Algebraic processing technique for extracting frequency-dependent shear-wave splitting parameters in an anisotropic medium

Based on the dual source cumulative rotation technique in the time-domain proposed by Zeng and MacBeth（1993）,a new algebraic processing technique for extracting shear-wave splitting parameters from multi-component VSP data in frequency-dependent medium has been developed.By using this dual source cumulative rotation technique in the frequency-domain（DCTF）,anisotropic parameters,including polarization direction of the shear-waves and timedelay between the fast and slow shear-waves,can be estimated for each frequency component in the frequency domain.It avoids the possible error which comes from using a narrow-band filter in the current commonly used method.By using synthetic seismograms,the feasibility and validity of the technique was tested and a comparison with the currently used method was also given.The results demonstrate that the shear-wave splitting parameters frequency dependence can be extracted directly from four-component seismic data using the DCTF.In the presence of larger scale fractures,substantial frequency dependence would be found in the seismic frequency range,which implies that dispersion would occur at seismic frequencies.Our study shows that shear-wave anisotropy decreases as frequency increases.

A Novel 2-D Signal Processing Scheme for Quasi-Random Step Frequency Signal

Due to the heavy congestion in HF bands, HF radars are restricted to operating within narrow frequency bands. To improve the system bandwidth and avoid heavy interference bands, a quasi-random step frequency signal with discontinuous bands is presented. A novel two-dimensional signal processing scheme for this signal is proposed on the basis of delicate signal analysis. Simulation results demonstrate that the scheme could successfully realize the resolutions by decoupling the range-Doppler ambiguity, and effectively suppress the maximal sidelobe. Moreover, the scheme is simple and has good numerical stability.

CARRIER FREQUENCY OFFSET ESTIMATION FOR INTERLEAVED OFDMA UPLINK BASED ON SUBSPACE PROCESSING

This paper investigates Carrier Frequency Offset (CFO) estimation in the uplink of the Orthogonal Frequency-Division Multiple Access (OFDMA) systems with the interleaved subcarrier assignment. CFOs between the transmitters and the uplink receiver will destroy orthogonality among different subcarriers, hence resulting in inter-carrier interference and multiuser interference. A two-stage frequency offset estimation algorithm based on subspace processing is proposed. The main advantage of the proposed method is that it can obtain the CFOs of all users simultaneously using only one OFDMA block. Compared with the previously known methods, it not only has a relatively low implementation complexity but is also suitable for random subchannel assignment.

A Recursive Method of Time-Frequency Analysis for the Signal Processing of Flutter Test with Progression Variable Speed

Focused on the non-statlonarity and real-time analysis of signal in flutter test with progression variable speed （FTPVS）, a new method of recursive time-frequency analysis is presented. The time-varying system is tracked on-line by building a time-varying parameter model, and then the relevant parameter spectrum can be obtained. The feasibility and advantages of the method are examined by digital simulation. The results of FTPVS at low-speed wind-tunnel promise the engineering application perspective of the method.

Mapping favorable groundwater potential recharge zones using a GIS-based analytical hierarchical process and probability frequency ratio model:A case study from an agro-urban region of Pakistan

In Punjab(Pakistan),the increasing population and expansion of land use for agriculture have severely exploited the regional groundwater resources.Intensive pumping has resulted in a rapid decline in the level of the water table as well as its quality.Better management practices and artificial recharge are needed for the development of sustainable groundwater resources.This study proposes a methodology to delineate favorable groundwater potential recharge zones(FPRI)by integrating maps of groundwater potential recharge index(PRI)with the DRASTIC-based groundwater vulnerability index(VI).In order to evaluate both indexes,different thematic layers corresponding to each index were overlaid in ArcGIS.In the overlay analysis,the weights(for various thematic layers)and rating values(for sub-classes)were allocated based on a review of published literature.Both were then normalized and modified using the analytical hierarchical process(AHP)and a frequency ratio model respectively.After evaluating PRI and FPRI,these maps were validated using the area under the curve(AUC)method.The PRI map indicates that 53%of the area assessed exists in very low to low recharge zones,22%in moderate,and 25%in high to excellent potential recharge zones.The VI map indicates that 38%of the area assessed exists in very low to low vulnerability,33%in moderate,and 29%in high to very high vulnerability zones.The FPRI map shows that the central region of Punjab is moderately-to-highly favorable for recharge due to its low vulnerability and high recharge potential.During the validation process,it was found that the AUC estimated with modified weights and rating values was 79%and 67%,for PRI and VI indexes,respectively.The AUC was less when evaluated using original weights and rating values taken from published literature.Maps of favorable groundwater potential recharge zones are helpful for planning and implementation of wells and hydraulic structures in this region.

Modal Frequency Prediction of Chladni Patterns Using Machine Learning

The introduction of machine learning (ML) in the research domain is a new era technique. The machine learning algorithm is developed for frequency predication of patterns that are formed on the Chladni plate and focused on the application of machine learning algorithms in image processing. In the Chladni plate, nodes and antinodes are demonstrated at various excited frequencies. Sand on the plate creates specific patterns when it is excited by vibrations from a mechanical oscillator. In the experimental setup, a rectangular aluminum plate of 16 cm x 16 cm and 0.61 mm thickness was placed over the mechanical oscillator, which was driven by a sine wave signal generator. 14 Chladni patterns are obtained on a Chladni plate and validation is done with modal analysis in Ansys. For machine learning, a large number of data sets are required, as captured around 200 photos of each modal frequency and around 3000 photos with a camera of all 14 Chladni patterns for supervised learning. The current model is written in Python language and model has one convolution layer. The main modules used in this are Tensor Flow Keras, NumPy, CV2 and Maxpooling. The fed reference data is taken for 14 frequencies between 330 Hz to 3910 Hz. In the model, all the images are converted to grayscale and canny edge detected. All patterns of frequencies have an almost 80% - 99% correlation with test sample experimental data. This approach is to form a directory of Chladni patterns for future reference purpose in real-life application. A machine learning algorithm can predict the resonant frequency based on the patterns formed on the Chladni plate.

A High Performance 0.18μm RF nMOSFET with 53GHz Cutoff Frequency

This paper presents the fabrication and performance of a 0.18μm nMOSFET for RF applications. This device features a nitrided oxide/poly-silicon gate stack, a lightly-doped-drain source/drain extension, a retrograde channel doping profile, and a multiple-finger-gate layout,each of which is achieved with conventional semiconductor fabrication facilities. The 0.18μm gate length is obtained by e-beam direct-writing. The device is fabricated with a simple process flow and exhibits excellent DC and RF performance： the threshold voltage of 0.52V, the sub-threshold swing of 80mV/dec, the drain-induced-barrier-lowering factor of 69mV/V, the off-state current of 0.5nA/μm, the saturation drive current of 458μA/μm （for the 6nm gate oxide and the 3V supply voltage）, the saturation transconductance of 212μS/μm,and the cutoff frequency of 53GHz.

TVAR Time-frequency Analysis for Non-stationary Vibration Signals of Spacecraft

Predicting the time-varying auto-spectral density of a spacecraft in high-altitude orbits requires an accurate model for the non-stationary random vibration signals with densely spaced modal frequency. The traditional time-varying algorithm limits prediction accuracy, thus affecting a number of operational decisions. To solve this problem, a time-varying auto regressive （TVAR） model based on the process neural network （PNN） and the empirical mode decomposition （EMD） is proposed. The time-varying system is tracked on-line by establishing a time-varying parameter model, and then the relevant parameter spectrum is obtained. Firstly, the EMD method is utilized to decompose the signal into several intrinsic mode functions （IMFs）. Then for each IMF, the PNN is established and the time-varying auto-spectral density is obtained. Finally, the time-frequency distribution of the signals can be reconstructed by linear superposition. The simulation and the analytical results from an example demonstrate that this approach possesses simplicity, effectiveness, and feasibility, as well as higher frequency resolution.

Frequency Loss and Recovery in Rolling Bearing Fault Detection

Rolling element bearings are key components of mechanical equipment. The bearing fault characteristics are a ected by the interaction in the vibration signals. The low harmonics of the bearing characteristic frequencies cannot be usually observed in the Fourier spectrum. The frequency loss in the bearing vibration signal is presented through two independent experiments in this paper. The existence of frequency loss phenomenon in the low frequencies, side band frequencies and resonant frequencies and revealed. It is demonstrated that the lost frequencies are actually suppressed by the internal action in the bearing fault signal rather than the external interference. The amplitude and distribution of the spectrum are changed due to the interaction of the bearing fault signal. The interaction mechanism of bearing fault signal is revealed through theoretical and practical analysis. Based on mathematical morphology, a new method is provided to recover the lost frequencies. The multi-resonant response signal of the defective bearing are decomposed into low frequency and high frequency response, and the lost frequencies are recovered by the combination morphological filter(CMF). The e ectiveness of the proposed method is validated on simulated and experimental data.

A Heterogeneous Information Fusion Deep Reinforcement Learning for Intelligent Frequency Selection of HF Communication

The high-frequency(HF) communication is one of essential communication methods for military and emergency application. However, the selection of communication frequency channel is always a difficult problem as the crowded spectrum, the time-varying channels, and the malicious intelligent jamming. The existing frequency hopping, automatic link establishment and some new anti-jamming technologies can not completely solve the above problems. In this article, we adopt deep reinforcement learning to solve this intractable challenge. First, the combination of the spectrum state and the channel gain state is defined as the complex environmental state, and the Markov characteristic of defined state is analyzed and proved. Then, considering that the spectrum state and channel gain state are heterogeneous information, a new deep Q network(DQN) framework is designed, which contains multiple sub-networks to process different kinds of information. Finally, aiming to improve the learning speed and efficiency, the optimization targets of corresponding sub-networks are reasonably designed, and a heterogeneous information fusion deep reinforcement learning(HIF-DRL) algorithm is designed for the specific frequency selection. Simulation results show that the proposed algorithm performs well in channel prediction, jamming avoidance and frequency channel selection.

Spheroidization of molybdenum powder by radio frequency thermal plasma

To control the morphology and particle size of dense spherical molybdenum powder prepared by radio frequency（RF） plasma from irregular molybdenum powder as a precursor, plasma process parameters were optimized in this paper. The effects of the carrier gas flow rate and molybdenum powder feeding rate on the shape and size of the final products were studied. The molybdenum powder morphology was examined using high-resolution scanning electron microscopy. The powder phases were analyzed by X-ray diffraction. The tap density and apparent density of the molybdenum powder were investigated using a Hall flow meter and a Scott volumeter. The optimal process parameters for the spherical molybdenum powder preparation are 50 g/min powder feeding rate and 0.6 m^3/h carrier gas rate. In addition, pure spherical molybdenum powder can be obtained from irregular powder, and the tap density is enhanced after plasma processing. The average size is reduced from 72 to 62 μm, and the tap density is increased from 2.7 to 6.2 g/cm^3. Therefore, RF plasma is a promising method for the preparation of high-density and high-purity spherical powders.

Eigenvalue spectrum analysis for temporal signals of Kerr optical frequency combs based on nonlinear Fourier transform

Based on the nonlinear Schr?dinger equation(NLSE) with damping, detuning, and driving terms describing the evolution of signals in a Kerr microresonator, we apply periodic nonlinear Fourier transform(NFT) to the study of signals during the generation of the Kerr optical frequency combs(OFCs). We find that the signals in different states, including the Turing pattern, the chaos, the single soliton state, and the multi-solitons state, can be distinguished according to different distributions of the eigenvalue spectrum. Specially, the eigenvalue spectrum of the single soliton pulse is composed of a pair of conjugate symmetric discrete eigenvalues and the quasi-continuous eigenvalue spectrum with eye-like structure.Moreover, we have successfully demonstrated that the number of discrete eigenvalue pairs in the eigenvalue spectrum corresponds to the number of solitons formed in a round-trip time inside the Kerr microresonator. This work shows that some characteristics of the time-domain signal can be well reflected in the nonlinear domain.

Non-contact evaluation of the resonant frequency of a microstructure using ultrasonic wave

This paper presents a novel non-contact method for evaluating the resonant frequency of a microstructure, Firstly, the microstructure under test is excited by ultrasonic waves. This excitation method does not impose any undefined load on the specimen like the electrostatic excitation and also this is the first actual use of ultrasonic wave for exciting a microstructure in the literature. Secondly, the amplitudes of the microstructure are determined by image edge detection using a Mexican hat wavelet transform on the vibrating images of the microstructure. The vibrating images are captured by a CCD camera when the microstructure is vibrated by ultrasonic waves at a series of discrete high frequencies （〉30 kHz）. Upon processing the vibrating images, the amplitudes at various excitation frequencies are obtained and an amplitude-frequency spectrum is obtained from which the resonant frequency is subsequently evaluated. A micro silicon structure consisting of a perforated plate （192 × 192 μm） and two cantilever beams （76 × 43 μm） which is about 4 μm thickness is tested. Since laser interferometry is not required, thermal effects on a test object can be avoided. Hence, the setup is relatively simple. Results show that the proposed method is a simple and effective approach for evaluating the dynamic characteristics of microstructures.

Computationally Efficient MUSIC-Based Algorithm for Joint Direction of Arrival (DOA) and Doppler Frequency Estimation in Monostatic MIMO Radar

The problem of joint direction of arrival (DOA) and Doppler frequency estimation in monostatic multiple-input multiple-output (MIMO) radar is studied and a computationally efficient multiple signal classification (CE-MUSIC) algorithm is proposed.Conventional MUSIC algorithm for joint DOA and Doppler frequency estimation requires a large computational cost due to the two dimensional (2D) spectral peak searching.Aiming at this shortcoming,the proposed CE-MUSIC algorithm firstly uses a reduced-dimension transformation to reduce the subspace dimension and then obtains the estimates of DOA and Doppler frequency with only one-dimensional (1D) search.The proposed CE-MUSIC algorithm has much lower computational complexity and very close estimation performance when compared to conventional 2D-MUSIC algorithm.Furthermore,it outperforms estimation of signal parameters via rotational invariance technique (ESPRIT) algorithm.Meanwhile,the mean squared error (MSE) and Cramer-Rao bound (CRB) of joint DOA and Doppler frequency estimation are derived.Detailed simulation results illustrate the validity and improvement of the proposed algorithm.

RFID Complex Event Processing: Applications in Real-Time Locating System

Complex event processing (CEP) can extract meaningful events for real-time locating system (RTLS) applications. To identify complex event accurately in RTLS, we propose a new RFID complex event processing method GEEP, which is based on the timed automata (TA) theory. By devising RFID locating application into complex events, we model the timing diagram of RFID data streams based on the TA. We optimize the constraint of the event streams and propose a novel method to derive the constraint between objects, as well as the constraint between object and location. Experiments prove the proposed method reduces the cost of RFID complex event processing, and improves the efficiency of the RTLS.

Annual Frequency of Tropical Cyclones Directly Affecting Guangdong Province:Prediction Based on LSTM-FC

Tropical cyclone(TC)annual frequency forecasting is significant for disaster prevention and mitigation in Guangdong Province.Based on the NCEP-NCAR reanalysis and NOAA Extended Reconstructed global sea surface temperature(SST)V5 data in winter,the TC frequency climatic features and prediction models have been studied.During 1951-2019,353 TCs directly affected Guangdong with an annual average of about 5.1.TCs have experienced an abrupt change from abundance to deficiency in the mid to late 1980 with a slightly decreasing trend and a normal distribution.338 primary precursors are obtained from statistically significant correlation regions of SST,sea level pressure,1000hPa air temperature,850hPa specific humidity,500hPa geopotential height and zonal wind shear in winter.Then those 338 primary factors are reduced into 19 independent predictors by principal component analysis(PCA).Furthermore,the Multiple Linear Regression(MLR),the Gaussian Process Regression(GPR)and the Long Short-term Memory Networks and Fully Connected Layers(LSTM-FC)models are constructed relying on the above 19 factors.For three different kinds of test sets from 2010 to 2019,2011 to 2019 and 2010 to 2019,the root mean square errors(RMSEs)of MLR,GPR and LSTM-FC between prediction and observations fluctuate within the range of 1.05-2.45,1.00-1.93 and 0.71-0.95 as well as the average absolute errors(AAEs)0.88-1.0,0.75-1.36 and 0.50-0.70,respectively.As for the 2010-2019 experiment,the mean deviations of the three model outputs from the observation are 0.89,0.78 and 0.56,together with the average evaluation scores 82.22,84.44 and 88.89,separately.The prediction skill comparisons unveil that LSTM-FC model has a better performance than MLR and GPR.In conclusion,the deep learning model of LSTM-FC may shed light on improving the accuracy of short-term climate prediction about TC frequency.The current research can provide experience on the development of deep learning in this field and help to achieve further progress of TC disaster prevention and mitigation in Guangdong Province.

Interference Mitigation Techniques Using Receiver Processing and Resource Allocation

Heterogeneous network consists of the pico cells overlaid over the macro cell coverage area in a wireless cellular network. The pico cells are deployed to increase the capacity of the homogeneous network by reusing the spectrum further. However, more users will tend to be associated to the macro cell due to the fact that the transmit power of the pico cell is low. In order to increase the number of users associated to the pico cell, range extension techniques like biased association are used. This will cause severe interference to cell edge users of the pico cell from the macro cell causing degradation in throughput performance in the cell range extension area. In this paper, interference mitigation using receiver processing along with different scheduling techniques is proposed to improve the throughput, average delay, and the packet delivery ratio performance of the system. The performance comparison of the round robin, proportional fair and modified largest weighted delay first (MLWDF) algorithm for resource allocation using interference suppressing receiver is done, and analyzed. It is shown that the MLWDF algorithm achieves the highest throughput with minimum average delay of packets with the best delivery ratio.

A NEW ESPRIT METHOD FOR BLIND ESTIMATES OF DOA-DOPPLER FREQUENCY WITH UNKNOWN ARRAY MANIFOLD

A novel rotational invariance technique for blind estimates of direction of arrival (I)OA) and Doppler frequency with unknown array manifold due to array sensor uncertainties is proposed, taking Doppler frequency difference between a successive pulses as rotational parameter. The effectiveness of the new method is confirmed by computer simulation. Compared with the existing 2-D DOA-frequeucy estimate techniques, the computation load of the proposed method can be saved greatly.

Features of Usage of Electromagnetic Field of Extremely Low Frequency for the Storage of Agricultural Products

The way of increase of storage period of agricultural raw materials under the influence of low frequency electromagnetic field (EMF LF) has been considered in the article. Existing developments of the EMF LF usage on the base of patents have been examined. The results of EMF LF processing of wood, wine, seeds, vegetative, fish and meat products have been presented.

Breast Lump Recognition Algorithms Based on Ultrasound Radio-Frequency Signals

A method for evaluating the benign and malignant breast tumors based on radio?frequency(RF)data was explored by extracting the characteristic parameters of breast ultrasound RF signals.The breast biopsy data were used as the reference data for judging the lump benign or malignant.The extracted ultrasound RF data were reconstructed and segmented by computer aided method to obtain the breast tumor region of interest(ROI)and its characteristic parameters(entropy and standard deviation).The characteristic parameters were statistically analyzed to evaluate the relationship between characteristic parameters and benign or malignant breast tumors.The results indicate the entropy and standard deviation of normal region is much higher than that of lump region,which shows that the standard deviation and entropy characteristic parameters of ultrasonic RF signals are meaningful in the diagnosis of breast tumors.The proposed method provides a new direction for computer?aided diagnosis of benign and malignant breast tumors.