To improve the reliability and accuracy of the global po- sitioning system （GPS）/micro electromechanical system （MEMS）- inertial navigation system （INS） integrated navigation system, this paper proposes two diff...To improve the reliability and accuracy of the global po- sitioning system （GPS）/micro electromechanical system （MEMS）- inertial navigation system （INS） integrated navigation system, this paper proposes two different methods. Based on wavelet threshold denoising and functional coefficient autoregressive （FAR） model- ing, a combined data processing method is presented for MEMS inertial sensor, and GPS attitude information is also introduced to improve the estimation accuracy of MEMS inertial sensor errors. Then the positioning accuracy during GPS signal short outage is enhanced. To improve the positioning accuracy when a GPS signal is blocked for long time and solve the problem of the tra- ditional adaptive neuro-fuzzy inference system （ANFIS） method with poor dynamic adaptation and large calculation amount, a self-constructive ANFIS （SCANFIS） combined with the extended Kalman filter （EKF） is proposed for MEMS-INS errors modeling and predicting. Experimental road test results validate the effi- ciency of the proposed methods.展开更多
To improve the precision of inertial navigation system（INS） during long time operation,the rotation modulated technique（RMT） was employed to modulate the errorr of the inertial sensors into periodically varied sig...To improve the precision of inertial navigation system（INS） during long time operation,the rotation modulated technique（RMT） was employed to modulate the errorr of the inertial sensors into periodically varied signals,and,as a result,to suppress the divergence of INS errors.The principle of the RMT was introduced and the error propagating functions were derived from the rotary navigation equation.Effects of the measurement error for the rotation angle of the platform on the system precision were analyzed.The simulation and experimental results show that the precision of INS was ① dramatically improved with the use of the RMT,and ② hardly reduced when the measurement error for the rotation angle was in arc-second level.The study results offer a theoretical basis for engineering design of rotary INS.展开更多
This paper proposes a technique that global positioning system(GPS)combines inertial navigation system(INS)by using unscented particle filter(UPF)to estimate the exact outdoor position.This system can make up for the ...This paper proposes a technique that global positioning system(GPS)combines inertial navigation system(INS)by using unscented particle filter(UPF)to estimate the exact outdoor position.This system can make up for the weak point on position estimation by the merits of GPS and INS.In general,extended Kalman filter(EKF)has been widely used in order to combine GPS with INS.However,UPF can get the position more accurately and correctly than EKF when it is applied to real-system included non-linear,irregular distribution errors.In this paper,the accuracy of UPF is proved through the simulation experiment,using the virtual-data needed for the test.展开更多
Carrying out experiments and researches on tool bre ak age and undercut of work-piece of free-form surface by using wavelet analysis, both the fault features can be extracted in a special frequency segment of wave let...Carrying out experiments and researches on tool bre ak age and undercut of work-piece of free-form surface by using wavelet analysis, both the fault features can be extracted in a special frequency segment of wave let decompose. According to the feature of transient fault, the author proposes for the first time the automatic determination technology of the threshold by us e of the adaptive filter characteristic of wavelet transform. Based on profound researches on steady fault feature, this dissertation makes an effective token o f steady fault feature by using wavelet energy method, and proposes the new idea to identify cut-in case and cut-out case, thereby successfully gives an uniqu e description quantitatively on the characterization of the variation of fault a nd cutting condition in the monitoring system.展开更多
针对重力扰动引起惯性水平基准姿态测量误差进而导致天文/惯性组合导航系统定位精度下降的问题,提出天文/惯性组合系统中的重力扰动补偿方法。首先,基于导航误差模型分析了影响天文/惯性组合导航系统定位精度的主要因素。其次,推导了重...针对重力扰动引起惯性水平基准姿态测量误差进而导致天文/惯性组合导航系统定位精度下降的问题,提出天文/惯性组合系统中的重力扰动补偿方法。首先,基于导航误差模型分析了影响天文/惯性组合导航系统定位精度的主要因素。其次,推导了重力扰动、惯性水平基准姿态测量误差与天文导航定位误差之间的传播机理。然后,研究了重力扰动建模与修正方法,并将重力扰动补偿方法应用于惯性水平基准的导航解算回路中,实现重力扰动的有效补偿。跑车试验结果表明,所提重力扰动补偿方法可以将天文/惯性组合导航系统中定位误差的振荡幅值由1.6 n mile降低至0.5 n mile。展开更多
基金supported by the National Natural Science Foundation of China (60902055)
文摘To improve the reliability and accuracy of the global po- sitioning system （GPS）/micro electromechanical system （MEMS）- inertial navigation system （INS） integrated navigation system, this paper proposes two different methods. Based on wavelet threshold denoising and functional coefficient autoregressive （FAR） model- ing, a combined data processing method is presented for MEMS inertial sensor, and GPS attitude information is also introduced to improve the estimation accuracy of MEMS inertial sensor errors. Then the positioning accuracy during GPS signal short outage is enhanced. To improve the positioning accuracy when a GPS signal is blocked for long time and solve the problem of the tra- ditional adaptive neuro-fuzzy inference system （ANFIS） method with poor dynamic adaptation and large calculation amount, a self-constructive ANFIS （SCANFIS） combined with the extended Kalman filter （EKF） is proposed for MEMS-INS errors modeling and predicting. Experimental road test results validate the effi- ciency of the proposed methods.
基金Sponsored by the National Natural Science Foundation of China(60604011)
文摘To improve the precision of inertial navigation system（INS） during long time operation,the rotation modulated technique（RMT） was employed to modulate the errorr of the inertial sensors into periodically varied signals,and,as a result,to suppress the divergence of INS errors.The principle of the RMT was introduced and the error propagating functions were derived from the rotary navigation equation.Effects of the measurement error for the rotation angle of the platform on the system precision were analyzed.The simulation and experimental results show that the precision of INS was ① dramatically improved with the use of the RMT,and ② hardly reduced when the measurement error for the rotation angle was in arc-second level.The study results offer a theoretical basis for engineering design of rotary INS.
基金The MKE(the Ministry of Knowledge Economy),Korea,under the ITRC(Information Technology Research Center)support program supervised by the NIPA(National IT Industry Promotion Agency) (NIPA-2012-H0301-12-2006)
文摘This paper proposes a technique that global positioning system(GPS)combines inertial navigation system(INS)by using unscented particle filter(UPF)to estimate the exact outdoor position.This system can make up for the weak point on position estimation by the merits of GPS and INS.In general,extended Kalman filter(EKF)has been widely used in order to combine GPS with INS.However,UPF can get the position more accurately and correctly than EKF when it is applied to real-system included non-linear,irregular distribution errors.In this paper,the accuracy of UPF is proved through the simulation experiment,using the virtual-data needed for the test.
文摘Carrying out experiments and researches on tool bre ak age and undercut of work-piece of free-form surface by using wavelet analysis, both the fault features can be extracted in a special frequency segment of wave let decompose. According to the feature of transient fault, the author proposes for the first time the automatic determination technology of the threshold by us e of the adaptive filter characteristic of wavelet transform. Based on profound researches on steady fault feature, this dissertation makes an effective token o f steady fault feature by using wavelet energy method, and proposes the new idea to identify cut-in case and cut-out case, thereby successfully gives an uniqu e description quantitatively on the characterization of the variation of fault a nd cutting condition in the monitoring system.
文摘针对重力扰动引起惯性水平基准姿态测量误差进而导致天文/惯性组合导航系统定位精度下降的问题,提出天文/惯性组合系统中的重力扰动补偿方法。首先,基于导航误差模型分析了影响天文/惯性组合导航系统定位精度的主要因素。其次,推导了重力扰动、惯性水平基准姿态测量误差与天文导航定位误差之间的传播机理。然后,研究了重力扰动建模与修正方法,并将重力扰动补偿方法应用于惯性水平基准的导航解算回路中,实现重力扰动的有效补偿。跑车试验结果表明,所提重力扰动补偿方法可以将天文/惯性组合导航系统中定位误差的振荡幅值由1.6 n mile降低至0.5 n mile。
