Aiming at high requirements of temperature measurement system in high temperature,high pressure,highly corrosive and other special environments,a temperature acquisition system based on field-programmable gate array(F...Aiming at high requirements of temperature measurement system in high temperature,high pressure,highly corrosive and other special environments,a temperature acquisition system based on field-programmable gate array(FPGA) which is the controller of the system is designed.Also a Flash memory is used as the memory and an erosion thermocouple is used as sensor of the system.Compared with the traditional system using complex programmable logic device(CPLD)and microcontroller unit(MCU)as the main body,this system has some advantages,such as short response time,small volume,no loss of data once power is off,high precision,stability and reliability.And the sensor of the system can be reused.In this paper,boiling water experiment is used to verify accuracy of the system.The millisecond level signal from firecrackers is for verifying the stability and fast response characteristics of the system.The results of experiment indicate that the temperature measurement system is more suitable for the field of explosion and other environments which have high requirements for the system.展开更多
To diagnose the lining condition of the blast furnace hearth during its campaign, are widely used methods based on the analysis of the temperature characteristics of the refractory lining. Measurement of the temperatu...To diagnose the lining condition of the blast furnace hearth during its campaign, are widely used methods based on the analysis of the temperature characteristics of the refractory lining. Measurement of the temperature characteristics is performed by means of a few hundred thermocouples placed inside the refractory lining. The peculiarity of proposed and used mathematical models is a fully three-dimensional assessment of the refractory lining, presence mechanisms of adaptation to the actual thermal conductivity of refractories and optimization calculations to the work in the on-line mode. The new monitoring systems of the lining wear of the blast furnace hearth are established on 5 blast furnaces of integrated iron-and-steel works of China： No.4 by volume 3,200 m3 of “Jinan Iron ＆ Steel Company” in Jinan （683 thermocouples）, No.2 by volume 1,080 m3 of “Henan Jiyuan Iron ＆ Steel （Group） Company” in Jiyuan （212 thermocouples）, No.4 by volume 2,500 m3 of “Guangxi Liuzhou Iron ＆ Steel （Group） Company” in Liuzhou （383 thermocouples）, No.3 by volume 1,750 m3 of “Jinan Iron ＆ Steel Company” in Jinan （524 thermocouples）; No.1 by volume 1,750 m3 of “Jinan Iron ＆ Steel Company” in Jinan （524 thermocouples）.展开更多
基金Natural Science Foundation of Shanxi Province(No. 2009011023)
文摘Aiming at high requirements of temperature measurement system in high temperature,high pressure,highly corrosive and other special environments,a temperature acquisition system based on field-programmable gate array(FPGA) which is the controller of the system is designed.Also a Flash memory is used as the memory and an erosion thermocouple is used as sensor of the system.Compared with the traditional system using complex programmable logic device(CPLD)and microcontroller unit(MCU)as the main body,this system has some advantages,such as short response time,small volume,no loss of data once power is off,high precision,stability and reliability.And the sensor of the system can be reused.In this paper,boiling water experiment is used to verify accuracy of the system.The millisecond level signal from firecrackers is for verifying the stability and fast response characteristics of the system.The results of experiment indicate that the temperature measurement system is more suitable for the field of explosion and other environments which have high requirements for the system.
文摘To diagnose the lining condition of the blast furnace hearth during its campaign, are widely used methods based on the analysis of the temperature characteristics of the refractory lining. Measurement of the temperature characteristics is performed by means of a few hundred thermocouples placed inside the refractory lining. The peculiarity of proposed and used mathematical models is a fully three-dimensional assessment of the refractory lining, presence mechanisms of adaptation to the actual thermal conductivity of refractories and optimization calculations to the work in the on-line mode. The new monitoring systems of the lining wear of the blast furnace hearth are established on 5 blast furnaces of integrated iron-and-steel works of China： No.4 by volume 3,200 m3 of “Jinan Iron ＆ Steel Company” in Jinan （683 thermocouples）, No.2 by volume 1,080 m3 of “Henan Jiyuan Iron ＆ Steel （Group） Company” in Jiyuan （212 thermocouples）, No.4 by volume 2,500 m3 of “Guangxi Liuzhou Iron ＆ Steel （Group） Company” in Liuzhou （383 thermocouples）, No.3 by volume 1,750 m3 of “Jinan Iron ＆ Steel Company” in Jinan （524 thermocouples）; No.1 by volume 1,750 m3 of “Jinan Iron ＆ Steel Company” in Jinan （524 thermocouples）.
