Mechanism and reservoir simulation study of the autothermic pyrolysis in-situ conversion process for oil shale recovery

The autothermic pyrolysis in-situ conversion process (ATS) consumes latent heat of residual organic matter after kerogen pyrolysis by oxidation reaction, and it has the advantages of low development cost and exploitation of deep oil shale resources. However, the heating mechanism and the characteristic of different reaction zones are still unclear. In this study, an ATS numerical simulation model was proposed for the development of oil shale, which considers the pyrolysis of kerogen, high-temperature oxidation, and low-temperature oxidation. Based on the above model, the mechanism of the ATS was analyzed and the effects of preheating temperature, O_(2) content, and injection rate on recovery factor and energy efficiency were studied. The results showed that the ATS in the formation can be divided into five characteristic zones by evolution of the oil and O_(2) distribution, and the solid organic matter, including residue zone, autothermic zone, pyrolysis zone, preheating zone, and original zone. Energy efficiency was much higher for the ATS than for the high-temperature nitrogen injection in-situ conversion process (HNICP). There is a threshold value of the preheating temperature, the oil content, and the injection rate during the ATS, which is 400 °C, 0.18, and 1100 m3/day, respectively, in this study.

A high-performance biochar produced from bamboo pyrolysis with in-situ nitrogen doping and activation for adsorption of phenol and methylene blue

Nitrogen doping is a promising method for the preparation of functional carbon materials.In this study,a nitrogen-doped porous coral biochar was prepared by using bamboo as raw material,urea as nitrogen source,and KHCO3 as green activator through in-situ pyrolysis.The structure of the obtained biochar was characterized by various techniques including nitrogen adsorption and desorption,Raman spectroscopy,X-ray photoelectron spectrometer,and etc.The adsorption properties of nitrogen-doped biochar were evaluated with phenol and methylene blue probes.The results showed that the nitrogen source ratio had a significant effect on the evolution of pore structure of biochar.Low urea addition ratio was beneficial to the development of pore structures.The optimum specific surface area of nitrogen-doped biochar could be up to 1693 m^2·g^-1.Nitrogen doping can effectively improve the adsorption capacity of biochar to phenol and methylene blue.Biochar prepared at 973.15 K with low urea addition ratio exhibited the highest adsorption capacity for phenol and methylene blue,and the equilibrium adsorption capacity was 169.0 mg·g^-1 and 499.3 mg·g^-1,respectively.By comparing the adsorption capacity of various adsorbents in related fields,it is proved that the nitrogen-doped biochar prepared in this study has a good adsorption effect.

Development review and the prospect of oil shale in-situ catalysis conversion technology

As an unconventional resource, oil shale possesses abundant reserves and significant potential for industrial applications. The rational and efficient development of oil shale resources holds immense importance in reducing national energy demand. In-situ catalytic technology, characterized by its high efficiency, low pollution, and minimal energy consumption, represents a key direction for future oil shale development. This paper provides a comprehensive review of research progress in in-situ oil shale mining technology, oil shale pyrolysis catalysts, the pyrolysis mechanism of kerogen, and the compatibility of different heating processes and catalysts. Furthermore, the paper proposes future research directions and prospects for oil shale in-situ catalytic technology, including reservoir modification, highefficiency catalyst synthesis, injection processes, and high-efficiency heating technology. These insights serve as valuable technical references for the advancement of oil shale in-situ catalytic technology.

Reaction mechanism and kinetics of pressurized pyrolysis of Chinese oil shale in the presence of water

A study of reaction mechanisms and chemical kinetics of pressurized pyrolysis of Chinese Liushuhe oil shale in the presence of water were conducted using an autoclave for simulating and modeling in-situ underground thermal degradation.It was found that the oil shale was first pyrolyzed to form pyrobitumen,shale oil,shale gas and residue,then the pyrobitumen was further pyrolyzed to form more shale oil,shale gas,and residue.It means that there are two consecutive and parallel reactions.With increasing temperature,the pyrobitumen yield,as intermediate,first reached a maximum,then decreased to approximately zero.The kinetics results show that both these reactions are first order.The activation energy of pyrobitumen formation from oil shale is lower than that of shale oil formation from pyrobitumen.

Microstructure and Toughness of Seeded Hot-Pressed Si_3N_4 Ceramics

Densification, phase transformation and fracture toughness were studied in hot-pressed Si_3N_4 seeded by in-houseproduced large, elongated β-Si_3N_4 seeds. A mixture of Y_2O_3-Al_2O_3 was used as the sintering aid. Concentration ofseeds were varied from 0 to 6 wt pct and the sintering time at 1700℃ was varied from 1 to 4 h. Maximum fracturetoughness of 9.0 MPam^(1/2) was measured in samples containing 5 wt pct seeds, hot pressed at 1700℃ for 4 h.