Reinforcement Technology for Soft Soil Roadbed in the Widened Section of Expressway Expansion

This article examines the soft soil roadbed reinforcement technology for widened sections of highways in a specific project.It provides an overview of the project,the principles of soft soil roadbed reinforcement technology for wide sections,and its practical application.The analysis aims to offer guidance on applying soft soil roadbed wide section reinforcement technology and enhancing the overall quality of similar projects.

Investigation on welding procedures for in-service pipelines

Some research results are given in this paper about burnthrough and hydrogen cracking with a flowing chamber and a loop. Many factors including plate thickness, running rate, heat input and so forth have been studied. By experiments it can be found that occurrence of hydrogen cracking can be effectively reduced by properly increasing heat input and using the tempering bead technique.

Study on the microstructure and hardness of in-service welded joint of X70 pipeline steel

Hydrogen induced cracking （HIC） is one of the main problems of in-service welding onto active pipeline. Microstructure and hardness of welded joint have a vital effect on hydrogen induced cracking. The microstructure and hardness of welded joint of XTO pipeline steel were studied using simulation in-service welding device. The results show that the main microstructures of in-service welded seam are grain boundary ferrite , intracrystalline acicular ferrite , as well as small amount of widmanztatten structure. The main microstructures of coarse grain heat-affected zone （CGHAZ） are coarse granular bainite, lath ferrite and martensite. Metastable phases such as martensite and lath ferrite are found in CGHAZ because of the too quick cooling velocity a＇nd the hardness of the CGHAZ is high.

FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR

The special subject 'research on life prediction technology of important in-service pressure' mainly analyzes the failure mechanism of large-sized important and criticalin-service pressure vessels under the action of working medium and investigates safety assessmentand life prediction technology with a view to enhance the operation reliability of in-servicepressure vessels in China. Based on a series of accident investigation and test & measuringresearch, the cause of cracking of catalytic regenerator is analyzed and the in-line non-destructiveexamination method and failure prevention measures for the cracking of catalytic regenerator areproposed.

Influence of cooling conditions on X70 pipeline steel in-service welding HAZ

The chamber device was designed and set up to simulate the in-service welding. The results show ： the t8/5 , t8/3 and inner wall peak temperature Tp decrease with the cooling rate increases. The welding energy is carried off by flowing medium, the cooling rate increases, and many unbalanced microstructures such as granular bainite, martensite and M-A generate ; it worsens the properties of HAZ. Under air-cooling, the cooling rate is slow, the austenite grain grows obviously, the lath ferrite crosses the whole austenite, and it causes the hardness value is also big. The change of HAZ width is not obvious with the increase of cooling rate; and burn-through is not susceptible to the cooling rate. The quench microstructures increase and the hydrogen does not outflow from the HAZ easily when increase the cooling rate, so the susceptibility of hydrogen cracking increases.

Non-destructive Testing Robots （NDTBOTs） for In-Service Storage Tank Inspection

Petrochemical storage tanks are generally inspected when the tank is offline mostly to assess the extent of underside corrosion on the tank floor. Emptying, cleaning and opening a tank for inspection take many months and are very expensive. Inspection costs can be reduced significantly by inserting robots through manholes on the tank roof to pertbrm non-destructive testing （NDT）. The challenge is to develop robots that can operate safely in explosive and hazardous environments and measure the thickness of floor plates using ultrasound sensors. This paper reports on the development of a small and inexpensive prototype robot （NDTBOT） which is designed to be intrinsically safe for zone zero operation. The robot ＂hops＂ across the floor to make measurements, without any external moving parts. The paper describes the design, experimental testing of the NDTBOT and presents results of steel plate thickness measurements made under water.

Numerical simulation of mechanical properties of straight pipe and elbow during in-service welding

Elbows are the most vulnerable parts in pipeline network systems. The residual stress for in-service welding repair has significant impacts on the mechanical properties of straight pipes and elbows. In this paper,the thermal elastic-plastic finite element method is employed to investigate the mechanical field during the in-service welding. The prediction of residual stress and deformation in the straight pipe and elbow is performed based on the validation of the numerical models. And the effects of the curvature radius and defects on the elbow are investigated. The results show that the residual stress distribution is uneven along various directions after welding. And the mechanical properties of the elbow decrease when the curvature radius is small. Compared to the intact elbow,the residual stress of the elbow with defects concentrates in the defective area. The depth of defect is the main factors affecting the mechanical properties of the elbow. A systematic analysis of the mechanical properties of straight pipes and elbows is proposed to provide guidance to the in-service welding.

Numerical simulation of stress and deformation of in-service welding onto gas pipeline

SYSWELD was used to simulate in-service welding process of gas pipeline of X70 pipeline steel. Welding thermal cycle, stress and deformation of in-service welded joint were studied. The results show that peak temperature of coarse grain heat-affected zone （CGHAZ） of in-service welding onto gas pipeline is the same with routine welding, but ts/5, ts/3 and ts/1 decrease at certain degree. For the zone near welded seam, axial stress and hoop stress in the inner pipe wall are compressive stress when welding source passes through the cross-section that is studied, but residual axial stress and residual hoop stress after welded are all tensile stress. Transient deformation and residual deformation are all convex deformation compared with the original pipe diameter size. Deformation achieves maximum when welding thermal source passes through the cross-section that is studied and then decreases during the cooling process after welding.

Influence of pipe parameters and heat input on thermal cycle of in-service welding onto active gas pipeline

The software of SYSWELD was used to build model and simulate thermal cycle of in-service welding onto active gas pipeline. Influence of pipe diameter, wall thickness and heat input on thermal cycle was studied. The results show that t8/5 , t8/3 and peak temperature of inner surface decrease when wall thickness increases from 5 mm to 12 mm. But t8/1 will increases with the increase of wall thickness and will decrease after the wall thickness is larger than 7 mm. Pipe diameter has little influence on thermal cycle and that influence can be ignored when pipe diameter is greater than 273 mm. t8/5 , t8/3 , t8/1 and peak temperature of inner surface will increase with the increase of heat input.

Effect of In-Service Training Program on the Practice of Healthcare Workers toward Malaria Prevention and Treatment Guidelines during Pregnancy in Health Facilities in Jowhar District, Somalia

Malaria is generally considered a major public health problem in Somalia. Providing early diagnosis and effective treatment is the key element of malaria control strategies in malaria-endemic countries, including Somalia. This required to advocate and ensure health worker’s adherence to the national malaria guidelines at all levels of health care service. A well-designed in-service training program may improve the level of health worker’s adherence to national malaria treatment guidelines, although results have been inconsistent. This is an interventional health facility-based pre and post comparative study aimed to assess the effect of an in-service training program on the practice of healthcare workers toward malaria prevention and treatment guidelines, during in pregnancy in health facilities in Jowhar district, Middle Shabelle region of Somalia. The study was implemented in three phases: pre-intervention phase, intervention phase and post-intervention phase. The sample size consisted of (n = 150) health workers who were selected from ten public health facilities using proportional to size sampling;the data collection adopted in this research is composed of a structured interview questionnaire and observational checklist. Data was analyzed through the application of descriptive statistical analysis that includes frequency and percentage and the Chi-square (x2) test was used to test the associations among variables using SPSS software version 25. The study showed that the level of health workers’ awareness of the national malaria guidelines in the treatment and prevention of malaria in pregnancy was found to be good before the intervention 89 (59.3%) and this proportion increased to 150 (100%) post-intervention of the training program. A significance difference has been observed between health workers’ awareness and their adherence to the malarial guidelines at pre-test and post-test with a p-value 0.000. The proportion of health workers who attended previous training on national malaria guidelines in the treatment and prevention of malaria in pregnancy increased from 46 (30.7%) at the pre-test to 150 (100%) after the post-test. A significant difference was observed in the training status among different categories of health worker and their adherence to the guidelines during the pre- and post-intervention of the training program, with a p-value of 0.000. The result showed that health workers were adhering to the guidelines at the pre-test 33 (22%), this increased after the post-test to 87 (58%). The knowledge of the need to adhere led to an increase in the adherence rate after the training program intervention. The study reveals that inadequate awareness was most reason for the non-adherence in the majority of the health workers as indicated by 89 (59.3%) at the pre-test and 56 (37.3%) in the post-test. However, difference was not significant between the availability of anti-malaria drugs in the facilities and the health workers’ adherence to the guidelines p-value 0.355 at the pretest and p-value 0.258 at post-test. The study concluded that the in-service training program significantly improved health workers’ knowledge and practice to the national malaria guidelines in the treatment, and prevention of malaria in pregnancy. The researcher recommends that the national malaria control programme (NMCP) of the Federal Ministry of Health should provide continuous regular in-service training to frontline healthcare workers at (facility and Community-based) to upgrade their skills and knowledge towards the malaria guidelines, disseminate job aids to the health facilities and undertake regular monitoring to ensure effective implementation of the national malaria treatment guidelines in the treatment and prevention of malaria in pregnancy in achieving desired proper case-management practices of malaria in pregnancy at all levels of health care service.

Investigation and Analysis of Continuing Nursing Education Status and Needs of In-Service Nurses in Tibet

Objective: To investigate and analyze the current status of continuing nursing education (CNE) of in-service nurses in Tibet and their demand for continuing education. Methods: 663 active nurses in Tibet were taken as the research objects, and the self-developed questionnaire was used to investigate the current status and needs of CNE, and the correlation between the CNE needs of active nurses and their personal conditions was analyzed. Results: This study shows that 65.61% (435/663) of active nurses have not participated in any CNE, and 91.86% (609/663) of active nurses believe that they need to participate in CNE. The problems faced by active nurses in participating in CNE include funding restrictions, time limitation and ability limitation. Logistic stepwise regression analysis reveals that the age of active nurses and working years of nurses are negatively correlated with the funding restrictions for participating in CNE (P < 0.05). It is relatively more difficult for young nurses with less working experience to obtain funding for participating in CNE. Moreover, there is a negative correlation between age, educational level and the ability of nurses to participate in CNE (P < 0.05). Younger nurses with lower educational level are more difficult to participate in CNE due to personal ability. There is a positive correlation between the length of working experience and the time limitation faced to participate in CNE (P < 0.05). Senior nurses are too busy with their work to participate in CNE due to limited time. Conclusion: The problems faced by active nurses in Tibet in participating in CNE come from funding, time and ability. Young nurses with limited working experience cannot participate in CNE resulting from limited ability and funds;while senior nurses are mainly restricted by time. It is recommended that hospitals and nursing management in Tibet should solve these problems faced by nurses in participating in CNE by implementing a flexible scheduling system, and providing funding or implementing an incentive system, to enhance the confidence of active nurses in participating in CNE.

In-service Structural Health Monitoring of a Full-scale Composite Horizontal Tail

In-service structural health monitoring（SHM） technologies are critical for the utilization of composite aircraft structures. We developed a Lamb wave-based in-service SHM technology using built-in piezoelectric actuator/sensor networks to monitor delamination extension in a full-scale composite horizontal tail. The in-service SHM technology combine of damage rapid monitoring（DRM） stage and damage imaging diagnosis（DID） stage allows for real-time monitoring and long term tracking of the structural integrity of composite aircraft structures. DRM stage using spearman rank correlation coeffi cient was introduced to generate a damage index which can be used to monitor the trend of damage extension. The DID stage based on canonical correlation analysis aimed at intuitively highlighting structural damage regions in two-dimensional images. The DRM and DID stages were trialed by an in-service SHM experiment of CFRP T-joint. Finally, the detection capability of the in-service SHM technology was verified in the SHM experiment of a full-scale composite horizontal tail. Experimental results show that the rapid monitoring method effectively monitors the damage occurrence and extension tendency in real time; damage imaging diagnosis results are consistent with those from the failure model of the composite horizontal tail structure.

Design Strategies of Expressway Routes and Interchanges

Road traffic conditions can have an important impact on the economic development of various regions.Under the background of rapid social and economic development,more and more expressway construction projects are initiated in various regions,including both new expressways and expansion of old expressways,and interchange design plays an important role.Scientific and reasonable interchange design can not only realize energy saving and low carbon footprint,but also be people-oriented and promote regional economic development.Therefore,this paper mainly analyzes the highway route and its interchange design strategy for reference.

Expressway Route and Interchange Design

With the rapid development of the socio-economy and the growing demand for transportation,highways have become an indispensable and important part of the modern transportation network.The design of highway routes and interchanges is a key link in highway construction,which directly affects the efficiency,safety,and traffic smoothness of highways.Based on this,this article analyzes in detail the highway route design and the design of two common interchanges,in order to improve the highway route design and the quality and efficiency of highway construction.

Ecological Design of Expressway Based on the Perspective of Landscape Ecology

The construction and operation of expressways will also bring a series of environmental and ecological problems,such as land use conflicts,ecological damage,environmental pollution,etc.In order to solve such problems,it is necessary to strengthen the application of landscape ecology.From the perspective of landscape ecology,this paper first introduces the impact of expressways on the ecological environment,and then analyzes the principles of expressway ecological landscape design.Landscaping,ecological environment,customer satisfaction,and other aspects have all performed well,with an optimization rate of over 90%.Future expressway design can strengthen the application of landscape ecology.

Analysis and Research on Interchange and Expansion options of Expressway

China's road network consists of numerous older expressways experiencing high traffic volumes and severe congestion,necessitating urgent reconstruction and expansion efforts.This study discusses the reconstruction and expansion project of the Yinkun Expressway's Chongqing High-tech Zone to Rongchang District section,with a detailed exploration of the entire design process.Through a comprehensive analysis,the strengths and weaknesses of different plans are examined,so as to determine the optimal plan.The design chosen saves costs while effectively addressing traffic demands.Additionally,the study summarizes the valuable design insights gained from this interchange transformation,aiming to provide valuable reference for similar interchange projects in the future.

Reliability Design for Longitudinal Slope Length of Expressway

The significance and the strategies of applying the reliability design method of longitudinal slope length in expressway engineering were explored in this study.The objective is to offer insights that can be beneficial for designing longitudinal slope lengths in contemporary expressway projects,with a focus on enhancing their reliability and safety.

基于平纵组合的山区高速公路连续下坡路段行车安全评价方法

受制于地理和经济条件,山区高速公路在建设中不可避免会存在连续下坡路段,其中平纵组合路段对车辆稳定性和安全性提出了更高的要求。为分析山区高速公路连续下坡平纵组合路段的行车安全,利用西南山区高速公路数据,以80 km/h的设计速度,在连续下坡路段的不同位置、不同平纵组合工况构建了驾驶仿真实验。根据驾驶者的心理数据、车辆速度变化数据和横向偏移数据推出综合评价指标;将综合评价指标与平曲线半径和纵坡进行相关性分析;再通过累计频率图划分评价阈值;提出了基于平纵组合的连续下坡路段行车安全评价方法,并依托评价方法提出了连续下坡路段坡顶、坡中和坡底位置的平纵组合设计建议值;并以西南山区某高速公路为例对该评价方法进行了应用与验证。研究结果表明:该方法能为高速公路连续下坡路段的行车安全评价提供有效的参考依据。

基于实车路试的高速公路减速标线运行效果研究

为探寻高速公路减速标线设置对小客车的纵向运行特性的影响,明确减速标线的减速效果,以G50沪渝高速重庆段的3处减速标线区段为对象,开展了实车驾驶试验,采集了自然驾驶状态下的车辆速度、加速度和轨迹等数据,对比分析了车辆经过3处减速标线区段时的速度整体特征、幅值分布和变化模式;同时分析了纵向减速度变化特征;根据速度与加速度的组合示意图和纵向减速标线设置区段内速度的最大降幅、起止点的速度差异性,评价了减速标线的实施效果。结果表明:由于道路线形条件不同,3处减速标线区段的车辆行驶速度整体特征和变化模式存在差异,其中弯坡组合路段车辆速度存在波动,分为“近匀速—减速—加速—稳定—加速”的五阶段变化模式;减速度中位值和85%位值分别为0.123 m/s^(2)、0.225 m/s^(2)、0.185 m/s^(2)和0.346 m/s^(2)、0.513 m/s^(2)、0.489 m/s^(2)。减速标线主要有两方面作用效果:能够使车辆运行车速显著降低,或能够抑制车辆速度增加的趋势。研究成果为高速公路减速标线有效性评价及安全改善提供了基础数据支持。

支盘桩加固既有填砂路基深层软土的模型试验研究

高速公路改扩建中既有填砂路基深层软土加固时存在路面结构层和施工场地空间限制的问题。首先,提出使用单盘挤扩支盘桩方案进行地基处理,通过挤扩法成盘于桩顶,以期实现不破除路面结构层的情况下达到设置桩顶承台或托板的效果。其次,利用群桩地基物理模型试验模拟一个桩土单元体研究加固方案的承载过程,通过分析桩体、盘体和土体的力学及变形指标研究支盘桩加固既有填砂路堤的承载表现和土体变形特征,最后,考虑土体参数和桩体尺寸推导了既有填砂路基深层软土支盘桩加固方法的二维简化模型。研究结果表明,软土在恒载下桩体轴力和土压力随时间变化调整,原因在于软土的压缩性和砂土的散粒体属性;桩顶轴力总和与恒载大小近似线性正相关,同时支盘直径越大桩顶轴力总和越大、桩承荷载占比越高,试验发现支盘桩加固法的桩承荷载占比约70%。另外,利用所建二维简化模型进行参数分析发现填砂路基中的最小盘间净距与上覆荷载、填砂内摩擦角、深层软土强度指标和支盘桩几何参数相关。