Probing the Nucleation and Growth Kinetics of Bismuth Nanoparticles via In-situ Transmission Electron Microscopy

The nucleation and growth mechanism of nanoparticles is an important theory,which can guide the preparation of nanomaterials.However,it is still lacking in direct observation on the details of the evolution of intermediate state structure during nucleation and growth.In this work,the evolution process of bismuth nanoparticles induced by electron beam was revealed by in-situ transmission electron microscopy(TEM)at atomic scale.The experimental results demonstrate that the size,stable surface and crystallographic defect have important influences on the growth of Bi nanoparticles.Two non-classical growth paths including single crystal growth and polycrystalline combined growth,as well as,corresponding layer-by-layer growth mechanism along{012}stable crystal plane of Bi nanoparticles with dodecahedron structure were revealed by in-situ TEM directly.These results provide important guidance and a new approach for in-depth understanding of the nucleation and growth kinetics of nanoparticles.

Sn nucleation and growth from Sn(II)dissolved in ethylene glycol:Electrochemical behavior and temperature effect

Thermodynamic and kinetic aspects of Sn nucleation and growth processes onto a glassy carbon electrode from SnCl2·2H2O dissolved in ethylene glycol solutions were studied.Typical reduction and oxidation peaks observed in voltammograms have demonstrated the capability of ethylene glycol solutions to electrodeposit Sn.The temperature-dependence of diffusion coefficient values derived from potentiodynamic and potentiostatic studies helped to determine and validate estimations of the activation energy for Sn(II)bulk diffusion.Chronoamperometric results have identified that,the suitable model to describe the early stage of Sn electrodeposition could be composed of Sn three-dimensional nucleation and diffusion-controlled growth and water reduction contributions,which was duly validated by theoretical and experimental approaches.From the model,typical kinetic parameters such as the nucleation frequency of Sn(A),number density of Sn nuclei(N_(0)),and diffusion coefficient of Sn(II)ions(D),were determined.The presence of Sn nuclei with excellent quality and their structures were verified using SEM,EDX,and XRD techniques.

Ribosome-inspired electrocatalysts inducing preferential nucleation and growth of three-dimensional lithium sulfide for high-performance lithium-sulfur batteries

Nucleation of lithium sulfide(Li_(2)S)induced by electrocatalysts plays a crucial role in mitigating the shut-tle effect.However,short-chain polysulfides on electrocatalysts surfaces tend to re-dissolve into elec-trolytes,delaying Li_(2)S supersaturation and its nucleation.In this study,we draw inspiration from the ribosome-driven protein synthesis process in cells to prepare ultrasmall nitrogen-doped MoS_(2) nanocrys-tals anchored on porous nitrogen-doped carbon networks(N-MoS_(2)-NC)electrocatalysts.Excitedly,the ex-situ SEM demonstrates that ribosome-inspired N-MoS_(2)-NC electrocatalysts induce early nucleation and rapid growth of three-dimensional Li_(2)s during discharge.Theoretical calculations reveal that the Li-s bond length in N-MoS_(2)-Li_(2)S(100)is shorter,and the corresponding interfacial formation energy is lower than in MoS_(2)-Li_(2)S(100).This accelerated conversion of lithium polysulfides to Li_(2)S can enhance the utilization of active substances and inhibit the shuttle effect.This study highlights the potential of ribosome-inspired N-MoS_(2)-NC in improving the electrochemical stability of Li-S batteries,providing valuable insights for future electrocatalyst design.

Nucleation and growth control for iron-and phosphorus-rich phases from a modified steelmaking waste slag

Recovering the iron(Fe)and phosphorus(P)contained in steelmaking slags not only reduces the environmental burden caused by the accumulated slag,but also is the way to develop a circular economy and achieve sustainable development in the steel industry.We had pre-viously found the possibility of recovering Fe and P resources,i.e.,magnetite(Fe_(3)O_(4)) and calcium phosphate(Ca_(10)P_(6)O_(25)),contained in steel-making slags by adjusting oxygen partial pressure and adding modifier B_(2)O_(3).As a fundamental study for efficiently recovering Fe and P from steelmaking slag,in this study,the crystallization behavior of the CaO-SiO_(2)-FeO-P_(2)O_(5)-B_(2)O_(3) melt has been observed in situ,using a confocal scanning laser microscope(CLSM).The kinetics of nucleation and growth of Fe-and P-rich phases have been calculated using a classical crys-tallization kinetic theory.During cooling,a Fe_(3)O_(4) phase with faceted morphology was observed as the 1st precipitated phase in the isothermal interval of 1300-1150℃,while Ca_(10)P_(6)O_(25),with rod-shaped morphology,was found to be the 2nd phase to precipitate in the interval of 1150-1000℃.The crystallization abilities of Fe_(3)O_(4) and Ca_(10)P_(6)O_(25) phases in the CaO-SiO_(2)-FeO-P_(2)O_(5)-B_(2)O_(3) melt were quantified with the in-dex of(T_(U)−T_(I))/T_(I)(where T_(I) represents the peak temperature of the nucleation rate and TU stands for that of growth rate),and the crystalliza-tion ability of Fe_(3)O_(4) was found to be larger than that of Ca_(10)P_(6)O_(25) phase.The range of crystallization temperature for Fe_(3)O_(4) and Ca_(10)P_(6)O_(25) phases was optimized subsequently.The Fe_(3)O_(4) and Ca_(10)P_(6)O_(25) phases are the potential sources for ferrous feedstock and phosphate fertilizer,respectively.

Nucleation and growth of eutectic cell in hypoeutectic Al-Si alloy

The nucleation and growth of eutectic cell in hypoeutectic Al-Si alloy was investigated using optical microscopy and scanning electron microscopy equipped with electron backscattering diffraction（EBSD）.By revealing the eutectic cells and analyzing the crystallographic orientation,it was found that both the eutectic Si and Al phases in an eutectic cell were not single crystal,representing an eutectic cell consisting of small ＇grains＇.It is also suggested that the eutectic nucleation mode can not be determined based on the crystallographic orientation between eutectic Al phases and the neighboring primary dendrite Al phases.However,the evolution of primary dendrite Al phases affects remarkably the following nucleation and growth of eutectic cell.The coarse flake-fine fibrous transition of eutectic Si morphology involved in impurity elements modification may be independent of eutectic nucleation.

Inner-pore reduction nucleation of palladium nanoparticles in highly conductive wurster-type covalent organic frameworks for efficient oxygen reduction electrocatalysis

Covalent organic frameworks(COFs)have emerged as a class of promising supports for electrocatalysis because of their advantages including good crystallinity,highly ordered pores,and structural diversity.However,their poor conductivity represents the main obstruction to their practical application.Here,we reported a novel synthesis strategy for synergistically endowing a triphenylamine-based COFs with improved electrical conductivity and excellent catalytic activity for oxygen reduction,via the in-situ redox deposition and confined growth of palladium nanoparticles inside the porous structure of COFs using reductive triphenylamine frameworks as reducing agent;meanwhile,the triphenylamine unit was oxidized to radical cation structure and affords radical cation COFs with conductivity as high as3.2*10^(-1) S m^(-1).Such a uniform confine palladium nanoparticle on highly conductive COFs makes it an efficient electrocatalyst for four-electron oxygen reduction reaction(4e-ORR),showing excellent activities and fast kinetics with a remarkable half-wave potential(E_(1/2))of 0.865 V and an ultralow Tafel slope of 39.7 mV dec^(-1) in alkaline media even in the absence of extra commercial conductive fillers.The generality of this strategy was proved by preparing the different metal and metal alloy nanoparticles supported on COFs(Au@COF,Pt@COF,AuPd@COF,AgPd@COF,and PtPd@COF)using reductive triphenylamine frameworks as reducing agent.This work not only provides a facile strategy for the fabrication of highly conductive COF supported ORR electrocatalysts,but also sheds new light on the practical application of Zn-air battery.

Crystal Nucleation and Growth of Al-based Alloys Produced by Electrolysis

The nucleation and growth of grains in a series of Al-based alloys produced by electrolysis are observed under SEM. The atomic Ti/AI ratios of the nuclei and the distribution of Ti at certain points are analyzed by point EDS. The particles in different atomic Ti/AI ratios might act as the nuclei of α-Al. At the early stage of growth, the spherical Ti-enriched regions might form around these particles within very limited temperature ranges in which the reactions such as the peritectic reactions etc occur. At the latter stage of growth, the dendrites freely develop in the radial orientations, and the concentration of Ti decreases linearly along the dendrite arm and becomes negligible in the region near the periphery of the dendrite. It is believed that the nucleation is closely related with the number and dispersion of primary spherical areas in the melts, and the segregation of Ti leads to the free growth of dendrite, which is necessary for the formation of equiaxial grains.

Nucleation and growth mechanism of electrodeposited Ni−W alloy

The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the electrodeposited Ni−W alloy.The nucleation type and kinetic parameters of the electrodeposited Ni−W alloy were obtained from the CA analysis results.SEM,AFM,and TEM were also used to investigate the nucleation and growth process of the electrodeposition of Ni−W alloy.The results demonstrate that the nucleation and initial stages of the growth phase of the Ni−W alloy undergo the formation,movement,and aggregation of atoms,single crystals,and nanoclusters.When the size of single crystal increases up to approximately 10 nm and the average size of the crystal granules is approximately 68 nm,they no longer grow.Increasing the applied potential increases the number of nuclei but does not affect the size of the final crystal granules.Therefore,the electrodeposited Ni−W alloy shows a nanocrystalline structure.

Nucleation and early stages of growth of lead onto copper electrodes from dilute electrolytes

The processes of nucleation and growth of lead from the dilute electrolytes on copper substrates were investigated bychronoamperometry and by scanning electron microscopic (SEM) analysis of the deposits obtained in the potentiostatic regime ofelectrolysis. In the dependence of electrodeposition conditions, the nucleation of Pb followed either progressive or instantaneoustype. The type of nucleation changed from progressive to instantaneous one with increasing the concentration of Pb(II) ions and theoverpotential of electrodeposition. Regardless of the type nucleation, a novel type of Pb particles like cobweb was formed by thepotentiostatic electrodeposition in the moment of nucleation and at the early stages of growth. On the basis of the shape ofcobweb-like particles and the electrodeposition conditions leading to their formation, these particles were situated in the group ofspongy-like ones. Also, comparative morphological analysis of Pb deposits obtained in the conditions of progressive andinstantaneous nucleation confirmed the existence of two limiting types of nucleation.

Application of the Method of Characteristics to Population Balance Models Considering Growth and Nucleation Phenomena

The population balance modeling is regarded as a universally accepted mathematical framework for dynamic simulation of various particulate processes, such as crystallization, granulation and polymerization. This article is concerned with the application of the method of characteristics (MOC) for solving population balance models describing batch crystallization process. The growth and nucleation are considered as dominant phenomena, while the breakage and aggregation are neglected. The numerical solutions of such PBEs require high order accuracy due to the occurrence of steep moving fronts and narrow peaks in the solutions. The MOC has been found to be a very effective technique for resolving sharp discontinuities. Different case studies are carried out to analyze the accuracy of proposed algorithm. For validation, the results of MOC are compared with the available analytical solutions and the results of finite volume schemes. The results of MOC were found to be in good agreement with analytical solutions and superior than those obtained by finite volume schemes.

Solute drag-controlled grain growth in magnesium investigated by quasi in-situ orientation mapping and level-set simulations

Critical properties of metallic materials,such as the yield stress,corrosion resistance and ductility depend on the microstructure and its grain size and size distribution.Solute atoms that favorably segregate to grain boundaries produce a pinning atmosphere that exerts a drag pressure on the boundary motion,which strongly affects the grain growth behavior during annealing.In the current work,the characteristics of grain growth in an annealed Mg-1 wt.%Mn-1 wt.%Nd magnesium alloy were investigated by advanced experimental and modeling techniques.Systematic quasi in-situ orientation mappings with a scanning electron microscope were performed to track the evolution of local and global microstructural characteristics as a function of annealing time.Solute segregation at targeted grain boundaries was measured using three-dimensional atom probe tomography.Level-set computer simulations were carried with different setups of driving forces to explore their contribution to the microstructure development with and without solute drag.The results showed that the favorable growth advantage for some grains leading to a transient stage of abnormal grain growth is controlled by several drivers with varying importance at different stages of annealing.For longer annealing times,residual dislocation density gradients between large and smaller grains are no longer important,which leads to microstructure stability due to predominant solute drag.Local fluctuations in residual dislocation energy and solute concentration near grain boundaries cause different boundary segments to migrate at different rates,which affects the average growth rate of large grains and their evolved shape.

Guided lithium nucleation and growth on lithiophilic tin-decorated copper substrate

Lithium metal is the ultimate anode choice for high energy rechargeable lithium batteries owing to its ultra-high theoretical capacity,however,Li dendrites and low Coulombic efficiency(CE)caused by disordered Li plating restrict its practical application.Herein,we develop an ultrathin Sn-decorated Cu substrate(Sn@Cu)fabricated by an electroless plating method to induce ordered Li nucleation and growth behavior.The lithiophilic Sn interfacial layer is found to play a critical role to lower the Li nucleation over-potential and promote fast Li-migration kinetics,and the underlying mechanism is revealed using the first principle calculations.Accordingly,a dense dendrite-free and Li deposition with large granular morphology is obtained,which significantly improved the CE and cycling performance of Li‖Sn@Cu half cells symmetric cells.Symmetric cells using the Li-Sn@Cu electrode display a much-prolonged life span(>1200 h)with low overpotential(~18 mV)at a high current density of 1 mA cm^(-2).Moreover,full cells paired with commercial LiFePO_(4) cathode(1.8 mAh cm^(-2))deliver enhanced cycling stability(0.5 C,300 cycles)and excellent rate performance.This work provides a simple and effective way to bring about high efficiency and long lifespan substrates for practical applications.

Molecular simulation studies on natural gas hydrates nucleation and growth:A review

How natural gas hydrates nucleate and grow is a crucial scientific question.The research on it will help solve practical problems encountered in hydrate accumulation,development,and utilization of hydrate related technology.Due to its limitations on both spatial and temporal dimensions,experiment cannot fully explain this issue on a micro-scale.With the development of computer technology,molecular simulation has been widely used in the study of hydrate formation because it can observe the nucleation and growth process of hydrates at the molecular level.This review will assess the recent progresses in molecular dynamics simulation of hydrate nucleation and growth,as well as the enlightening significance of these developments in hydrate applications.At the same time,combined with the problems encountered in recent hydrate trial mining and applications,some potential directions for molecular simulation in the research of hydrate nucleation and growth are proposed,and the future of molecular simulation research on hydrate nucleation and growth is prospected.

Electrodeposited PtNi nanoparticles towards oxygen reduction reaction:A study on nucleation and growth mechanism

In this work,highly monodispersed Pt-Ni alloy nanoparticles were directly deposited on carbon substrate through a facile electrodeposition strategy in the solvent system of N,N-dimethylformamide(DMF).A series of carbon supported Pt-Ni alloy electrocatalysts were synthesized under different applied electrode potentials.Among all as-obtained samples,the Pt-Ni/C electrocatalyst deposited at-1.73 V exhibits the optimal specific activity up to 1.850 mA cm^(-2)at 0.9 V vs.RHE,which is 6.85 times higher than that of the commercial Pt/C.Comprehensive physiochemical characterizations and computational evaluations via density functional theory were conducted to unveil the nucleation and growth mechanism of PtNi alloy formation.Compared to the aqueous solution,DMF solvent molecule must not be neglected in avoiding particle agglomeration and synthesis of monodispersed nanoparticles.During the alloy co-deposition process,Ni sites produced through the reduction of Ni(Ⅱ)precursor not only facilitates Pt-Ni alloy crystal nucleation but also in favor of further Pt reduction on the Ni-inserted Pt surface.As for the deposition potential,it adjusts the final particle size.This work provides a hopeful extended Pt-based catalyst layer production strategy for proton exchange membrane fuel cells and a new idea for the nucleation and growth mechanism exploration for electrodeposited Pt alloy.

Nucleation and growth of high purity aluminum grains in directional solidification bulk sample without electromagnetic stirring

A self-made directional solidification device was used to fabricate d 80 mm high purity aluminum ingots. SEM and AFM were used to detect the shape of grain boundaries. The orientation of the grain was studied by X-ray diffractometry. The results show that the nucleation points locate at the intersections of three adjacent grains. The lattice orientation of grains does not alter in the horizontal direction, but gradually approaches the optimum growth direction in the vertical direction during the growth process. All the grains suffer the competition and only the one whose orientation is closest to the preferred direction can occupy the final growth space.

Electrocrystallization nucleation and growth of NiFe alloys on brass substrate

The electrocrystalliztion nucleation and growth process of Ni-Fe alloy was studied using cyclic voltammetry and chronoamperometry. The results show that, in the case of high deposition overpotential, the nucleation/growth process of Ni-Fe binary alloy is 3-D instantaneous, and the growth rate of the previously formed nuclei increases with overpotential. However, at low overpotential, no distinguished nucleation current can be observed.Meanwhile, the discrepancy between the experimental non-dimensional variables(I/Im)2 and those calculated from the theoretical model was elucidated in the light of the molecular orbital theorem.

TBAB hydrate formation and growth in a microdevice under static and dynamic conditions

The natural gas hydrate has become one of the most promising future green energy sources on the earth.The natural gas hydrates mostly exist in the sediments with porous structure, so a solid understanding of the hydrate formation and growth processes in the porous medium is of significance for the exploitation of natural gas hydrate. The micro-packed bed device is one of the efficient microfluidic devices in the engineering field, but it has been rarely used for the hydrate-based research. In this study, a transparent micro-packed bed device filled with glass beads was developed to mimic the porous condition of sediments, and used to in-situ visualize the hydrate formation and growth habits in the pore spaces under both static and dynamic conditions. For the static experiment, two types of hydrate growth patterns in porous medium were observed and identified in the micro-packed bed device, which were the graincoating growth and pore-filling growth. For the dynamic condition, the hydrate formation, growth,distribution habits and hydrate blockage phenomena in the pore spaces were in-situ visually captured.The impacts of flowrate and subcooling on the pressure variation of the micro-packed bed and the duration of the hydrate growth under dynamic flow condition in pores were in-situ monitored and analyzed. The higher flowrate could result in the faster hydrate growth and more severe blockage in pores, but the effect of subcooling condition might be less significant at the high flowrate.

An in-situ study of static recrystallization in Mg using high temperature EBSD

It has been a common method to improve the mechanical properties of metals by manipulating their microstructures via static recrystallization,i.e.,through heat treatment.Therefore,the knowledge of recrystallization and grain growth is critical to the success of the technique.In the present work,by using in-situ high temperature EBSD,the mechanisms that control recrystallization and grain growth of an extruded pure Mg were studied.The experimental results revealed that the grains of priority for dynamic recrystallization exhibit fading competitiveness under static recrystallization.It is also found that grain boundary movement or grain growth is likely to show an inverse energy gradient effect,i.e.,low energy grains tend to swallow or grow into high energy grains,and grain boundaries of close to 30°exhibit superior growth advantage to others.Another finding is that{10-12}tensile twin boundaries are sites of hardly observed for recrystallization,and are finally swallowed by adjacent recrystallized grains.The above findings may give comprehensive insights of static recrystallization and grain growth of Mg,and may guide the design of advanced materials processing in microstructural engineering.

TEM OBSERVATION OF NUCLEATION AND GROWTH OF BORIDE DURING BORONIZATION OF STEEL 20 AND INFLUENCE OF PRIOR DEFORMATION

The TEM observation on the single-side thinned specimens was made of the nucleation and growth of boride during boronization for steel 20 and the influence of prior room temperature deformation.The results of X-ray diffraction and electron probe microstructure analysis show that only Fe_2B formed in the surface layer of specimens at the beginning of boronization;the atomic concentration of B in the surface layer increased with the increase of deformation monotonously;and the segregation of B atoms in the dislocation cells hindered the recovery and recrystallization of the deformed structure of the matrix and accelerated the nucleation and growth of boride in the surface layer.

Crystal Growth and Nucleation in Glasses in the Lithium Silicate System

The crystal growth and nucleation in glasses in the lithium silicate system have been investigated. Phase separation in ultimately homogenized glasses of the lithium silicate system xLi2O·(100 ﹣ x)SiO2 (where x = 23.4, 26.0, 29.1, and 33.5 mol% Li2O) has been studied. The glasses of these compositions have been homogenized using the previously established special temperature-time conditions, which make it possible to provide a maximum dehydration and removal of bubbles from the glass melt. The parameters of nucleation and growth of phase separated in homogeneities and homogeneous crystal nucleation have been determined. The absolute values of the stationary nucleation rates Ist of lithium disilicate crystals in the 23.4Li2O·76.6SiO2, 26Li2O·74SiO2 and 29.1Li2O·70.9SiO2 glasses with the compositions lying in the metastable phase separation region have been compared with the corresponding rates Ist for the glass of the stoichiometric lithium disilicate composition 33.51Li2O·66.5SiO2. It has been found that the crystal growth rate has a tendency toward a monotonic increase with an increase in the temperature, whereas the dependences of the crystal growth rate on the time of low temperature heat treatment exhibit an oscillatory behavior with a monotonic decrease in the absolute value of oscillations. The character of crystallization in glasses with the compositions lying in the phase separation region of the Li2O-SiO2 system is compared with that in the glass of the stoichiometric lithium disilicate composition. The conclusion has been made that the phase separation weakly affects the nucleation parameters of the lithium disilicate and has a strong effect on the crystal growth.