Characterization of reservoir properties and pore structure based on micro-resistivity imaging logging: Porosity spectrum, permeability spectrum, and equivalent capillary pressure curve

According to the capillary theory,an equivalent capillary model of micro-resistivity imaging logging was built.On this basis,the theoretical models of porosity spectrum(Ф_(i)),permeability spectrum(K_(i))and equivalent capillary pressure curve(pe)were established to reflect the reservoir heterogeneity.To promote the application of the theoretical models,the Archie's equation was introduced to establish a general model for quantitatively characterizing bi,K,and pei.Compared with the existing models,it is shown that:(1)the existing porosity spectrum model is the same as the general equation of gi;(2)the Ki model can display the permeability spectrum as compared with Purcell's permeability model;(3)the per model is constructed on a theoretical basis and avoids the limitations of existing models that are built only based on the component of porosity spectrum,as compared with the empirical model of capillary pressure curve.The application in the Permian Maokou Formation of Well TsX in the Central Sichuan paleo-uplift shows that the Ф_(i),K_(i),and p_(ci) models can be effectively applied to the identification of reservoir types,calculation of reservoir properties and pore structure parameters,and evaluation of reservoir heterogeneity.

A new method to construct reservoir capillary pressure curves using NMR log data and its application

By analyzing hundreds of capillary pressure curves, the controlling factors of shape and type of capillary pressure curves are found and a novel method is presented to construct capillary pressure curves by using reservoir permeability and a synthesized index. The accuracy of this new method is verified by mercury-injection experiments. Considering the limited quantity of capillary pressure data, a new method is developed to extract the Swanson parameter from the NMR T2 distribution and estimate reservoir permeability. Integrating with NMR total porosity, reservoir capillary pressure curves can be constructed to evaluate reservoir pore structure in the intervals with NMR log data. An in-situ example of evaluating reservoir pore structure using the capillary pressure curves by this new method is presented. The result shows that it accurately detects the change in reservoir pore structure as a function of depth.

Stability and melting behavior of boron phosphide under high pressure

Boron phosphide(BP)has gained significant research attention due to its unique photoelectric and mechanical properties.In this work,we investigated the stability of BP under high pressure using x-ray diffraction and scanning electron microscope.The phase diagram of BP was explored in both B-rich and P-rich environments,revealing crucial insight into its behavior at 5.0 GPa.Additionally,we measured the melting curve of BP from 8.0 GPa to 15.0 GPa.Our findings indicate that the stability of BP under high pressure is improved within B-rich and P-rich environments.Furthermore,we report a remarkable observation of melting curve frustration at 10.0 GPa.This study will enhance our understanding of stability of BP under high pressure,shedding light on its potential application in semiconductor,thermal,and light-transmitting devices.

Development of a new irradiation-embrittlement prediction model for reactor pressure-vessel steels

Predicting the transition-temperature shift(TTS)induced by neutron irradiation in reactor pressure-vessel(RPV)steels is important for the evaluation and extension of nuclear power-plant lifetimes.Current prediction models may fail to properly describe the embrittlement trend curves of Chinese domestic RPV steels with relatively low Cu content.Based on the screened surveillance data of Chinese domestic and similar international RPV steels,we have developed a new fluencedependent model for predicting the irradiation-embrittlement trend.The fast neutron fluence(E>1 MeV)exhibited the highest correlation coefficient with the measured TTS data;thus,it is a crucial parameter in the prediction model.The chemical composition has little relevance to the TTS residual calculated by the fluence-dependent model.The results show that the newly developed model with a simple power-law functional form of the neutron fluence is suitable for predicting the irradiation-embrittlement trend of Chinese domestic RPVs,regardless of the effect of the chemical composition.

Regional plantar foot pressure distributions on high-heeled shoes-shank curve effects

Forefoot pain is common in high-heeled shoe wearers due to the high pressure caused by the center of body mass moving forward and the increased arch height with heel elevation.Sufficient arch support could reduce the high pressure over forefoot.However,too much arch support could lead to abnormal foot alignment and pain over midfoot.Little information is reported on the relationship among plantar arch height,shank curve design and plantar pressure.This study aimed at quantifying the plantar arch height changes at different heel heights and investigating the effect of shank curve on plantar pressure distribution.The plantar arch height increased to（7.6±1.3） mm at heel height of 75 mm.The Chinese standard suggests the depth of last should be 8.5 mm for heel height of 75 mm.When a shank curve with higher depth of last（11 mm） was used,the peak pressure over forefoot further decreased in midstance phase,which might ease the forefoot problems,while the peak pressure over midfoot increased but not exceeded the discomfort pressure thresholds.To achieve a more ideal pressure distribution in high-heeled shoes,a higher than expected depth of last would be suggested that would not cause discomfort over midfoot.

Effects of sample dimensions and shapes on measuring soil-water characteristic curves using pressure plate

It is well known that soilewater characteristic curve （SWCC） plays an important role in unsaturated soil mechanics, but the measurement of SWCC is inconvenient. In laboratory it requires days of testing time. For fine-grained clays, it may last for a couple of months using pressure plate tests. In this study, the effects of sample dimensions and shapes on the balance time of measuring SWCCs using pressure plate tests and the shape of SWCCs are investigated. It can be found that the sample dimensions and shapes have apparent influence on the balance time. The testing durations for circular samples with smaller diameters and annular samples with larger contact area are significantly shortened. However, there is little effect of sample dimensions and shapes on the shape of SWCCs. Its mechanism is explored and discussed in details through analysing the principle of pressure plate tests and microstructure of the sample. Based on the above findings, it is found that the circular samples with smaller dimensions can accelerate the testing duration of SWCC using the pressure plate.

Attenuation-type and failure-type curve models on accumulated pore water pressure in saturated normal consolidated clay

Based on dynamic triaxial test results of saturated soft clay, similarities of variations between accumulated pore water pressure and accumulated deformation were analyzed. The Parr＇s equation on accumulated deformation was modified to create an attenuation-type curve model on accumulated pore water pressure in saturated normal consolidation clay. In this model, dynamic strength was introduced and a new parameter called equivalent dynamic stress level was added. Besides, based on comparative analysis on variations between failure-type and attenuatiun-type curves, a failure-type curve model was created on accumulated pore water pressure in saturated normal consolidation clay. Two models can take cycle number, coupling of static and dynamic deviator stress, and consolidation way into consideration. The models are verified by test results. The correlation coefficients are more than 0.98 for optimization of test results based on the two models, and there is good agreement between the optimized and test curves, which shows that the two models are suitable to predict variations of accumulated pore water pressure under different loading cases and consolidation ways. In order to improve prediction accuracy, it is suggested that loading cases and consolidation ways should be consistent with in-situ conditions when dynamic triaxial tests are used to determine the constants in the models.

Experimental study on pressure fluctuation characteristics of slug flow in horizontal curved tubes

In order to study the pressure characteristics of slug flow in horizontal curved tubes,two kinds of curved tubes with central angle 45° and 90° respectively are studied,of which are with 0. 5m circumference and 26 mm inner diameter are used. When the superficial liquid velocity or the superficial gas velocity is constant,the pressure fluctuations and the probability distribution of the average velocity of slug flow are clear for all of the five experimental conditions. The results of experiment show that the pressure characteristics of slug flow in curved tubes have periodic fluctuations. With the rise of central angle,the period of pressure fluctuation is more obvious. The system pressure of the slug flow increases with the increasing of superficial liquid/gas velocity. Meanwhile,the probability distribution of pressure signal shows regularity,such as unimodal,bimodal or multimodal.

Shale high pressure isothermal adsorption curve and the production dynamic experiments of gas well

The high pressure static adsorption curves of shale samples from Silurian Changning-Weiyuan Longmaxi Formation were tested by using high pressure isothermal adsorption equipment.The physical modeling of depletion production was tested on single cores and multi-core series by using self-developed shale gas fluid-solid coupling experiment system.The adsorption and desorption laws were summarized and a high pressure isothermal adsorption model was established.The calculation formula of gas content was corrected,and the producing law of adsorption gas was determined.The study results show that the isothermal adsorption law of the shale reservoir under high pressure was different from the conventional low pressure.The high pressure isothermal adsorption curve had the maximum value in excess adsorption with pressure change,and the corresponding pressure was the critical desorption pressure.The high pressure isothermal curve can be used to evaluate the amount of adsorbed gas and the producing degree of adsorption gas.The high pressure isothermal adsorption model can fit and characterize the high pressure isothermal adsorption law of shale.The modified gas content calculation method can evaluate the gas content and the proportion of adsorbed gas more objectively,and is the theoretical basis of reserve assessment and production decline analysis.The producing degree of adsorption gas is closely related to the pressure,only when the reservoir pressure is lower than the critical desorption pressure,the adsorption gas can be produced effectively.In the process of gas well production,the pressure drop in the near-well area is large,the production of adsorption gas is high;away from the wellbore,the adsorption gas is low in production,or no production.

An analytical p-y curve method based on compressive soil pressure model in sand soil

With the high-quality development of urban buildings,higher requirements are come up with for lateral bearing capacity of laterally loaded piles.Consequently,a more accurate analysis to predict the lateral response of the pile within an allowable displacement is an important issue.However,the current p-y curve methods cannot fully take into account the pile-soil interaction,which will lead to a large calculation difference.In this paper,a new analytical p-y curve is established and a finite difference method for determining the lateral response of pile is proposed,which can consider the separation effect of pile-soil interface and the coefficient of circumferential friction resistance.In particular,an analytical expression is developed to determine the compressive soil pressure by dividing the compressive soil pressure into two parts:initial compressive soil pressure and increment of compressive soil pressure.In addition,the relationship between compressive soil pressure and horizontal displacement of the pile is established based on the reasonable assumption.The correctness of the proposed method is verified through four examples.Based on the verified method,a parametric analysis is also conducted to investigate the influences of factors on lateral response of the pile,including internal friction angle,pile length and elastic modulus of pile.

Fusion curves and thermodynamic properties of carbon tetrachloride,chloroform,bromoform and silicon tetrachloride at pressure up to 3500 MPa

The fusion temperature as a function of pressure for carbon tetrachloride, chloroform, bromoform and silicon tetrachloride at pressures up to 3500MPa has been determined. The experimental data were fitted by the equation Tfus=T0（1 ＋ Δp/a1）^a2 exp（-a3Δp） and the changes of the maolar enthalpy and molar internal energy on fusion were calculated using the parameters of the fitted equation. Comparisons with the data from the literature show that the experimental data, parameters of fitted equations, changes of the molar enthalpy and molar internal energy are reliable.

Pressure Buildup Analysis Using Type Curves for a Well in a Pressure-Maintained System

The development and application of a new solution is demonstrated for the type-curve analysis and in-terpretation of well test data from a multiwell reservoir system of both production and injection wells with two-phase flow. The buildup type curves or buildup behavior could be obtained through the solution by using su-perposition. But a new outer boundary condition for variable pressure boundary must be introduced to obtain the correct pressure buildup solutions by superposition. A technique is shown to determine the deviation time from the infinite-acting semilog radial flow stabilization in the derivatives of pressure, which is calculated with respect to and plotted vs. shut-in time. Field examples are given to illustrate the use of the proposed method for analyzing transient pressure data from a well located in a multi-well water-injection reservoir. An adaptive genetic algorithm-based method is used to match the pressure and pressure derivative data to estimate reservoir parameters. The validity and applicability of the proposed method are also demonstrated through the examples.

Biomagnetic Validation to Skin Level for Blood Pressure Curves and Venous

An analysis of the reproducibility from signal record bioelectric heart activity is presented. The measurements were carried out with a recently patented medical device, which one is able to record the curves of pressure arterial and venous as those obtained using the gold standard technique in these evaluations, the cardiac catheterization technique. The measurements were carried out 15 health subjects and patients;each one was measured 5 times in order to have auto-correlations and correlations of these records. Analysis indicates correlations from 0.9 to 1 as long as p values were below 0.05. It is indicated an excellent reproducibility of evaluated patients.

Determination of volumetric elastic moduli of plant leaf cells based on pressure-volume curves

Volumetric elastic modulus （VEM） is an important parameter in biophysics and biomechanics of plants for in particular understanding cell growth. This paper proposes a new relation that can be used for precisely determining VEM. With the aid of this relation, it shows that the exponential approximation of the pressure-volume relationship adopted in most of the literatures in this field may lead to serious errors on VEM.

DETERMINATION OF PRESSURIZING CURVE AND COMPUTER CONTROL OF THICKNESS THINNING FOR SUPERPLASTIC BULGING

This paper proposes the assumption that the flow with viscous friction is the stretch of part of the sheet that lies along the walls of a die during the process of superplastic bulging according to superplastic flow equation and geometrical model of bulging of a sheet into a long trapezoid groove or truncated cone, by introducing the friction-factor P which describes the friction effect on the process. Also, the paper proposes the method of controlling thickness nonuniformity and develops the equipment which for uniform thickness of bulging, is automatically controlled with a computerl it also analyzes the important innuence of lubrication on thickness distribution of bulging materials. By the assumption, the relationship between bulging pressure and time is obtained in bulging of a sheet into the groove and cone, and p-t curve of multi-mould-cavity complicated bulging is discussed based on the analysis of single-mould-cavity bulging characteristics.

Pump-stopping pressure drop model considering transient leak-off of fracture network

By introducing the coupling flow expressions of main fracture-matrix, secondary fracture-matrix and main fracture-secondary fracture into the traditional main fracture material balance equation, the “main fracture-secondary fracture-matrix” leak-off coupling flow model is established. The pressure-dependent fracture width equation and the wellbore injection volume equation are coupled to solve the pressure-rate continuity problem. The simulation and calculation of the bottomhole pressure drop and fracture network closure after the pump stopping in slickwater volumetric fracturing treatment are realized. The research results show that the log-log curve of pump-stopping bottomhole pressure drop derivative presents five characteristic slope segments, reflecting four dominant stages, i.e. inter-fracture crossflow, fracture network leak-off, fracture network closure and residual leak-off, after pump shutdown. At the initial time of pump shutdown for volumetric fracturing treatment of horizontal well, the crossflow between main and secondary fractures is obvious, and then the leak-off becomes dominant. The leak-off of main and secondary fractures shows a non-uniform decreasing trend. Specifically, the leak-off of main fractures is slow, while that of secondary fractures is fast;the fracture network as a whole presents the leak-off law of fast first, then slow, until close to zero. The influence of fracture network conductivity on the shape of pressure decline curve is relatively weaker than that of fracture network size. The fracture network conductivity is positively correlated with leak-off volume and fracture closure. The secondary fracture size is positively correlated with leakoff volume and closure of the secondary fracture, but negatively correlated with closure of the main fracture. Field data validation proves that the proposed model and simulation results can effectively reflect the closure characteristics of the fracture network, and the interpretation results are reliable and can reflect the non-uniform stimulation performance of each fracturing stage of an actual horizontal well.

CALCULATIONS OF THE PHASE EQUILIBRIA AND CRITICAL CURVES WITH THE EQUATION OF STATE FOR BINARY MIXTURES

A rational equation of state of the perturbation type with a repulsion and attraction term has been applied to reproduce critical curves of six different binary systems up to high temperatures and pressures. A square well potential for intermolecular interaction is used. With pairwise combination rules for these potentials three adjustable parameters are needed. The experimental critical point and phase equilibrium data are compared with the values predicted using the equation of state. Good agreement is obtained for the analysis of the critical pressure composition data and molar volumes.

Evalution of Application of p-y Curve Method in Offshore Engineering Foundation

Based on the Mohr-Coulomb failure principle and Rankine's theory, the laterally loaded pile ultimate resistance formulas of sand and soft clay proposed by Reese and Matlock respectively are discussed in this paper. The authors put forward the modified ultimate resistance formulas on the basis of which the ultimate resistance formula is developed for horizontally loaded pile in multi-layer soil in consideration of the effect of the overburden soil pressure on the calculation of soil layer. It is significant to the correct application of the ultimate resistance formulas in API and ZCS Rules into offshore engineering.

Influence of impulse waves generated by rocky landslides on the pressure exerted on bank slopes

Rocky landslides on river banks can result in the generation of ultra-high waves,which may destroy structures on the opposite bank.Existing methods to calculate the pressure on bank slopes under the effect of impulse waves generated by landslides are,however,few and of low precision.Therefore,in this study,a three-dimensional physical model test was conducted by taking into account factors such as landslide geometry parameters and the bank slope angle.The model test section was generalized on the basis of a certain section of the Three Gorges reservoir area as a prototype,after which the wave parameters and wave pressure acting on the bank slope were measured.Subsequently,the magnitude,acting point,and distribution of the pressure of the impulse waves generated by the rocky landslide upon the bank slope were determined.The distribution curve of the impact pressure was similar to that calculated using theСНиПⅡ57-75 formula,and the experimental pulsating pressure value was close to the value calculated using the Subgrade formula.Based on the test results,a power function of the relative pulsating pressure steepness with respect to the reciprocal of the wave steepness,relative water depth,and slope ratio was proposed.The acting point of the maximum pulsating pressure was found to be located near the still water level.Finally,an empirical formula for calculating the envelope of the maximum pulsating pressure distribution curve was proposed.These formulas can serve as a theoretical basis for the prediction of impulse wave pressure generated owing to landslides on bank slopes.

Cyclic moving average control approach to cylinder pressure and its experimental validation

Cyclic variability is a factor adversely affecting engine performance. In this paper a cyclic moving average regulation approach to cylinder pressure at top dead center （TDC） is proposed, where the ignition time is adopted as the control input. The dynamics from ignition time to the moving average index is described by ARMA model. With this model, a one-step ahead prediction-based minimum variance controller （MVC） is developed for regulation. The performance of the proposed controller is illustrated by experiments with a commercial car engine and experimental results show that the controller has a reliable effect on index regulation when the engine works under different fuel injection strategies, load changing and throttle opening disturbance.