The transportation sector is responsible for 25% of the total Carbon dioxide (CO2) emissions, whereas 60.6% of this sector represents small and medium passenger cars. However, as noted by the European Union Long-term ...The transportation sector is responsible for 25% of the total Carbon dioxide (CO2) emissions, whereas 60.6% of this sector represents small and medium passenger cars. However, as noted by the European Union Long-term strategy, there are two ways to reduce the amount of CO2 emissions in the transportation sector. The first way is characterized by creating more efficient vehicles. In contrast, the second way is characterized by changing the fuel used. The current study addressed the second way, changing the fuel type. The study examined the potential of battery electric vehicles (BEVs) as an alternative fuel type to reduce CO2 emissions in Hungarys transportation sector. The study used secondary data retrieved from Statista and stata.com to analyze the future trends of BEVs in Hungary. The results showed that the percentage of BEVs in Hungary in 2022 was 0.4% compared to the total number of registered passenger cars, which is 3.8 million. The simple exponential smoothing (SES) time series forecast revealed that the number of BEVs is expected to reach 84,192 in 2030, indicating a percentage increase of 2.21% in the next eight years. The study suggests that increasing the number of BEVs is necessary to address the negative impact of CO2 emissions on society. The Hungarian Ministry of Innovation and Technologys strategy to reduce the cost of BEVs may increase the percentage of BEVs by 10%, resulting in a potential average reduction of 76,957,600 g/km of CO2 compared to gasoline, diesel, hybrid electric vehicles (HEVs), and plug-in hybrid vehicles (PHEVs).展开更多
Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and ...Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and valence state were characterized by SEM, XRD, ICP and XPS, respectively. The experimental results show the active component Cu of the catalysts via in situ synthesis could significantly improve the selective catalytic reduction （SCR） activities of NOx and the optimal Cu content is in the range of 0.30%-0.40%（mass fraction）. No N 2 O is detected by gas chromatograph （GC） during the evaluation process, which implies that NOx is almost entirely converted to N2 over Cu-SAPO-34/cordierite catalyst. The conversion rate of NOx to N2 by NH3 over catalyst could almost be up to 100%in the temperature range of 300-670 ℃with a space velocity of 12000 h-1 and it is still more than 60% at 300-620 ℃ under 36000 h-1. The catalysts also show the good hydrothermal and chemical stability at the atmosphere with H 2 O.展开更多
To define the diffusion behavior of harmful exhaust substances from diesel vehicles and support safety risk assessments of underground coal mines,we performed a multi-species coupling calculation of the emission and d...To define the diffusion behavior of harmful exhaust substances from diesel vehicles and support safety risk assessments of underground coal mines,we performed a multi-species coupling calculation of the emission and diffusion of harmful substances from a trackless rubber-wheel diesel vehicle.A computational fluid dynamics(CFD)model of the diffusion of harmful emissions was hence established and verified.From the perspective of risk analysis,the diffusion behavior and distribution of hazardous substances emitted by the diesel vehicle were studied under 4 different conditions;moreover,we identified areas characterized by hazardous levels of emissions.When the vehicle idled upwind in the roadway,high-risk areas formed behind and to the right of the vehicle:particularly high concentrations of pollutants were measured near the rear floor of the vehicle and within 5 m behind the vehicle.When the vehicle idled downwind,high-risk areas formed in front of it:particularly high concentrations of pollutants were measured near the floor and within 5 m from the front of the vehicle.In the above cases,the driver would not breathe highly polluted air and would be relatively safe.When the vehicle idled into the chamber,however,high-risk areas formed on both sides of the vehicle and near the upper roof.Forward entry of the vehicle caused a greater increase in the concentration of pollutants in the chamber and in the driver’s breathing zone compared with reverse entry.展开更多
Diesel vehicles have caused serious environmental problems in China.Hence,the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in...Diesel vehicles have caused serious environmental problems in China.Hence,the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in the latest China VI standard.To fulfill this stringent legislation,two major technical routes,including the exhaust gas recirculation(EGR)and high-efficiency selective catalytic reduction(SCR)routes,have been developed for diesel engines.Moreover,complicated aftertreatment technologies have also been developed,including use of a diesel oxidation catalyst(DOC)for controlling carbon monoxide(CO)and hydrocarbon(HC)emissions,diesel particulate filter(DPF)for particle mass(PM)emission control,SCR for the control of NOx emission,and an ammonia slip catalyst(ASC)for the control of unreacted NH3.Due to the stringent requirements of the China VI standard,the aftertreatment system needs to be more deeply integrated with the engine system.In the future,aftertreatment technologies will need further upgrades to fulfill the requirements of the near-zero emission target for diesel vehicles.展开更多
文摘The transportation sector is responsible for 25% of the total Carbon dioxide (CO2) emissions, whereas 60.6% of this sector represents small and medium passenger cars. However, as noted by the European Union Long-term strategy, there are two ways to reduce the amount of CO2 emissions in the transportation sector. The first way is characterized by creating more efficient vehicles. In contrast, the second way is characterized by changing the fuel used. The current study addressed the second way, changing the fuel type. The study examined the potential of battery electric vehicles (BEVs) as an alternative fuel type to reduce CO2 emissions in Hungarys transportation sector. The study used secondary data retrieved from Statista and stata.com to analyze the future trends of BEVs in Hungary. The results showed that the percentage of BEVs in Hungary in 2022 was 0.4% compared to the total number of registered passenger cars, which is 3.8 million. The simple exponential smoothing (SES) time series forecast revealed that the number of BEVs is expected to reach 84,192 in 2030, indicating a percentage increase of 2.21% in the next eight years. The study suggests that increasing the number of BEVs is necessary to address the negative impact of CO2 emissions on society. The Hungarian Ministry of Innovation and Technologys strategy to reduce the cost of BEVs may increase the percentage of BEVs by 10%, resulting in a potential average reduction of 76,957,600 g/km of CO2 compared to gasoline, diesel, hybrid electric vehicles (HEVs), and plug-in hybrid vehicles (PHEVs).
基金Project(20906067)supported by the National Natural Science Foundation of ChinaProject(2011M500543)supported by the Postdoctoral Science Foundation of ChinaProject supported by the Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi
文摘Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and valence state were characterized by SEM, XRD, ICP and XPS, respectively. The experimental results show the active component Cu of the catalysts via in situ synthesis could significantly improve the selective catalytic reduction （SCR） activities of NOx and the optimal Cu content is in the range of 0.30%-0.40%（mass fraction）. No N 2 O is detected by gas chromatograph （GC） during the evaluation process, which implies that NOx is almost entirely converted to N2 over Cu-SAPO-34/cordierite catalyst. The conversion rate of NOx to N2 by NH3 over catalyst could almost be up to 100%in the temperature range of 300-670 ℃with a space velocity of 12000 h-1 and it is still more than 60% at 300-620 ℃ under 36000 h-1. The catalysts also show the good hydrothermal and chemical stability at the atmosphere with H 2 O.
基金supported by the National Natural Science Foundation of China(Nos.52174191 and 51874191)the National Key R&D Program of China(No.2017YFC0805201)+1 种基金Qingchuang Science and Technology Project of Shandong Province University(No.2020KJD002)Taishan Scholars Project Special Funding(No.TS20190935).
文摘To define the diffusion behavior of harmful exhaust substances from diesel vehicles and support safety risk assessments of underground coal mines,we performed a multi-species coupling calculation of the emission and diffusion of harmful substances from a trackless rubber-wheel diesel vehicle.A computational fluid dynamics(CFD)model of the diffusion of harmful emissions was hence established and verified.From the perspective of risk analysis,the diffusion behavior and distribution of hazardous substances emitted by the diesel vehicle were studied under 4 different conditions;moreover,we identified areas characterized by hazardous levels of emissions.When the vehicle idled upwind in the roadway,high-risk areas formed behind and to the right of the vehicle:particularly high concentrations of pollutants were measured near the rear floor of the vehicle and within 5 m behind the vehicle.When the vehicle idled downwind,high-risk areas formed in front of it:particularly high concentrations of pollutants were measured near the floor and within 5 m from the front of the vehicle.In the above cases,the driver would not breathe highly polluted air and would be relatively safe.When the vehicle idled into the chamber,however,high-risk areas formed on both sides of the vehicle and near the upper roof.Forward entry of the vehicle caused a greater increase in the concentration of pollutants in the chamber and in the driver’s breathing zone compared with reverse entry.
基金supported by the National Key R&D Program of China(No.2017YFC0211101)the Key Project of National Natural Science Foundation(No.21637005)+1 种基金the Cultivating Project of Strategic Priority Research Program of Chinese Academy of Sciences(No.XDPB1902)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA23010200)。
文摘Diesel vehicles have caused serious environmental problems in China.Hence,the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in the latest China VI standard.To fulfill this stringent legislation,two major technical routes,including the exhaust gas recirculation(EGR)and high-efficiency selective catalytic reduction(SCR)routes,have been developed for diesel engines.Moreover,complicated aftertreatment technologies have also been developed,including use of a diesel oxidation catalyst(DOC)for controlling carbon monoxide(CO)and hydrocarbon(HC)emissions,diesel particulate filter(DPF)for particle mass(PM)emission control,SCR for the control of NOx emission,and an ammonia slip catalyst(ASC)for the control of unreacted NH3.Due to the stringent requirements of the China VI standard,the aftertreatment system needs to be more deeply integrated with the engine system.In the future,aftertreatment technologies will need further upgrades to fulfill the requirements of the near-zero emission target for diesel vehicles.
