The Characteristics of Dielectric Barrier Discharge and its Influence on the Excimer XeCl Emission

In this work, the influence of discharge modes on the excimer XeCl emission (308 nm) has been studied by adding helium gas into the xenon and chlorine mixture. It is found that the transition from filament discharge to glow /filament - combined discharge leads to the decrease in excimer emission. We are the first one to use a flowing water film as an outer transparent electrode, and achieve a higher UV intensity, compared with the case by using a metal mesh as the outer electrode. The influence of the gas temperature both in the reactor Tg and in a discharge channel Tc on the excimer emission has been analyzed preliminarily. Finally, it has been expected that the replacement of chlorine gas Cl2 by another chlorine gas may reduce the heat generated in the discharge processes and give rise to the excimer XeCl* radiation.

Characteristics of Authigenic Pyrite and its Sulfur Isotopes Influenced by Methane Seep--Taking the Core A at Site 79 of the Middle Okinawa Trough as an Example

Objective Authigenic pyrite often develops extensively in marine sediments,which is an important product of sulfate reduction in an anoxic environment.It has a specific appearance and complicated sulfur isotopic properties,and acts as important evidence of methane seep in marine sediments.Strong AOM（anaerobic oxidation of methane）activity has developed in the Okinawa Trough.

Influence of Post-Annealing on Electrical Characteristics of Thin-Film Transistors with Atomic-Layer-Deposited ZnO-Channel/Al_2O_3-Dielectric

High-performance thin-film transistors （TFTs） with a low thermal budget are highly desired for flexible electronic applications. In this work, the TFTs with atomic layer deposited ZnO-channel/Al2O3-dielectric are fabricated under the maximum process temperature of 200℃. First, we investigate the effect of post-annealing environment such as N2, H2-N2 （4%） and O2 on the device performance, revealing that o2 annealing can greatly enhance the device performance. Further, we compare the influences of annealing temperature and time on the device performance. It is found that long anneMing at 200℃is equivalent to and even outperforms short annealing at 300℃. Excellent electrical characteristics of the TFTs are demonstrated after 02 anneMing at 200℃ for 35 rain, including a low off-current of 2.3 × 10-13 A, a small sub-threshold swing of 245 m V/dec, a large on/off current ratio of 7.6×10s, and a high electron effective mobility of 22.1cm2/V.s. Under negative gate bias stress at -10 V, the above devices show better electrical stabilities than those post-annealed at 300℃. Thus the fabricated high-performance ZnO TFT with a low thermal budget is very promising for flexible electronic applications.

Influence of Vertical Irregularity on the Seismic Behavior of Base Isolated RC Structures with Lead Rubber Bearings under Pulse-Like Earthquakes

Nowadays,an extensive number of studies related to the performance of base isolation systems implemented in regular reinforced concrete structures subjected to various types of earthquakes can be found in the literature.On the other hand,investigations regarding the irregular base-isolated reinforced concrete structures’performance when subjected to pulse-like earthquakes are very scarce.The severity of pulse-like earthquakes emerges from their ability to destabilize the base-isolated structure by remarkably increasing the displacement demands.Thus,this study is intended to investigate the effects of pulse-like earthquake characteristics on the behavior of low-rise irregular base-isolated reinforced concrete structures.Within the study scope,investigations related to the impact of the pulse-like earthquake characteristics,irregularity type,and isolator properties will be conducted.To do so,different values of damping ratios of the base isolation system were selected to investigate the efficiency of the lead rubber-bearing isolator.In general,the outcomes of the study have shown the significance of vertical irregularity on the performance of base-isolated structures and the considerable effect of pulse-like ground motions on the buildings’behavior.

Analysis on Change Characteristics of Diurnal Temperature Range in Benxi County from 1958 to 2010

Based on annual mean maximum and minimum temperatures,diurnal temperature range,precipitation,sunshine,total cloud cover and water barometric pressure data in Benxi County from 1958 to 2010,using statistical analysis,the results show that the annual and seasonal diurnal temperature ranges present significant decreasing tendencies,and the reducing tendency is the most remarkable in winter. Autumn reducing tendency is stronger than that in spring,and it is the weakest in summer. Annual and seasonal average temperatures,average maximum and minimum temperatures all present the remarkable rising trends. Rising trend of the minimum temperature is more significant than that of the maximum temperature. The monthly mean diurnal temperature range also presents reducing tendency,and the most reducing scope appear in January and February. Annual and season diurnal temperature range changes are related to sunshine,mean minimum temperature,mean maximum temperature,precipitation,total cloud cover and water barometric pressure,but various essential factors are different in each season. Annual mean temperature,annual mean minimum temperature,annual mean maximum temperature and annual diurnal temperature range all have sudden changes,but the age is inconsistent.

Numerical Study for Characteristic Change of Asian Summer Monsoon Circulation and Its Influence Mechanism during the EI Nino Period

In this paper, the relation between Asian summer monsoon circulation and sea surface temperature anomalies over equatorial central-eastern Pacific is investigated by using a global spectral model. This model has nine layers in the vertical and the model variables are represented in the horizontal as truncated expansions of the surface spherical harmonics with rhomboidal truncation at wave number 15. The model involves comparatively complete physical processes and parameterizations with mountains.Using the above model, two experimental schemes are designed, namely control case and anomalous sea surface temperature case. The above two schemes are respectively integrated for forty days and the simulated results are obtained from the last 30-day averaged simulations.The simulations show that positive SST anomalies over equatorial central-eastern Pacific weakens Indian monsoon circulation,decreases precipitation in Indian sub-continent whereas it intensifies East Asian monsoon circulation and increases precipitation in East Asian area. All these results reflect the characteristics of Asian summer monsoon during the El Nino period. In this paper, SST anomalies over equatorial central-eastern Pacific have a direct influence on the intensity and position of subtropical high via the wave train over Northern Hemisphere, which is similar to that suggested by Nitta(1987) and the wave train over Southern Hemisphere has an influence on the intensity of Muscarene high and Australia high resulting in affecting cross equatorial flow. As a result, atmospheric interior heat sources and sinks are redistributed because of the change of cross equatorial flow. And the response of atmosphere to the new heat source and sink has a significant influence on Asian summer monsoon.

Influence of substrate process tolerances on transmission characteristics of frequency-selective surface

Frequency-selective surface （FSS） is a two-dimensional periodic structure consisting of a dielectric substrate and the metal units （or apertures） arranged periodically on it. When manufacturing the substrate, its thickness and dielectric constant suffer process tolerances. This may induce the center frequency of the FSS to shift, and consequently influence its characteristics. In this paper, a bandpass FSS structure is designed. The units are the Jerusalem crosses arranged squarely. The mode-matching technique is used for simulation. The influence of the tolerances of the substrate＇s thickness and dielectric constant on the center frequency is analyzed. Results show that the tolerances of thickness and dielectric constant have different influences on the center frequency of the FSS. It is necessary to ensure the process tolerance of the dielectric constant in the design and manufacturing of the substrate in order to stabilize the center frequency.

Erosion and Sediment Production in Small Watershed in Purple Hilly Areas and Prevention Techniques

Purple Soil distributes extensively and mainly in China. Because of abundant easily weatherable parent rocks/ materials and unstable soil structure, and also influenced by parent materials, usage systems, and slope gradients, erosion and sediment production of purple soils are very severe with main fashions of water erosion and gravitational erosion. Basing on observed data in small watersheds, rainfall erosivity, vegetation coverage, previous soil water content, flow and relating factors such as climate, topograph of small watershed, land usage, and soil kinds are all the influence factors of erosion and erodibility of purple soil as well as sediment production and transport in small watershed of purple hilly areas. The effective technological countermeasures of ecosystem restoration, agricultural tillage for water conservation and erosion prevention, agriculture project, and soil changing for fertility and anti-erosion were provided.

Progress and trend on near-field problems in civil engineering

In the last twenty years, near-field problems became an important topic for both seismologists and civil engineers. The one aspect is to illuminate mechanisms of earthquakes and explain new phenomena. The another aspect is the ground motions, which are usually assigned by engineers as a type of input load for seismic design of structures, sometimes can control the final design results. The experiments, performance evaluations and other related aspects are all based on the specified type of load. As a result, many aspects related to civil engineering will be influenced by changes of the type of load, Hence, the characteristics of the load and the corresponding response of structures are desired for studying. In this paper, the state-of-the-art of near-field problems in civil engineering is comprehensively reviewed, which include inherent characteristics of near-field ground motions and influences of these ground motions on civil structures. The existing problems are pointed out and work needed to be further investigated in the future is suggested. It is believed that the information in this paper can be useful to advance the state of investigation on near-field problems.

STUDY ON THE STABILITY STRUCTURE OF SYNOPTIC SCALE SYSTEMS,THE BIFURCATION OF PHASE.PATH CHARACTERISTICS AND THE INFLUENCE OF THE TIME-OSCILLATION OF HEAT SOURCE

This paper discusses the stability structure and the bifurcation of phase path characteristics of synoptic scale system.The analytic results show that the catastrophe of the synoptic scale disturbance may be caused by the nonlinear effects of barotropic and baroclinic instability and advection of ambient large-scale flow.Also, foregoing nonlinear effects on the speed of development and decay of the system are presented in the processes deviating from or approaching to equilibrium state.It has been found that there is a resonance phenomenon between the time-oscillation of heat source and the atmospheric disturbance.