Offshore high-grade limemud resources of west coast of India:Economic potential and industrial applications

Limestone is one of the essential raw materials in the cement,paint,steel,ceramic,glass,chemical,pharmaceutical,paper,and fertilizer industries.In India,only 8%of the limestone resources are placed under the reserve category,of which 97%is of cement grade.Thus,India depends on imports to bridge the demand‐supply gap of steel,blast furnace,and chemical‐grade limestone.Efforts of Geological Survey of India(GSI)to locate alternate sources for limestone led to the discovery of enormous quantities of carbonate minerals called limemud from the continental shelf margin of the west coast of India.GSI carried out systematic studies to explore the nature of the disposition,quality,quantity,and suitability of the offshore limemud for various industrial applications.A preliminary estimate of resources using high‐resolution subbottom profiling and sediment core sample studies established the occurrence of more than 172 billion tonnes of high‐grade(The content of CaCO3 is greater than 80 wt%)limemud in 0.4–28.0m thick stratified sediment layers spread over an area of 18000 km2.Chemical,physical,mineralogical,beneficiation,and agglomeration studies found the offshore limemud as a potential replacement for limestone in the cement,filler,blast furnace,steel melting shop,lime production,paint,and Grade‐I steel industries.An assessment of mining and transportation costs indicates that the offshore limemud(USD 5–6/ton)is more cost‐effective than that imported from other countries(USD16‐18/ton).With several advantageous factors like low impurity,mode of occurrence in overburden‐free stratified form,fine‐grained slurry nature,and shallow water depth,sustainable mining of offshore limemud could be a future reality with controllable technological,economic,and environmental challenges.

Characteristics of particulate-bound polycyclic aromatic hydrocarbons emitted from industrial grade biomass boilers

Polycyclic aromatic hydrocarbons（PAHs） are carcinogenic or mutagenic and are important toxic pollutants in the flue gas of boilers. Two industrial grade biomass boilers were selected to investigate the characteristics of particulate-bound PAHs： one biomass boiler retro-fitted from an oil boiler（BB1） and one specially designed（BB2） biomass boiler. One coal-fired boiler was also selected for comparison. By using a dilution tunnel system, particulate samples from boilers were collected and 10 PAH species were analyzed by gas chromatography–mass spectrometry（GC–MS）. The total emission factors（EFs） of PAHs ranged from 0.0064 to0.0380 mg/kg, with an average of 0.0225 mg/kg, for the biomass boiler emission samples. The total PAH EFs for the tested coal-fired boiler were 1.8 times lower than the average value of the biomass boilers. The PAH diagnostic ratios for wood pellets and straw pellets were similar.The ratio of indeno（1,2,3-cd）pyrene/[indeno（1,2,3-cd）pyrene ＋ benzo（g,h,i）perylene] for the two biomass boilers was lower than those of the reference data for other burning devices, which can probably be used as an indicator to distinguish the emission of biomass boilers from that of industrial coal-fired boilers and residential stoves. The toxic potential of the emission from wood pellet burning was higher than that from straw pellet burning, however both of them were much lower than residential stove exhausts.

Further Information of the Associated Li Deposits in the No.6 Coal Seam at Jungar Coalfield, Inner Mongolia, Northern China

Total 138 coal samples and 14 parting samples were taken from the No. 6 Seam of the Jungar Coalfield, Inner Mongolia. These samples were analysed by optical microscopy, sequential chemical extraction procedure （SCEP）, inductively coupled plasma mass spectrometry （ICP-MS）, X-ray powder diffraction （XRD）, and scanning electron microscope in conjunction with an energy-dispersive X-ray spectrometer （SEM-EDX） analysis. The results indicate that the Li contents have reached the industrial grade of the coal associated Li deposit, and the total Li reserves have reached 2406600 tons, that is, 5157000 tons Li2O in the No. 6 seam in the Jungar Coalfield. The sequential chemical extraction procedure results suggest that the Li concentration is mainly related to inorganic matter. The minerals in the coals consist of kaolinite, boehmite, chlorite-group mineral, quartz, calcite, pyrite, siderite and amorphous clay material. Some Li could be absorbed by clay minerals in the Li-bearing coal seam. The chlorite phase？could be？most likely the host for a part of Li. The Yinshan Oldland should be the most possible source of Li of the coal.

The development road of ammonium phosphate fertilizer in China

Ammonium phosphate fertilizer is the compounds containing nitrogen and phosphorus that are usually produced through the neutralization reaction of phosphoric acid and ammonia.At present,there are a variety of products,such as slurry monoammonium phosphate(MAP),diammonium phosphate(DAP),industrial grade MAP,water soluble MAP,water soluble ammonium polyphosphate(APP)and so on.After more than 60 years of development,China’s ammonium phosphate fertilizer industry has experienced the road of from scratch and from weak to strong.The successful development of the slurry MAP technology ended the history that the high concentration phosphate fertilizer cannot be produced by using the medium and low grade phosphate ore.The continuous,stable and large-scale production of DAP plant provides sufficient guarantee for DAP products in China.The development of new ammonium phosphate fertilizer products,such as industrial grade MAP,water soluble MAP,water soluble APP,provides technical support for the transformation and upgrading of phosphorus chemical enterprises.In this paper,the production methods,the development history and the latest research progress of ammonium phosphate fertilizers were reviewed.

Qinghai 100 Billion Yuan Grade Lithium Battery Industrial Base will Emerge Soon

According to the latest figure supplied by Qinghai Province Economic and Informatization Commission,between January and August this year,Qinghai’s output of lithium carbonate is 7530 tonnes,output of cathode material is 5600 tonnes,output of lithium battery reaches 960MWh.As the scale of lithium battery industry fulfilled rapid expansion,Qinghai’s vision to build 100