JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and qualit...JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and quality certificate of direct-bonded magnesite-chrome bricks for building materials industry. This standard is applicable to the direct-bonded magnesite-chrome bricks for cement kiln, glass melting tank and other industrial furnaces.2 Normative ReferencesGB 2997: Test method for the apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5070: Chemical analysis method for magnesite-Chrome refractoriesGB 5072: Test method for cold crushing strength of dense shaped refractory productsGB 5989: Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320: Test method for thermal expansion of refractory productsGB 7321: Sample preparation for testing of dense shaped refractory productsGB 10324: Type definition of refractory productsGB 10325: Piling, sampling, acceptance, storage and transportation of refractory products展开更多
The heat transfer analysis was performed for an AC electric arc furnace (EAF). Heat losses by conduction, convection and radiation from outer surface, roof, bottom and electrodes of EAF were determined in detail. Some...The heat transfer analysis was performed for an AC electric arc furnace (EAF). Heat losses by conduction, convection and radiation from outer surface, roof, bottom and electrodes of EAF were determined in detail. Some suggestions about decreasing heat losses were presented.展开更多
This is a historical compilation and analysis of the world-wide development of kilns and furnaces, covering those ones ranging from ancient earthenware kilns to modern high-tech furnaces、 including nuclear reactors a...This is a historical compilation and analysis of the world-wide development of kilns and furnaces, covering those ones ranging from ancient earthenware kilns to modern high-tech furnaces、 including nuclear reactors and fuel cells. Special emphasis is on energy conservation and environmental protection. the historical lessons from which can be applied to future activities.展开更多
A new coating on lining in industrial furnace for energy saving has been developed. Properties and microstructure of the coatings were revealed by emissivity instrument,X-ray diffraction （XRD）,transmission electron ...A new coating on lining in industrial furnace for energy saving has been developed. Properties and microstructure of the coatings were revealed by emissivity instrument,X-ray diffraction （XRD）,transmission electron microscope （TEM） and scanning electron microscope （SEM）,respectively. The result indicates that the emissivity of coatings is higher than 0.90 and the thickness of coatings is about 200 μm. ZrO2,Cr2O3 and SiC in the coating benefit practical applications of coatings at high temperature with durable high emissivity and the continuous structure between the coatings and the substrate makes the coatings high cohesion and excellent adhesion for both specimens with and without sintering at high temperature. Result from laboratory experiment shows that the heating speed of specimen with coating is higher than that of controlled specimen and the temperature increases 30°C during the heating. The average temperature drop of specimen with coatings has a 13.5% improvement in the cooling speed. The application of coatings on the checker brick in a blast furnace of 1750m^3 indicates that the coating causes the blast temperature to an average increase of 28°C,reduces the fluctuation of blast temperature before the blowing-in and leads to a fuel saving of 10% approximately.展开更多
文摘JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and quality certificate of direct-bonded magnesite-chrome bricks for building materials industry. This standard is applicable to the direct-bonded magnesite-chrome bricks for cement kiln, glass melting tank and other industrial furnaces.2 Normative ReferencesGB 2997: Test method for the apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5070: Chemical analysis method for magnesite-Chrome refractoriesGB 5072: Test method for cold crushing strength of dense shaped refractory productsGB 5989: Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320: Test method for thermal expansion of refractory productsGB 7321: Sample preparation for testing of dense shaped refractory productsGB 10324: Type definition of refractory productsGB 10325: Piling, sampling, acceptance, storage and transportation of refractory products
文摘The heat transfer analysis was performed for an AC electric arc furnace (EAF). Heat losses by conduction, convection and radiation from outer surface, roof, bottom and electrodes of EAF were determined in detail. Some suggestions about decreasing heat losses were presented.
文摘This is a historical compilation and analysis of the world-wide development of kilns and furnaces, covering those ones ranging from ancient earthenware kilns to modern high-tech furnaces、 including nuclear reactors and fuel cells. Special emphasis is on energy conservation and environmental protection. the historical lessons from which can be applied to future activities.
基金the Innovation Fund for Technology Based Firms (No06C26213701371)Natural Science Foundation of Shandong Province in China (NoY2006F26)
文摘A new coating on lining in industrial furnace for energy saving has been developed. Properties and microstructure of the coatings were revealed by emissivity instrument,X-ray diffraction （XRD）,transmission electron microscope （TEM） and scanning electron microscope （SEM）,respectively. The result indicates that the emissivity of coatings is higher than 0.90 and the thickness of coatings is about 200 μm. ZrO2,Cr2O3 and SiC in the coating benefit practical applications of coatings at high temperature with durable high emissivity and the continuous structure between the coatings and the substrate makes the coatings high cohesion and excellent adhesion for both specimens with and without sintering at high temperature. Result from laboratory experiment shows that the heating speed of specimen with coating is higher than that of controlled specimen and the temperature increases 30°C during the heating. The average temperature drop of specimen with coatings has a 13.5% improvement in the cooling speed. The application of coatings on the checker brick in a blast furnace of 1750m^3 indicates that the coating causes the blast temperature to an average increase of 28°C,reduces the fluctuation of blast temperature before the blowing-in and leads to a fuel saving of 10% approximately.
