Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide...Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide xerogel films was simulated with an equivalent circuit model, which was derived from the mechanism of electrode reactions. Measured electrochemical impedance spectra at various electrode potentials were analyzed by using the complex non-linear least-squares fitting method. The results show that impedance spectra consist of 2 high-to- medium frequency depressed arcs and a low frequency straight line. The high frequency arc is attributed to the absorption reaction of lithium ions into the oxide film, the medium frequency arc is attributed to the charge transfer reaction at the vanadium oxide/electrolyte interface and the low frequency is characterized by a straight line with a phase angle of 45° corresponding to the diffusion of lithium ion through vanadium oxide phase. The experimental and calculated results are compared and discussed focusing on the electrochemical performance and the state of charge of the electrode. Moreover, the high consistence of the fitted values of the model to the experimental data indicates that this mathematical model does give a satisfying description of the intercalation process of vanadium pentoxide xerogel films.展开更多
In order to investigate the anticorrosion performance of the organic coating/metal system, electrochemical impedance spectra （EIS） were measured in the 3.5wt% NaCl solution, the chemical component and the formation ...In order to investigate the anticorrosion performance of the organic coating/metal system, electrochemical impedance spectra （EIS） were measured in the 3.5wt% NaCl solution, the chemical component and the formation of corrosion products scale were analyzed by laser Raman microspectroscopy, and the pattern of the organic coating/metal system was observed by scanning electron microscopy （SEM）. The characteristics and the delamination process of the organic coating/metal system were investigated systematically, and the emphases were on the transportation of the corrosive medium and the changes of the coating/metal interface. The results show that the impedance decreases at the initial immersion, then increases at the middle-immersion, and again decreases at last, which is related to the corrosion products scale. The concentration of Cl in the coating, which destroys the corrosion products scale, increases with the immersion time.展开更多
Electrochemical impedance(EIS)and thin electrical resistance(ER)sensors were invented for atmospheric corrosion measurement of copper(Cu)during cyclic wetting−drying/high−low temperature tests and field exposure tests...Electrochemical impedance(EIS)and thin electrical resistance(ER)sensors were invented for atmospheric corrosion measurement of copper(Cu)during cyclic wetting−drying/high−low temperature tests and field exposure tests.Three-month field exposure results showed that average corrosion rate of Cu measured by ER sensor was well in accordance with that by weight loss method.During cyclic wetting−drying test,EIS was proven to reflect sensitively time of wetting and drying on the surface of sensor.Although corrosion rate obtained from EIS had a similar tendency to that obtained from ER sensors,the former was more dependent on environmental humidity than the latter.When relative humidity was low than 60%,corrosion rate of Cu measured by EIS was much lower than that by weight loss method,mainly attributing to the fact that impedance sensor failed to detect corrosion current of interlaced Cu electrodes due to the breakdown of conductive passage composed of absorbed thin liquid film under low humidity condition.Promisingly,ER sensor was proven to be more suitable for atmospheric corrosion monitoring than electrochemical techniques because it could sensitively monitor thickness loss of Cu foil according to the Ohmic law,no matter how dry or wet the sensor surface is.展开更多
The electrochemical behaviors of Ta in tetrabutylammonium hydrogen sulfate（TBAHS） ethanol solutions were studied using potentiodynamic polarization,cyclic voltammetry,potentiostatic current time transient and impeda...The electrochemical behaviors of Ta in tetrabutylammonium hydrogen sulfate（TBAHS） ethanol solutions were studied using potentiodynamic polarization,cyclic voltammetry,potentiostatic current time transient and impedance techniques.The results revealed that no active-passive transition is presented in the cyclic voltammogram,and the anodic current density increases with the increase of solution temperature,TBAHS concentration,potential scan rate and water content.The apparent activation energy is about 43.389 kJ/mol and the dissolution process is diffusion-controlled.Potentiostatic measurements showed that the current density gradually decays to a steady value when the potential is low;however,when the potential is higher than a certain value,the current density initially declines to a minimum value and then increases gradually.The resistance of passive film decreases with increasing potential,and inductive loops are presented when the potential is higher than 2.0 V.展开更多
The ion selectivity of electrodeposited nickel hexacyanoferrate （NiHCF） thin films was investigated using electrochemical impedance spectroscopy （EIS） and cyclic voltammetry （CV）. NiHCF thin films were prepared ...The ion selectivity of electrodeposited nickel hexacyanoferrate （NiHCF） thin films was investigated using electrochemical impedance spectroscopy （EIS） and cyclic voltammetry （CV）. NiHCF thin films were prepared by cathodic deposition on Pt and Al substrates. EIS and CV curves were determined in 1 mol/L （KNO3＋C5NO3） and 1 mol/L （NaNO3＋CsNO3） mixture solutions, which were sensitive to the concentration of Cs^＋ in the electrolytes. Experimental results show that all Nyquist impedance plots show depressed semicircles in the high-frequency range changing over into straight lines at lower frequencies. With increasing amounts of Cs^＋, the redox potentials in CV curves shift toward more positive values and the redox peaks broaden; the semicircle radius in corresponding EIS curves and the charge transfer resistance also increase. EIS combining CV is able to provide valuable insights into the ion selectivity of NiHCF thin films. 2008 University of Science and Technology Beijing. All rights reserved.展开更多
文摘Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide xerogel films was simulated with an equivalent circuit model, which was derived from the mechanism of electrode reactions. Measured electrochemical impedance spectra at various electrode potentials were analyzed by using the complex non-linear least-squares fitting method. The results show that impedance spectra consist of 2 high-to- medium frequency depressed arcs and a low frequency straight line. The high frequency arc is attributed to the absorption reaction of lithium ions into the oxide film, the medium frequency arc is attributed to the charge transfer reaction at the vanadium oxide/electrolyte interface and the low frequency is characterized by a straight line with a phase angle of 45° corresponding to the diffusion of lithium ion through vanadium oxide phase. The experimental and calculated results are compared and discussed focusing on the electrochemical performance and the state of charge of the electrode. Moreover, the high consistence of the fitted values of the model to the experimental data indicates that this mathematical model does give a satisfying description of the intercalation process of vanadium pentoxide xerogel films.
文摘In order to investigate the anticorrosion performance of the organic coating/metal system, electrochemical impedance spectra （EIS） were measured in the 3.5wt% NaCl solution, the chemical component and the formation of corrosion products scale were analyzed by laser Raman microspectroscopy, and the pattern of the organic coating/metal system was observed by scanning electron microscopy （SEM）. The characteristics and the delamination process of the organic coating/metal system were investigated systematically, and the emphases were on the transportation of the corrosive medium and the changes of the coating/metal interface. The results show that the impedance decreases at the initial immersion, then increases at the middle-immersion, and again decreases at last, which is related to the corrosion products scale. The concentration of Cl in the coating, which destroys the corrosion products scale, increases with the immersion time.
基金the National Natural Science Foundation of China(No.51771079)the China Postdoctoral Science Foundation(No.2020M682650).
文摘Electrochemical impedance(EIS)and thin electrical resistance(ER)sensors were invented for atmospheric corrosion measurement of copper(Cu)during cyclic wetting−drying/high−low temperature tests and field exposure tests.Three-month field exposure results showed that average corrosion rate of Cu measured by ER sensor was well in accordance with that by weight loss method.During cyclic wetting−drying test,EIS was proven to reflect sensitively time of wetting and drying on the surface of sensor.Although corrosion rate obtained from EIS had a similar tendency to that obtained from ER sensors,the former was more dependent on environmental humidity than the latter.When relative humidity was low than 60%,corrosion rate of Cu measured by EIS was much lower than that by weight loss method,mainly attributing to the fact that impedance sensor failed to detect corrosion current of interlaced Cu electrodes due to the breakdown of conductive passage composed of absorbed thin liquid film under low humidity condition.Promisingly,ER sensor was proven to be more suitable for atmospheric corrosion monitoring than electrochemical techniques because it could sensitively monitor thickness loss of Cu foil according to the Ohmic law,no matter how dry or wet the sensor surface is.
基金Project(2007AA03Z425)supported by the Hi-tech Research and Development Program of ChinaProject(50404011)supported by the National Natural Science Foundation of China
文摘The electrochemical behaviors of Ta in tetrabutylammonium hydrogen sulfate（TBAHS） ethanol solutions were studied using potentiodynamic polarization,cyclic voltammetry,potentiostatic current time transient and impedance techniques.The results revealed that no active-passive transition is presented in the cyclic voltammogram,and the anodic current density increases with the increase of solution temperature,TBAHS concentration,potential scan rate and water content.The apparent activation energy is about 43.389 kJ/mol and the dissolution process is diffusion-controlled.Potentiostatic measurements showed that the current density gradually decays to a steady value when the potential is low;however,when the potential is higher than a certain value,the current density initially declines to a minimum value and then increases gradually.The resistance of passive film decreases with increasing potential,and inductive loops are presented when the potential is higher than 2.0 V.
基金the National Natural Science Foundation of China(No.20676089)the Scholar Council Foundation of Shanxi Province,China(No.2004-24).
文摘The ion selectivity of electrodeposited nickel hexacyanoferrate （NiHCF） thin films was investigated using electrochemical impedance spectroscopy （EIS） and cyclic voltammetry （CV）. NiHCF thin films were prepared by cathodic deposition on Pt and Al substrates. EIS and CV curves were determined in 1 mol/L （KNO3＋C5NO3） and 1 mol/L （NaNO3＋CsNO3） mixture solutions, which were sensitive to the concentration of Cs^＋ in the electrolytes. Experimental results show that all Nyquist impedance plots show depressed semicircles in the high-frequency range changing over into straight lines at lower frequencies. With increasing amounts of Cs^＋, the redox potentials in CV curves shift toward more positive values and the redox peaks broaden; the semicircle radius in corresponding EIS curves and the charge transfer resistance also increase. EIS combining CV is able to provide valuable insights into the ion selectivity of NiHCF thin films. 2008 University of Science and Technology Beijing. All rights reserved.
