Background: The ability to climb stairs (ascending and descending stair without using a handrail) and rise from a chair (rising from chairs without using an elbow rest) are among the most important measures of physica...Background: The ability to climb stairs (ascending and descending stair without using a handrail) and rise from a chair (rising from chairs without using an elbow rest) are among the most important measures of physical function for ADL evaluation for the independent living, and assessed by the questioners on many epidemiological studies in elderly. But little is known about the relationship between the self-reported performance level of the tasks and lower leg strength and power in very elderly people. The purpose of this study was to ascertain the relationship between the self-reported performance level of two tasks and the lower leg function in community-dwelling 80-year-old population. Methods: Out of 994 persons who were 80 years old living in Morioka City, Iwate Prefecture, Japan, 607 individuals (236 men and 371 women) underwent a physical fitness test that included measurements of leg extensor power and knee extensor strength. The ability to climb up stair and to rise from a chair was assessed by self- reported questionnaire which was ranked in three levels. The area under the receiver-operating characteristic (ROC) curve (AUC) was used to evaluate the measurements. Results: The cut-off points for the leg extensor power of subjects who could completely perform the stair-climbing and chair-rising functions were determined to be approximately 8.6 watt/kg body mass for men and 5.6 watt/kg body mass for women. In addition, the cut-off points for the knee extensor strength of subjects who could completely perform the stair-climbing and chair-rising functions were determined to be approximately 0.97 kg/kg body mass for men and 0.84 kg/kg body mass for women. Conclusions: From a practical viewpoint, the present study suggested that the cut-off points of leg extensor power and knee extensor strength can be used as targets in simple self-reported questionnaires to help in screening for mobility in 80-year-old展开更多
It is said that a graph G is independent-set-deletable factor-critical （in short, ID-factor-critical）, if, for everyindependent-set I which has the same parity as ｜V（G）｜, G - I has a perfect matching. A graph G ...It is said that a graph G is independent-set-deletable factor-critical （in short, ID-factor-critical）, if, for everyindependent-set I which has the same parity as ｜V（G）｜, G - I has a perfect matching. A graph G is strongly IM-extendable, if for every spanning supergraph H of G, every induced matching of H is included in a perfect matching of H. The κ-th power of G, denoted by G^κ, is the graph with vertex set V（G） in which two vertices are adjacent if and only if they have distance at most k in G. ID-factor-criticality and IM-extendability of power graphs are discussed in this article. The author shows that, if G is a connected graph, then G^3 and T（G） （the total graph of G） are ID-factor-critical, and G^4 （when ｜V（G）｜ is even） is strongly IM-extendable; if G is 2-connected, then D^2 is ID-factor-critical.展开更多
A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is t...A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is to utilize system as a black box.The system studied is condenser system of one of MAPNA's power plants.At first,principal component analysis(PCA) approach was applied to reduce the dimensionality of the real acquired data set and to identify the essential and useful ones.Then,the fault sources were diagnosed by ICA technique.The results show that ICA approach is valid and effective for faults detection and diagnosis even in noisy states,and it can distinguish main factors of abnormality among many diverse parts of a power plant's condenser system.This selectivity problem is left unsolved in many plants,because the main factors often become unnoticed by fault expansion through other parts of the plants.展开更多
The energizing of large power transformers has long been considered a critical event in the operation of an electric power system. When a transformer is energized by the utility, a typical inrush current could be as h...The energizing of large power transformers has long been considered a critical event in the operation of an electric power system. When a transformer is energized by the utility, a typical inrush current could be as high as ten times its rated current. This could cause many problems from mechanical stress on transformer windings to harmonics injection, and system protection malfunction. There have been numerous researches focusing on calculation and mitigation of the transformer inrush current. With the development of smart grid, distributed generation from independent power producers (IPPs) is growing rapidly. This paper investigates the inrush current due to black start of an IPP system with several parallel transformers, through a simulation model in DIgSILENT Power Factory software. The study demonstrates that a single genset is capable of energizing a group of transformers since the overall inrush current is slightly above the inrush of the transformer directly connected to the generator. In addition, a simple method is proposed to mitigate the inrush current of the transformers using an auxiliary transformer.展开更多
文摘Background: The ability to climb stairs (ascending and descending stair without using a handrail) and rise from a chair (rising from chairs without using an elbow rest) are among the most important measures of physical function for ADL evaluation for the independent living, and assessed by the questioners on many epidemiological studies in elderly. But little is known about the relationship between the self-reported performance level of the tasks and lower leg strength and power in very elderly people. The purpose of this study was to ascertain the relationship between the self-reported performance level of two tasks and the lower leg function in community-dwelling 80-year-old population. Methods: Out of 994 persons who were 80 years old living in Morioka City, Iwate Prefecture, Japan, 607 individuals (236 men and 371 women) underwent a physical fitness test that included measurements of leg extensor power and knee extensor strength. The ability to climb up stair and to rise from a chair was assessed by self- reported questionnaire which was ranked in three levels. The area under the receiver-operating characteristic (ROC) curve (AUC) was used to evaluate the measurements. Results: The cut-off points for the leg extensor power of subjects who could completely perform the stair-climbing and chair-rising functions were determined to be approximately 8.6 watt/kg body mass for men and 5.6 watt/kg body mass for women. In addition, the cut-off points for the knee extensor strength of subjects who could completely perform the stair-climbing and chair-rising functions were determined to be approximately 0.97 kg/kg body mass for men and 0.84 kg/kg body mass for women. Conclusions: From a practical viewpoint, the present study suggested that the cut-off points of leg extensor power and knee extensor strength can be used as targets in simple self-reported questionnaires to help in screening for mobility in 80-year-old
基金Project supported by NSFC(10371112)NSFHN (0411011200)SRF for ROCS,SEM
文摘It is said that a graph G is independent-set-deletable factor-critical （in short, ID-factor-critical）, if, for everyindependent-set I which has the same parity as ｜V（G）｜, G - I has a perfect matching. A graph G is strongly IM-extendable, if for every spanning supergraph H of G, every induced matching of H is included in a perfect matching of H. The κ-th power of G, denoted by G^κ, is the graph with vertex set V（G） in which two vertices are adjacent if and only if they have distance at most k in G. ID-factor-criticality and IM-extendability of power graphs are discussed in this article. The author shows that, if G is a connected graph, then G^3 and T（G） （the total graph of G） are ID-factor-critical, and G^4 （when ｜V（G）｜ is even） is strongly IM-extendable; if G is 2-connected, then D^2 is ID-factor-critical.
基金Project(217/s/458)supported by Azarbaijan Shahid Madani University,Iran
文摘A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is to utilize system as a black box.The system studied is condenser system of one of MAPNA's power plants.At first,principal component analysis(PCA) approach was applied to reduce the dimensionality of the real acquired data set and to identify the essential and useful ones.Then,the fault sources were diagnosed by ICA technique.The results show that ICA approach is valid and effective for faults detection and diagnosis even in noisy states,and it can distinguish main factors of abnormality among many diverse parts of a power plant's condenser system.This selectivity problem is left unsolved in many plants,because the main factors often become unnoticed by fault expansion through other parts of the plants.
文摘The energizing of large power transformers has long been considered a critical event in the operation of an electric power system. When a transformer is energized by the utility, a typical inrush current could be as high as ten times its rated current. This could cause many problems from mechanical stress on transformer windings to harmonics injection, and system protection malfunction. There have been numerous researches focusing on calculation and mitigation of the transformer inrush current. With the development of smart grid, distributed generation from independent power producers (IPPs) is growing rapidly. This paper investigates the inrush current due to black start of an IPP system with several parallel transformers, through a simulation model in DIgSILENT Power Factory software. The study demonstrates that a single genset is capable of energizing a group of transformers since the overall inrush current is slightly above the inrush of the transformer directly connected to the generator. In addition, a simple method is proposed to mitigate the inrush current of the transformers using an auxiliary transformer.
