Using Target Ablation for Ion Beam Quality Improvement

During the laser foil interaction, the output ion beam quality including the energy spread and beam divergence can be improved by the target ablation, due to the direct laser acceleration （DLA） electrons generated in tile ablation plasma. The acceleration field established at the target rear by these electrons, which is highly directional and triangle-envelope, is helpful for the beam quality. With the help of the target ablation, both the beam divergence and energy spread will be reduced. If the ablation is more sufficient, the impact of DLA-electron-caused field will be strengthened, and the beam quality will be better, confirmed by the particle-in-cell simulation.

Improvement of Laser Frequency Stabilization for the Optical Pumping Cesium Beam Standard

A method is presented to improve the laser frequency stabilization for the optical pumping cesium clock. By comparing the laser frequency stabilization of different schemes, we verify that the light angle is an important factor that limits the long-term frequency stability. We minimize the drift of the light angle by using a fiber- coupled output, and lock the frequency of a distributed-feedback diode laser to the fluorescence spectrum of the atomic beam. The measured frequency stability is about 3.5 ×10^-11 at i s and reaches 1.5 × 10^-12 at 2000s. The Allan variance keeps going down for up to thousands of seconds, indicating that the medium- and long-term stability of the laser frequency is significantly improved and perfectly fulfills the requirement for the optical pumping cesium clock.

An improved equivalent beam model of large periodic beam-like space truss structures

Space truss structures are essential components for space-based remote sensing loads with high spatial and temporal resolutions.To achieve high-precision vibration control,an accurate and efficient dynamics model is essential.In addition to the current equivalent beam model(EBM)based on the classical continuum theory,an improved equivalent beam model(IEBM)is proposed that considers the impact of the distinction between trusses and beams on torsional and shear deformations,as well as the impact of shear deformation on flexural rigidity.According to the displacement expressions of spatial beams,torsional,shear,and bending correction coefficients are introduced to derive expressions of strain energy and kinetic energy.The energy equivalence principle is then utilized to calculate the elasticity and inertia matrices,and dynamics equations are established using the finite element method.Subsequently,an IEBM is constructed by employing the particle swarm optimization approach to determine the correction coefficients with the truss natural frequency as the optimization target.The natural vibration characteristics of the structure are estimated for various material properties.Compared with the full-scale finite element model,the EBM reaches a maximum error of 80%for a low modulus of elasticity,while the maximum error of the IEBM is less than 2%for any given parameters,indicating its superior accuracy to the EBM.

Photoinjector beam quality improvementby shaping the wavefront of a drive laser with oblique incidence

To increase the quantum efficiency （QE） of a copper photocathode and reduce the thermal emit- tance of an electron beam, a drive laser with oblique incidence was adopted in a BNL type photocathode rf gun. The disadvantageous effects on the beam quality caused by oblique incidence were analyzed qualitatively. A simple way to solve the problems through wavefront shaping was introduced and the beam quality was improved.

Depth resolution improvement of streak tube imaging lidar system using three laser beams

The work proposes a three-laser-beam streak tube imaging lidar system. Besides the main measuring laser beam,the second beam is used to decrease the error of time synchronization. The third beam has n＋0.5 pixels＇ difference compared to the main measuring beam on a CCD, and it is used to correct the error caused by CCD discrete sampling. A three-dimensional（3D） imaging experiment using this scheme is carried out with time bin size of 0.066 ns（i.e., corresponding to a distance of 9.9 mm）. An image of a 3D model is obtained with the depth resolution of 〈2 mm, which corresponds to ~0.2 pixel.