Taking the actual project of teaching and researching process for example, the relationship between the industrial engineering and product development is discussed. And use the novel visualization technology to suppor...Taking the actual project of teaching and researching process for example, the relationship between the industrial engineering and product development is discussed. And use the novel visualization technology to support the industrial engineering and product development. How to use the new computer modeling and simulating technologies to support the product development and industrial engineering, is introduced especially. The support includes both domestic products and industrial systems. The visualization and computer technologies take a very impo[tant role in some system or multi-direction modeling, those technologies mentioned above can help the industrial engineers study the effect of design on the whole life circle, including the producing steps. So the engineers can avoid making the wrong decision which may cause bad effects on the whole industrial engineering.展开更多
Compaction processes are one the most important par ts of powder forming technology. The main applications are focused on pieces for a utomotive, aeronautic, electric and electronic industries. The main goals of the c...Compaction processes are one the most important par ts of powder forming technology. The main applications are focused on pieces for a utomotive, aeronautic, electric and electronic industries. The main goals of the compaction processes are to obtain a compact with the geometrical requirements, without cracks, and with a uniform distribution of density. Design of such proc esses consist, essentially, in determine the sequence and relative displacements of die and punches in order to achieve such goals. A.B. Khoei presented a gener al framework for the finite element simulation of powder forming processes based on the following aspects; a large displacement formulation, centred on a total and updated Lagrangian formulation; an adaptive finite element strategy based on error estimates and automatic remeshing techniques; a cap model based on a hard ening rule in modelling of the highly non-linear behaviour of material; and the use of an efficient contact algorithm in the context of an interface element fo rmulation. In these references, the non-linear behaviour of powder was adequately desc ribed by the cap plasticity model. However, it suffers from a serious deficiency when the stress-point reaches a yield surface. In the flow theory of plasticit y, the transition from an elastic state to an elasto-plastic state appears more or less abruptly. For powder material it is very difficult to define the locati on of yield surface, because there is no distinct transition from elastic to ela stic-plastic behaviour. Results of experimental test on some hard met al powder show that the plastic effects were begun immediately upon loading. In such mater ials the domain of the yield surface would collapse to a point, so making the di rection of plastic increment indeterminate, because all directions are normal to a point. Thus, the classical plasticity theory cannot deal with such materials and an advanced constitutive theory is necessary. In the present paper, the constitutive equations of powder materials will be discussed via an endochronic theory of plasticity. This theory provides a unifi ed point of view to describe the elastic-plastic behaviour of material since it places no requirement for a yield surface and a ’loading function’ to disting uish between loading an unloading. Endochronic theory of plasticity has been app lied to a number of metallic materials, concrete and sand, but to the knowledge of authors, no numerical scheme of the model has been applied to powder material . In the present paper, a new approach is developed based on an endochronic rate independent, density-dependent plasticity model for describing the isothermal deformation behavior of metal powder at low homologous temperature. Although the concept of yield surface has not been explicitly assumed in endochronic theory, it is shown that the cone-cap plasticity yield surface (Fig.1), which is the m ost commonly used plasticity models for describing the behavior of powder materi al can be easily derived as a special case of the proposed endochronic theory. Fig.1 Trace of cone-cap yield function on the meridian pl ane for different relative density As large deformation is observed in powder compaction process, a hypoelastic-pl astic formulation is developed in the context of finite deformation plasticity. Constitutive equations are stated in unrotated frame of reference that greatly s implifies endochronic constitutive relation in finite plasticity. Constitutive e quations of the endochronic theory and their numerical integration are establish ed and procedures for determining material parameters of the model are demonstra ted. Finally, the numerical schemes are examined for efficiency in the model ling of a tip shaped component, as shown in Fig.2. Fig.2 A shaped tip component. a) Geometry, boundary conditio n and finite element mesh; b) density distribution at final stage of展开更多
Air quality model can be an adequate tool for future air quality prediction, also atmospheric observations supporting and emission control strategies responders. The influence of emission control policy (emission red...Air quality model can be an adequate tool for future air quality prediction, also atmospheric observations supporting and emission control strategies responders. The influence of emission control policy (emission reduction targets in the national "China's 12th Five-Year Plan (2011-2015)") on the air quality in the near future over an important industrial city of China, Xuanwei in Yunnan Province, was studied by applying the AERMOD modeling system. First, our analysis demonstrated that the AERMOD modeling system could be used in the air quality simulation in the near future for SO2 and NOx under average meteorology but not for PM10. Second, after evaluating the simulation results in 2008 and 2015, ambient concentration of SO2, NOx and PM10 (only 2008) were all centered in the middle of simulation area where the emission sources concentrated, and it is probably because the air pollutions were source oriented. Last but not least, a better air quality condition will happen under the hypothesis that the average meteorological data can be used in near future simulation. However, there are still heavy polluted areas where ambient concentrations will exceed the air quality standard in near future. In spatial allocation, reduction effect of SO2 is more significant than NOx in 2015 as the contribution of SO2 from industry is more than NOx. These results inspired the regulatory applications of AERMOD modeling system in evaluating environmental pollutant control policy展开更多
In this study, we investigate the impact factors on air pollution in terms of CO2, SO2 and NOx emissions simultaneously in China and compare changes in air pollution across provinces from 1998 to 2011 using a Multiple...In this study, we investigate the impact factors on air pollution in terms of CO2, SO2 and NOx emissions simultaneously in China and compare changes in air pollution across provinces from 1998 to 2011 using a Multiple Indicators and Multiple Causes Model (MIMIC) within a Structural Equation Model (SEM) framework. Our findings reveal that GDP per capita and total population have the largest impacts on air pollution, followed by energy intensity, foreign direct investment, population density, and industrialization. The results also reveal that the inverted U-shaped Environmental Kuznets Curve (EKC) hypothesis exists in China. Our findings also demonstrate that Shandong, Jiangxi and Liaoning are the top three provinces with the most deteriorated air quality while Xinjiang, Fujian and Ningxia are with the best. These results not only contribute to advancing the existing literature, but also merit particular attention from policy-makers in China.展开更多
This study investigates the sustainability implications of the theoretical models of industrialization and urbanization pioneered by Dixit and Stiglitz^(1) so to open the theoretical “black box” of the unsustainabil...This study investigates the sustainability implications of the theoretical models of industrialization and urbanization pioneered by Dixit and Stiglitz^(1) so to open the theoretical “black box” of the unsustainability of the traditional industrialization mode, and shows how to reshape the relationship between the environment and development under the paradigm of ecological civilization. It finds that the theoretical models that “perfectly” simulate the traditional industrialization mode all have the implicit consequence of environmental unsustainability. Nonetheless, this limitation is not due to the problems of the models themselves but is more a result of the limitations of the traditional developmental and neoclassical economics paradigms of the industrial era. Therefore, the consequences of unsustainability cannot simply be avoided through external policies such as technological progress and environmental regulations, nor can they be prevented by simply adjusting some parameters in these theoretical models. Instead, a shift is required in both the developmental and the economics paradigms formed in the traditional industrial era. From an ecological civilization perspective, this study rethinks the basic issues of economics along the two lines of the ends(what) and the means(how) of development;briefly reviews the history of economic thought;and uses a conceptual framework to reorganize the relevant intellectual profundities that are neglected in standard neoclassical economics. The study further formalizes the conceptual framework in a general form model and shows how a paradigm shift in development could shift the trade-offs from the multiple goals of the economy, the environment, and well-being in the traditional industrial era to mutual reinforcement in ecocivilization.展开更多
文摘Taking the actual project of teaching and researching process for example, the relationship between the industrial engineering and product development is discussed. And use the novel visualization technology to support the industrial engineering and product development. How to use the new computer modeling and simulating technologies to support the product development and industrial engineering, is introduced especially. The support includes both domestic products and industrial systems. The visualization and computer technologies take a very impo[tant role in some system or multi-direction modeling, those technologies mentioned above can help the industrial engineers study the effect of design on the whole life circle, including the producing steps. So the engineers can avoid making the wrong decision which may cause bad effects on the whole industrial engineering.
文摘Compaction processes are one the most important par ts of powder forming technology. The main applications are focused on pieces for a utomotive, aeronautic, electric and electronic industries. The main goals of the compaction processes are to obtain a compact with the geometrical requirements, without cracks, and with a uniform distribution of density. Design of such proc esses consist, essentially, in determine the sequence and relative displacements of die and punches in order to achieve such goals. A.B. Khoei presented a gener al framework for the finite element simulation of powder forming processes based on the following aspects; a large displacement formulation, centred on a total and updated Lagrangian formulation; an adaptive finite element strategy based on error estimates and automatic remeshing techniques; a cap model based on a hard ening rule in modelling of the highly non-linear behaviour of material; and the use of an efficient contact algorithm in the context of an interface element fo rmulation. In these references, the non-linear behaviour of powder was adequately desc ribed by the cap plasticity model. However, it suffers from a serious deficiency when the stress-point reaches a yield surface. In the flow theory of plasticit y, the transition from an elastic state to an elasto-plastic state appears more or less abruptly. For powder material it is very difficult to define the locati on of yield surface, because there is no distinct transition from elastic to ela stic-plastic behaviour. Results of experimental test on some hard met al powder show that the plastic effects were begun immediately upon loading. In such mater ials the domain of the yield surface would collapse to a point, so making the di rection of plastic increment indeterminate, because all directions are normal to a point. Thus, the classical plasticity theory cannot deal with such materials and an advanced constitutive theory is necessary. In the present paper, the constitutive equations of powder materials will be discussed via an endochronic theory of plasticity. This theory provides a unifi ed point of view to describe the elastic-plastic behaviour of material since it places no requirement for a yield surface and a ’loading function’ to disting uish between loading an unloading. Endochronic theory of plasticity has been app lied to a number of metallic materials, concrete and sand, but to the knowledge of authors, no numerical scheme of the model has been applied to powder material . In the present paper, a new approach is developed based on an endochronic rate independent, density-dependent plasticity model for describing the isothermal deformation behavior of metal powder at low homologous temperature. Although the concept of yield surface has not been explicitly assumed in endochronic theory, it is shown that the cone-cap plasticity yield surface (Fig.1), which is the m ost commonly used plasticity models for describing the behavior of powder materi al can be easily derived as a special case of the proposed endochronic theory. Fig.1 Trace of cone-cap yield function on the meridian pl ane for different relative density As large deformation is observed in powder compaction process, a hypoelastic-pl astic formulation is developed in the context of finite deformation plasticity. Constitutive equations are stated in unrotated frame of reference that greatly s implifies endochronic constitutive relation in finite plasticity. Constitutive e quations of the endochronic theory and their numerical integration are establish ed and procedures for determining material parameters of the model are demonstra ted. Finally, the numerical schemes are examined for efficiency in the model ling of a tip shaped component, as shown in Fig.2. Fig.2 A shaped tip component. a) Geometry, boundary conditio n and finite element mesh; b) density distribution at final stage of
基金supported by the special research projects of Yunnan Provincial Environmental Protection Bureau(No. KKK0201022137, KKK0201122183)
文摘Air quality model can be an adequate tool for future air quality prediction, also atmospheric observations supporting and emission control strategies responders. The influence of emission control policy (emission reduction targets in the national "China's 12th Five-Year Plan (2011-2015)") on the air quality in the near future over an important industrial city of China, Xuanwei in Yunnan Province, was studied by applying the AERMOD modeling system. First, our analysis demonstrated that the AERMOD modeling system could be used in the air quality simulation in the near future for SO2 and NOx under average meteorology but not for PM10. Second, after evaluating the simulation results in 2008 and 2015, ambient concentration of SO2, NOx and PM10 (only 2008) were all centered in the middle of simulation area where the emission sources concentrated, and it is probably because the air pollutions were source oriented. Last but not least, a better air quality condition will happen under the hypothesis that the average meteorological data can be used in near future simulation. However, there are still heavy polluted areas where ambient concentrations will exceed the air quality standard in near future. In spatial allocation, reduction effect of SO2 is more significant than NOx in 2015 as the contribution of SO2 from industry is more than NOx. These results inspired the regulatory applications of AERMOD modeling system in evaluating environmental pollutant control policy
文摘In this study, we investigate the impact factors on air pollution in terms of CO2, SO2 and NOx emissions simultaneously in China and compare changes in air pollution across provinces from 1998 to 2011 using a Multiple Indicators and Multiple Causes Model (MIMIC) within a Structural Equation Model (SEM) framework. Our findings reveal that GDP per capita and total population have the largest impacts on air pollution, followed by energy intensity, foreign direct investment, population density, and industrialization. The results also reveal that the inverted U-shaped Environmental Kuznets Curve (EKC) hypothesis exists in China. Our findings also demonstrate that Shandong, Jiangxi and Liaoning are the top three provinces with the most deteriorated air quality while Xinjiang, Fujian and Ningxia are with the best. These results not only contribute to advancing the existing literature, but also merit particular attention from policy-makers in China.
基金This study is sponsored by the RIEco Innovation Project"Economics in the Perspective of Ecocivilization and Its Policy Implications"(2022STSA02)at Chinese Academy of Social Sciences.
文摘This study investigates the sustainability implications of the theoretical models of industrialization and urbanization pioneered by Dixit and Stiglitz^(1) so to open the theoretical “black box” of the unsustainability of the traditional industrialization mode, and shows how to reshape the relationship between the environment and development under the paradigm of ecological civilization. It finds that the theoretical models that “perfectly” simulate the traditional industrialization mode all have the implicit consequence of environmental unsustainability. Nonetheless, this limitation is not due to the problems of the models themselves but is more a result of the limitations of the traditional developmental and neoclassical economics paradigms of the industrial era. Therefore, the consequences of unsustainability cannot simply be avoided through external policies such as technological progress and environmental regulations, nor can they be prevented by simply adjusting some parameters in these theoretical models. Instead, a shift is required in both the developmental and the economics paradigms formed in the traditional industrial era. From an ecological civilization perspective, this study rethinks the basic issues of economics along the two lines of the ends(what) and the means(how) of development;briefly reviews the history of economic thought;and uses a conceptual framework to reorganize the relevant intellectual profundities that are neglected in standard neoclassical economics. The study further formalizes the conceptual framework in a general form model and shows how a paradigm shift in development could shift the trade-offs from the multiple goals of the economy, the environment, and well-being in the traditional industrial era to mutual reinforcement in ecocivilization.