Tuning magnetic damping constant in dedicated spintronic devices has important scientific and technological implications. Here we report on anisotropic damping in various compositional amorphous CoFeB films grown on G...Tuning magnetic damping constant in dedicated spintronic devices has important scientific and technological implications. Here we report on anisotropic damping in various compositional amorphous CoFeB films grown on GaAs(001) substrates. Measured by a vector network analyzer-ferromagnetic resonance (VNA-FMR) equipment, a giant magnetic damping anisotropy of 385%, i.e., the damping constant increases by about four times, is observed in a 10-nm-thick Co40Fe40B20 film when its magnetization rotates from easy axis to hard axis, accompanied by a large and pure in-plane uniaxial magnetic anisotropy (UMA) with its anisotropic field of about 450 Oe. The distinct damping anisotropy is mainly resulted from anisotropic two-magnon-scattering induced by the interface between the ferromagnetic layer and the substrate, which also generates a significant UMA in the film plane.展开更多
Dipole coupled nanomagnets controlled by the static Zeeman field can form various magnetic logic interconnects.However, the corner wire interconnect is often unreliable and error-prone at room temperature. In this stu...Dipole coupled nanomagnets controlled by the static Zeeman field can form various magnetic logic interconnects.However, the corner wire interconnect is often unreliable and error-prone at room temperature. In this study, we address this problem by making it into a reliable type with trapezoid-shaped nanomagnets, the shape anisotropy of which helps to offer the robustness. The building method of the proposed corner wire interconnect is discussed,and both its static and dynamic magnetization properties are investigated. Static micromagnetic simulation demonstrates that it can work correctly and reliably. Dynamic response results are reached by imposing an ac microwave field on the proposed corner wire. It is found that strong ferromagnetic resonance absorption appears at a low frequency. With the help of a very small ac field with the peak resonance frequency, the required static Zeeman field to switch the corner wire is significantly decreased by ~21 m T. This novel interconnect would pave the way for the realization of reliable and low power nanomagnetic logic circuits.展开更多
Amorphous Sm-Co films with uniaxial in-plane anisotropy have great potential for application in information-storage media and spintronic materials.The most effective method to produce uniaxial inplane anisotropy is to...Amorphous Sm-Co films with uniaxial in-plane anisotropy have great potential for application in information-storage media and spintronic materials.The most effective method to produce uniaxial inplane anisotropy is to apply an in-plane magnetic field during deposition.However,this method inevitably requires more complex equipment.Here,we report a new way to produce uniaxial in-plane anisotropy by growing amorphous Sm-Co films onto(011)-cut single-crystal substrates in the absence of an external magnetic field.The tunable anisotropy constant,kA,is demonstrated with variation in the lattice parameter of the substrates.A kA value as high as about 3.3×10^4J·m^-3 was obtained in the amorphous Sm-Co film grown on a LaAlO3(011)substrate.Detailed analysis indicated that the preferential seeding and growth of ferromagnetic(FM)domains caused by the anisotropic strain of the substrates,along with the formed Sm-Co,Co-Co directional pair ordering,exert a substantial effect.This work provides a new way to obtain in-plane anisotropy in amorphous Sm-Co films.展开更多
Permeability characteristics of sputtered soft magnetic Fe40Co40B20 thin films are investigated in the range of O. 5 to 5 GHz by a shortened microstrip transmission line perturbation method. Excellent microwave permea...Permeability characteristics of sputtered soft magnetic Fe40Co40B20 thin films are investigated in the range of O. 5 to 5 GHz by a shortened microstrip transmission line perturbation method. Excellent microwave permeability is achieved at 0.4 Pa argon pressure： fr is 3.32 GHz, the real and imaginary part of permeability at 0.5 GHz are 104 and 61, respectively. In addition, the thickness effect on permeability is also studied. The minimum damping can be achieved at the thinnest film. Different sources contributed to in-plane anisotropy are discussed briefly. The deviation between the peak frequency of the imaginary part and the zero-crossing frequency of the real part of permeability is also presented.展开更多
Large and variable in-plane uniaxial magnetic anisotropy in a nanocrystalline （Co2FeA1）97.8（Al2O3）2.2 soft magnetic thin film is obtained by an oblique sputtering method without being induced by magnetic field or ...Large and variable in-plane uniaxial magnetic anisotropy in a nanocrystalline （Co2FeA1）97.8（Al2O3）2.2 soft magnetic thin film is obtained by an oblique sputtering method without being induced by magnetic field or post anneaiing. The in-plane uniaxiai magnetic anisotropy varies from 50 Oe to 180 Oe （1 Oe=79.5775 A·m-1） by adjusting the sample＇s position. As a result, the ferromagnetic resonance frequency of the film increases from 1.9 GHz to 3.75 GHz.展开更多
An Si(001)/SiO2/Ti/Pt/Fe/Cu multilayer was prepared by direct-current magnetic sputtering system. The phase composition of the film was characterized by X-ray diffractometry(XRD), and the microstructure was observed b...An Si(001)/SiO2/Ti/Pt/Fe/Cu multilayer was prepared by direct-current magnetic sputtering system. The phase composition of the film was characterized by X-ray diffractometry(XRD), and the microstructure was observed by scanning electronic microscopy(SEM). Through the film annealed in magnetic field perpendicular to the surface of the film, FCC FePt film with (001) texture was obtained. And the density of the particle in the film annealed without magnetic field is very small compared with that in the film annealed with magnetic field. And the effect of magnetic field annealing on the microstructure of Fe/Pt film and the segregation of FCC FePt phase were also discussed.展开更多
Single-molecule magnets(SMMs),which can exhibit slow magnetization relaxation and bulk-magnet-like hysteresis of purely molecular origin,are promising candidates for high-density information storage,molecular spintron...Single-molecule magnets(SMMs),which can exhibit slow magnetization relaxation and bulk-magnet-like hysteresis of purely molecular origin,are promising candidates for high-density information storage,molecular spintronics,and quantum computing.To realize their applications,it is crucial to improve the blocking temperature(TB)and the effective relaxation barrier(Ueff).Three decades of multidisciplinary research have yielded distinct SMMs with a state-of-the-art Ueff of up to 2,000 K and a TB of up to the liquid nitrogen region.Several strategies have been investigated and summarized,which revealed that enhancing the uniaxiality of magnetic anisotropy is critical for constructing high-performance SMMs.Therefore,magnetic anisotropy,a key property that connects the molecular structure symmetry and performance of SMMs,plays a fundamental role in dictating magneto-structural correlations.Understanding and employing magnetic anisotropy would be significantly beneficial for rationally designing high-performance SMMs.This review focuses on the magnetic anisotropy of SMMs.We illustrate the origin and manifestation of magnetic anisotropy in mononuclear 3d-and 4f-block metal complexes.We then introduce developed approaches to investigate magnetic anisotropy both theoretically and experimentally.Typical SMMs by optimizing uniaxial magnetic anisotropy through lanthanide metallocene,symmetry controlling,and low-coordination approaches are represented.Furthermore,the remaining challenges and opportunities in this field will be discussed.展开更多
The magnetic anisotropy field in thin films with in-plane uniaxial anisotropy can be deduced from the VSM magnetization curves measured in magnetic fields of constant magnitudes. This offers a new possibility of apply...The magnetic anisotropy field in thin films with in-plane uniaxial anisotropy can be deduced from the VSM magnetization curves measured in magnetic fields of constant magnitudes. This offers a new possibility of applying rotational magnetization curves to determine the firstand second-order anisotropy constant in these films. In this paper we report a theoretical derivation of rotational magnetization curve in hexagonal crystal system with easy-plane anisotropy based on the principle of the minimum total energy. This model is applied to calculate and analyze the rotational magnetization process for magnetic spherical particles with hexagonal easy-plane anisotropy when rotating the external magnetic field in the basal plane. The theoretical calculations are consistent with Monte Carlo simulation results. It is found that to well reproduce experimental curves, the effect of coercive force on the magnetization reversal process should be fully considered when the intensity of the external field is much weaker than that of the anisotropy field. Our research proves that the rotational magnetization curve from VSM measurement provides an effective access to analyze the in-plane anisotropy constant K3 in hexagonal compounds, and the suitable experimental condition to measure K3 is met when the ratio of the magnitude of the external field to that of the anisotropy field is around 0.2.展开更多
Recently,significant experimental advancements in achieving topological phases have been reported in van der Waals(vdW)heterostructures involving graphene.Here,using first-principles calculations,we investigate graphe...Recently,significant experimental advancements in achieving topological phases have been reported in van der Waals(vdW)heterostructures involving graphene.Here,using first-principles calculations,we investigate graphene/CoBr_(2)(Gr/CoBr_(2))heterostructures and find that an enhancement of in-plane magnetic anisotropy(IMA)energy in monolayer CoBr_(2) can be accomplished by reducing the interlayer distance of the vdW heterostructures.In addition,we clarify that the enhancement of IMA energy primarily results from two factors:one is the weakness of the Co-d_(xy) and Co-d_(x^(2)-y^(2)) orbital hybridization and the other is the augmentation of the Co-d_(yz) and Co-d_(z)2 orbital hybridization.Meanwhile,calculation results suggest that the Kosterlitz–Thouless phase transition temperature(TKT)of a 2D XY magnet Gr/CoBr_(2)(23.8 K)is higher than that of a 2D XY monolayer CoBr_(2)(1.35 K).By decreasing the interlayer distances,the proximity effect is more pronounced and band splitting appears.Moreover,by taking into account spin–orbit coupling,a band gap of approximately 14.3 meV and the quantum anomalous Hall effect(QAHE)are attained by decreasing the interlayer distance by 1.0 A.Inspired by the above conclusions,we design a topological field transistor device model.Our results support that the vdW interlayer distance can be used to modulate the IMA energy and QAHE of materials,providing a pathway for the development of new low-power spintronic devices.展开更多
During the past two decades, a great deal of studies have been done in an attempt to improve the properties of the practically useful hard-magnetic material BaFe12O19 （BaM） by using the substitutional method. Unfort...During the past two decades, a great deal of studies have been done in an attempt to improve the properties of the practically useful hard-magnetic material BaFe12O19 （BaM） by using the substitutional method. Unfortunately, no remarkable progress about the basic magnetic properties has been made yet. One of the important aspects of these studies is the use of transition ions with strong anisotropy to replace the Fe3+ in BaM. The anisotropy ions reported are, for example, the first transition-metal ions Co2+[1], Fe2+[2] and the third transition-metal ions Ir4+[3] et al. The experiments show that all these anisotropy ions made a negative contribution to uniaxial anisotropy K1 at room temperature, i.e. ΔK1<0.展开更多
A series of Au/[NiCo/Bi]x/Au （x = 2, 3） films were fabricated by pulsed laser deposition method. In order to induce the in-plane uniaxial magnetic anisotropy （IPUMA） of the multifilms, multiple layers and differen...A series of Au/[NiCo/Bi]x/Au （x = 2, 3） films were fabricated by pulsed laser deposition method. In order to induce the in-plane uniaxial magnetic anisotropy （IPUMA） of the multifilms, multiple layers and different oblique angles ranging from 0° to 30° for the substrate are applied during the deposition. The microstructures of the nanofilms were investigated by using X-ray diffraction （XRD） and transmission electronic microscope （TEM）. And their magnetic properties were measured by an alternating gradient magnetometer. For the multicycle systems, using the method that with more periodic structures of NiCo/Bi film is easier for inducing IPUMA than the less or the samples located with various angles.展开更多
We review our works that focus on the microwave magnetic properties of metallic, ferrite and granular thin films. Soft magnetic material with large permeability and low energy loss in the GHz range is a challenge for ...We review our works that focus on the microwave magnetic properties of metallic, ferrite and granular thin films. Soft magnetic material with large permeability and low energy loss in the GHz range is a challenge for the inforcom technologies. GHz magnetic properties of the soft magnetic thin films with in-plane anisotropy were investigated. It is found that several hundreds of permeability at the GHz frequency was achieved for Col00_xZrx and Co90Nbl0 metallic thin films because of their high satu- ration magnetization, and an adjustable resonance frequency from 1.3 to 4.9 GHz was obtained. Compared with the metallic thin films, the weaker saturation magnetization of Ni-Zn ferrite thin films results in several tens of permeability at the GHz frequency, but the larger resistivity of the ferrite prepared in situ without any heating treatments has lower energy loss. In order to obtain materials with large permeability and low energy loss in the GHz range, the [CoFe-NiZn ferrite] composite granular thin films were investigated, where the advantage of higher saturation magnetization for the metallic alloy and the high resis- tivity as well as high saturation magnetization for the ferrite results in a good GHz magnetic performance.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFA0300803)the National Natural Science Foundation of China(Grant Nos.51971109,51771053,and 51471085)Scientific Research Foundation of Nanjing Institute of Technology(Grant Nos.ZKJ201708 and CKJB201708).
文摘Tuning magnetic damping constant in dedicated spintronic devices has important scientific and technological implications. Here we report on anisotropic damping in various compositional amorphous CoFeB films grown on GaAs(001) substrates. Measured by a vector network analyzer-ferromagnetic resonance (VNA-FMR) equipment, a giant magnetic damping anisotropy of 385%, i.e., the damping constant increases by about four times, is observed in a 10-nm-thick Co40Fe40B20 film when its magnetization rotates from easy axis to hard axis, accompanied by a large and pure in-plane uniaxial magnetic anisotropy (UMA) with its anisotropic field of about 450 Oe. The distinct damping anisotropy is mainly resulted from anisotropic two-magnon-scattering induced by the interface between the ferromagnetic layer and the substrate, which also generates a significant UMA in the film plane.
基金Supported by the National Natural Science Foundation of China under Grant No 61302022
文摘Dipole coupled nanomagnets controlled by the static Zeeman field can form various magnetic logic interconnects.However, the corner wire interconnect is often unreliable and error-prone at room temperature. In this study, we address this problem by making it into a reliable type with trapezoid-shaped nanomagnets, the shape anisotropy of which helps to offer the robustness. The building method of the proposed corner wire interconnect is discussed,and both its static and dynamic magnetization properties are investigated. Static micromagnetic simulation demonstrates that it can work correctly and reliably. Dynamic response results are reached by imposing an ac microwave field on the proposed corner wire. It is found that strong ferromagnetic resonance absorption appears at a low frequency. With the help of a very small ac field with the peak resonance frequency, the required static Zeeman field to switch the corner wire is significantly decreased by ~21 m T. This novel interconnect would pave the way for the realization of reliable and low power nanomagnetic logic circuits.
基金supported by the National Key Research and Development Program of China(2017YFB0702702,2018YFA0305704,2016YFB700903,2017YFA0303601,and 2017YFA0206300)the National Natural Sciences Foundation of China(51531008,51771223,51590880,11674378,51971240,U1832219,and 11934016)+2 种基金the Inner Mongolia Science and Technology Major Project of China 2016the Strategic Priority Research Program(B)Key Programof the Chinese Academy of Sciences(CAS).
文摘Amorphous Sm-Co films with uniaxial in-plane anisotropy have great potential for application in information-storage media and spintronic materials.The most effective method to produce uniaxial inplane anisotropy is to apply an in-plane magnetic field during deposition.However,this method inevitably requires more complex equipment.Here,we report a new way to produce uniaxial in-plane anisotropy by growing amorphous Sm-Co films onto(011)-cut single-crystal substrates in the absence of an external magnetic field.The tunable anisotropy constant,kA,is demonstrated with variation in the lattice parameter of the substrates.A kA value as high as about 3.3×10^4J·m^-3 was obtained in the amorphous Sm-Co film grown on a LaAlO3(011)substrate.Detailed analysis indicated that the preferential seeding and growth of ferromagnetic(FM)domains caused by the anisotropic strain of the substrates,along with the formed Sm-Co,Co-Co directional pair ordering,exert a substantial effect.This work provides a new way to obtain in-plane anisotropy in amorphous Sm-Co films.
文摘Permeability characteristics of sputtered soft magnetic Fe40Co40B20 thin films are investigated in the range of O. 5 to 5 GHz by a shortened microstrip transmission line perturbation method. Excellent microwave permeability is achieved at 0.4 Pa argon pressure： fr is 3.32 GHz, the real and imaginary part of permeability at 0.5 GHz are 104 and 61, respectively. In addition, the thickness effect on permeability is also studied. The minimum damping can be achieved at the thinnest film. Different sources contributed to in-plane anisotropy are discussed briefly. The deviation between the peak frequency of the imaginary part and the zero-crossing frequency of the real part of permeability is also presented.
基金Project supported by the National Natural Science Foundation of China(Grant No.11074040)the Key Project of Shandong Provincial Department of Science and Technology,China(Grant No.ZR2012FZ006)the Fujian Provincial Science Foundation for Distinguished Young Scholars,China(Grant No.2010J06001)
文摘Large and variable in-plane uniaxial magnetic anisotropy in a nanocrystalline （Co2FeA1）97.8（Al2O3）2.2 soft magnetic thin film is obtained by an oblique sputtering method without being induced by magnetic field or post anneaiing. The in-plane uniaxiai magnetic anisotropy varies from 50 Oe to 180 Oe （1 Oe=79.5775 A·m-1） by adjusting the sample＇s position. As a result, the ferromagnetic resonance frequency of the film increases from 1.9 GHz to 3.75 GHz.
文摘An Si(001)/SiO2/Ti/Pt/Fe/Cu multilayer was prepared by direct-current magnetic sputtering system. The phase composition of the film was characterized by X-ray diffractometry(XRD), and the microstructure was observed by scanning electronic microscopy(SEM). Through the film annealed in magnetic field perpendicular to the surface of the film, FCC FePt film with (001) texture was obtained. And the density of the particle in the film annealed without magnetic field is very small compared with that in the film annealed with magnetic field. And the effect of magnetic field annealing on the microstructure of Fe/Pt film and the segregation of FCC FePt phase were also discussed.
基金supported by the National Natural Science Foundation of China(21971006,21801037,22101220)the National Key R&D Program of China(2018YFA0306003,2017YFA0206301,2017YFA0204903)the Fundamental Research Funds for the Central Universities(WUT:2021IVA073).
文摘Single-molecule magnets(SMMs),which can exhibit slow magnetization relaxation and bulk-magnet-like hysteresis of purely molecular origin,are promising candidates for high-density information storage,molecular spintronics,and quantum computing.To realize their applications,it is crucial to improve the blocking temperature(TB)and the effective relaxation barrier(Ueff).Three decades of multidisciplinary research have yielded distinct SMMs with a state-of-the-art Ueff of up to 2,000 K and a TB of up to the liquid nitrogen region.Several strategies have been investigated and summarized,which revealed that enhancing the uniaxiality of magnetic anisotropy is critical for constructing high-performance SMMs.Therefore,magnetic anisotropy,a key property that connects the molecular structure symmetry and performance of SMMs,plays a fundamental role in dictating magneto-structural correlations.Understanding and employing magnetic anisotropy would be significantly beneficial for rationally designing high-performance SMMs.This review focuses on the magnetic anisotropy of SMMs.We illustrate the origin and manifestation of magnetic anisotropy in mononuclear 3d-and 4f-block metal complexes.We then introduce developed approaches to investigate magnetic anisotropy both theoretically and experimentally.Typical SMMs by optimizing uniaxial magnetic anisotropy through lanthanide metallocene,symmetry controlling,and low-coordination approaches are represented.Furthermore,the remaining challenges and opportunities in this field will be discussed.
基金Supported by the National Natural Science Foundation of China (Grant Nos 90505007 and 10774061)
文摘The magnetic anisotropy field in thin films with in-plane uniaxial anisotropy can be deduced from the VSM magnetization curves measured in magnetic fields of constant magnitudes. This offers a new possibility of applying rotational magnetization curves to determine the firstand second-order anisotropy constant in these films. In this paper we report a theoretical derivation of rotational magnetization curve in hexagonal crystal system with easy-plane anisotropy based on the principle of the minimum total energy. This model is applied to calculate and analyze the rotational magnetization process for magnetic spherical particles with hexagonal easy-plane anisotropy when rotating the external magnetic field in the basal plane. The theoretical calculations are consistent with Monte Carlo simulation results. It is found that to well reproduce experimental curves, the effect of coercive force on the magnetization reversal process should be fully considered when the intensity of the external field is much weaker than that of the anisotropy field. Our research proves that the rotational magnetization curve from VSM measurement provides an effective access to analyze the in-plane anisotropy constant K3 in hexagonal compounds, and the suitable experimental condition to measure K3 is met when the ratio of the magnitude of the external field to that of the anisotropy field is around 0.2.
基金Project supported by the National Natural Science Foundation of China(Grant No.52173283)Taishan Scholar Program of Shandong Province(Grant No.ts20190939)Independent Cultivation Program of Innovation Team of Jinan City(Grant No.2021GXRC043).
文摘Recently,significant experimental advancements in achieving topological phases have been reported in van der Waals(vdW)heterostructures involving graphene.Here,using first-principles calculations,we investigate graphene/CoBr_(2)(Gr/CoBr_(2))heterostructures and find that an enhancement of in-plane magnetic anisotropy(IMA)energy in monolayer CoBr_(2) can be accomplished by reducing the interlayer distance of the vdW heterostructures.In addition,we clarify that the enhancement of IMA energy primarily results from two factors:one is the weakness of the Co-d_(xy) and Co-d_(x^(2)-y^(2)) orbital hybridization and the other is the augmentation of the Co-d_(yz) and Co-d_(z)2 orbital hybridization.Meanwhile,calculation results suggest that the Kosterlitz–Thouless phase transition temperature(TKT)of a 2D XY magnet Gr/CoBr_(2)(23.8 K)is higher than that of a 2D XY monolayer CoBr_(2)(1.35 K).By decreasing the interlayer distances,the proximity effect is more pronounced and band splitting appears.Moreover,by taking into account spin–orbit coupling,a band gap of approximately 14.3 meV and the quantum anomalous Hall effect(QAHE)are attained by decreasing the interlayer distance by 1.0 A.Inspired by the above conclusions,we design a topological field transistor device model.Our results support that the vdW interlayer distance can be used to modulate the IMA energy and QAHE of materials,providing a pathway for the development of new low-power spintronic devices.
文摘During the past two decades, a great deal of studies have been done in an attempt to improve the properties of the practically useful hard-magnetic material BaFe12O19 （BaM） by using the substitutional method. Unfortunately, no remarkable progress about the basic magnetic properties has been made yet. One of the important aspects of these studies is the use of transition ions with strong anisotropy to replace the Fe3+ in BaM. The anisotropy ions reported are, for example, the first transition-metal ions Co2+[1], Fe2+[2] and the third transition-metal ions Ir4+[3] et al. The experiments show that all these anisotropy ions made a negative contribution to uniaxial anisotropy K1 at room temperature, i.e. ΔK1<0.
基金financially supported by the National Basic Research Program of China(No.2010CB934602)the National Natural Science Foundation of China(No.51171007 and No.51271009)the Special Funding for Major Scientific Research Instrument and Equipment of NSFC(No.61227902)
文摘A series of Au/[NiCo/Bi]x/Au （x = 2, 3） films were fabricated by pulsed laser deposition method. In order to induce the in-plane uniaxial magnetic anisotropy （IPUMA） of the multifilms, multiple layers and different oblique angles ranging from 0° to 30° for the substrate are applied during the deposition. The microstructures of the nanofilms were investigated by using X-ray diffraction （XRD） and transmission electronic microscope （TEM）. And their magnetic properties were measured by an alternating gradient magnetometer. For the multicycle systems, using the method that with more periodic structures of NiCo/Bi film is easier for inducing IPUMA than the less or the samples located with various angles.
基金supported by the National Natural Science Foundation of China (Grant No. 11034004)National Science Fund for Distinguished Young Scholars (Grant No. 50925103)+1 种基金Key Grant Project of Chinese Ministry of Education (Grant No. 309027)the Fundamental Research Funds for the Central Universities (Grant No. lzujbky-2010-219)
文摘We review our works that focus on the microwave magnetic properties of metallic, ferrite and granular thin films. Soft magnetic material with large permeability and low energy loss in the GHz range is a challenge for the inforcom technologies. GHz magnetic properties of the soft magnetic thin films with in-plane anisotropy were investigated. It is found that several hundreds of permeability at the GHz frequency was achieved for Col00_xZrx and Co90Nbl0 metallic thin films because of their high satu- ration magnetization, and an adjustable resonance frequency from 1.3 to 4.9 GHz was obtained. Compared with the metallic thin films, the weaker saturation magnetization of Ni-Zn ferrite thin films results in several tens of permeability at the GHz frequency, but the larger resistivity of the ferrite prepared in situ without any heating treatments has lower energy loss. In order to obtain materials with large permeability and low energy loss in the GHz range, the [CoFe-NiZn ferrite] composite granular thin films were investigated, where the advantage of higher saturation magnetization for the metallic alloy and the high resis- tivity as well as high saturation magnetization for the ferrite results in a good GHz magnetic performance.
