Agglomeration rate and action forces between atomized particles of agglomerator and inhaled-particles from coal combustion

In order to remove efficiently haled-particles emissions from coal combustions, a new way was used to put forward the process of agglomeration and the atomization was produced by the nozzle and then sprayed into the flue before precipitation devices of power station boiler in order to make inhaled-particles agglomerate into bigger particles, which can be easily removed but not change existing running conditions of boiler. According to this idea, a model is set up to study agglomeration rate and effect forces between fly ash inhaled-particles and atomized agglomerator particles. The developed agglomeration rate was expressed by relative particle number decreasing speed per unit volume. The result showed that viscosity force and flow resistance force give main influences on agglomeration effect of inhaled-particles, while springiness force and gravity have little effect on agglomeration effect of theirs. Factors influencing the agglomeration rate and effect forces are studied, including agglomerator concentration, agglomerator flux and agglomerator density, atomized-particles diameters and inhaled-particles diameter and so on.

Variation Characteristics of Mass Concentration of Inhalable Particles in Qingdao, China

The geographical condition of Qingdao, China is relatively special;the transport of various inland pollutants, the emissions of marine aerosol and local pollutants will have an impact on the changes of atmospheric aerosol concentration. By using the stability classification method, trajectory clustering analysis and the NOAA HYSPLIT model, the seasonal distribution characteristics of atmospheric inhalable particulate matter concentration in Qingdao, China and its relationship with meteorological conditions, mixed layer height, and the seasonal characteristics of Qingdao pollutant transport were analyzed. The results show that the variation trends of PM2.5 and PM10 were about the same, and there are obvious seasonal differences, which are high in winter and spring, and low in summer and autumn. The concentration of inhalable particulate matter has a negative correlation with temperature, wind speed and relative humidity. The concentration of inhalable particulate matter is distinct in different relative humidity ranges. When the wind speed is less than 3 - 4 m/s, there are more inhalable particles, while the mass concentration shows obvious reduction with the wind speed more than 4 m/s. There is a significant negative correlation between the mass concentration of pollutants and the daily maximum mixed layer height. The larger the concentration of pollutants, the smaller the thickness of the daily largest mixed layer. Conversely, the smaller the mass concentration of pollutants, the larger the thickness of the daily largest mixed layer. The pollutant transport in Qingdao has obvious seasonal characteristics. The air mass in spring, autumn and winter is mainly medium-long distance transport from Mongolia and southern Russia, and medium-short distance transport from Inner Mongolia and northeast of China. The source of air masses in summer is mainly transported from the eastern and sea areas.

Operando investigation of particle re-entrainment mechanism in electrostatic capture process on the lab-on-a-chip

Inhalable particle is a harmful air pollutant that causes a significant threat to people's health and ecological environments,which should be removed to purify air,but there exists limited removal efficiency due to particle re-entrainment.Here,Operando observation system based on microscopic visualization method is developed to make in situ test of particle migration,deposition and re-entrainment characteristics on a lab-on-a-chip to achieve the investigation in micro-level scale.The deposition evolution of charged particles is recorded in electric field region intuitively,which confirms the fracture of particle chain occurs during the growth process of deposited particles.It captures the instantaneous process that a larger particle with micron size due to the coagulation of submicron particles fractures from main body of the particle chain for the first time.The analysis of migration behavior of a single submicron particle near electrode surface demonstrates the direct influence of drag force on the fracture of particle chain.This work is the first-time visualization of dynamic process and mechanism elucidation of particle re-entrainment at the micron level,and the findings will provide the theory support for the particle re-entrainment mechanism and bring inspires of enhancing capture efficiency of inhalable particle.

NANOPARTICLE AEROSOL SCIENCE AND TECHNOLOGY:AN OVERVIEW

As a new scientific discipline, nanoparticle aerosol science and technology （NAST） deals with the formation, properties and behavior of nanoparticles in gases. Driven by its practical applications in many different fields, NAST has been undergoing rapid development. A conceptual framework of the discipline, with its own basic principles, experimental methods and computational techniques, is now taking shape. This paper presents an overview of the current status and research needs of the new discipline. The presentation begins with a discourse on the relationship among various particle systems, which occur frequently in nature and industry. The properties and behavior of nanoparticle aerosols are then discussed, with emphasis on the key roles played by particle size and morphology. Similar to fluid dynamics, NAST is an enabling discipline in the sense that it has provided the concepts and methodology needed for the development of many other fields. Applications of nanoparticle aerosol science and technology are highlighted in three important areas： （1） aerosol processes for synthesis of nanoparticles, （2） atmospheric nanoparticles and global climate, and （3） dosimetry of inhaled nanoparticles. These fields have features in common insofar as nanoparticie aerosols follow the same basic laws of physics and chemistry.

Characteristics of air pollution by polychlorinated dibenzo-p-dioxins and dibenzofurans in the typical industrial areas of Tangshan City,China

The ambient air in vicinity of different industrial sources for PCDD/PCDFs was sampled by TSP/PM10 active samplers and passive PUF disk samplers in Tangshan City, a metropolis containing clusters of various industrial plants. The TEQ concentrations of PCDD/PCDFs ranged from 44.2 to 394.1 fg I-TEQ/m^3 with an average of 169.9 fg I-TEQ]m^3. 2,3,4,7,8-PeCDF was the dominant contributor to ∑TEQ, contributing 41% （12% to 55%）, while 1,2,3,4,6,7,8-HpCDE OCDD and OCDF were the major congeners for the total concentrations. The ratios of ∑PCDF/∑PCDD reached 2.54 on average, suggesting that de novo synthesis in thermal processes played an important role to the airborne pollution of PCDD/PCDFs. The similarities congener profiles indicated that TSP and PM10 active sampling methods are comparable for the determination of the PCDD/PCDFs in ambient air, and the ratios of concentrations determined by the two methods suggested that the PCDD/PCDFs tended to stay in fine particles. It was found that 2,3,7,8-TCDF and OCDD were the dominating congeners in the passive PUF disks samples. Through principal components analysis, the coke industry was suggested to be a relatively high potential emission source for PCDD/PCDFs in the ambient air of Tangshan, which was possibly formed by de novo synthesis mechanism. In this study, the atmospheric impacts to the environment from different industrial sources could be ranked as follows （from high to low）： coking, iron sintering, steel making, power generation and chlorinate alkali chemical production industries.

DEM analysis of the effect of electrostatic interaction on particle mixing for carrier-based dry powder inhaler formulations

Particle interactions play a significant role in controlling the performance of dry powder inhalers （DPIs）, which mainly arise through van der Waals potentials, electrostatic interactions, and capillary forces. Our aim is to investigate the influence of electrostatic charge on the performance of DPIs as a basis for improv- ing the formulation of the particle ingredients. The mixing process of carrier and active pharmaceutical ingredient （API） particles in a vibrating container is investigated using a discrete element method （DEM）. The number of APl particles attaching to the carrier particle （i.e., contact number） increases with increas- ing charge and decreases with increasing container size. The contact number decreases with increasing vibrational velocity amplitude and frequency. Moreover, a mechanism governed by the electrostatic force is proposed for the mixing process. This mechanism is different from that previously proposed for the mixing process governed by van der Waals forces, indicating that long-range and short-range adhesive forces can result in different mixing behaviours.