Research on Reservoir Landslide Thrust Based on Improved Morgenstern-Price Method

The curve of landslide thrust plays a key role in landslide design.The commonly used transfer coefficient method(TCM)and Morgenstern-Price method(MPM)are analyzed.TCM does not take into account the moment balance between slices.Although MPM considers the moment balance,the calculation is complex,and it does not consider that the force between slices may be less than zero at the back edge of the landslide.The rationality and feasibility of the improved MPM are verified by calculating the landslide stability coefficient and landslide thrust at different reservoir water levels.This paper studies the law of landslide thrust when the reservoir water level changes,and discusses the determination of design thrust,to provide a certain theoretical basis for the design of reservoir landslides.

A spatiotemporal evolution model of a short-circuit arc to a secondary arc based on the improved charge simulation method

The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experimental analysis of the evolution process of the short-circuit arc to the secondary arc is critical.In this study,an improved charge simulation method was used to develop the internal-space electric-field model of the short-circuit arc.The intensity of the electric field was used as an independent variable to describe the initial shape of the secondary arc.A secondary arc evolution model was developed based on this model.Moreover,the accuracy of the model was evaluated by comparison with physical experimental results.When the secondary arc current increased,the arcing time and dispersion increased.There is an overall trend of increasing arc length with increasing arcing time.Nevertheless,there is a reduction in arc length during arc ignition due to short circuits between the arc columns.Furthermore,the arcing time decreased in the range of 0°-90°as the angle between the wind direction and the x-axis increased.This work investigated the method by which short-circuit arcs evolve into secondary arcs.The results can be used to develop the secondary arc evolution model and to provide both a technical and theoretical basis for secondary arc suppression.

Dynamic Characteristics of Functionally Graded Timoshenko Beams by Improved Differential Quadrature Method

This study proposes an effective method to enhance the accuracy of the Differential Quadrature Method(DQM)for calculating the dynamic characteristics of functionally graded beams by improving the form of discrete node distribution.Firstly,based on the first-order shear deformation theory,the governing equation of free vibration of a functionally graded beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam axial displacement,transverse displacement,and cross-sectional rotation angle by considering the effects of shear deformation and rotational inertia of the beam cross-section.Then,ignoring the shear deformation of the beam section and only considering the effect of the rotational inertia of the section,the governing equation of the beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam transverse displacement.Based on the differential quadrature method theory,the eigenvalue problem of ordinary differential equations is transformed into the eigenvalue problem of standard generalized algebraic equations.Finally,the first several natural frequencies of the beam can be calculated.The feasibility and accuracy of the improved DQM are verified using the finite element method(FEM)and combined with the results of relevant literature.

A flexible multiscale algorithm based on an improved smoothed particle hydrodynamics method for complex viscoelastic flows

Viscoelastic flows play an important role in numerous engineering fields,and the multiscale algorithms for simulating viscoelastic flows have received significant attention in order to deepen our understanding of the nonlinear dynamic behaviors of viscoelastic fluids.However,traditional grid-based multiscale methods are confined to simple viscoelastic flows with short relaxation time,and there is a lack of uniform multiscale scheme available for coupling different solvers in the simulations of viscoelastic fluids.In this paper,a universal multiscale method coupling an improved smoothed particle hydrodynamics(SPH)and multiscale universal interface(MUI)library is presented for viscoelastic flows.The proposed multiscale method builds on an improved SPH method and leverages the MUI library to facilitate the exchange of information among different solvers in the overlapping domain.We test the capability and flexibility of the presented multiscale method to deal with complex viscoelastic flows by solving different multiscale problems of viscoelastic flows.In the first example,the simulation of a viscoelastic Poiseuille flow is carried out by two coupled improved SPH methods with different spatial resolutions.The effects of exchanging different physical quantities on the numerical results in both the upper and lower domains are also investigated as well as the absolute errors in the overlapping domain.In the second example,the complex Wannier flow with different Weissenberg numbers is further simulated by two improved SPH methods and coupling the improved SPH method and the dissipative particle dynamics(DPD)method.The numerical results show that the physical quantities for viscoelastic flows obtained by the presented multiscale method are in consistence with those obtained by a single solver in the overlapping domain.Moreover,transferring different physical quantities has an important effect on the numerical results.

A method for predicting the water-flowing fractured zone height based on an improved key stratum theory

In the process of using the original key stratum theory to predict the height of a water-flowing fractured zone(WFZ),the influence of rock strata outside the calculation range on the rock strata within the calculation range as well as the fact that the shape of the overburden deformation area will change with the excavation length are ignored.In this paper,an improved key stratum theory(IKS theory)was proposed by fixing these two shortcomings.Then,a WFZ height prediction method based on IKS theory was established and applied.First,the range of overburden involved in the analysis was determined according to the tensile stress distribution range above the goaf.Second,the key stratum in the overburden involved in the analysis was identified through IKS theory.Finally,the tendency of the WFZ to develop upward was determined by judging whether or not the identified key stratum will break.The proposed method was applied and verified in a mining case study,and the reasons for the differences in the development patterns between the WFZs in coalfields in Northwest and East China were also fully explained by this method.

Seasonal variability of the mixed layer depth determined using an improved maximum angle method in the Arctic basins

To investigate the spatiotemporal variations in the mixed layer depth(MLD)in the Arctic basins,a new criterion to determine the MLD,called the improved maximum angle method(IMAM),was developed.A total of 45123 potential density profiles collected using Ice-Tethered Profilers(ITPs)in the Arctic basins during 2005-2021 were used to demonstrate the method’s effectiveness.By comparing the results obtained by the fixed threshold method(FTM),percentage threshold method(PTM),and maximum gradient method(MGM)for profiles in the Canada Basin,Makarov Basin,and Eurasian Basin,we determined that the quality index(1.0 for perfect identification of the MLD)of the IMAM regarding the assessment of the MLD determination method reached 0.94,which is much greater than those of other criteria.Moreover,two types of the density profiles were identified based on the mixed layer development stage.The MLDs of the typical profiles determined using the IMAM were found to have better consistency with the original definition.By utilizing the new mixed layer criterion,the seasonal variations and regional differences in the MLD in the Arctic basins were analyzed.Spatially,the summer and winter MLDs in the Canada Basin were the shallowest(13.55 m in summer,26.76 m in winter)than those in the Makarov(29.51 m in summer,49.08 m in winter)and Eurasian(20.36 m in summer,46.81 m in winter)basins due to the stable stratification in the upper ocean and the subsequent small effects of dynamic and thermodynamic processes(wind-driven stirring and brine rejection)in the Canada Basin.Seasonally,in the three Arctic basins,the average MLD was shallowest(22.77 m)in summer;it deepened through autumn and reached a winter maximum(41.12 m).

Isolation of the Flanking Sequences Adjacent to Transgenic T-DNA in Brassica napus Genome by an Improved Inverse PCR Method

[Objective] The research aimed to isolate flanking sequences adjacent to the transgenic T-DNA in Brassica napus by an improved inverse PCR method.[Method] Using single clone of transgenic FS4 in Brassica napus as the research materials,total DNA was extracted from transgenic Brassica napus by using modified CTAB method.After enzyme digestion and purification,self-joining was made.Two circles of nested PCR and the sequence alignment were carried out.[Result] A fragement with the size of 4.0 kb was amplified ...

An Improved Method for DNA Extraction from the Faeces of Red Deer

[Objective] To introduce an improved method for DNA extraction from the faeces of red deer. [Method] Based on the traditional method of CTAB lysis, we proposed an improved DNA extraction method according to the characteristics of red deer faeces. [Result] This improved method extracted high-quality fecal DNA from Tianshan red deer and amplified the mitochondrial cytochrome b gene. With the muscle and fur DNA of red deer as the control, the sequencing results further con- firmed the reliability of the method. [Conclusion] The method requires no proteinase K in the process of extraction, and the extracted DNA can be used for PCR ampli- fication directly without the purification of DNA purification kit, thus, it is cost-saving.

An improved interpolating element-free Galerkin method with a nonsingular weight function for two-dimensional potential problems

In this paper, an improved interpolating moving least-square （IIMLS） method is presented. The shape function of the IIMLS method satisfies the property of the Kronecker 5 function. The weight function used in the IIMLS method is nonsingular. Then the IIMLS method can overcome the difficulties caused by the singularity of the weight function in the IMLS method. The number of unknown coefficients in the trial function of the IIMLS method is less than that of the moving least-square （MLS） approximation. Then by combining the IIMLS method with the Galerkin weak form of the potential problem, the improved interpolating element-free Galerkin （IIEFG） method for two-dimensional potential problems is presented. Compared with the conventional element-free Galerkin （EFG） method, the IIEFG method can directly use the essential boundary conditions. Then the IIEFG method has higher accuracy. For demonstration, three numerical examples are solved using the IIEFG method.

An improved boundary element-free method (IBEFM) for two-dimensional potential problems

The interpolating moving least-squares （IMLS） method is discussed first in this paper. And the formulae of the IMLS method obtained by Lancaster are revised. Then on the basis of the boundary element-free method （BEFM）, combining the boundary integral equation （BIE） method with the IMLS method, the improved boundary element-free method （IBEFM） for two-dimensional potential problems is presented, and the corresponding formulae of the IBEFM are obtained. In the BEFM, boundary conditions are applied directly, but the shape function in the MLS does not satisfy the property of the Kronecker ~ function. This is a problem of the BEFM, and must be solved theoretically. In the IMLS method, when the shape function satisfies the property of the Kronecker 5 function, then the boundary conditions, in the meshless method based on the IMLS method, can be applied directly. Then the IBEFM, based on the IMLS method, is a direct meshless boundary integral equation method in which the basic unknown quantity is the real solution of the nodal variables, and the boundary conditions can be applied directly and easily, thus it gives a greater computational precision. Some numerical examples are presented to demonstrate the method.

Topology optimization using the improved element-free Galerkin method for elasticity

The improved element-free Galerkin （IEFG） method of elasticity is used to solve the topology optimization problems. In this method, the improved moving least-squares approximation is used to form the shape function. In a topology opti- mization process, the entire structure volume is considered as the constraint. From the solid isotropic microstructures with penalization, we select relative node density as a design variable. Then we choose the minimization of compliance to be an objective function, and compute its sensitivity with the adjoint method. The IEFG method in this paper can overcome the disadvantages of the singular matrices that sometimes appear in conventional element-free Galerkin （EFG） method. The central processing unit （CPU） time of each example is given to show that the IEFG method is more efficient than the EFG method under the same precision, and the advantage that the IEFG method does not form singular matrices is also shown.

Solving unsteady Schr?dinger equation using the improved element-free Galerkin method

By employing the improved moving least-square （IMLS） approximation, the improved element-free Galerkin （IEFG） method is presented for the unsteady Schrodinger equation. In the IEFG method, the two-dimensional （2D） trial function is approximated by the IMLS approximation, the variation method is used to obtain the discrete equations, and the essential boundary conditions are imposed by the penalty method. Because the number of coefficients in the IMLS approximation is less than in the moving least-square （MLS） approximation, fewer nodes are needed in the entire domain when the IMLS approximation is used than when the MLS approximation is adopted. Then the IEFG method has high computational efficiency and accuracy. Several numerical examples are given to verify the accuracy and efficiency of the IEFG method in this paper.

An improved complex variable element-free Galerkin method for two-dimensional elasticity problems

In this paper, the improved complex variable moving least-squares （ICVMLS） approximation is presented. The ICVMLS approximation has an explicit physics meaning. Compared with the complex variable moving least-squares （CVMLS） approximations presented by Cheng and Ren, the ICVMLS approximation has a great computational precision and efficiency. Based on the element-free Galerkin （EFG） method and the ICVMLS approximation, the improved complex variable element-free Galerkin （ICVEFG） method is presented for two-dimensional elasticity problems, and the corresponding formulae are obtained. Compared with the conventional EFC method, the ICVEFG method has a great computational accuracy and efficiency. For the purpose of demonstration, three selected numerical examples are solved using the ICVEFG method.

A measurement method for distinguishing the real contact area of rough surfaces of transparent solids using improved Otsu technique

An experimental method of measuring the real contact area of transparent blocks based on the principle of total internal reflection is presented, intending to support the investigation of friction characteristics, heat conduction, and energy dissipation at the contact interface. A laser sheet illuminates the contact interface, and the transmitted laser sheet is projected onto a screen. Then the contact information is acquired from the screen by a camera. An improved Otsu method is proposed to process the data of experimental images. It can compute the threshold of the overall image and filter out all the pixels one by one. Through analyzing the experimental results, we describe the relationship between the real contact area and the positive pressure during a continuous loading process, at different loading rates, with the polymethyl methacrylate（PMMA）material. A hysteresis phenomenon in the relationship between the real contact area and the positive pressure is found and explained.

High-precision solution to the moving load problem using an improved spectral element method

In this paper, the spectral element method(SEM)is improved to solve the moving load problem. In this method, a structure with uniform geometry and material properties is considered as a spectral element, which means that the element number and the degree of freedom can be reduced significantly. Based on the variational method and the Laplace transform theory, the spectral stiffness matrix and the equivalent nodal force of the beam-column element are established. The static Green function is employed to deduce the improved function. The proposed method is applied to two typical engineering practices—the one-span bridge and the horizontal jib of the tower crane. The results have revealed the following. First, the new method can yield extremely high-precision results of the dynamic deflection, the bending moment and the shear force in the moving load problem.In most cases, the relative errors are smaller than 1%. Second, by comparing with the finite element method, one can obtain the highly accurate results using the improved SEM with smaller element numbers. Moreover, the method can be widely used for statically determinate as well as statically indeterminate structures. Third, the dynamic deflection of the twin-lift jib decreases with the increase in the moving load speed, whereas the curvature of the deflection increases.Finally, the dynamic deflection, the bending moment and the shear force of the jib will all increase as the magnitude of the moving load increases.

Analysis of elastoplasticity problems using an improved complex variable element-free Galerkin method

In this paper, based on the conjugate of the complex basis function, a new complex variable moving least-squares approximation is discussed. Then using the new approximation to obtain the shape function, an improved complex variable element-free Galerkin（ICVEFG） method is presented for two-dimensional（2D） elastoplasticity problems. Compared with the previous complex variable moving least-squares approximation, the new approximation has greater computational precision and efficiency. Using the penalty method to apply the essential boundary conditions, and using the constrained Galerkin weak form of 2D elastoplasticity to obtain the system equations, we obtain the corresponding formulae of the ICVEFG method for 2D elastoplasticity. Three selected numerical examples are presented using the ICVEFG method to show that the ICVEFG method has the advantages such as greater precision and computational efficiency over the conventional meshless methods.

The improved element-free Galerkin method forthree-dimensional wave equation

The paper presents the improved element-free Galerkin （IEFG） method for three-dimensional wave propa- gation. The improved moving least-squares （IMLS） approx- imation is employed to construct the shape function, which uses an orthogonal function system with a weight function as the basis function. Compared with the conventional moving least-squares （MLS） approximation, the algebraic equation system in the IMLS approximation is not ill-conditioned, and can be solved directly without deriving the inverse matrix. Because there are fewer coefficients in the IMLS than in the MLS approximation, fewer nodes are selected in the IEFG method than in the element-free Galerkin method. Thus, the IEFG method has a higher computing speed. In the IEFG method, the Galerkin weak form is employed to obtain a dis- cretized system equation, and the penalty method is applied to impose the essential boundary condition. The traditional difference method for two-point boundary value problems is selected for the time discretization. As the wave equations and the boundary-initial conditions depend on time, the scal- ing parameter, number of nodes and the time step length are considered for the convergence study.

An Improved Method for Generating Typical Meteorological Years Used in Building Energy Simulation in China

The present study proposes an improved method for generating better typical meteorological years( TMYs) used in building energy simulation in China. Modifications are made to the commonly used Sandia method,by optimizing the weightings of indices and thus giving more emphasis to dry bulb temperature and relative humidity and less to wind velocity. After analyzing the solar heat gain on the vertical envelop,an index of diffuse radiation rather than direct normal radiation is added for solar radiation. Using the improved method proposed,TMYs for 5 representative cities of 5 major climate zones in China are generated from the meteorological data recorded during the period 1981—2010. The results show that,compared with previous studies,the monthly diffuse solar radiation of typical meteorological months generated by the improved method are the"closest"to the 30-year average,and the comparison between annual diffuse radiation for the TMY and the 30-year annual average is improved,while little adverse effect is produced on global horizontal radiation comparisons,indicating that the improved method is more suitable to generate the TMY data than previous studies.

Improved AHP method and its application in lake environmental comprehensive quality evaluation—a case study of Xuanwu Lake, Nanjing, China

The relative importance of each pollution factor in analytical hierarchy process (AHP) method comes from pooling expert opinions in general. Because expert opinions are based on information and judgment criteria, determining their weight may lead to uncertainty.. Therefore, an improved AHP method had been developed. The process of the improved AHP method involved four key procedures. The weights of pollution factors were completely related to the objective monitoring data through the standardization of these procedures. The environmental comprehensive quality of water and sediment of Xuanwu Lake, Nanjing, China had been evaluated. The environmental quality comprehensive indices (EQCI) of the water in 1991-1995 and 1996-2000 were 3.32 and 1.85, respectively, indicating that the water quality improved. The EQCI of the sediment in 1995 and 2000 indicates that the sediment contamination decreased from 1995 to 2000. Such results agreed with the fact that the lake had been under comprehensive control. However, with the classical AHP method, the EQCI of the sediment in the northwestern part of the lake may have indicated that sediment contamination increased from 1995 to 2000. The discrepancy may have resulted from the judgment difference of the experts. The improved AHP method can avoid arbitrariness of subjective judgment and can reflect the real influential factors of environment pollution in different periods or regions.

An improved interpolating element-free Galerkin method for elasticity

Based on the improved interpolating moving least-squares （ⅡMLS） method and the Galerkin weak form, an improved interpolating element-free Galerkin （ⅡEFG） method is presented for two-dimensional elasticity problems in this paper. Compared with the interpolating moving least-squares （IMLS） method presented by Lancaster, the ⅡMLS method uses the nonsingular weight function. The number of unknown coefficients in the trial function of the ⅡMLS method is less than that of the MLS approximation and the shape function of the ⅡMLS method satisfies the property of Kronecker δ function. Thus in the ⅡEFG method, the essential boundary conditions can be applied directly and easily, then the numerical solutions can be obtained with higher precision than those obtained by the interpolating element-free Galerkin （IEFG） method. For the purposes of demonstration, four numerical examples are solved using the ⅡEFG method.