Investigation of a Pressure Sensor with Temperature Compensation Using Two Concentric Wheatstone-Bridge Circuits

This study presents a silicon-based pressure sensor with temperature compensation. The eight piezoresistors were designed on the polycrystalline silicon membrane and constructed by two concentric Wheatstone-bridge circuits to perform two sets of sensors. The sensor in the central circuit measures the membrane deflection caused by the combined effects of pressure and temperature, while the outer one measures only the deflection caused by the working temperature. From this arrangement, it is reliable and accurate to measure the pressure by comparing the output signals from the two concentric Wheatstone-bridge circuits. The optimal positions of the eight piezoresistors were simulated by simulation software ANSYS. The investigated pressure sensor was fabricated by the micro electro-mechanical systems (MEMS) techniques. The measuring performance and an indication of the conventional single Wheatstone-bridge pressure sensor is easily affected under variation of different working temperature and causes a maximum absolute error up to 45.5%, while the double Wheatstone-bridge pressure sensor is able to compensate the error, and reduces it down to 1.13%. The results in this paper demonstrate an effective temperature compensation performance, and have a great performance and stability in the pressure measuring system as well.

Temperature Compensation Algorithm for Hydraulic System Pressure Control

In this paper the control mechanism of solenoid valve is analyzed,which shows the solenoid valve control is actually the control of coil current.The response characteristic of coil current is related to coil inductance and resistance.The coil resistance is influenced greatly by the ambient temperature and the self-heating of coil,which affects the control precision of coil current.First,considering the heat dissipation mode of coil,the coil temperature model is established from the perspective of heat conduction,and a temperature compensation algorithm for hydraulic system pressure control is put forward.Then the hardware-in-the-loop testbed is set up by using the dSPACE platform,carrying out wheel cylinder pressurization tests with inlet valve fully opened at-40℃ and 20℃,and testing the actual pressure of wheel cylinder with the target pressures at-40℃ and 6 000 kPa/s(pressurization rate).The results show that the pressure control temperature compensation algorithm proposed in this paper accurately corrects the influence of resistance temperature drift on the response accuracy of wheel cylinder pressure.After the correction,the pressure difference is less than 500 kPa,which can meet the control accuracy requirements of solenoid valve,enriching the linear control characteristic of solenoid valve.

The dynamic compensation temperature in a kinetic spin-5/2 Ising model on a hexagonal lattice

We present a study of the dynamic behavior of a two-sublattice spin-5/2 Ising model with bilinear and crystal-field interactions in the presence of a time-dependent oscillating external magnetic field on alternating layers of a hexagonal lattice by using the Glauber-type stochastic dynamics.The lattice is formed by alternate layers of spins σ=5/2 and S=5/2.We employ the Glauber transition rates to construct the mean-field dynamic equations.First,we investigate the time variations of the average sublattice magnetizations to find the phases in the system and then the thermal behavior of the dynamic sublattice magnetizations to characterize the nature（first-or second-order） of the phase transitions and to obtain the dynamic phase transition（DPT） points.We also study the thermal behavior of the dynamic total magnetization to find the dynamic compensation temperature and to determine the type of the dynamic compensation behavior.We present the dynamic phase diagrams,including the dynamic compensation temperatures,in nine different planes.The phase diagrams contain seven different fundamental phases,thirteen different mixed phases,in which the binary and ternary combination of fundamental phases and the compensation temperature or the L-type behavior strongly depend on the interaction parameters.

Temperature compensation method for low cost three-axis MEMS digital angular rate gyroscopes

In recent years,a large number of small volume,low cost micro electro mechanical systems（MEMS）digital three-axis angular rate gyroscopes have been developed and widely used in civil and military fields.However,these kinds of gyroscopes have poor performances in initial zero-bias,temperature drift,In-Run bias stability,bias repeatability,etc.,their output errors need to be compensated before being used.Based on a lot of experiments,the temperature drift and the initial zero-bias are the major error sources in the MEMS gyroscopes output data.Due to the poor repeatability of temperature drift,the temperature compensation coefficients need to be recalculated every time before using.In order to recalculate parameters of the temperature compensation model quickly,a 1st-order polynomial model of temperature is established,then a forgetting factor recursive least squares estimator will be adopted to identify the model parameters in real time.Static and dynamic experimental data shows that this method removed/compensated the temperature drift and initial zero-bias from the output of the gyroscopes effectively.

Temperature Compensation for Double Fiber Bragg Grating Sensors

一种新奇双纤维布拉格栅栏(FBG ) 紧张传感器配置被介绍。温度赔偿方法基于两倍 FBG 在一个菱形框架上系在。Throughthe 理论分析，在在传感器上使用的布拉格波长和紧张的相对移动之间的关系被获得，并且紧张灵敏系数的分析表示也被给。实验结果显示出那：在 0 ～的紧张范围 0.8 公里，在布拉格波长和应用紧张的相对移动之间的关系是线性的，并且在 60 ℃是的 -25 ℃～的范围的两倍 FBG 波长的分散 0 ～ 0。002 nm。排水量传感器配置的紧张敏感是 0。171 nm/ με，并且将近两次比单个 FBGsensor 的。

Symmetric Temperature Compensation for Photoelectric Coupling Current Transducer

The temperature characteristic of sensor probe at high voltage side is analyzed by using a photoelectric coupling current transducer. The principle of symmetric temperature compensation and the main idea of software design are proposed. The method increases measuring precision and has fairly great practicability.

Reliability Design and Simulation of a Surface-Mount Temperature Compensation Crystal Oscillator

This paper introduces the structure and principle of a surface-mount high-precision temperature compensation crystal oscillator,and specifically describes the reliability design of a quartz-crystal resonator used inside the surface-mount temperature compensation crystal oscillator,the reliability design of surface-mount ceramic base and the reliability design of hybrid micro-assembly.Finally,the thermal and mechanical simulation results and the experimental verification of this surface-mount temperature compensation crystal oscillator are provided,which prove that this crystal oscillator has high reliability.

Trimmable bandgap reference circuit with exponential curvature compensation

This paper proposes an improved exponential curvature-compensated bandgap reference circuit to exploit the exponential relationship between the current gainβof the bipolar junction transistor(BJT)and the temperature as well as reduce the influence of resistance-temperature dependency.Considering the degraded circuit performance caused by the process deviation,the trimmable module of the temperature coefficient(TC)is introduced to improve the circuit stability.The circuit has the advantages of simple structure,high linear stability,high TC accuracy,and trimmable TC.It consumes an area of 0.09 mm^(2)when fabricated by using the 0.25-μm complementary metal-oxide-semiconductor(CMOS)process.The proposed circuit achieves the simulated power supply rejection(PSR)of about-78.7 dB@1 kHz,the measured TC of~4.7 ppm/℃over a wide temperature range from-55℃to 125℃with the 2.5-V single-supply voltage,and the tested line regulation of 0.10 mV/V.Such a high-performance bandgap reference circuit can be widely applied in high-precision and high-reliability electronic systems.

Novel Fiber Optic Temperature Sensor with Full Compensation Based on Optical Absorption

A novel system configuration of fiber optic sensor based on optical abso rption is proposed. Several compensation measures are discussed. A simulated exp eriment is designed and the output curve of system is given. The experiment al result shows that these compensation measures are effective on dynamic distu rbances which are caused by background light and optical fiber bend. In addition , the drifts in the light source intensity, fiber losses, and photodetector effi ciency are also compensated.

A New CMOS Current Reference with High Order Temperature Compensation

A new high order CMOS temperature compensated current reference is proposed in this paper, which is accomplished by two first order temperature compensation current references. The novel circuit exploits the temperature characteristics of integrated-circuit resistors and gate-source voltage of MOS transistors working in weak inversion. The proposed circuit, designed with a 0.6 Izm standard CMOS technology, gives a good temperature coefficient of 31ppm/℃ [-50-100℃] at a 1.8V supply, and also achieves line regulation of 0.01%/V and-120dB PSR at 1 MHz. Comparing with other presented work, the proposed circuit shows better temperature coefficient and Line regulation.

基于滤膜称重法的自动化粉尘质量浓度检测装置的研究

传统滤膜称重法操作过程繁琐、检测周期长,且自动化程度低,虽精度高但无法满足粉尘质量浓度实时检测需求。设计了粉尘质量浓度自动检测装置,通过建立温湿度补偿模型,替代手工称重法中采样后滤膜烘干的步骤,进一步缩减粉尘质量浓度检测时间以及粉尘质量浓度检测装置体积。搭建试验样机并调试实验,结果表明,煤矿井下常用的CCZ-20A型粉尘采样器与本装置检测得到的粉尘质量折算浓度经过计算其标准偏差在5%以内,一元线性回归拟合分析下的实验数据拟合相关性较好。为进一步提升装置的检测精度,研究基于傅里叶级数、线性拟合以及周期拟合相结合的误差补偿方法,设计出装置浓度计算流程并代入原始数据中,将该装置检测浓度误差由原始的(-7.20%,-1.26%)集中至(-3.64%,3.65%)。引入装置浓度计算流程后进行多次对比实验,实验结果显示装置浓度检测误差均在此区间内,验证了装置浓度计算流程的可靠性。该装置缩短了粉尘质量浓度检测所需时间,同时检测误差控制在合理的范围内,进而为滤膜称重法在粉尘质量浓度在线监测方面的研究提供一定的参考。

一种低温漂低功耗的带隙基准电压源设计

为了提高DC-DC转换器的性能,提出了一种电压带隙基准。通过调节参数抵消掉两路电流的一阶温度项,得到了只具有常数项和高阶温度项的电流,从而在输出电阻上转化为电压补偿三极管的高阶温度项,进而使得带隙具有较低的温度系数。之后在输出端加上RC滤波器,使得高频段的电源抑制比得到提升。同时为了探索带隙在低功耗下的工作特性,几乎将所有MOS管置于亚阈值区,达到降低静态电流的效果。基于TSMC 0.18μm CMOS工艺完成了电路的设计与仿真,结果表明,在1.8 V的电源电压下,带隙输出为1.256 V;在-40~140℃的变化范围内,温度系数为6.3×10^(-6)℃^(-1);通过增加RC滤波器,高频电源抑制比为-65 dB@10 MHz;而且整个带隙的静态电流仅有6.2μA。

一种新型带曲率补偿的带隙基准

针对传统带隙基准存在温度漂移大以及电源抑制比低的问题,提出了一种新型的带曲率补偿的带隙基准电压源。采用基极电流补偿以及曲率补偿技术对传统带隙基准结构进行改进。设计了低失配改进电路、低温漂改进以及启动电路等。利用共源共栅电流镜技术和负反馈网络保证带隙基准输出电压,极大程度降低了运放失调电压对带隙基准电压的干扰,实现了低温漂特性。基于东部高科0.18μm BCD工艺,在Cadence Spectre下进行仿真。仿真结果表明:该带隙基准电路在-40~150℃温度范围内,输入电压为5 V,输出电压稳定在1.192 V;温度系数为4.84×10^(-6)/℃;在低频时电源抑制比为-78 dB。

基于MEMS陀螺的高温随钻定向测斜仪研究

针对油气井测量时所面临的小孔径、超深井、温度范围广、温度变化率高、工作时间长等挑战,研究了基于MEMS陀螺仪的定向测斜仪,设计了MEMS陀螺定向测斜仪软硬件系统.为确保该环境下的测量精度提出了一种动态温度补偿方案,并采用基于小波滤波多尺度分析的方法对动态温变环境下陀螺输出信号进行去噪滤波处理,以实现定向测斜仪系统的测量精度.论文给出了定向测斜仪硬件系统方案、定向测斜算法、小波多尺度滤波算法.测试结果表明:该系统在常温和动态温变环境下井斜方位角精度优于±2°,井斜角精度优于±0.1°,工作温度最高150℃,可适应我国深层油气井勘探开发的应用场景需求.

一种低温度系数高阶补偿基准电压电路设计

基准电压对模拟系统的性能与精度有着至关重要的影响.一般的曲率补偿仅能消除与温度相关的二阶项,难以满足某些电路对高精度的要求.现有的电路存在温度系数较高的问题,亟须对更高阶进行补偿.本文提出了一种新的高阶曲率补偿方法,通过利用CMOS晶体管亚阈值特性设计,成功实现了一种低温度系数电压基准电路.该方法首先利用两个不同温度系数的电流流过相同的亚阈值区CMOS晶体管,产生两个具有不同温度特性的栅源电压.然后,通过对这两个不同温度特性的栅源电压进行相减,产生对数电压,并与一阶补偿电压进行加权叠加,从而实现高阶补偿.为了提高电源抑制比(PSRR),该电路采用了高增益负反馈回路,避免了传统电压基准电路中放大器的使用,进一步地降低了功耗.本设计基于0.18μm CMOS工艺,在Cadence软件下完成电路设计、版图设计与仿真验证.仿真结果显示,该电路正常工作电压范围为1.6~3 V,在2 V的工作电压下,基准电压输出295 mV,在-45~125℃范围内温度系数为1.26 ppm/℃,PSRR为51.1 dB@1 kHz,最大静态电流为8.9μA.结果表明,该基准电压电路能够满足高精度集成电路系统的需求.

基于磁性传感器的低失调温度补偿接口电路设计

面向磁性传感器在物联网(IoT)技术中的广泛应用,该文基于180 nm CMOS工艺设计了一种具有低失调电压,低温度漂移特性的霍尔传感器接口电路。针对霍尔传感器灵敏度的温度漂移特性,该文设计了一种感温电路并与查表法相结合,调节可编程增益放大器(PGA)的增益有效地降低了霍尔传感器的温度系数(TC)。在此基础上,通过在信号主通路中使用相关双采样(CDS)技术,极大程度上消除了霍尔传感器的失调电压。仿真结果表明,在–40°C~125°C温度范围内,霍尔传感器的TC从966.4 ppm/°C减小到了58.1 ppm/°C。信号主通路的流片结果表明,霍尔传感器的失调电压从25 mV左右减小到了4 mV左右,霍尔传感器的非线性误差为0.50%。芯片的总面积为0.69 mm^(2)。

基于MPSO-BP算法的四电极电化学气体传感器温度补偿研究

针对四电极电化学气体传感器的测量精度极易受环境温度影响的问题,提出一种基于粒子群优化BP神经网络算法(PSO-BP)的温度补偿方法。利用改进的PSO算法(MPSO)对BP神经网络的权值和阈值进行优化,构造四电极电化学气体传感器的温度补偿模型,并设计了气体传感器测试系统。实验结果表明,MPSO-BP算法可有效提高BP神经网络的收敛速度和泛化能力;基于MPSO-BP算法的四电极气体传感器温度补偿模型,可将温度补偿误差控制在0.1%以内。

松辽盆地白垩系青山口组一段页岩生、排烃组分特征及页岩油相态演化

松辽盆地白垩系青山口组一段(青一段)页岩有机质热演化程度跨度大、烃类流动性差异强。页岩油相态分析预测是页岩油勘探开发的重要难题。用低成熟页岩样品开展封闭体系及半封闭体系有机质热解实验,根据生、排烃组分特征对滞留烃的轻烃散失进行补偿校正,研究了页岩油组分演化特征。结合中央坳陷区主要生油凹陷典型井埋藏史、热演化史,研究了页岩油相态演化规律,提出了轻质页岩油勘探有利区和开发压力保护条件。研究结果表明:地质条件下随着有机质成熟度的升高,页岩油组分中轻质组分比例不断增加、气体逐渐增多,相包络线从高露点温度、低泡点压力依次向低露点温度、高泡点压力演化。齐家-古龙凹陷青一段页岩油在嫩江组中期油藏向挥发油油藏转化,长岭凹陷青一段页岩油从嫩江组末期开始油藏向挥发油油藏转化,三肇凹陷青一段页岩油则始终为黑油油藏。无论是黑油油藏还是挥发油油藏,均为单一液相。松辽盆地中央坳陷区青一段页岩油挥发油油藏主要分布在齐家-古龙凹陷中心和长岭凹陷北部有机质成熟度(镜质体反射率Ro)为1.3%~1.6%、地层压力为12.2~22.4 MPa的区域。

压杆式光纤光栅位移传感器的研制

基于光纤弹性应变与圆柱螺旋压缩弹簧轴向变形的传递机理,提出了一种压杆式光纤光栅位移传感器。推导出波长漂移与压簧自由端位移的关系式,采取光纤光栅两端夹持的应变传递封装,结合压簧、弹簧管与紧定装置组成弹性转换结构,采用线径0.6 mm,中径6 mm,有效圈数14的压簧元件制备了传感器原型,并对其静态性能和温度响应特性进行了标定试验研究。结果表明:在15 mm的量程内,传感器的位移灵敏度为451.36 pm/mm,线性度为0.69%,重复性为1.54%,迟滞性为1.13%;应变、温补光栅的温度灵敏度分别为10.15,19.18 pm/℃,误差分别为1.39%,1.50%,具有良好的温度补偿效果。

电主轴热补偿及轴承故障检测在热辐射测温方面的研究

针对电主轴轴体的热变形以及重要零部件轴承在加工中心上的常见故障,提出基于收集电主轴温度变化的热误差实时补偿计算方法与轴承常见故障的诊断方法。热误差补偿方法可以通过对轴体上测温点数据的处理对电主轴单元进行实时的热误差补偿提高加工精度。故障诊断方法是对不同的温度节点设置不同的阈值,阈值对应着电主轴单元内部某些重要零件的故障特征,当节点温度变化超出阈值即进行报警以诊断具体零件的故障。促进了电主轴的智能化进程,为接下来的研究打下基础。