Dissolution behavior of Al_(2)O_(3)inclusions into CaO-MgO-SiO_(2)-Al_(2)O_(3)-TiO_(2)system ladle slags

To investigate the dissolution behaviors of Al_(2)O_(3)inclusions in CaO-5wt%MgO-SiO_(2)-30wt%Al_(2)O_(3)-TiO_(2)system ladle slags,confocal scanning laser microscopy was conducted on the slags with different TiO_(2)contents(0-10wt%),and scanning electron microscopy was performed to study the interfacial reaction between Al_(2)O_(3)and this slag system.The results disclose that the dissolution of Al_(2)O_(3)inclusions does not result in the formation of new phases at the boundary between the slag and the inclusions.In TiO_(2)-bearing and TiO_(2)-free ladle slags,there is no difference in the dissolution mechanism of Al_(2)O_(3)inclusions at steelmaking temperatures.Boundary layer diffusion is found as the controlling step of the dissolution of Al_(2)O_(3),and the diffusion coefficient is in the range of 4.18×10^(-10)to 2.18×10^(-9)m^(2)/s at 1450-1500℃.Compared with the solubility of Al_(2)O_(3)in the slags,slag viscosity and temperature play a more profound role in the dissolution of Al_(2)O_(3)inclusions.A lower viscosity and a lower melting point of the slags are beneficial for the dissolution.Suitable addition of TiO_(2)(e.g.,5wt%)in ladle slags can enhance the dissolution of Al_(2)O_(3)inclusions because of the low viscosity and melting point of the slags,while excessive addition of TiO_(2)(e.g.,10wt%)shows the opposite trend.

Shock-induced energy localization and reaction growth considering chemical-inclusions effects for crystalline explosives

Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains unclear.Herein shock-induced energy localization,overall physical responses,and reactions in a-1,3,5-trinitro-1,3,5-triazinane(a-RDX)crystal entrained various chemical inclusions were investigated by the multi-scale shock technique implemented in the reactive molecular dynamics method.Results indicated that energy localization and shock reaction were affected by the intrinsic factors within chemical inclusions,i.e.,phase states,chemical compositions,and concentrations.The atomic origin of chemical-inclusions effects on energy localization is dependent on the dynamics mechanism of interfacial molecules with free space volume,which includes homogeneous intermolecular compression,interfacial impact and shear,and void collapse and jet.As introducing various chemical inclusions,the initiation of those dynamics mechanisms triggers diverse decay rates of bulk RDX molecules and hereby impacts on growth speeds of final reactions.Adding chemical inclusions can reduce the effectiveness of the void during the shock impacting.Under the shockwave velocity of 9 km/s,the parent RDX decay rate in RDX entrained amorphous carbon decreases the most and is about one fourth of that in RDX with a vacuum void,and solid HMX and TATB inclusions are more reactive than amorphous carbon but less reactive than dry air or acetone inclusions.The lessdense shocking system denotes the greater increases in local temperature and stress,the faster energy liberation,and the earlier final reaction into equilibrium,revealing more pronounced responses to the present intense shockwave.The quantitative models associated with the relative system density(RD_(sys))were proposed for indicating energy-localization mechanisms and evaluating initiation safety in the shocked crystalline explosive.RD_(sys)is defined by the density ratio of defective RDX to perfect crystal after dynamics relaxation and reveals the global density characteristic in shocked systems filled with chemical inclusions.When RD_(sys)is below 0.9,local hydrodynamic jet initiated by void collapse dominates upon energy localization instead of interfacial impact.This study sheds light on novel insights for understanding the shock chemistry and physical-based atomic origin in crystalline explosives considering chemical-inclusions effects.

Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

Evolution of nonmetallic inclusions in 80-t 9CrMoCoB large-scale ingots during electroslag remelting process

In combination with theoretical calculations,experiments were conducted to investigate the evolution behavior of nonmetallic inclusions(NMIs)during the manufacture of large-scale heat-resistant steel ingots using 9CrMoCoB heat-resistant steel and CaF_(2)–CaO–Al_(2)O_(3)–SiO_(2)–B_(2)O_(3)electroslag remelting(ESR)-type slag in an 80-t industrial ESR furnace.The main types of NMI in the consumable electrode comprised pure alumina,a multiphase oxide consisting of an Al_(2)O_(3)core and liquid CaO–Al_(2)O_(3)–SiO_(2)–MnO shell,and M_(23)C_(6)carbides with an MnS core.The Al_(2)O_(3)and MnS inclusions had higher precipitation temperatures than the M_(23)C_(6)-type carbide under equilibrium and nonequilibrium solidification processes.Therefore,inclusions can act as nucleation sites for carbide layer precipitation.The ESR process completely removed the liquid CaO–Al_(2)O_(3)–SiO_(2)–MnO oxide and MnS inclusion with a carbide shell,and only the Al_(2)O_(3)inclusions and Al_(2)O_(3)core with a carbide shell occupied the remelted ingot.The M_(23)C_(6)-type carbides in steel were determined as Cr_(23)C_(6)based on the analysis of transmission electron microscopy results.The substitution of Cr with W,Fe,or/and Mo in the Cr_(23)C_(6)lattice caused slight changes in the lattice parameter of the Cr_(23)C_(6)carbide.Therefore,Cr_(21.34)Fe_(1.66)C_(6),(Cr_(19)W_(4)C_(6),Cr_(18.4)Mo_(4.6)C_(6),and Cr_(16)Fe_(5)Mo_(2)C_(6)can match the fraction pattern of Cr_(23)C_(6)carbide.The Al_(2)O_(3)inclusions in the remelted ingot formed due to the reduction of CaO,SiO_(2),and MnO components in the liquid inclusion.The increased Al content in liquid steel or the higher supersaturation degree of Al_(2)O_(3)precipitation in the remelted ingot than that in the electrode can be attributed to the evaporation of CaF_(2)and the increase in CaO content in the ESR-type slag.

Critical precipitation behavior of MnTe inclusions in resulfurized steels during solidification

Te treatment is an effective method for modifying sulfide inclusions,and MnTe precipitation has an important effect on thermal brittleness and steel corrosion resistance.In most actual industrial applications of Te treatment,MnTe precipitation is unexpected.The critical precipitation behavior of MnTe inclusions was investigated through scanning electron microscopy,transmission electron microscopy,machine learning,and first-principles calculation.MnTe preferentially precipitated at the container mouth for sphere-like sulfides and at the interface between MnS grain boundaries and steel matrix for rod-like sulfides.The MnS/MnTe interface was semicoherent.A composition transition zone with a rock-salt structure exhibiting periodic changes existed to maintain the semicoherent interface.The critical precipitation behavior of MnTe inclusions in resulfurized steels involved three stages at varying temperatures.First,Mn(S,Te)precipitated during solidification.Second,MnTe with a rock-salt structure precipitated from Mn(S,Te).Third,MnTe with a hexagonal NiAs structure transformed from the rock-salt structure.The solubility of Te in MnS decreased with decreasing temperature.The critical precipitation behavior of MnTe inclusions in resulfurized steels was related to the MnS precipitation temperature.With the increase in MnS precipitation temperature,the critical Te/S weight ratio decreased.In consideration of the cost-effectiveness of Te addition for industrial production,the Te content in resulfurized steels should be controlled in accordance with MnS precipitation temperature and S content.

Carbon Enrichment in the Lithospheric Mantle:Evidence from the Melt Inclusions in Mantle Xenoliths from the Hainan Basalts

It is generally believed that the lithospheric mantle and the mantle transition zone are important carbon reservoirs.However,the location of carbon storage in Earth's interior and the reasons for carbon enrichment remain unclear.In this study,we report CO_(2)-rich olivine-hosted melt inclusions in the mantle xenoliths of late Cenozoic basalts from the Penglai area,Hainan Province,which may shed some light on the carbon enrichment process in the lithospheric mantle.We also present a detailed petrological and geochemical investigation of the late Cenozoic basalts and mantle xenoliths from northern Hainan Island.The collected samples of late Cenozoic Hainan Island basalts belong to both alkaline and subalkaline series,showing fractionated REE patterns with high(La/Yb)_(N)values of 3.52–11.77,which are typical for OIB.Based on Al-in-olivine thermometry,the temperatures estimated for the mantle xenoliths can be divided into two groups.One group has temperatures of less than 1050℃,and the other group has temperature ranging from 1050℃to 1282℃.Clinopyroxene(La/Yb)_(N)–Ti/Eu and clinopyroxene Ca/Al–Mg^(#)diagrams indicate that the mantle peridotite experienced metasomatism from both silicate and carbonate melts.Melt inclusions in the olivine of mantle xenoliths include(1)CO_(2)bubble–rich melt inclusions;(2)multiphase melt inclusions(glass+CO_(2)bubble+daughter minerals);(3)pure glass melt inclusions.Magnesite is a daughter mineral in the olivine-hosted melt inclusions,which could be interpreted as a secondary mineral formed by the interactions of CO_(2)-rich fluids with an olivine host,due to post-entrapment effects.The glasses in olivine-hosted melt inclusions have high SiO_(2)contents(60.21–77.72 wt%).Our results suggest that a considerable amount of CO_(2)-rich melt inclusions are captured in the lithospheric mantle during metasomatism.The lithospheric mantle can therefore act as is a‘carbon trap',with much CO_(2)being absorbed by the lithospheric mantle in this way.

A Broad Range Triboelectric Stiffness Sensor for Variable Inclusions Recognition

With the development of artificial intelligence,stiffness sensors are extensively utilized in various fields,and their integration with robots for automated palpation has gained significant attention.This study presents a broad range self-powered stiffness sensor based on the triboelectric nanogenerator(Stiff-TENG)for variable inclusions in soft objects detection.The Stiff-TENG employs a stacked structure comprising an indium tin oxide film,an elastic sponge,a fluorinated ethylene propylene film with a conductive ink electrode,and two acrylic pieces with a shielding layer.Through the decoupling method,the Stiff-TENG achieves stiffness detection of objects within 1.0 s.The output performance and characteristics of the TENG for different stiffness objects under 4 mm displacement are analyzed.The Stiff-TENG is successfully used to detect the heterogeneous stiffness structures,enabling effective recognition of variable inclusions in soft object,reaching a recognition accuracy of 99.7%.Furthermore,its adaptability makes it well-suited for the detection of pathological conditions within the human body,as pathological tissues often exhibit changes in the stiffness of internal organs.This research highlights the innovative applications of TENG and thereby showcases its immense potential in healthcare applications such as palpation which assesses pathological conditions based on organ stiffness.

Influence of vacuoles with gas–liquid inclusions on the thermobaric destruction conditions of natural quartz under dynamic heating in an RF-TICP torch system

In the present work,the turbulent mixing process of a polydisperse quartz particle flow with a plasma stream generated by a radio-frequency(RF)inductively coupled plasma torch was numerically studied.The thermobaric stress in the quartz particles under dynamic heating in a heterogeneous plasma flow was determined by a two-stage approximation approach.The effect of the presence of vacuoles in natural quartz on the particle thermobaric destruction conditions was studied.It was found that the equivalent thermal and baric stresses in quartz particles may significantly increase in the presence of vacuoles within a small gas volume fraction.The influence of the regime and energetic working conditions of an RF inductively coupled plasma torch system on the particle thermobaric destruction conditions was examined,and a recommendation was given to promote the degree of thermobaric destruction of quartz particles,which is of substantial importance for improving the overall enrichment efficiency of quartz concentrates.

Geochemical characteristics of temperature and pressure of Paleozoic reservoir fluid inclusions in Xuanjing region, Lower Yangtze area

In order to understand the geochemical characteristics of Paleozoic reservoir fluids in Xuanjing region,Lower Yangtze area,drilling core samples from Y and D wells were tested and analyzed to study the fluid inclusion types and composition.Pressure correction was undertaken to determine the temperature and pressure environment for inclusion formation,and the influence of fluid characteristics of the Upper Permian and Lower Triassic reservoirs on the preservation of shale gas was investigated.According to petrograph-ic observations,fluid inclusions are mainly brine and bitumen inclusions.Bitumen inclusions are mainly distributed in holes and fractures,and with smaller individuals.No visible fluorescence was observed,and the vitrinite reflectance is 3.39%–3.92%.This indicates that there had been oil and gas accumulation in the early stage of diagenesis in the study area,but due to the influence of magmatic hydrothermal solution,oil and gas underwent thermal metamorphism in the early stage,making liquid petroleum into solid bitumen.At present,oil and gas in the reservoir were largely formed in the late stage.During the continuous process in which shale was buried,light oil and gas were generated.Light oil and gas underwent magmatic and tectonic hydrothermal processes in some areas,resulting in high-temperature metamorphic cracking that formed dry gas.Moreover,nitrogen inclusions are found in fluid inclusions,forming metamorphic fluids caused by mag-matic hydrothermal activities.The study shows that Paleozoic reservoirs in Xuanjing area are characterized by self-generation and self-storage.Furthermore,the mechanism of shale gas accumulation is not only related to the buried hydrocarbon generation process of shale itself,but is also related to later magmatic activity and tectonic hydrothermal transformation.Therefore,preservation conditions are generally key factors of shale gas accumulation in this area.

Distribution characteristics of inclusions along with the surface sliver defect on the exposed panel of automobile:A quantitative electrolysis method

The specific distribution characteristics of inclusions along with the sliver defect were analyzed in detail to explain the formation mechanism of the sliver defect on the automobile exposed panel surface.A quantitative electrolysis method was used to compare and evaluate the three-dimensional morphology,size,composition,quantity,and distribution of inclusions in the defect and non-defect zone of automobile exposed panel.The Al2O3 inclusions were observed to be aggregated or chain-like shape along with the sliver defect of about 3–10μm.The aggregation sections of the Al2O3 inclusions are distributed discretely along the rolling direction,with a spacing of 3–7 mm,a length of 6–7 mm,and a width of about 3 mm.The inclusion area part is 0.04%–0.16%with an average value of 0.08%,the inclusion number density is 40 mm−2 and the inclusion average spacing is 25.13μm.The inclusion spacing is approximately 40–160μm,with an average value of 68.76μm in chain-like inclusion parts.The average area fraction and number density of inclusions in the non-defect region were reduced to about 0.002%and 1–2 mm^−2,respectively,with the inclusion spacing of 400μm and the size of Al2O3 being 1–3μm.

Microthermometry and Synchrotron Radiation X-ray Fluorescence Analysis of Fluid Inclusions in the Dongping Gold Deposit,Northern Margin of the North China Craton

To shed light on the genesis of the Dongping deposit and reveal the behaviour of CO_(2),Au and other ore elements(e.g.,Cu,Fe,Zn,As,Sb,Co etc.)in ore-forming fluids,petrographic,microthermometric and synchrotron radiation X-ray fluorescence(SRXRF)analyses of fluid inclusions were conducted.The ore-forming fluid is characterized as an H_(2)O-CO_(2)-NaCl system with medium-high temperatures and low salinity.Four mineralization stages are identified,namely,feldsparquartz(stage 1);pyrite-white quartz(stage 2);sulfide-smoky grey quartz(stage 3);and carbonate-quartz(stage 4).Three types of inclusions were distinguished,based on fluid composition,phase assemblages and mode of homogenization.Type A:H_(2)O-rich fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+vapour H_(2)O(VH_(2)O))at room temperature and homogenize to the liquid phase.Type B:H_(2)O-CO_(2)fluid inclusions contain 2–3 phases(liquid H_(2)O(LH_(2)O)+vapour CO_(2)(VCO_(2));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2)));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))+vapour CO_(2)(VCO_(2)))at room temperature and homogenized to the liquid H_(2)O phase.Type C:H_(2)O-CO_(2)fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))at room temperature and homogenize to a critical state.CO_(2)is clearly more enriched in the fluid inclusions of stages 2 and 3 than in stage 1.Stage 1 is dominated by type A(H_(2)O-rich)inclusions with homogenization temperatures(Th)of 220–359℃and salinities of 1.1–3.1 wt%NaCl equivalent.Type B(CO_(2)-rich)inclusions gradually increase in stages 2 and 3.The Th range of type B inclusions in stage 2 is 241–397℃with salinities of 2.2–6.9 wt%NaCl equivalent;the Th range of type A inclusions is 217–373℃with salinities of 1.2–8.1 wt%NaCl equivalent.The Th range of type B inclusions in stage 3 is 215–361℃with salinities of 2.9–6.1 wt%NaCl equivalent;the range of type A inclusions is 158–351℃with a salinity of 0.7–5.5 wt%NaCl equivalent.Stage 4 is characterized by type A with Th of 151–250℃and salinities of 0.9–8.3 wt%NaCl equivalent.The mapping results show that elements As,Te and Sb are more concentrated in vapour CO_(2)than in liquid H_(2)O at room temperature,which suggests that vapour components are more able to transport elements when phase separation occurs.The SRXRF quantitative results show that Au,Cl,S and some other metals are obviously more enriched in the fluid inclusions of stages 2 and 3 than those in stage 1.Additionally,the contents of S in stages 1–3 are much lower than those of Cl,which suggests that gold might migrate mainly in the form of a gold-chloride complex.Au is more enriched in type B fluid inclusions than in type A fluid inclusions,which suggests that the enrichment and migration of gold are closely related to CO_(2)and CO_(2)plays a critical role in the migration and enrichment of gold.The trace elements in the fluid have a similar change trend to those in the Yanshanian syenogranite distributed in the southeastern part of the mining area,which may provide some evidence for an intrusion-related genesis for the Dongping gold deposit.

Dissolution of TiO_(2) and TiN inclusions in CaO–SiO_(2)–B_(2)O_(3)-based fluorine-free mold flux

Mold flux serves the crucial metallurgical function of absorbing inclusions, directly impacting the smoothness of the casting process as well as the cast slab quality. In this study, the dissolution behavior and mechanism of Ti O_(2)and Ti N inclusions in molten Ca O–Si O_(2)–B_(2)O_(3)-based fluorine-free mold flux were explored by in situ single hot thermocouple technology combined with X-ray photoelectron spectroscopy.The results showed that Ti O_(2) inclusions are effectively dissolved by the molten slag within 76 s, during which the original octahedral [Ti O_(6)]^(8-)structures are destroyed and convert to the networker tetrahedral [Ti O_(4)]^(4-)structures. However, the dissolution rate is much lower for Ti N inclusions than for Ti O_(2)inclusions. This can be attributed to the fact that the Ti N particles need to be oxidized and then dissolved in the molten slag to form tetrahedral [Ti O4]4-and octahedral [Ti O_(6)]^(8-)structures during the Ti N inclusion dissolution process, which is accompanied by the generation of a large amount of N_(2)gas. Moreover, Ca Ti O_(3)crystals tend to nucleate and grow on bubble surfaces with sufficient octahedral [Ti O_(6)]^(8-)structures and Ca^(2+)ions, eventually resulting in the molten slag being in a solid–liquid mixed state.

Geochemistry,Fluid Inclusions and Sulfur Isotopes of the Goshgarchay Cu-Au Deposit(Western Azerbaijan)in Lesser Caucasus:Implications for the Origins of Ore-forming Fluids

The Goshgarchay Cu-Au deposit is located in the central part of the northwest flank of the Murovdagh region in the Lesser Caucasus.The Goshgarchay Cu-Au deposit is associated with Middle Jurassic volcanic and Late Jurassic-Early Cretaceous high-K calc-alkaline intrusive rocks.The Cu-Au mineralization is commonly related to quartz-sericite-chlorite alteration dominantly composed of chalcopyrite,gold,sphalerite,pyrite,bornite,hematite,covellite,chalcocite,malachite,and azurite.The Goshgarchay copper-gold deposit,which is 600 m wide and approximately 1.2 km long,is seen as a faultcontrolled and vein-,stockwork-and disseminated type deposit.The Goshgarchay Cu-Au deposit predominantly comprises Cu(max.64500 ppm)and Au(max.11.3 ppm),while it comprises relatively less amounts Zn(max.437 ppm),Mo(max.47.5 ppm),Pb(max.134 ppm),and Ag(max.21 ppm).The homogenization temperatures and salinities of fluid inclusions in quartz for stage Ⅰ range from 380℃ to 327℃,and 6.9 wt% to 2.6 wt% NaCl eq.,respectively.Thand salinities in quartz for stage Ⅱ range from 304℃ to 253℃,and 7.6 wt% to 3.2 wt% NaCl eq.,respectively.The calculated δ^(34)S_(h2s)values(-1.5‰ to 5.5‰)of sulfides and especially the narrow range of δ^(34)S_(h2s) values of chalcopyrite and bornite(between -0.07‰ and +0.7‰)indicate that the source of the Goshgarchay Cu-Au mineralization is magmatic.Based on the mineralogical,geochemical,fluid inclusion,and sulfur isotopic data,the Goshgarchay Cu-Au deposit represents a late stage peripheral magmatic-hydrothermal mineralization probably underlain by a concealed porphyry deposit.

Textural and functional analysis of sorghum flour cookies as ice cream inclusions

Flour serves as one of the primary ingredients of cookies,which affects dough properties,physical changes during baking,and post-baking cookie properties.Two gluten-free cookie formulations were developed with the goal of use as inclusions in frozen desserts.Blonde and chocolate cookies were made with sorghum flour or all-purpose wheat flour and then evaluated for physical and chemical properties.To determine functionality in a frozen state,texture analysis was conducted on cookies at−30℃,−17°C,and 20℃,replicating various ice cream storage temperatures.To simulate the process effect of incorporating the product into a frozen dessert,cookies were crumbled mechanically,and the crumbles were separated based on size.When evaluating cookies,no significant differences(P<0.05)were observed in width(W),thickness(T),spread,and W/T ratio for flour source within formula.Blonde cookies had lower moisture contents than chocolate cookies;further,blonde cookies made from sorghum flour had less moisture than those made with wheat flour.As the cookie temperature decreased from 20℃to−17℃,cookie hardness increased,with flour type having no effect.Within formula,cookies had similar instrumental color parameters.However,blonde cookies made from sorghum flour produced more smaller-sized pieces than those made from wheat flour.The results of this study demonstrate that sorghum flour cookies have desirable properties for use as inclusions in ice cream and other frozen desserts.

Mineralization of the Liwu large-scale stratiform copper deposits in Sichuan Province, China: Constraints from fluid inclusions

The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features.Laser Raman analysis indicates that the ore-forming fluids is a H_(2)O-NaCl-CH_(4)(-CO_(2))system.Fluid inclusions microthermometry shows a homogenization temperature of 181-375°C and a salinity of 5.26%-16.99%for the disseminated-banded Cu-Zn mineralization;but a homogenization temperature of 142-343°C and a salinity of 5.41%-21.19%for the massive-veined Cu-Zn mineralization.These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids.H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water,plus minor formation water.And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks.Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction;whereas that of the massive-veined mineralization was mainly correlated with fluid boiling.The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones.This study is beneficial to understand the stratiform copper deposit.

Modification of MgO·Al_2O_3 spinel inclusions in Al-killed steel by Ca-treatment

The modification of MgO·Al2O3 spinel inclusions in Al-killed steel by Ca-treatment has been studied by industrial trials and thermodynamic calculations.In the industrial trials,samples were taken systematically during the refining process in which the molten steel was treated by calcium,and the characters of the inclusions were analyzed using scanning electron microscopy （SEM） and energy dispersive spectra （EDS）.The effects of Ca-treatment were evaluated by tracking the compositions of the inclusions.The results show that the modification of MgO·Al2O3 spinel inclusions by Ca-treatment is effective and the transformation sequence of the inclusions during the refining is Al2O3 →MgO·Al2O3 →liquid complex inclusions.The modification of spinel inclusions by Ca-treatment was calculated by FactSage 6.0 utilizing its free-energy minimization routines.The results of thermodynamic calculations indicate that spinel inclusions are easier to be modified than Al2O3 inclusions and the spinel inclusions in 30CrMo steel would transform to liquid complex inclusions when the content of dissolved Ca in the molten steel exceeds 1×10-6.Also,the results show that adding more calcium into the molten steel would lower the contents of Al2O3 and MgO and increase the CaO content of the inclusions,while the change in SiO2 content is little.

Comparison between the surface defects caused by Al_2O_3 and TiN inclusions in interstitial-free steel auto sheets

Al_2O_3 and TiN inclusions in interstitial-free(IF) steel deteriorate the properties of the steel. To decrease the defects of cold-rolled sheet, it is important to clearly distinguish between the degrees of damage caused by these two inclusions on the surface quality of the steel. In this study, a nanoindenter was used to test the mechanical properties of the inclusions, and the distribution and size of the inclusions were obtained by scanning electron microscopy(SEM). It was found that when only mechanical properties are considered, TiN inclusions are more likely to cause defects than Al_2O_3 inclusions of the same size during the rolling process. However, Al_2O_3 inclusions are generally more inclined to cause defects in the rolling process than TiN inclusions because of their distribution characteristic in the thickness direction. The precipitation of Al_2O_3 and TiN was obtained through thermodynamical calculations. The growth laws of inclusions at different cooling rates were calculated by solidification and segregation models. The results show that the precipitation regularity is closely related to the distribution law of the inclusions in IF slabs along the thickness direction.

He-Ar Isotopic Systematics of Fluid Inclusions in Pyrites from PGEpolymetallic Deposits in Lower Cambrian Black Rock Series, South China

He-Ar isotopic compositions of fluid inclusions trapped in pyrites from some representative PGE-polymetallic deposits in Lower Cambrian black rock series in South China were analyzed by using an inert gas isotopic mass spectrometer. The results show that the ore-forming fluids possess a low 3He/4He ratio, varying from 0.43×10-8 to 26.39×10-8, with corresponding R/Ra value of 0.003-0.189. The 40Ar/36Ar ratios are 258-287, close to those of air saturated water (ASW). He-Ar isotopic indicator studies show that the ore-forming fluids were mainly derived from the formation water or basinal hot brine and sea water, while the content of mantle-derived fluid or deep-derived magmatic water might be negligible. The PGE-polymetallic mineralization might be related to the evolution of the Caledonian miogeosynclines distributed along the southern margin of the Yangtze Craton. During the Early Cambrian, the formation water or basinal hot brine trapped in Caledonian basins which accumulated giant thick sediments was expelled and migrated laterally along strata because of the pressure generated by overlying sediments. The basinal hot brine ascended along faults, mixed with sea water and finally deposited ore minerals.

APPLICATION OF A NEW FAST MULTIPOLE BEM FOR SIMULATION OF 2D ELASTIC SOLID WITH LARGE NUMBER OF INCLUSIONS

A fast multipole method(FMM)is applied for BEM to reduce both the operation and memory requirement in dealing with very large scale problems.In this paper,a new version of fast multipole BEM for 2D elastostatics is presented and used for simulation of 2D elastic solid with a large number of randomly distributed inclusions combined with a similar subregion approach.Generalized minimum residual method(GMRES)is used as an iterative solver to solve the equation system formed by BEM iteratively.The numerical results show that the scheme presented is applicable to certain large scale problems.

Control of the precipitation of TiN inclusions in gear steels

In the 20CrMnTi steel production process, the nitrogen content increased by 19 × 10^-6 and 29 × 10^-6, respectively, during ladle furnace（LF） refining and during the casting process from ladle to tundish. The protective casting is the key to decrease the N content. The results of thermodynamic calculations and a growth kinetics investigation show that TiN formation occurs only when the solidification fraction is greater than 0.533 under the controlled conditions used in this study for the manufacture of 20CrMnTi steel; the radius of TiN particles decreases as the Ti and N contents decrease and as the cooling rate increases. Furthermore, the theory of austenite grains controlled by second-phase particles was analyzed. The elemental analysis results showed that the Ti content was controlled at 0.04wt%–0.06wt% and the N content decreased to 0.005wt%, which satisfy the requirements for grain refinement but can also effectively prevent the precipitation of TiN inclusions in 20CrMnTi steel.