Information Conductivity:Universal Performance Measure for Semantic Communications

As a novel paradigm,semantic communication provides an effective solution for breaking through the future development dilemma of classical communication systems.However,it remains an unsolved problem of how to measure the information transmission capability for a given semantic communication method and subsequently compare it with the classical communication method.In this paper,we first present a review of the semantic communication system,including its system model and the two typical coding and transmission methods for its implementations.To address the unsolved issue of the information transmission capability measure for semantic communication methods,we propose a new universal performance measure called Information Conductivity.We provide the definition and the physical significance to state its effectiveness in representing the information transmission capabilities of the semantic communication systems and present elaborations including its measure methods,degrees of freedom,and progressive analysis.Experimental results in image transmission scenarios validate its practical applicability.

Mutual Information Maximization via Joint Power Allocation in Integrated Sensing and Communications System

In this paper, we focus on the power allocation of Integrated Sensing and Communication(ISAC) with orthogonal frequency division multiplexing(OFDM) waveform. In order to improve the spectrum utilization efficiency in ISAC, we propose a design scheme based on spectrum sharing, that is,to maximize the mutual information(MI) of radar sensing while ensuring certain communication rate and transmission power constraints. In the proposed scheme, three cases are considered for the scattering off the target due to the communication signals,as negligible signal, beneficial signal, and interference signal to radar sensing, respectively, thus requiring three power allocation schemes. However,the corresponding power allocation schemes are nonconvex and their closed-form solutions are unavailable as a consequence. Motivated by this, alternating optimization(AO), sequence convex programming(SCP) and Lagrange multiplier are individually combined for three suboptimal solutions corresponding with three power allocation schemes. By combining the three algorithms, we transform the non-convex problem which is difficult to deal with into a convex problem which is easy to solve and obtain the suboptimal solution of the corresponding optimization problem. Numerical results show that, compared with the allocation results of the existing algorithms, the proposed joint design algorithm significantly improves the radar performance.

Application of Electronic Information Engineering in Hospital Management

To further enhance the overall service quality of China’s hospitals and improve the trust of the majority of patients in hospitals,this paper takes intelligent hospital management as the object of study,analyzes the importance of electronic information engineering technology applied in hospital management,and discusses the specific application methods of electronic information engineering in hospital management.This aims the existing problems in the current hospital management,such as insufficient degree of informatization,data sharing difficulties,lack of professionals,etc.Corresponding improvement measures are proposed,including strengthening the construction of informatization,promoting data sharing,and cultivating professionals.It is hoped that this study will enable the majority of hospital managers to make better use of electronic information engineering technology to effectively solve the current problems faced by hospitals and to continuously improve the comprehensive competitiveness of China’s hospitals.

The Model of“Post,Course,Competition,Certificate”Integrated Education for Electronic Information Engineering Technology Major in Higher Vocational Colleges

The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.

Age of Information for Short-Packet Covert Communication with Time Modulated Retrodirective Array

In this paper,the covert age of information(CAoI),which characterizes the timeliness and covertness performance of communication,is first investigated in the short-packet covert communication with time modulated retrodirective array(TMRDA).Specifically,the TMRDA is designed to maximize the antenna gain in the target direction while the side lobe is sufficiently suppressed.On this basis,the covertness constraint and CAoI are derived in closed form.To facilitate the covert transmission design,the transmit power and block-length are jointly optimized to minimize the CAoI,which demonstrates the trade-off between covertness and timelessness.Our results illustrate that there exists an optimal block-length that yields the minimum CAoI,and the presented optimization results can achieve enhanced performance compared with the fixed block-length case.Additionally,we observe that smaller beam pointing error at Bob leads to improvements in CAoI.

Innovation and Practice of Teaching Methods in Digital and Adaptive Learning:Taking Communication Engineering Major as an Example

This paper proposes teaching reforms in communication engineering majors,emphasizing the implementation of digital and adaptive teaching methodologies,integrating emerging technologies,breaking free from the constraints of traditional education,and fostering high-caliber talents.The reform measures encompass fundamental data collection,recognition of individual characteristics,recommendation of adaptive learning resources,process-oriented teaching management,adaptive student guidance and early warning systems,personalized evaluation,and the construction of an integrated service platform.These measures,when combined,form a comprehensive system that is expected to enhance teaching quality and efficiency,and facilitate student development.

Electronic Technologies in Communications Engineering

The influence of modern electronic technology on communication engineering is explained in this paper.Based on the development status of communication engineering,the characteristics and application strategies of modern electronic technology in communication engineering are discussed,including the optimization and improvement of wireless communication system.

A framework of force of information influence and application for C4KISR system

The subversive nature of information war lies not only in the information itself, but also in the circulation and application of information. It has always been a challenge to quantitatively analyze the function and effect of information flow through command, control, communications, computer, kill, intelligence,surveillance, reconnaissance (C4KISR) system. In this work, we propose a framework of force of information influence and the methods for calculating the force of information influence between C4KISR nodes of sensing, intelligence processing,decision making and fire attack. Specifically, the basic concept of force of information influence between nodes in C4KISR system is formally proposed and its mathematical definition is provided. Then, based on the information entropy theory, the model of force of information influence between C4KISR system nodes is constructed. Finally, the simulation experiments have been performed under an air defense and attack scenario. The experimental results show that, with the proposed force of information influence framework, we can effectively evaluate the contribution of information circulation through different C4KISR system nodes to the corresponding tasks. Our framework of force of information influence can also serve as an effective tool for the design and dynamic reconfiguration of C4KISR system architecture.

ZTE Communications Guidelines for Authors

Remit of Journal ZTE Communications publishes original theoretical papers,research findings,and surveys on a broad range of communications topics,including communications and information system design,optical fiber and electro⁃optical engineering,microwave technology,radio wave propagation,antenna engineering,electromagnetics,signal and image processing,and power engineering.The journal is designed to be an integrated forum for university academics and industry researchers from around the world.

ZTE Communications Guidelines for Authors

Remit of Journal ZTE Communications publishes original theoretical papers,research findings,and surveys on a broad range of communications topics,including communications and information system design,optical fiber and electrooptical engineering,microwave technology,radio wave propagation,antenna engineering,electromagnetics,signal and image processing,and power engineering.The journal is designed to be an integrated forum for university academics and industry researchers from around the world.

Influence of Quantum Information Technology on International Security

Humanity is currently undergoing the fourth industrial revolution,characterized by advancements in artificial intelligence,clean energy,quantum information technology,virtual reality,and biotechnology.This technological revolution is poised to have a profound impact on the world.Quantum information technology encompasses both quantum computing and the transmission of quantum information.This article aims to integrate quantum information technology with international security concerns,exploring its implications for international security and envisioning its groundbreaking significance.

Locating Global System for Mobile Communication(GSM)Base Stations Using Geographic Information System(GIS)

The global system for mobile communication(GSM)is planned to meet the needs of the whole subscribers.The number of subscribers increased as the population increased due to the acceptance of GSM services by the subscribers.Thus,there should be a way to monitor base stations that will meet the increasing demand of subscribers in any area as a population surge will lead to more subscriptions.This will allow GSM network operators to serve their subscribers better and ease network congestion.This work presents a review of mobile evolution from the first generation to the fifth generation.A review of global positioning system(GPS)technology and its applications to geographic information systems(GIS)was done.The coordinates of these base stations were taken using a GPS device.These base station coordinates were then exported to QGIS for the design of the map.Thereafter,the output map was then integrated into the website.The discussions on the results followed and some useful suggestions given will go a long way to help the operators of GSM in Nigeria and in general.If the propositions given are adhered to,it will go a long way to help the operators reduce congestion on their network and thereby increase the satisfaction of the subscribers.

Marine Engineering Geological Exploration Information System(MEGEIS):A GIS-based Application to Marine Resources Exploitation

Based on the ArcGIS geographic information system and the ORACLE database management system,this paper reports our studies on the technology of Marine Engineering Geological Exploration Information System(MEGEIS). By analyzing system structure,designing function modules and discussing data management,this paper systematically proposes a framework of technol-ogy to integrate,manage,and analyze the seabed information comprehensively. Then,the technology is applied to the design and development of the Bohai Sea Oilfield Paradigm Area Information System. The system can not only meet the practical demands of marine resources exploration and exploitation in the Bohai Sea oilfield,but also serve as a preparatory work in theory and technology for the realization of the 'Digital Seabed'.

Forecasting promising technology using analysis of patent information:Focused on next generation mobile communications

In order to forecast promising technologies in the field of next generation mobile communication, various patent indicators were analyzed such as citation per patent, patent family information, patent share, increase rate, and patent activity. These indicators were quantified into several indexes and then integrated into an evaluation score to provide promising technologies. As a result of the suggested patent analysis, four technologies out of twenty two in details classification were selected, which showed outstanding technology competitiveness, high patent share and increasing rates as well as high recent-patent-ratios and triad-patent-family-ratios. Each of the selected technologies scored more than 10 points in total, and the following four technologies were suggested as promising ones in the field of next generation mobile communication: 1) 3GPP based mobile communication, 2) beyond 4G mobile communication, 3) IEEE 802.16 based mobile communication, which are in medium classification of broadband mobile communication system, and 4) testing/certification system of mobile communication, which is in medium classification of mobile communication testing/certification system.

Research on a Product Information Management System Facing Remanufacture Engineering

Remanufacture Engineering is an important characteristic and development trend of a manufacturing system in the 21st Century, and product information management is very important to Remanufacture Engineering. In this paper, we first compared traditional manufacturing and remanufacturing. Then, according to the features of Remanufacture Engineering, we analyzed the request of product information management system facing Remanufacture Engineering, and designed the system module. Finally, we built a kind of system structure of product information management facing Remanufacture Engineering and gave realization methods based on Web.

ENGINEERING MECHANICS AND MATERIALS RESEARCH IN THE INFORMATION TECHNOLOGY AGE

In this paper, importance of information technology research and development for economic growth and prosperity is presented. Major missio of the research for fundamental science and engineering base is discussed. Critical points of the mechanics and materials research in the 21st Century are proposed.

The Geostatistical Information Method of Exploratory Engineering

The geostatistical information method consists in the use of the principle of quantitative evaluation in exploratory engineering research. The principle of uantitative evaluation is based on the mathematical model of the ore body. The selection of optimal exploratory scheme and optimal engineering positions has been studied in this paper.

An information-based rough set approach to critical engineering factor identification

In order to analyze the main critical engineering factors, an information-based rough set approach that considers conditional information entropy as a measurement of information has been developed. An algorithm for continuous attribute discretization based on conditional information entropy and an algorithm for rule extraction considering the supports of rules are proposed. The initial decision system is established by collecting enough monitoring data. Then, the continuous attributes are discretized, and the condition attributes are reduced. Finally, the rules that indicate the action law of the main factors are extracted and the results are explained. By applying this approach to a crack in an arch gravity dam, it can be concluded that the water level and the temperature are the main factors affecting the crack opening, and there is a negative correlation between the crack opening and the temperature. This conclusion corresponds with the observation that cracks in most concrete dams are influenced mainly by water level and temperature, and the influence of temperature is more evident.