Crushing behaviors of buckling-induced metallic meta-lattice structures

Thin-walled lattice materials can be applied as energy absorbers in protective structures of civil defense. In this paper, quasi-static in-plane crushing tests were carried out to investigate the crushing behavior and energy absorption of buckling induced meta-lattice structures (BIMSs) with different central angles made of plastic iron material DT3 and formed by wire cutting technique. Three crushing patterns were revealed and analyzed. The test results clearly show that the initial peak force (IPF), the crushing force efficiency (CFE), the specific energy absorption (SEA) and the mean crushing force (MCF) can be substantially improved by introducing buckling pattern into the straight-walled lattice structure. The MCF of the BIMS was consistently predicted based on the simplified super folding element (SSFE) and the flattening element.

Enhancement of photocatalytic activity by femtosecond-laser induced periodic surface structures of Si

Laser induced periodic surface structures(LIPSS)represent a kind of top down approach to produce highly reproducible nano/microstructures without going for any sophisticated process of lithography.This method is much simpler and cost effective.In this work,LIPSS on Si surfaces were generated using femtosecond laser pulses of 800 nm wavelength.Photocatalytic substrates were prepared by depositing TiO2 thin films on top of the structured and unstructured Si wafer.The coatings were produced by sputtering from a Ti target in two different types of oxygen atmospheres.In first case,the oxygen pressure within the sputtering chamber was chosen to be high(3×10^–2 mbar)whereas it was one order of magnitude lower in second case(2.1×10^–3 mbar).In photocatalytic dye decomposition study of Methylene blue dye it was found that in the presence of LIPSS the activity can be enhanced by 2.1 and 3.3 times with high pressure and low pressure grown TiO2 thin films,respectively.The increase in photocatalytic activity is attributed to the enlargement of effective surface area.In comparative study,the dye decomposition rates of TiO2 thin films grown on LIPSS are found to be much higher than the value for standard reference thin film material Pilkington Activ^TM.

STRAIN INDUCED STRUCTURAL TRANSITION OF INTERFACES AND TWINS IN A HOT－DEFORMED DUAL－PHASE TIAL ALLOY

The structure characteristics of a2/γinterfaces and the features of deformation twins in a quasi-isothermal forged Ti-45Al-10Nb alloy were studied by highresolution transmission electron microscopy. Three types of strain induced a2/γinterfaces and two types of strain induced twin boundaries were identified The most,important features are high density of ledges and the existence of I/3[111] Frank partial dislocation. Mechanisms for the formation these interfaces were proposed Two types of deformation twins were observed These deformation twins always start from the ledges it seems that ledges at interfaces are important features of interfacial structure for the mechanical behavior of alloys.

Microbial Mats in the Mesoproterozoic Carbonates of the North China Platform and Their Potential for Hydrocarbon Generation

The well-preserved Mesoproterozoic succession in the North China platform consists mainly of three iithological associations including peritidal quartz sandstone, shallow marine and lagoonal dark to black shales, and shallow epeiric carbonates, with a total thickness of up to 8 000 m. In addition to well-documented microplants, macroalgae, and microbial buildups, abundant microbially induced sedimentary structures （MISS） and mat-related sediments have been recognized in these rocks. Intensive microbial mat layers and MISS are especially well preserved in the carbonates of the upper Gaoyuzhuang （高于庄） （ca. 1.5 Ga） and lower Wumishan （雾迷山） （ca. 1.45 Ga） formations, indicating diversified microbial activities and a high organic production. In these petrified biomats, putative microbial fossils （both coccoidal and filamentous） and framboidal pyrites have been identified. The abundance of authigenic carbonate minerals in the host rocks, such as, acicular aragonites, rosette barites, radial siderites, ankerites, and botryoidal carbonate cements, suggests authigenic carbonate precipitation from anaerobic oxidation of methane （AOM） under anoxic/euxinic conditions. Warm climate and anoxic/euxinic conditions in the Mesoproterozoic oceans may have facilitated high microbial productivity and organic burial in sediments. Although authigenic carbonate cements may record carbonate precipitation from anaerobic methane oxidation, gas blister （or dome） structures may indicate gas release from active methanogenesis during shallow burial. Bituminous fragments in mat-related carbonates also provide evidence for hydrocarbon generation. Under proper conditions, the Mesoproterozoic mat-rich carbonates will have the potential for hydrocarbon generation and serve as source rocks. On the basis of petrified biomats, a rough estimation suggests that the Mesoproterozoic carbonates of the North China platform might have a hydrocarbon production potential in the order of 10 ×10^8 t.

Blue-green Phosporescent Iridium Complex with Terdentate Ligand

An ionic iridium（Ⅲ） complex[Ir（F2dpyb）（bzdpp）2Cl][OTf]with 1,3-difluoro-4,6-di（2-pyridinyl） benzene（F2dpybH） terdentate ligand and benzyldiphenylphosphine（bzdpp）ligand was synthesized and characterized.The structure of iridium complex was verified by single-crystal X-ray crystallography.It crystallizes in monoclinic,space group P21/n with a =14.3654（7）,b = 23.0026（10）,c = 15.7964（7） A°,β = 97.6029（11）,V= 5173.9（4） A°3,Z = 4,F（000） =2552,Dc = 1.645 Mg/m^3,Mr = 1281.49 and μ = 0.071 mm^-1.The UV-vis absorption and phosphorescence of the complex were discussed.The complex was ＇aggregation induced emission（AIE）＇ active.It exhibited no emission in CH2Cl2 solution but strong blue-green emission in solid state under ultraviolet light excitation.The complex emitted a strong phosphorescence centered at493 nm when doped in PMMA.Its lifetime is 0.755 μs and quantum yield is approximately 0.134.

Gap induced mode evolution under the asymmetric structure in a plasmonic resonator system

The modulation of resonance features in microcavities is important to applications in nanophotonics.Based on the asymmetric whispering-gallery modes(WGMs)in a plasmonic resonator,we theoretically studied the mode evolution in an asymmetric WGM plasmonic system.Exploiting the gap or nano-scatter in the plasmonic ring cavity,the symmetry of the system will be broken and the standing wave in the cavity will be tunable.Based on this asymmetric structure,the output coupling rate between the two cavity modes can also be tuned.Moreover,the proposed method could further be applied for sensing and detecting the position of defects in a WGM system.

In-situ atomic-scale electrically induced ion migration and structural evolution of functional oxides

With the support of the National Natural Science Foundation of China,two original studies by the research group led by Prof.Gu Lin(谷林)and Prof.Zhang Qinghua(张庆华)from the Institute of Physics,Chinese Academy of Sciences demonstrate the in-situ atomic-scale electrically induced

Plasmonic nano-printing: large-area nanoscale energy deposition for efficient surface texturing

The lossy nature of plasmonic wave due to absorption is shown to become an advantage for scaling-up a large area surface nanotexturing of transparent dielectrics and semiconductors by a self-organized sub-wavelength energy deposition leading to an ablation pattern—ripples—using this plasmonic nano-printing.Irreversible nanoscale modifications are delivered by surface plasmon polariton(SPP)using:(i)fast scan and(ii)cylindrical focusing of femtosecond laser pulses for a high patterning throughput.The mechanism of ripple formation on ZnS dielectric is experimentally proven to occur via surface wave at the substrate–plasma interface.The line focusing increase the ordering quality of ripples and facilitates fabrication over wafer-sized areas within a practical time span.Nanoprinting using SPP is expected to open new applications in photo-catalysis,tribology,and solar light harvesting via localized energy deposition rather scattering used in photonic and sensing applications based on re-scattering of SPP modes into far-field modes.

Laser ablation and structuring of CdZnTe with femtosecond laser pulses

We report an experimental investigation on laser ablation and associated surface structuring of CdZnTe by femtosecond Ti:Sa laser pulses(laser wavelengthλ≈800 nm,≈35 fs,10 Hz),in air.By exploiting different static irradiation conditions,the fluence threshold and the incubation effect in CdZnTe are estimated.Interestingly,surface treatment with a low laser fluence(laser pulse energy E≈5-10_μJ)and number of shots(5<N<50)show the formation of well-defined cracks in the central part of the shallow crater,which is likely associated to a different thermal expansion coefficients of Te inclusions and matrix during the sample heating and cooling processes ensuing femtosecond laser irradiation.Irradiation with a larger number of pulses(N≈500,1000)with higher pulse energies(E≈30-50μJ)results in the formation of welldefined laser-induced periodic surface structures(LIPSS)in the outskirts of the main crater,where the local fluence is well below the material ablation threshold.Both low spatial frequency and high spatial frequency LIPSS perpendicular to the laser polarization are found together and separately depending on the irradiation condition.These are ascribed to a process of progressive aggregation of randomly distributed nanoparticles produced during laser ablation of the deep crater in the region of the target irradiated by a fluence below the ablation threshold with many laser pulses.