-mixing time was 0.002–0.02 s,which was much shorter than that in the stirred tank reactor.The micro-mixing time was related to the segregation index,which was in good agreement with those in the literature.

Residence time distribution and modeling of the liquid phase in an impinging stream reactor

Based on some experimental investigations of liquid phase residence time distribution(RTD)in an impinging stream reactor,a two-dimensional plug-flow dispersion model for predicting the liquid phase RTD in the reactor was proposed.The calculation results of the model can be in good agreement with the experimental RTD under different operating conditions.The axial liquid dispersion coefficient increases monotonously with the increasing liquid flux,but is almost independent of gas flux.As the liquid flux and the gas flux increase,the liquid dispersion coefficient of center-to-wall decreases.The axial liquid dispersion coefficient is much larger than that of center-to-wall,which indicates that the liquid RTD is dominated mainly by axial liquid dispersion in the impinging stream reactor.

Lattice Boltzmann Study of Flow and Temperature Structures of Non-Isothermal Laminar Impinging Streams

Previous works on impinging streams mainly focused on the structures of flow field,but paid less attention to the structures of temperature field,which are very important in practical applications.In this paper,the influences of the Reynolds number(Re)and Prandtl number(Pr)on the structures of flow and temperature fields of non-isothermal laminar impinging streams are both studied numerically with the lattice Boltzmann method,and two cases with and without buoyancy effect are considered.Numerical results show that the structures are quite different in these cases.Moreover,in the case with buoyancy effect,some new deflection and periodic structures are found,and their independence on the outlet boundary condition is also verified.These findings may help to understand the flow and temperature structures of non-isothermal impinging streams further.