In this paper, the relationships of the plunges and azimuths of T and P axes versus the strikes, dips, and rakes of two seismic nodal planes were derived to provide ref- erence for earthquake researchers. The independ...In this paper, the relationships of the plunges and azimuths of T and P axes versus the strikes, dips, and rakes of two seismic nodal planes were derived to provide ref- erence for earthquake researchers. The independence of the plunges and azimuths of T, B, and P axes in focal mech- anism solution was discussed, and it was concluded that three parameters, i.e., the azimuths of T, B and P axes, are completely independent. The focal mechanism solution representation based on Euler rotation was introduced, using three Euler angles in place of the plunges and azi- muths of T, B, and P axes, and three focal mechanism solution representations were briefly compared and ana- lyzed in respect of accuracy on the basis of the assumption of rounding; it was concluded that the Euler angle repre- sentation has better accuracy, compared with the azimuth representation and the traditional representation with T, B, and P axes.展开更多
An improvement strategy which controls the shift effort and the power summing planetary gear set of steering clutches and brakes have been proposed based on the dynamic model of synchroniser in order to decrease the w...An improvement strategy which controls the shift effort and the power summing planetary gear set of steering clutches and brakes have been proposed based on the dynamic model of synchroniser in order to decrease the wear of synchroniser inserts, make gear shift easy and reduce the shock noise for a positive independent mechanical split path transmission which attached an auto- matic shift system when shifting. A kinetics model for the process of synchroniser engagement is built and analyzed in the paper. Thus for optimizing the gear shift process which is divided into three phases a model reference fuzzy self-adaption system is adopted. Through a 6 000 km road experiment, the control strategy has proved feasible and dependable.展开更多
IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or down...IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or downward tailoring on its interpretation for practical IV & V. It contains crucial and encompassing check points and guidelines to analyze the design integrity, without addressing the formalized and the specific criteria for IV & V activities confirming the technical integrity. It is necessary to list up the inspection viewpoint via interpretation of the standard that is practical review points checking design consistency. For fruitful IV & V of Control Element Driving Mechanism Control System (CEDMCS) software for Yonggwang Nuclear Power Plant unit 3 & 4, the specific viewpoints and approach are necessary based on the guidelines of IEEE 1012 to enhance the system quality by considering the level of implementation of the theoretical and the practical IV & V. Additionally IV & V guideline of IEEE 1012 does not specifically provide the concrete measure considering the system characteristics of CEDMCS. This paper provides the seven (7) characteristic criteria for CEDMCS IV & V, and by applying these viewpoints, the design analysis such as function, performance, interface and exception, backward and forward requirement traceability analysis has been conducted. The requirement, design, implementation, and test phase were only considered for IV & V in this project. This article also provides the translation of code to map theoretical verification and validation into practical verification and validation. This paper emphasizes the necessity of the intensive design inspection and walkthrough for requirement phase to resolve the design faults because the IV & V of early phase of SDLC obviously contributes to find out most of critical design inconsistency. Especially for test phase IV & V, it is strongly recommended to prepare the test plan document which is going to be the basis for the test coverage selection and test strategy. This test plan document should be based on the critical characteristics of function and performance of CEDMCS. Also to guarantee the independency of V & V organization participating in this project, and to acquire the full package of design details for IV & V, the systematic approach and efforts with an aspect of management is highlighted among the participants.展开更多
基金supported by Special Foundation for Seismic Research (Grant No.201208006)Director Foundation of Institute of Seismology,China Earthquake Adminstration (Grant Nos.IS201116013,IS201506220)National Natural Science Foundation of China (Grant Nos.40974012,41304019)
文摘In this paper, the relationships of the plunges and azimuths of T and P axes versus the strikes, dips, and rakes of two seismic nodal planes were derived to provide ref- erence for earthquake researchers. The independence of the plunges and azimuths of T, B, and P axes in focal mech- anism solution was discussed, and it was concluded that three parameters, i.e., the azimuths of T, B and P axes, are completely independent. The focal mechanism solution representation based on Euler rotation was introduced, using three Euler angles in place of the plunges and azi- muths of T, B, and P axes, and three focal mechanism solution representations were briefly compared and ana- lyzed in respect of accuracy on the basis of the assumption of rounding; it was concluded that the Euler angle repre- sentation has better accuracy, compared with the azimuth representation and the traditional representation with T, B, and P axes.
文摘An improvement strategy which controls the shift effort and the power summing planetary gear set of steering clutches and brakes have been proposed based on the dynamic model of synchroniser in order to decrease the wear of synchroniser inserts, make gear shift easy and reduce the shock noise for a positive independent mechanical split path transmission which attached an auto- matic shift system when shifting. A kinetics model for the process of synchroniser engagement is built and analyzed in the paper. Thus for optimizing the gear shift process which is divided into three phases a model reference fuzzy self-adaption system is adopted. Through a 6 000 km road experiment, the control strategy has proved feasible and dependable.
文摘IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or downward tailoring on its interpretation for practical IV & V. It contains crucial and encompassing check points and guidelines to analyze the design integrity, without addressing the formalized and the specific criteria for IV & V activities confirming the technical integrity. It is necessary to list up the inspection viewpoint via interpretation of the standard that is practical review points checking design consistency. For fruitful IV & V of Control Element Driving Mechanism Control System (CEDMCS) software for Yonggwang Nuclear Power Plant unit 3 & 4, the specific viewpoints and approach are necessary based on the guidelines of IEEE 1012 to enhance the system quality by considering the level of implementation of the theoretical and the practical IV & V. Additionally IV & V guideline of IEEE 1012 does not specifically provide the concrete measure considering the system characteristics of CEDMCS. This paper provides the seven (7) characteristic criteria for CEDMCS IV & V, and by applying these viewpoints, the design analysis such as function, performance, interface and exception, backward and forward requirement traceability analysis has been conducted. The requirement, design, implementation, and test phase were only considered for IV & V in this project. This article also provides the translation of code to map theoretical verification and validation into practical verification and validation. This paper emphasizes the necessity of the intensive design inspection and walkthrough for requirement phase to resolve the design faults because the IV & V of early phase of SDLC obviously contributes to find out most of critical design inconsistency. Especially for test phase IV & V, it is strongly recommended to prepare the test plan document which is going to be the basis for the test coverage selection and test strategy. This test plan document should be based on the critical characteristics of function and performance of CEDMCS. Also to guarantee the independency of V & V organization participating in this project, and to acquire the full package of design details for IV & V, the systematic approach and efforts with an aspect of management is highlighted among the participants.
