Research progress and application of deep in-situ condition preserved coring and testing

With the depletion of shallow resources,the exploration of deep earth resources has become a global strategy.The study of the different patterns in the physical mechanical properties of rocks at different occurrence depths is the basis for exploring deep into the earth,with the core and premise being the acquisition and testing of deep in-situ core specimens.Based on the original idea of deep in-situ condition preserved coring(ICP-Coring)and testing,combined with theoretical modeling,numerical analysis,test platform development,indoor testing and engineering application,the principles and technologies of deep ICP-Coring are developed.This principle and technology consists of five parts:in-situ pressurepreserved coring(IPP-Coring),in-situ substance-preserved coring(ISP-Coring),in-situ temperaturepreserved coring(ITP-Coring),in-situ light-preserved coring(ILP-Coring),and in-situ moisturepreserved coring(IMP-Coring).The theory and technology of temperature and pressure reconstruction at different occurrence depths and in different environments are proposed,and prototype trial production was completed by following the principle of displacement and tests based on the in-situ reconstructed environment.The notable advances are as follows:(1)Deep in-situ coring system:A pressure-preserved controller with an ultimate bearing capacity greater than 140 MPa,highperformance(temperature-resistant,pressure-resistant,and low thermally conductive)temperaturepreserved materials,an active temperature control system,and high-barrier quality-preserved membrane materials were developed;a deep ICP-Coring capacity calibration platform was independently developed,a deep in-situ coring technology system was developed,and the acquisition of deep in-situ cores was realized.(2)In-situ storage displacement system:Following the dual-circuit hydraulic design idea,a single-drive source push-pull composite grabbing mechanism was designed;the design of the overall structure for the deep in-situ displacement storage system and ultrahigh pressure cabin structure was completed,which could realize docking the coring device and core displacement in the in-situ reconstructed environment.(3)Test analysis system:A noncontact acoustic-electric-magnetic test system was developed under the in-situ reconstructed environment,and the errors between the test results and traditional contact test results were mostly less than 10%;a detachable deep in-situ core true triaxial test system was developed,which could perform loading tests for deep in-situ cores.The relevant technological achievements were successfully applied to the exploration and development of deep resources,such as deep mines,deep-sea natural gas hydrates,and deep oil and gas.The research results provide technical and equipment support for the construction of a theoretical system for deep in-situ rock mechanics,the development of deep earth resources and energy,and the scientific exploration of different layers and occurrence depths(deep and ultradeep)of the Earth.

Research on in-situ condition preserved coring and testing systems

As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ environmental conditions,leading to distortion of the measured parameters.Herein,a coring and testing systems retaining in-situ geological conditions is presented:the coring system that obtains in-situ rock samples,and the transfer and testing system that stores and analyzes the rocks under a reconstructed environment.The ICP-Coring system mainly consists of the pressure controller,active insulated core reactor and insulation layer and sealing film.The ultimate bearing strength of 100 MPa for pressurepreservation,temperature control accuracy of 0.97%for temperature-retained are realized.CH_(4)and CO permeability of the optimized sealing film are as low as 3.85 and 0.33 ppm/min.The average tensile elongation of the film is 152.4%and the light transmittance is reduced to 0%.Additionally,the pressure and steady-state temperature accuracy for reconstructing the in-situ environment of transfer and storage system up to 1%and±0.2 is achieved.The error recorded of the noncontact sensor ring made of lowdensity polymer is less than 6%than that of the contact test.The system can provide technical support for the deep in-situ rock mechanics research,improving deep resource acquisition capabilities and further clarifying deep-earth processes.

Temperature-controlled triaxial compression/creep test device for thermodynamic properties of soft sedimentary rock and corresponding theoretical prediction

In deep geological disposal of high-level nuclear waste,one of the most important subjects is to estimate long-term stability and strength of host rock under high temperature conditions caused by radioactive decay of the waste.In this paper,some experimental researches on the thermo-mechanical characteristics of soft sedimentary rock have been presented.For this reason,a new temperature-controlled triaxial compression and creep test device,operated automatically by a computer-controlled system,whose control software has been developed by the authors,was developed to conduct the thermo-mechanical tests in different thermal loading paths,including an isothermal path.The new device is proved to be able to conduct typical thermo-mechanical element tests for soft rock.The test device and the related testing method were introduced in detail.Finally,some test results have been simulated with a thermo-elasto-viscoplastic model that was also developed by the authors.

Triaxial creep tests of weak sandstone from fracture zone of high dam foundation

The lithology of fracture zone which was developed at the dam foundation of a hydropower station is weak sandstone with poor integrity and pore cementation contact.Its creep properties have a significant impact on the deformation and stability of the dam.Based on the characteristics of loose organizational structure,high moisture content and poor mechanical properties,the triaxial compression tests and creep tests were carried out,respectively.The results show significant non-linear,low strength and no obvious strength peaks.Both axial and lateral strains are achieved more than 3%when the tests are failed.The weak sandstone has a significant creep property,but only transient and steady state appear under low stress.Increased stress causes creep intensified and lateral strain gradually exceeds axial strain.In the failure stage,it has characteristics of large axial plastic deformation,obvious volumetric ductility dilation and large steady creep rate.The accelerated creep appears shortly after transient loading under confining of pressures 1.0 MPa and 1.5 MPa.Therefore,an improved Burgers creep model considering the non-linear characteristics of weak sandstone is built based on hyperbolic equation and the creep parameters are identified.This model can well describe the creep properties of weak sandstone.

In-Situ Test on Fatigue Characteristics of Top-Mounted Dividable Pile-Board Subgrade for High-Speed Railway

To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at different cross-sections of the pile-board structure for high-speed railway. The dynamic deformation, permanent deformation and dynamic stress of main reinforcements were measured. The test results show that the dynamic responses of the pile-board structure almost did not vary with the forced vibration times under the simulated trainload. After one million times of forced vibration, the permanent deformations of the midspan section of intermediate span and midspan section of side span were 0.7 mm and 0. 6 mm, respectively, and there was no accumulative plastic deformation at the bearing section of intermediate span.

Effects of temperature and wavelength choice on in-situ dissolution test of Cimetidine tablets

The effects of temperature and wavelength choice on in-situ dissolution test instrument of Cimetidine were studied. Absorbance （A）〈 1.0 is required when using a fiber-optic dissolution test system. The detection wavelength of 2 （218 nm） was replaced by 244 nm to carry out this test. The absorbance of Cimetidine solution at different temperature showed an obvious change. Calibration of Cimetidine solution should be tested at the same temperature （37° C） with the test solution. A suitable wavelength with smaller tangent slope could be chosen for in-situ dissolution test of Cimetidine tablets.

Creep properties and permeability evolution in triaxial rheological tests of hard rock in dam foundation

Triaxial creep tests were carried out under seepage pressure by using rock servo-controlled triaxial rheology testing equipment.Based on experimental results,rock rheological properties influenced by seepage-stress coupling were studied,and variations of seepage rate with time in complete creep processes of rock were analyzed.It is shown that,when the applied stress is less than failure stress level,the creep deformation is not obvious,and its main form is steady-state creep.When applied stress level is greater than or less than but close to fracture stress,it is easier to see the increase of creep deformation and the more obvious accelerative creep characteristics.The circumferential creep deformation is obviously higher than the axial creep deformation.At the stage of steady-state creep,the average of seepage flow rate is about 4.7×10-9 m/s at confining pressure(σ3) of 2 MPa,and is about 3.9×10-9 m/s at σ3 of 6 MPa.It is seen that the seepage flow rate at σ3 of 2 MPa in this case is obviously larger than that at σ3 of 6 MPa.At the stage of creep acceleration,the seepage flow rate is markedly increased with the increase of time.The variation of rock permeability is directly connected to the growth and evolution of creep crack.It is suggested that the permeability coefficient in complete creep processes of rock is not a constant,but is a function of rock creep strain,confining pressure,damage variable and pore water pressure.The results can be considered to provide a reliable reference for the establishment of rock rheological model and parameter identification.

Research of in-situ hydraulic test method by using double packer equipment

Double packer equipment for hydraulic test can be used to measure pressure of test zone directly, and it is frequently used to perform many kinds of hydraulic tests and take groundwater sample from borehole. The test method of this equipment mainly includes the test design, implementation, interpretation and synthetic analysis. By adopting the double packer equipment for hydraulic test, the parameter distribution of rock permeability along borehole can be acquired, as well as the connectivity, water conductivity and water bearing capacity of the disclosed structure and the chemical characteristics of the deep groundwater. It is a necessary method for the research and evaluation of the complex hypotonicity terrace site selection under geological conditions. This method is not only suitable for the geological disposal of high level radioactive waste, but also can be used in the site selection of underground facilities such as storage of petroleum and carbon dioxide. Meanwhile, it has a good application prospect in other hydrogeological investigation fields.

Computer Simulation of the Indentation Creep Tests on Particle-Reinforced Composites

A systematical simulation has been carried out on the indentation creep test on particle-reinforced composites. The deformation, failure mechanisms and life are analyzed by three reasonable models. The following five factors have been considered simultaneously: creep property of the particle, creep property of the matrix, the shape of the particle, the volume fraction of the particle and the size (relative size to the particle) of the indentation indenter. For all the cases, the power law respecting to the applied stress can be used to model the steady indentation creep depth rate of the indenter, and the detail expressions have been presented. The computer simulation precision is analyzed by the two-phase model and the three-phase model. Two places of the stress concentration are found in the composites. One is ahead of the indentation indenter, where the high stress state is deduced by the edge of the indenter and will decrease rapidly near to a steady value with the creep time. The other one is at the interface, where the high stress state is deduced by the misfit of material properties between the particles and matrix. It has been found that the creep dissipation energy density other than a stress parameter can be used to be the criterion to model the debonding of the interfaces. With the criterion of the critical creep dissipation energy density, a power law to the applied stress with negative exponent can be used to model the failure life deduced by the debonding of interfaces. The influences of the shape of the particles and the matching of creep properties of particle and matrix can be discussed for the failure. With a crack model, the further growth of interface crack is analyzed, and some important experimental phenomena can be predicted. The failure mechanism which the particle will be punched into matrix has been also discussed. The critical differences between the creep properties of the particles and matrix have been calculated, after a parameter has been defined. In the view of competition of failure mechanisms, the best matching of the creep properties of the two phases and the best shape of the particles are discussed for the composite design.

Aging Coefficient, Creep Coefficient and Extrapolating Aging Coefficient from Short Term Test for Sealed Concrete

Aging coefficient and creep coefficient are important parameters for creep analysis of any structure. With the aim to obtain those parameters, an experimental investigation is carried out on sealed concrete. Altogether ten specimens were tested, out of which four were for creep, two for shrinkage and remaining four for relaxation test. A year of relaxation test and two years of creep test results were analyzed to compute aging coefficient and creep coefficient. From regression analysis of observed and calculated aging coefficient using formula of Bazant and Kim, modification for aging coefficient is performed and extrapolation equations are generated. Instead of ACI model, B3 model has been used to obtain compliance function as the parameters of B3 model seems more relevant to creep mechanism of concrete compared to that of ACI model.

DETERMINATION OF CREEP PROPERTIES OF THERMAL BARRIER COATING(TBC)SYSTEMS FROM THE INDENTATION CREEP TESTING WITH ROUND FLAT INDENTERS

Indentation creep behavior with cylindrical flat indenters on the thermal barrier coating (TBC) was studied by finite element method (FEM). On ike constant applied indentation creep stress, there is a steady creep rate for each case studied for different creep properties of the TBC system. The steady creep depth rate depends on the applied indentation creep stress and size of the indenters as well as the creep properties of the bond coat of the TBC and the substrate. The possibilities to determine the creep properties of a thermal barrier system from indention creep testing were discussed. As an example, with two different size indenters, the creep properties of bond coat of the TBC system can be derived by an inverse FEM method. This study not only provides a numerical method to obtain the creep properties of the TBC system, but also extends the application of indentation creep method with cylindrical flat indenters.

Microstructural Evolution on the T91 Dissimilar Metal Joints during Creep Rupture Tests

T91 steel is one of the new materials presently employed in power plant pipe components. The creep rupture strength and microstructure of the T91+10CrMo910 and T91+13CrMo44 welded joints were analyzed during creep rupture tests. Creep transgranular ductile rupture occurred at the 10CrMo910 matrix in the T91+10CrMo910 welded joints and creep intergranular brittle rupture occurred at the 13CrMo44 HAZ in the T91+13CrMo44 joints. Microhardness measurements showed high hardness at the heat affected zone (HAZ) of T91 and a sharply drop at the 13CrMo44 HAZ during creep rupture. The metallographic tests showed that no obvious microstructure degradation was observed in the 10CrMo910 HAZ and matrix, while creep cracks appeared at the 13CrMo44 HAZ. T91 steel had relatively high creep resistant strength in the welded joints tested. Recovery occurred in the T91 HAZ with the growth of subgrain size and the decrease of dislocation density during creep. It was concluded that the dissimilar joints of T91 and low alloy heat-resistant steel should have close creep strength matching to increase the service life of the overall joints at elevated temperature.

Introduction of creep-rupture testing capability and proficiency at Baosteel

To characterize the long-term service performance and predict the lifetime of heat-resistant steel applications,more than 300 test pieces can be loaded simultaneously at Baosteel to determine the relationship between stress and rupture duration at specific temperatures. In addition, versatile testing methods have been established that evaluate creep-rupture, stress-relaxation, and creep-fatigue, as well as state-of-the-art tensile testing at hyper-high temperatures exceeding 2 100 ~2. Based on the Larson-Miller method, according to API 530, the accumulation of large volumes of data with respect to stress, temperature, and rupture time of actually tested steels ensures the reliability of predicting the allowable working stress over 100 000 h at any given temperature. For examples ,the stress tendencies against rupture time of T/P91 and T/P92 steel tubes, as obtained by Baosteel, are consistent with those from NIMS and ECCC. As an accredited provider of the Proficiency Testing schemes in ISO/ IEC 17025 and ISO/IEC 17043, Baosteel has periodically organized national proficiency testing with respect to creep and rupture, thereby providing an efficient way for all parties to assess their technical competence when performing uniaxial creep testing by the methods in ISO 204 and ASTM E139.

Design and feasibility analysis of a new completion monitoring technical scheme for natural gas hydrate production tests

As a prerequisite and a guarantee for safe and efficient natural gas hydrates(NGHs)exploitation,it is imperative to effectively determine the mechanical properties of NGHs reservoirs and clarify the law of the change in the mechanical properties with the dissociation of NGHs during NGHs production tests by depressurization.Based on the development of Japan’s two offshore NGHs production tests in vertical wells,this study innovatively proposed a new subsea communication technology-accurate directional connection using a wet-mate connector.This helps to overcome the technical barrier to the communication between the upper and lower completion of offshore wells.Using this new communication technology,this study explored and designed a mechanical monitoring scheme for lower completion(sand screens).This scheme can be used to monitor the tensile stress and radial compressive stress of sand screens caused by NGHs reservoirs in real time,thus promoting the technical development for the rapid assessment and real-time feedback of the in-situ mechanical response of NGHs reservoirs during offshore NGHs production tests by depressurization.

Rheological Characteristics of Gluten after Modified by DATEM, Ascorbic Acid, Urea and DTT Using Creep-Recovery Test

The effects of diacetyl tartaric acid ester of monoglycerides (DATEM), ascorbic acid (AA), urea, and dithiothreitol (DTT) on viscoelastic properties of commercial hard red winter wheat gluten were investigated. A constant shear stress of 40 Pa was applied to gluten during creep-recovery test. Experimental creep-recovery compliance responses were fitted into a Burgers model with four elements accounting for characteristics of pure elastic (spring), viscoelastic (spring-dashpots elements), and viscous flow (dashpot). DATEM decreased the elasticity and viscoelasticity, but increased viscosity of gluten. The addition of AA, urea, and DTT, resulted in opposite rheological properties when compared with DATEM. Relationship among physical properties was also studied with principal component analysis (PCA) including gluten viscoelasticity, dough mixing and baking properties. Regressed coefficients from Burgers model accounted for higher percent of explained variance and were independent from flour content, baking and dough mixing properties.

STUDY ON TESTING TECHNIQUE FOR MEASUREMENT OF FATIGUE－CREEP INTERACTION RESISTANCE

By using dropped stress creep method a new testing technique for measurement of the fa-tigue-creep interaction resistance is developed. At varied adjusted mean stresses the creep testingwas performed repeatedly When an unlimited extensive incubation period with zero creep rate oc-curred. the stress cavsing zero creep rate is defined as fatigue-creep resistance. The developped test-ing technique was used to measure the fatigue-creep resistance in F anc C regions. The dynamic ef-fective stress could yield a better descrption of fatigue and creep interaction. The fatigue-creep rateequations with varied exponents inF of C region are established. The different deformation mecha-nisms in F or C regions are indicated

粉砂质泥岩蠕变特性与非线性黏弹塑性本构模型

针对边坡、隧道工程中粉砂质泥岩长期稳定性问题,采用DZSZ-150型多场耦合岩石三轴压力试验机,利用粉砂质泥岩相似材料试样,开展不同围压下粉砂质泥岩蠕变试验。根据蠕变试验结果建立可描述粉砂质泥岩蠕变全过程的非线性黏弹塑性本构模型,以7 MPa围压下蠕变试验结果为例,对所提出的蠕变本构模型进行合理性和可行性验证。结果表明:试样的稳态蠕变速率与偏应力大小有关,随着偏应力的增加,试样稳态蠕变速率与偏应力之间符合指数函数关系;在加速蠕变阶段的蠕变速率相对低偏应力水平下减速蠕变和稳态蠕变速率明显要增大很多,且非常短时间内就发生了蠕变破坏;提出一种描述粉砂质泥岩全蠕变过程的非线性黏弹塑性本构模型,该模型能描述粉砂质泥岩蠕变-破坏全过程的蠕变变形规律,反映了粉砂质泥岩在不同偏应力水平作用下的蠕变特性,克服了经典模型中无法准确描述加速蠕变过程的难题。

高地应力-化学侵蚀耦合作用下炭质板岩蠕变试验及非线性蠕变损伤模型

为克服高程障碍并降低施工风险,可采用长大隧道穿越崇山峻岭,但这些隧道往往处于深埋高地应力环境,并受到化学侵蚀影响。为了解决此问题,以丽江—香格里拉炭质板岩大变形隧道为研究对象,采用室内试验和理论推导,研究深埋炭质板岩隧道受化学侵蚀作用下的围岩变形特性。在Poyting-Thomson体蠕变体的基础上,根据模型元件的力学特性,叠加了损伤元件、化学损伤元件和非线性元件,提出高地应力-化学侵蚀耦合作用下炭质板岩非线性蠕变损伤本构关系。研究结果表明:1)炭质板岩试样受化学侵蚀影响显著,侵蚀90 d试样所产生的轴向蠕变应变为侵蚀0 d试样的2.02倍,侵蚀60 d试样所产生的径向蠕变为侵蚀0 d试样的1.85倍;2)受侵蚀的炭质板岩试样在三轴压缩状态下破裂以斜向贯通裂隙为主,并产生一定的滑移错动裂隙,且沿轴线的拉伸劈裂破坏受围压作用抑制明显,未产生竖向贯通裂隙。

纤维加筋膨胀土的蠕变规律及模型预测

膨胀土是具有流变性质的灾害性土,其蠕变行为直接影响到工程结构的稳定性和安全性。为探究剑麻纤维加筋膨胀土的蠕变特性及应力-应变数学模型,采用室内固结排水三轴蠕变试验,分别进行了不同含水率、不同围压和不同偏应力条件下素膨胀土和剑麻纤维加筋膨胀土的蠕变特性研究,根据蠕变特征曲线提出了基于Mesri蠕变经验模型的剑麻纤维加筋膨胀土的修正蠕变模型。结果表明:相同条件下,剑麻纤维加筋土的蠕变变形量明显小于素土的蠕变变形量,说明掺入剑麻纤维可有效提高膨胀土的结构性能和抗变形能力;素土和剑麻纤维加筋土的蠕变变形量随含水率增大而增大,而随围压的增大呈减小趋势;素土和剑麻纤维加筋土在受到偏应力时均会产生瞬时应变量和蠕变变形量,其蠕变变形量随偏应力的增大而增大;素土和加筋土的蠕变曲线分4个阶段,分别为弹性变形阶段、稳态蠕变阶段、衰减蠕变阶段和加速蠕变阶段;高偏应力下,基于传统Mesri蠕变经验模型的剑麻纤维加筋土蠕变预测误差高达37.95%,对Mesri蠕变经验模型进行修正后预测误差降至1.5%内,说明修正模型能较好地描述剑麻纤维加筋土的蠕变特性。此研究结果可为膨胀土工程提供理论参考。

基于含冰量的冻结砂土-混凝土接触面蠕变特性

保证高含冰量冻土区桩基础的长期稳定性是多年冻土区桥梁桩基础安全服役中的关键问题,为研究含冰量对冻土-混凝土接触面蠕变特性的影响,采用自行研制的大型蠕变剪切仪,在−2℃条件下开展含冰量为6%、12%、16%、23%、36%、60%、80%的冻结砂土与混凝土接触面蠕变试验.试验结果表明:在恒定的剪应力作用下,除含冰量为6%试样出现加速蠕变外,其他试样仅出现衰减蠕变及稳定蠕变2个阶段;随含冰量的增大,试样黏性变形占比增大,含冰量为80%试样的黏性变形超过总变形量的80%;稳定蠕变速率受到干密度及含冰量的综合影响,含冰量为16%时稳定蠕变速率最小;Burgers黏弹性模型能较好地模拟高含冰量冻结砂土-混凝土接触面蠕变曲线;随着含冰量的增大,初始剪切模量和稳定蠕变阶段黏滞系数先增大后减小,初始蠕变阶段的渐进剪切模量呈幂函数减小,初始蠕变阶段黏滞系数呈幂函数增大.