Plate reinforced square hollow section X-joints subjected to in-plane moment

The static test of 13 square hollow section(SHS) X-joints with different β and different types of plate reinforcement under in-plane moment in brace was carried out. Experimental test schemes, failure modes of specimens, moment-vertical displacement curves, moment-deformation of the chord, and strain strength distribution curves were presented. The effect of β and plate reinforcement types on in-plane flexural property of SHS X-joints was studied. Results show that punching shear of chord face disappears, brace material fracture appears and concave and convex deformation of chord decrease when either collar plates or doubler plates were welded on chord face. Moment-vertical displacement curves of all specimens have obvious elastic, elastic-plastic and plastic stages. As β increases, the in-plane flexural ultimate capacity and initial stiffness of joints of the same plate reinforcement type increase, but ductility of joints decreases. With the same β, the in-plane flexural initial stiffness and ultimate capacity of doubler plate reinforced joints, collar plate reinforced joints, and unreinforced joints decrease progressively. Thickness of reinforcement plate has no obvious effect on in-plane flexural initial stiffness and ultimate capacity of joints. As thickness of reinforcement plate increases, the ductility of reinforced X-joints decreases. The concave and convex deformation of every specimen has good symmetry;as β increases, the yield and ultimate deformation of chord decrease.

INITIAL BINDING CAPACTIES OF CHLORIDE ION OF COMPONENTS IN HIGH-PERFORMANCE CONCRETE

An investigation is reported on the influence of different components of high performance concrete (HPC) on the initial binding capacities (IBC) of chloride ion. The testing results demonstrate that cement has the largest IBC, and the relative binding ratio is as high as 30% of total ion amount. Among the mineral admixtures, fly ash has the largest IBC of chloride ion. The IBC of silica fume is about 14.4%, which is smaller than that of fly ash. The IBC of refined ground blast-furnace slag (microslag) is abnormal due to the influence of sulfate ion contained. The addition of superplasticizer and corrosion inhibitor containing calcium nitrite weakens the IBC of mixtures. The fluidity and pore-filling effect of mineral admixtures are studied with paste samples with WIC ratio of 0.3. The influence mechanism of various components in high-performance concrete in IBC is studied further through SEM and Mercury Instrusion Porosimetry tests with paste samples at the age of 3 days.

Improved Initial Charging Capacity of Na-poor Na0.44MnO2 via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Sodium-ion batteries(SIBs)are promising for grid-scale energy storage applications due to the natural abundance and low cost of sodium.Among various Na insertion cathode materials,Na0.44MnO2 has attracted the most attention because of its cost effectiveness and structural stability.However,the low initial charge capacity for Na-poor Na0.44MnO2 hinders its practical applications.Herein,we developed a facile chemical presodiated method using sodiated biphenly to transform Na-poor Na0.44MnO2 into Na-rich Na0.66MnO2.After presodiation,the initial charge capacity of Na0.44MnO2 is greatly enhanced from 56.5 mA·h/g to 115.7 mA·h/g at 0.1 C(1 C=121 mA/g)and the excellent cycling stability(the capacity retention of 94.1%over 200 cycles at 2 C)is achieved.This presodiation strategy would open a new avenue for promoting the practical applications of Na-poor cathode materials in sodium-ion batteries.

Recent advances and perspectives on prelithiation strategies for lithium-ion capacitors

Lithium-ion capacitors(LICs),consisting of a capacitor-type material and a battery-type material together with organic electrolytes,are the state-of-the-art electrochemical energy storage devices compared with supercapacitors and batteries.Owing to their unique characteristics,LICs received a lot of attentions,and great progresses have been achieved,especially in the exploration of cathode and anode materials.Prelithiation techniques are regarded as indispensable procedures for LICs systems,which can compensate for the initial irreversible capacity loss,increase the Li^(+)concentration in the electrolyte,raise the working voltage and resolve the safety and cycle stability issues;however,its research progress is slow,and there is not enough attention until now.In this overview,we look into the ongoing processes on the recent development of prelithiation technologies,especially in organic electrolyte consumption-type LICs.In particular,some prelithiation strategies for LICs are summarized and discussed in detail,including the ex situ electrochemical method,in situ electrochemical method,and cathode prelithiation additives method.Moreover,we propose some unresolved challenges and prospects for prelithiation technologies from the basic research ideas and future key research directions.This work aims to bring up new insights to reassess the significance of premetallation strategies for advanced hybrid-ion capacitors based on the currently proposed prelithiation strategies.