To improve the accuracy of indirect tensile strength for a transversely isotropic rock in the Brazilian test, this study considered the three-dimensional (3D) deformation and the nonlinear stress–strain relationship....To improve the accuracy of indirect tensile strength for a transversely isotropic rock in the Brazilian test, this study considered the three-dimensional (3D) deformation and the nonlinear stress–strain relationship. A parametric study of a numerical Brazilian test was performed for a general range of elastic constants, revealing that the 3D modeling evaluated the indirect tensile strength up to 40% higher than the plane stress modeling. For the actual Asan gneiss, the 3D model evaluated the indirect tensile strength up to 10% higher and slightly enhanced the accuracy of deformation estimation compared with the plane stress model. The nonlinearity in stress–strain curve of Asan gneiss under uniaxial compression was then considered, such that the evaluated indirect tensile strength was affected by up to 10% and its anisotropy agreed well with the physical intuition. The estimation of deformation was significantly enhanced. The further validation on the nonlinear model is expected as future research.展开更多
基于离散元法(discrete element method,DEM)建立沥青混合料二维劈裂(indirect tensile,IDT)试验模型,研究集料模型、集料形状、空隙率,以及加载方位角等因素对混合料低温劈裂虚拟试验结果(劈裂强度和最大水平拉应力)的影响。结果表明:...基于离散元法(discrete element method,DEM)建立沥青混合料二维劈裂(indirect tensile,IDT)试验模型,研究集料模型、集料形状、空隙率,以及加载方位角等因素对混合料低温劈裂虚拟试验结果(劈裂强度和最大水平拉应力)的影响。结果表明:沥青混合料低温虚拟劈裂试验时,集料模型对数值模拟计算效率、内部结构中的接触力链和裂纹扩展路径等有很大影响;实际边界模型较等效椭圆形与等效多边形模型其数值模拟结果变异性较小;空隙率大小对劈裂强度及水平向最大拉应力有显著影响,随空隙率的增大两者均有不同程度的减小;不同加载方位角下的劈裂试验数值模拟结果呈各向异性。展开更多
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(Grant No.2023R1 A2C1004298)a grant from the Human Resources Development program(Grant No.20204010600250)of the Korea Institute of Energy Technology Evaluation and Planning(KETEP),funded by the Ministry of Trade,Industry,and Energy of the Korean Government.
文摘To improve the accuracy of indirect tensile strength for a transversely isotropic rock in the Brazilian test, this study considered the three-dimensional (3D) deformation and the nonlinear stress–strain relationship. A parametric study of a numerical Brazilian test was performed for a general range of elastic constants, revealing that the 3D modeling evaluated the indirect tensile strength up to 40% higher than the plane stress modeling. For the actual Asan gneiss, the 3D model evaluated the indirect tensile strength up to 10% higher and slightly enhanced the accuracy of deformation estimation compared with the plane stress model. The nonlinearity in stress–strain curve of Asan gneiss under uniaxial compression was then considered, such that the evaluated indirect tensile strength was affected by up to 10% and its anisotropy agreed well with the physical intuition. The estimation of deformation was significantly enhanced. The further validation on the nonlinear model is expected as future research.
文摘基于离散元法(discrete element method,DEM)建立沥青混合料二维劈裂(indirect tensile,IDT)试验模型,研究集料模型、集料形状、空隙率,以及加载方位角等因素对混合料低温劈裂虚拟试验结果(劈裂强度和最大水平拉应力)的影响。结果表明:沥青混合料低温虚拟劈裂试验时,集料模型对数值模拟计算效率、内部结构中的接触力链和裂纹扩展路径等有很大影响;实际边界模型较等效椭圆形与等效多边形模型其数值模拟结果变异性较小;空隙率大小对劈裂强度及水平向最大拉应力有显著影响,随空隙率的增大两者均有不同程度的减小;不同加载方位角下的劈裂试验数值模拟结果呈各向异性。
