Application of Automatic Water-saving Irrigation System in Roof Gardens

Based on the special site conditions of roof gardens,it was put forward to introduce automatic water-saving irrigation system into the roof garden constructions,such as the solar energy and microcomputer auto water-saving irrigation system,aiming to solve the photosynthetic noon break phenomenon of plants and relieve the stress from high temperature.

Fuzzy Comprehensive Evaluation for Decision Making of Water Saving Irrigation System

A model of fuzzy comprehensive evaluation for water saving irrigation system (WSIS) decision making is proposed based on establishing an index system affected by six kinds of basic factors including qualitative and quantitative indexes. The object function of WSIS is set up by using the concept of fuzzy membership degree, it is to transform characteristic vector matrix into unify membership matrix and extending the least square method to the least of weighted distance square. The optimum weighted membership degree and the inferior weighted membership degree are used to solve the object function. This method effective solves the problem of classify for fuzzy attributive indexes and the problem of optimum for the set of different attributive indexes. A case study shows that the fuzzy comprehensive evaluation model is reasonable and effective in decision making for water saving irrigation system planning.

Essentials of Drip Irrigation System for Saving Water and Nutrients to Plant Roots: As a Guide for Growers

Many regions around the world are characterized by limited water resources, where the average annual per capita renewable water is about 1000 -1700 cubic meters. For instance, in china the problems of water supply are widely known globally. Though, China is facing main problem which is how to distribute water, instead of water shortage in itself. Therefore, restricted resources of water are increasingly stressed in the future by many factors such as excessive clouds of water, pollution and climate change. On the other hand, most studies have been indicated that the agricultural sector is one of the sectors that will face a large water deficit in the future due to the high demand for food, competition for water resources, drought and the high consumption of water due to the acquisition of traditional surface irrigation techniques. In spite of introduce modern irrigation methods such as drip irrigation in agriculture by developing irrigation methods and eliminating old traditional irrigation methods, however, its efficiency is related to the qualifying of farms and users of irrigation water, where they are the main users of irrigation water in water resources management. The considerable challenge facing agriculture is to raise irrigation efficiency depending on water-saving irrigation systems to provide water resources for crops. Therefore, the purpose of this study was to provide farmers with important points about using drip irrigation technology, to raise their technical level in using irrigation water, through their guidance to the best techniques and to avoid some common mistakes in design, utilization, management and maintenance of drip irrigation system.

Assessment of groundwater suitability for different activities in Toshka district,south Egypt

Globally,groundwater has globally emerged as a crucial freshwater source for domestic,irrigation,and industrial needs.The evaluation of groundwater quality in the Toshka region is imperative to ensure its suitability for the extensive agricultural and industrial activities underway in this promising,groundwater-dependent development area.This is particularly significant as Egypt increasingly relies on groundwater reserves to address freshwater deficits and to implement mega-development projects in barren lands.In this study,fifty-two samples were collected from the recently drilled wells tapping into the Nubian Sandstone Aquifer(NSA)in the Toshka region.Groundwater quality was assessed through hydrochemical analysis,Piper diagram,and various indicators such as Na%,SAR,RSC,KR,MH and PI.The hydrochemical analysis revealed improved groundwater quality characteristics,attributed to continuous recharge from Lake Nasser.The Piper diagram categorised most of the water samples as"secondary salinity"water type.Almost all wells proved suitable for irrigation with only two wells unsuitable based on MH values and six wells based on KR values.Considering Total Hardness(TH)values,all samples were classified as"Soft",indicating their suitability for domestic and industrial purposes.Water Quality Index(WQI)results concluded that all samples met WHO and FAO guidelines for drinking and irrigation,respectively.Spatial distribution maps,constructed using GIS,facilitate the interpretation of the results.Regular monitoring of quality parameters is essential to detect any deviation from permissible limits.

Applying Fuzzy Matter-Element Model Based on AHP to Evaluating Bids of Water Saving Irrigation Project

Owing to overcoming the characteristics that there are many economic and technical indexes which are fuzzy and incompatibility to each other in evaluating investment project,a new method is proposed.The method is based on the matter-element analysis and combined with the concepts of fuzzy mathematics,which is called the method of fuzzy matter-element analysis.It constructs the compound fuzzy matter element with the investment projects,evaluation factors and their fuzzy value.Through establishing the best subjection degree (fuzzy value),complex fuzzy matter element of relational coefficient and weight aggregation of fuzzy matter-element model,the writer achieves on optimum order of the investment projects according to the calculated relational degree and finds the best project.In this paper,the calculation of weight adopts the analytical hierarchy process method(AHP).Through the actual example,it shows that the model is simple and its calculation is reliable.It is very significant for the engineering evaluated bid and investment decision.

The Effect of Water Saving and Production Increment by Drip Irrigation Schedules

Drip irrigation system can achieve high uniformity. When the system is designed for uniformity coefficient equal or more than 70%, the water application in the field can be expressed as a normal distribution and further simplified to a linear distribution. This paper will describe the irrigation scheduling parameters, percent of deficit, application efficiency and coefficient of variation by simple mathematical model. Using this effective model and the irrigation application, the total yield affected by the total water application for different uniformity of irrigation application can be determined. More over, this paper uses the cost of water, price of yield, uniformity of the drip irrigation system, crop response to water application and environmental concerns of pollution and contamination to determine the optimal irrigation schedule. A case study shows that the optimal irrigation schedule can achieve the effect of water saving and production increment compared with the conventional irrigation schedule in which the whole field is fully irrigated. Key words drip irrigation - linear cumulative frequency curve - optimal irrigation schedule - water saving - production increment CLC number TV 139.1 Foundation item: Supported by the National Natural Science Foundation of China (59379407)Biography: QIU Yuan-feng (1973-), male, Ph. D, research direction: water saving irrigation theory and techniques.

Flood Reduction Function of Paddy Rice Fields under Different Water Saving Irrigation Techniques

This study is conducted to investigate the function of paddy fields for flood reduction under different water saving irrigation techniques. A daily water balance component data including rainfall, percolation, and overflow through the paddy field levee were collected from experimental paddy rice fields during rainy season cultivation. Results show that paddy field was very effective in flood reduction. More than 40% of rainfall could be stored in the paddy fields. However, the effectiveness of paddy fields in flood reduction was highly depends on the WSI technique used. Semi dry cultivation technique was the most effective one in terms of flood reduction. It retained the rainfall up to 55.7% (365 mm) of the total rainfall (636 mm) without reducing the yield. In terms of flood volume reduction, the alternate wetting and drying performed similarly with traditional continuous flooding, i.e., 37.2% and 40.8%, respectively.

The Potential Contribution of Subsurface Drip Irrigation to Water-Saving Agriculture in the Western USA

Water shortages within the western USA are resulting in the adoption of water-saving agricultural practices within this region. Among the many possible methods for saving water in agriculture, the adoption of subsurface drip irrigation （SDI） provides a potential solution to the problem of low water use efficiency. Other advantages of SDI include reduced NO3 leaching compared to surface irrigation, higher yields, a dry soil surface for improved weed control, better crop health, and harvest flexibility for many specialty crops. The use of SDI also allows the virtual elimination of crop water stress, the ability to apply water and nutrients to the most active part of the root zone, protection of drip lines from damage due to cultivation and tillage, and the ability to irrigate with wastewater while preventing human contact. Yet, SDI is used only on a minority of cropland in the arid western USA. Reasons for the limited adoption of SDI include the high initial capital investment required, the need for intensive management, and the urbanization that is rapidly consuming farmland in parts of the western USA. The contributions of SDI to increasing yield, quality, and water use efficiency have been demonstrated. The two major barriers to SDI sustainability in arid regions are economics （i.e., paying for the SDI system）, including the high cost of installation; and salt accumulation, which requires periodic leaching, specialized tillage methods, or transplanting of seedlings rather than direct-seeding. We will review advances in irrigation management with SDI.

Development Potentials and Benefit Analysis of Efficient Water-saving Irrigation in Lixin County

On the basis of analyzing water resources,crop planning structure,and irrigation mode in Lixin County,potentials and benefits of developing efficient water-saving irrigation in the county were explored to provide references for its future water-saving irrigation.

Analysis and Evaluation of Heavy Metal Environmental Quality of Irrigation Water in Vegetable Farmlands of Shandong Province

[Objective] The aim was to evaluate heavy metal environmental quality of irrigation water in vegetable farmlands of Shandong Province. [Method] Heavy metal contents including Hg,Cd,As,Cr (+6),Pb,Cu and Zn in irrigation water of main vegetable farmlands of Shandong Province were investigated by randomly sampling,and the environmental quality conditions of these heavy metals were evaluated by methods of single quality index and complex quality index. [Result] The results showed that the average contents of heavy metals in irrigation water of Shouguang,Laiyang,Jinxiang and Zhangqiu were all far lower than the limit values prescribed by 'Farmland Environmental Quality Evaluation Standards for Edible Agricultural Products' (HJ332-2006),and no heavy metal was found beyond the limit value in every sample. The single quality indices of the 7 elements in the studied 4 places were all lower than 0.5. The comprehensive quality index of the seven elements was 0.317 8 in Shouguang,0.320 4 in Laiyang,0.232 6 in Jinxiang,and 0.260 7 in Zhangqiu. The environmental quality of irrigation water in the studied four places were all set at the first class. [Conclusion] The environmental quality of irrigation water in the 4 places belonged to clean level and were fit for the plantation of no pollution vegetables.

Effects of deficit irrigation with saline water on spring wheat growth and yield in arid Northwest China

Field experiments were conducted in 2008 and 2009 to study the effects of deficit irrigation with saline water on spring wheat growth and yield in an arid region of Northwest China. Nine treatments included three salinity levels sl, s2 and s3 （0.65, 3.2, and 6.1 dS/m） in combination with three water levels wl, w2 and w3 （375, 300, and 225 mm）. In 2008, for most treatments, deficit irrigation showed adverse effects on wheat growth; meanwhile, the effect of saline irrigation was not apparent. In 2009, growth parameters of wl treatments were not always optimal under saline irrigation. At 3.2 and 6.1 dS/m in 2008, the highest yield was obtained by wl treatments, however, in 2009, the weight of 1,000 grains and wheat yield both followed the order w2 〉 wl 〉 w3. In this study, spring wheat was sensitive to water deficit, especially at the booting to grain-filling stages, but was not significantly affected by saline irrigation and the combination of the two factors. The results demonstrated that 300-mm irrigation water with a salinity of less than 3.2 dS/m is suitable for wheat fields in the study area.

Water-saving Potential in aeolian sand soil under straight tube and surface drip irrigation in Taklimakan Desert in Northwest China

Evaporation loss from the saturated soil beneath drip irrigation emitters highly influences the irrigation efficiency of drip krigation （D1]. Subsurface drip irrigation （SDI） is one good approach to curb this inefficiency, but in a new irrigation method, straight tube irrigation （STI）, the irrigation tubes do not need to be buried and thus STI is recommended to increase the irrigation efficiency under normal surface-applied DI. STI consists of only connectors and water-transference tubes that can directly transfer irrigation water from the lateral emitters in the drip line to the root zone of plants. Five-month field experiments were carried out in aeolian sand soil in the forest-belts of the Taklimakan Desert, which have poor water storage capacity, to compare the potential water saving between STI and DI. The preliminary results showed that, compared with DI, STI （1） improved the soil water content in soil depths from 40 to 100 cm under the soil surface; （2） achieved the same irrigation effects in relatively shorter irrigation durations; （3） had very little water loss due to deep seepage; and （4） formed a layer of dry sand about 10 to 30 cm thick immediately below the soil surface, which lessened evaporation loss of soil water beneath the emitters on the soil surface. This demonstrates that STI can maximize the water-saving potential of DI through the reduction of wetted soil perimeters on the soil surface. This is valuable information for water-saving engineering applications and projects with STI in arid and semiarid regions.

The Application of PPE Model Based on RAGA in Benefit Evaluating of Rice Water Saving

Through applying PPE model based on RAGA to evaluate the benefit of rice water saving,the author turns multi-dimension data into low dimension space.So the optimum projection direction can stand for the best influence on the collectivity.Thus,the value of projection function can evaluate each item good or not.The PPE model can avoid jamming of weight matrix in the method of fuzzy synthesize judgement,and obtain better result.The author wants to provide a new method and thought for readers who are engaged in investment decision-making of water saving irrigation and other relative study.

Demonstration of Center Pivot Uniformity Evaluation and Retrofit to Improve Water Use Efficiency

Agricultural irrigation is a primary user for freshwater withdrawal. Irrigation plays an important role in crop production, as it provides the benefit of reducing the effects of prolonged dryness and erratic precipitation. Center pivot irrigation system is the most common irrigation system in agriculture. As the center pivot irrigation system ages, the system could develop a leaking joint, clogged sprinklers, and physical damage. This can cause areas of non-uniformity that can lead to under- or over-irrigated in some areas of the land, resulting in excess energy use and cost, wasting resources, and environmental impacts. Thus, it is important to evaluate the performance of a center pivot irrigation system regularly to maximize return on investments and minimize wasting resources. This study focuses on evaluating the impacts and benefits of improved center pivot irrigation distribution uniformity by performing distribution uniformity evaluations pre- and post-retrofit. This study also focused on demonstrating an unmanned aerial vehicle (UAV) to assess the performance of the center pivot irrigation system in two irrigated farmlands. The Coefficient of Uniformity (CU), Distribution Uniformity (DU), and Scheduling Coefficient (SC) were calculated based on the catch can test data. The values were utilized to evaluate water and energy savings from the improved coefficients. The team has found that replacing sprinkler packages increased the CU from 78 to 89 and the DU from 77 to 82, and reduced the SC from 1.3 to 1.2 in Field A. In Field B, replacing sprinkler packages increased the CU from 73 to 91 and the DU from 62 to 84 and reduced the SC from 1.6 to 1.2. The estimated water savings in Field A due to the reduced scheduling coefficient was approximately 151,000 liters/hectare/year, with consideration of the corn and soybean rotation field in Michigan. The estimated water savings in Field B was 608,000 liters/hectare/year. The data from this demonstration study showed the value of distribution uniformity evaluation and retrofit of irrigation systems. This information will encourage farmers and agricultural industries to consider performing more distribution uniformity evaluations, ultimately improving irrigation water use efficiency and supporting sustainable water management in agriculture.

A study of groundwater irrigation water quality in south-central Bangladesh: a geo-statistical model approach using GIS and multivariate statistics

Southern Bangladesh＇s irrigation and drinking water is threatened by saline intrusion. This study aimed to establish an irrigation water quality index （IWQI） using a geostatistical model and multivariate indices in Gopalganj district, south-central Bangladesh. Groundwater samples were taken randomly （different depths） in two seasons （wet-monsoon and dry-monsoon）. Hydrochemical analysis revealed groundwater in this area was neutral to slightly alkaline and dominating cations were Na^＋, Mg^2＋, and Ca^2＋ along with major anions Cl^- and HCO3^-. Principal component analysis and Gibbs plot helped explain possible geochemical processes in the aquifer. The irrigation water evaluation indices showed： electrical conductivity （EC） 〉750 μS/cm, moderate to extreme saline; sodium adsorption ratio （SAR）, excellent to doubtful; total hardness （TH）, moderate to very hard; residual sodium bicarbonate, safe to marginal; Kelly＇s ratio 〉1; soluble sodium percentage （SSP）, fair to poor; magnesium adsorption ratio, harmful for soil; and IWQI, moderate to suitable. In addition, the best fitted semivariogram for IWQI, EC, SAR, SSP, and TH confirmed that most parameters had strong spatial dependence and others had moderate to weak spatial dependence. This variation might be due to the different origin/sources of major contributing ions along with the influence of variable river flow and small anthropogenic contributions. Furthermore, the spatial distribution maps for IWQI, EC, SSP, and TH during both seasons confirmed the influence of salinity from the sea; low-flow in the major river system was the driving factor of overall groundwater quality in the study area. These findings may contribute to management of irrigation and/or drinking water in regions with similar groundwater problems.

Technologies for Efficient Use of Irrigation Water and Energy in China

While the shortage of water and energy is a well-recognized worldwide natural resources issue, little attention has been given to irrigation energy efficiency. In this paper, we examine the potential energy savings that can be achieved by implementing improved irrigation technologies in China. The use of improved irrigation management measures such as a flow meter, irrigation scheduling, and/or regular maintenance and upgrades, typically reduces the amount of water pumped over the course of a growing season. The total energy saved by applying these improved measures could reach 20%, as compared with traditional irrigation methods. Two methods of irrigation water conveyance by traditional earth canal and low pressure pipeline irrigation （LPPI） were also evaluated. Our study indicated that LPPI could save 6.48x 109 kWh yr1 when applied to 11 Chinese provinces. Also, the COz emission was reduced by 6.72 metric tons per year. Among these 11 surveyed provinces, the energy saving potential for two provinces, Hebei and Shandong, could reach 1.45 x 109 kWh yr^-1. Using LPPI, potential energy saved and CO2 emissions reduced in the other 20 Chinese provinces were estimated at about 2.97×109 kWh yr-1 and 2.69 metric tons per year, respectively. The energy saving potential for Heilongjiang, a major agriculture province, could reach 1.77× 109 kWh yr-1, which is the largest in all provinces. If LPPI is applied to the entire country, average annual energy saving of more than 9 billion kWh and average annual CO2 emission reduction of more than 9.0 metric tons could be realized. Rice is one of the largest users of the world＇s fresh water resources. Compared with continuous flooding irrigation, intermittent irrigation （ITI） can improve yield and water-use efficiency in paddy fields. The total increments of net output energy and yield by ITI in paddy fields across China could reach 2.5× 1016 calories and l07 tons, respectively. So far only a small part of agricultural land in China has adopted water and energy saving technologies. Therefore, potential water and energy savings in China by adapting improved irrigation technology could be significant and should be carefully studied and applied.

Impact and Health Risk Assessment of Groundwater in the Vicinity of Dumpsites in Keffi Metropolis, Nigeria

This study investigated the hydrogeochemical characteristics of groundwater impacted by waste dumps through computation of different hydrogeological/chemical indices and related health risk assessment of major heavy metals (HVM) in relation to different population groups in Keffi Metropolis. Samples from ten (10) groundwater sources were collected for analysis. Results revealed that the concentration of major cations from the samples was in the order: Ca2+ > Na+ + K+ > Mg2+, while major anionic constituents were in the order: HCO3- > CO32- > SO42- > Cl- > F- respectively. Water quality index (WQI) computed indicated that the groundwater of the study area is not suitable for domestic purposes particularly drinking as some of the parameters exceed the WHO guidelines. Generally, the HVM hazard quotients (HQ) of non-carcinogenic (NC) and carcinogenic toxicity (TC) for both population groups were lower (HQ < 1) indicating that the groundwater within the study areas did not pose current significant risk. Non-carcinogenic risk uncertainty analysis by Monte Carlo simulations (MCS) further indicated that risk levels of HVM in GW were lower (HQ < 1). Despite the findings in this study, it is important that regular monitoring of GW quality is done in order to ensure that water is potable and prevent human health risks.

Geochemical analysis and quality assessment of geothermal water in Gujarat,India

Geothermal water can have a wide range of direct applications,including drinking,domestic use,irrigation and industrial use.This study analyses geothermal water from Dholera,Diu,Gandhar,Kutch,Porbandar,Tulsishyam,and Unai regions located in Gujarat,India,to determine the hydrochemistry for establishing the water's suitability for drinking and irrigation purposes.From each region,three different water samples were collected.For drinking purpose,total eleven water quality parameters such as pH,electrical conductivity,total dissolved solids,calcium,magnesium,sodium,potassium,chloride,sulphate,carbonate and bicarbonate were evaluated.Piper and Durov plots were used to understand the ionic composition and evolution of water.Whereas for irrigation,the parameters such as total dissolved solids,sodium absorption ration,electrical conductivity,and potential salinity were used for water quality check.Wilcox Plot was plotted to understand the sodium and salinity hazard of water.Water quality index and irrigation water quality index were used to assess the water quality for making the analytical procedure easy.The findings indicate that the water samples from the Dholera and Diu areas had extremely high values for both the water quality index and total dissolved solids content.Water in these places may be appropriate for making salt.All the other samples show adequacy for utilization in irrigation purpose.

Cotton's Water Demand and Water-Saving Benefits under Drip Irrigation with Plastic Film Mulch

The primary purpose of this research was to give suitable irrigation program according to the growth period and water requirement.A cotton field experiment with mulched drip irrigation was conducted at the National Field Observation and Research Station for Oasis Farmland Ecosystem in Aksu of Xinjiang in 2008.Water balance method was adopted to study the water requirement and water consumption law of cotton under mulched drip irrigation in Tarim Irrigated Area.Statistical analysis of experimental data of irrigation indicates that the relationship between yield of cotton and irrigation presents a quadratic parabola.We fit the model of cotton water production on the basis of field experimental data of cotton.And the analysis on water saving benefit of cotton under mulched drip irrigation was done.Results indicate that water requirements for the irrigated cotton are 543 mm in Tarim Irrigated Area.The water requirements of seedling stage is 252 mm,budding stage is 186 mm,bolling stage is 316 mm and wadding stage is 139 mm.the irrigation amount determines the spatial distribution of soil moisture and water consumption during cotton life cycle.However,water consumption at different growth stages was inconsistent with irrigation.Quantitatively,the water consumed by cotton decreases upon the increase of irrigation amount.From the perspective of water saving,the maximal water use efficiency can reach 3 091 m3/ha.But the highest cotton yield needs 3464 m3/ha irrigation water.In summary,compared to the conventional drip irrigation,a number of benefits in water saving and yield increase were observed when using plastic mulch.At the same amount of irrigation,the cotton yield with plastic mulch was 30.2% higher than conventional approaches,and the efficiency of water utilization increased by30.2%.While at the same yield level,29.3% water was saved by using plastic mulch,and the efficiency increased by 41.5%.

Characteristics of Drainage Water Quality and Loading from Paddy Field under Cyclic Irrigation and Its Management Options

The cyclic irrigation system has been practiced in Japan for reducing pollutant outflow loadings from paddy fields. The cyclic irrigation is an irrigation method to reuse water by pumping drainage water and re-distributing it to the farmland. Quantification and assessment of the effects of the cyclic irrigation are needed to identify management options for maximizing the benefits of cyclic irrigation. The study was aimed at assessing loading characteristics from paddy field area under the cyclic irrigation and developing a model for simulating water and material flow in paddy field area that can be used as a management tool. The study was carried out in a paddy field in the Asagoi District, Oumihatiman city in Shiga Prefecture, Japan. Using the results of water quality analysis, the average net loadings of T-N and T-P were estimated for both cyclic and non-cyclic irrigation sites. The result indicates a higher nutrient absorption rate in the cyclic irrigation site than that in the non-cyclic irrigation site. The developed cyclic irrigation model showed good agreements between observed and simulated drainage volumes and nitrogen loadings. The scenario analysis by application of the model showed a potential of reducing the loading amount by increasing the cyclic irrigation ratio and reducing the amount of fertilizer application without affecting the rice yield.