An improved boundary element-free method (IBEFM) for two-dimensional potential problems

The interpolating moving least-squares （IMLS） method is discussed first in this paper. And the formulae of the IMLS method obtained by Lancaster are revised. Then on the basis of the boundary element-free method （BEFM）, combining the boundary integral equation （BIE） method with the IMLS method, the improved boundary element-free method （IBEFM） for two-dimensional potential problems is presented, and the corresponding formulae of the IBEFM are obtained. In the BEFM, boundary conditions are applied directly, but the shape function in the MLS does not satisfy the property of the Kronecker ~ function. This is a problem of the BEFM, and must be solved theoretically. In the IMLS method, when the shape function satisfies the property of the Kronecker 5 function, then the boundary conditions, in the meshless method based on the IMLS method, can be applied directly. Then the IBEFM, based on the IMLS method, is a direct meshless boundary integral equation method in which the basic unknown quantity is the real solution of the nodal variables, and the boundary conditions can be applied directly and easily, thus it gives a greater computational precision. Some numerical examples are presented to demonstrate the method.

Performance Evaluation of Bottom-Standing Submerged Breakwaters in Regular Waves Using the Meshless Singular Boundary Method

In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. Both the single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. Only the impermeable breakwaters are considered in this study. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with the appropriate mixed-type boundary conditions, and it is solved numerically using the ISBM. The numerical results are presented in terms of the hydrodynamic quantities of reflection and transmission coefficients. The values are first validated against the data of previous studies, computed, and discussed for a variety of structural conditions, including the height, width, and spacing of breakwater submergence. An excellent agreement is observed between the ISBM results and those of other methods. The breakwater width is found to feature marginal effects compared with the height. The present method is shown to accurately predict the resonant conditions at which the maximum reflection and transmission occur. The trapezoidal breakwaters are found to generally present a wide spectrum of reflections, suggesting that they would function better than the rectangular breakwaters. The dual breakwater systems are confirmed to perform much better than single structures.

An improved series expansion method on the multi-frequency analysis of acoustic boundary element

For the multi-frequency acoustic analysis, a series expansion method has been introduced to reduce the computation time of the frequency-independent parts, but the Runge phenomenon will arise when this method is employed in high frequency band. Therefore, this method is improved by analyzing the application condition and proposing the selection principle of the series truncation number. The argument interval can be adjusted with the wavenumber factor. Therefore, the problem of unstable numeration and poor precision can be solved, and the application scope of this method is expanded. The numerical example of acoustic radiation shows that the improved method is correct for acoustic analysis in wider frequency band with less series truncation number and computation amount.

BOUNDARY ELEMENT METHOD FOR IMPROVING FOUNDATION WITH HEAVY TAMPING

The fundamental solution to dynamic elastic differential equation after the Laplace transformation, which was obtained by Cruse and Rizzo, has been utilized to solve the boundary integral equation formulated by the weighted residual method. The boundary element method has been applied to dealing with the heavy tamping problem. As the elasticity modulus of soil is gradually increased after each tamping, and the loading modulus and unloading modulus are quite different, residual deformations can be finally obtained for each tamping. This is a method of nonlinear elastic analysis. The relationship of hammer velocity and falling distance for heavy tamping within liquid has been derived, so providing a theoretical background for heavy tamping under water.