Indirect tension test of epoxy asphalt mixtureusing microstructural finite-element model

A finite-element model of the thermosetting epoxy asphalt mixture（EAM） microstructure is developed to simulate the indirect tension test（IDT）.Image techniques are used to capture the EAM microstructure which is divided into two phases：aggregates and mastic.A viscoelastic constitutive relationship,which is obtained from the results of a creep test,is used to represent the mastic phase at intermittent temperatures.Model simulation results of the stiffness modulus in IDT compare favorably with experimental data.Different loading directions and velocities are employed in order to account for their influence on the modulus and the localized stress of the microstructure model.It is pointed out that the modulus is not consistent when the loading direction changes since the heterogeneous distribution of the mixture internal structure,and the loading velocity affects the localized stress as a result of the viscoelasticity of the mastic.The study results can provide a theoretical basis for the finite-element method,which can be extended to the numerical simulations of asphalt mixture micromechanical behavior.

Correlations between direct and indirect strength test methods

The difficulties associated with performing direct compression strength tests on rocks lead to the development of indirect test methods for the rock strength assessment. Indirect test methods are simple, more economical, less time-consuming, and easily adaptable to the field. The main aim of this study was to derive correlations between direct and indirect test methods for basalt and rhyolite rock types from Carlin trend deposits in Nevada. In the destructive methods, point load index, block punch index, and splitting tensile strength tests are performed. In the non-destructive methods, Schmidt hammer and ultrasonic pulse velocity tests are performed. Correlations between the direct and indirect compression strength tests are developed using linear and nonlinear regression analysis methods. The results show that the splitting tensile strength has the best correlation with the uniaxial compression strength.Furthermore, the Poisson's ratio has no correlation with any of the direct and indirect test results.

Numerical study of fatigue damage of asphalt concrete using cohesive zone model

In order to investigate the fatigue behavior of asphalt concrete, a new numerical approach based on a bi-linear cohesive zone model （CZM） is developed. Integrated with the CZM, a fatigue damage evolution model is established to indicate the gradual degradation of cohesive properties of asphalt concrete under cyclic loading. Then the model is implemented in the finite element software ABAQUS through a user-defined subroutine. Based on the proposed model, an indirect tensile fatigue test is finally simulated. The fatigue lives obtained through numerical analysis show good agreement with laboratory results. Fatigue damage accumulates in a nonlinear manner during the cyclic loading process and damage initiation phase is the major part of fatigue failure. As the stress ratio increases, the time of the steady damage growth stage decreases significantly. It is found that the proposed fatigue damage evolution model can serve as an accurate and efficient tool for the prediction of fatigue damage of asphalt concrete.

Evaluation of fatigue property of asphalt mixtures based on digital image correlation method

In order to evaluate the accumulative of tensile strain in the process of fatigue failure, the digital image correlation（DIC） method was utilized to characterize the tensile strain development of asphalt mixtures in the indirect tensile（IDT）fatigue test. Three typical hot mix asphalt（HMA） mixtures with varying nominal maximum aggregate sizes were tested at four stress levels. During the tests, a digital camera was mounted to capture the displacement/strain fields on the surface of the specimen by recording the real-time change of speckle position. The results indicate that the vertical deformation curve can barely evaluate the fatigue performance accurately due to the non-negligible local deflection near the loading point. However, based on the analysis of strain fields,the optimal fatigue cracking zone is determined as a 40mm×40mm rectangle in the middle of the specimens. Also, a reasonable fatigue model based on the tensile strain curves calculated by DIC is proposed to predict the fatigue lives of asphalt mixtures.

Histopathological Observation of Lymphocystis Disease and Lymphocystis Disease Virus (LCDV) Detection in Cultured Diseased Sebastes schlegeli

Lymphocystis nodules occurring in the cultured sting fish Sebastes schlegeli were observed under light and electron microscope. Lymphocystis disease virus (LCDV) in the tissues of diseased fish was detected with indirect immunofluorescence test (IFAT). Results showed that lymphocystis cells had overly irregular nuclei, basophilic intracytoplasmic inclusion bodies with virions budding from the surface, and hyaline capsules outside the cell membrane. Numerous virus particles about 200 nm in diameter scat- tered in the cytoplasm, electron-dense particles 70-80 nm in diameter filled in perinuclear cisterna, and membrane-enveloped parti- cles with electron-dense core of 70-80 nm appeared around cellular nucleus. IFAT using monoclonal antibody against LCDV from Paralichthys olivaceus revealed that specific green fluorescence was present in the cytoplasm of lymphocystis cells, epithelium of stomach, gill lamellae, and muscular fibers under epidermis of S. schlegeli, just as that in the cytoplasm of lymphocystis cells of P. olivaceus, suggesting the presence of LCDV in these tissues.

Expression of Auto-antiboby in Patients wih Acute Pancreatitis and its Clinical Significance

The expression of an auto-antibody in patients with edematous acute pancreatitis and its possible clinical significance was investiaged. Eighteen cases of acute pancreatitis were chosen as experimental group and 25 subjects served as control group. Venous blood samples were taken in both groups at 4 time points: at the day of admission, the 2nd, 4th and 7th day of hospitalization. By using indirect immuno-fluorescence tests the expression of auto-antibody in the samples was semiquantitatively detected. Other biochemical indexes, such as serum amylase, urine amylase, were determined simultaneously. As well, the clinical signs or symptoms were mornitored. It was found that the expression of the auto-antibody was gradually enhanced with the development of acute pancreatitis. The inceased positive expression of auto-antibody showed a correlationship with the improvement of biochemical indexes (r=0.951) and clinical manifestations (r=0.996). There was significant difference between experimental and control groups (P<0.05). During the recovery period of acute pancreatitis, gradually increased auto-antibody expression was detectable. This antibody is against the interstitial structure of the pancreas.

Calculation of Measurement Uncertainty for Stiffness Modulus of Asphalt Mixture

Asphalt mixture is a highly heterogeneous material, which is one of the reasons for high measurements uncertainty when subjected to tests. The results of such tests are often unreliable, which may lead to making bad professional judgments. They can be avoided by carrying out reliable analyses of measurement uncertainty adequate for the research methods used and conducted before the actual research is done. This paper presents the calculation of measurements uncertainty using as an example--the determination of the stiffness modulus of the asphalt mixture, which, in turn, was accomplished using the indirect tension method. The paper also shows the employment of the basic methods of statistical analysis, such as testing two mean values and conformity tests. Essential concepts in measurements uncertainty have been compiled and the determination of the stiffness module parameters are discussed. It has been demonstrated that the biggest source of error in the stiffness modulus measuring process is the displacement measure. The aim of the research was to find the measurement uncertainty for stiffness modulus by an indirect tensile test and the presentation of examples of the used statistical methods.

Cold In-Place Recycling as a Sustainable Pavement Practice

Pavement rehabilitation and reconstruction methods with CIR （cold in-place recycling） are alternatives that can effectively reduce the high stresses and waste produced by conventional pavement strategies. An attempt was made to predict the performance, particularly low-temperature cracking resistance characteristics of CIR mixtures. These were prepared with the mix design procedure developed at the URI （University of Rhode Island） for the FHWA （Federal Highway Administration） to reduce wide variations in the application of CIR mixtures production. This standard was applied to RAP （reclaimed asphalt pavement） to produce CIR mixtures with CSS-Ih asphalt emulsion as the additive. By adjusting the number of gyrations of the SGC （Superpave gyratory compactor） for compaction, the field density of 130 pcf was represented accurately. To secure a base line, HMA （hot mix asphalt） samples were produced according to the Superpave volumetric mix design procedure. The specimens were tested using the IDT （indirect tensile） tester according to the procedure of AASHTO T 322 procedure at temperatures of-20, -10 and 0 ℃ （-4, 14, and 32°F, respectively）. The obtained results for the creep compliance and tensile strength were used as input data for the MEPDG （mechanistic empirical pavement design guide）. The analysis results indicated that no thermal or low-temperature cracking is expected over the entire analysis period of 20 years for both HMA and CIR mixtures. Thus, it appears that CIR is a sustainable rehabilitation technique which is also suitable for colder climates, and it is recommended to conduct further investigation of load-related distresses such as rutting and fatigue cracking.