Non-probabilistic information fusion technique for structural damage identification based on measured dynamic data with uncertainty

Based on measured natural frequencies and acceleration responses,a non-probabilistic information fusion technique is proposed for the structural damage detection by adopting the set-membership identification（SMI） and twostep model updating procedure.Due to the insufficiency and uncertainty of information obtained from measurements,the uncertain problem of damage identification is addressed with interval variables in this paper.Based on the first-order Taylor series expansion,the interval bounds of the elemental stiffness parameters in undamaged and damaged models are estimated,respectively.The possibility of damage existence（PoDE） in elements is proposed as the quantitative measure of structural damage probability,which is more reasonable in the condition of insufficient measurement data.In comparison with the identification method based on a single kind of information,the SMI method will improve the accuracy in damage identification,which reflects the information fusion concept based on the non-probabilistic set.A numerical example is performed to demonstrate the feasibility and effectiveness of the proposed technique.

Structural Stress Identification Using Fuzzy Pattern Recognition and Information Fusion Technique

In order to ensure the service security of space structures under wind load, the stress identification method based on the combination of fuzzy pattern recognition and information fusion technique is proposed, in which the measurements of limited strain sensors arranged on the structure are used. Firstly, the structure is divided into several regions according to the similarity and the most unfavorable region is selected to be the key region for stress identification, while the different numbers of the strain sensors are located on the key region and the normal regions; secondly, the different stress distributions of the key region are obtained based on the measurements of the strain sensors located on the key region and the normal regions separately, in which the fuzzy pattern recognition is used to identify the different stress distributions; thirdly, the stress distributions obtained by the measurements of sensors in normal regions are selected to calculate the synthesized stress distribution of the key region by D-S evidence theory; fourthly, the weighted fusion algorithm is used to assign the different fusion coefficients to the selected stress distributions obtained by the measurements of the normal regions and the key region, while the synthesized stress distribution of the key region can be obtained. Numerical study on a lattice shell model is carried out to validate the reliability of the proposed stress identification method. The simulated results indicate that the method can improve identification accuracy and be effective by different noise disturbing.

LOSS ASSESSMENT OF BURNED FOREST USING REMOTE SENSING AND GEOGRAPHICAL INFORMATION TECHNIQUES

After forest fire, it is very needed to locate fire position and assess the loss of forest resources. In this paper, a method of burned forest assessment with satellite remote sensing data and over-laying techniques is discussed and used in the assessment of the burned forest in Malin Forest Farm after the large forest fire of May, 1987.

Adaptive broadband beamformer for nonuniform linear array based on second order cone programming

Adaptive broadband beamforraing is a key issue in array applications. The adaptive broadband beamformer with tapped delay line （TDL） structure for nonuniform linear array （NLA） is designed according to the rule of minimizing the beamformer＇s output power while keeping the distortionless response （DR） in the direction of desired signal and keeping the constant beamwidth （CB） with the prescribed sidelobe level over the whole operating band. This kind of beamforming problem can be solved with the interior-point method after being converted to the form of standard second order cone programming （SOCP）. The computer simulations are presented which illustrate the effectiveness of our beamformer.

An Orthogonal Wavelet Transform Fractionally Spaced Blind Equalization Algorithm Based on the Optimization of Genetic Algorithm

An orthogonal wavelet transform fractionally spaced blind equalization algorithm based on the optimization of genetic algorithm(WTFSE-GA) is proposed in viewof the lowconvergence rate,large steady-state mean square error and local convergence of traditional constant modulus blind equalization algorithm(CMA).The proposed algorithm can reduce the signal autocorrelation through the orthogonal wavelet transform of input signal of fractionally spaced blind equalizer,and decrease the possibility of CMA local convergence by using the global random search characteristics of genetic algorithm to optimize the equalizer weight vector.The proposed algorithm has the faster convergence rate and smaller mean square error compared with FSE and WT-FSE.The efficiency of the proposed algorithm is proved by computer simulation of underwater acoustic channels.

Statistics Modeling of Shallow Sea Ambient Noise and Its Applications in Low-frequency Line Spectrum Detection

The noise's statistical characteristics are very important for signal detection.In this paper,the ambient noise statistical characteristics are investigated by using the recorded noise data in sea trials first,and the results show that the generalized Gaussian distribution is a suitable model for the ambient noise modeling.Thereafter,the optimal detector based on maximum likelihood ratio can be deduced,and the asymptotic detector is also derived under weak signal assumption.The detector's performance is verified by using numerical simulation,and the results showthat the optimal and asymptotic detectors outperform the conventional correlation-integration system due to accuracy modeling of ambient noise.

Assessing the Response of Seasonal Variation of Net Primary Productivity to Climate Using Remote Sensing Data and Geographic Information System Techniques in Xinjiang

Net primary productivity （NPP） is a key component of energy and matter transformation in the terrestrial ecosystem, and the responses of NPP to global change locally and regionally have been one of the most important aspects in climatevegetation relationship studies. In order to isolate causal climatic factors, it is very important to assess the response of seasonal variation of NPP to climate. In this paper, NPP in Xinjiang was estimated by NOAA/AVHRR Normalized Difference Vegetation Index （NDVI） data and geographic information system （GIS） techniques. The impact of climatic factors （air temperature, precipitation and sunshine percentage） on seasonal variations of NPP was studied by time lag and serial correlation ageing analysis. The results showed that the NPP for different land cover types have a similar correlation with any one of the three climatic factors, and precipitation is the major climatic factor influencing the seasonal variation of NPP in Xinjiang. It was found that the positive correlation at 0lag appeared between NPP and precipitation and the serial correlation ageing was 0 d in most areas of Xinjiang, which indicated that the response of NPP to precipitation was immediate. However, NPP of different land cover types showed significant positive correlation at 2 month lag with air temperature, and the impact of which could persist 1 month as a whole. No correlation was found between NPP and sunshine percentage.

A Brief Review on Application of Information Technique to Agrometeorological Disaster Reduction

Disaster reduction strategy of agrometeorological disasters is a very complicated systematic project. The system is divided into two subsystems: agrometeorological disaster subsystem and dis aster reduction strategy subsystem. The agrometeorological disaster subsystem incIudes the whole process of disaster from occurrence, development to extinction. The subsystem of disaster reduction strategy is strategy measures included prevention, resistance and remedy of disaster The system involves monitoring, forecasting, prevention, resistance, control, loss assessment of disaster and efficiency analysis of disaster reduction. Therefore, modern information techniques (remote sensing, artificial intelligence, crop simulation etc. ) are necessary for improving the a bility of prevention and reduction of

Assessment of Power Quality Based on D-S Evidence Theory

Technological advancement of measurement systems has enhanced the accuracy of power quality assessment by using a combination of measured information. This paper proposes a novel approach for estimating power quality based on information fusion technique of Dempster-Shafer(D-S) evidence theory. First, in order to accurately extract transient features regarding power quality indexes, wavelet packet transform and lifting wavelet transform are proposed to detect various disturbance signals measurement. By using many kinds of transformed transient indexes and steady state indexes, a novel reliability distribution function is constructed,and synthesized assessment index of power quality is drafted based on information fusion technique of D-S evidence theory. Finally,the simulation results prove that D-S evidence theory is a more effective means for evaluating the power quality.