Preliminary discussion on the ignition mechanism of exploding foil initiators igniting boron potassium nitrate

Exploding foil initiator(EFI)is a kind of advanced device for initiating explosives,but its function is unstable when it comes to directly igniting pyrotechnics.To solve the problem,this research aims to reveal the ignition mechanism of EFIs directly igniting pyrotechnics.An oscilloscope,a photon Doppler velocimetry,and a plasma spectrum measurement system were employed to obtain information of electric characteristics,impact pressure,and plasma temperature.The results of the electric characteristics and the impact pressure were inconsistent with ignition results.The only thing that the ignition success tests had in common was that their plasma all had a relatively long period of high-temperature duration(HTD).It eventually concludes that the ignition mechanism in this research is the microconvection heat transfer rather than the shock initiation,which differs from that of exploding foil initiators detonating explosives.Furthermore,the methods for evaluating the ignition success of semiconductor bridge initiators are not entirely applicable to the tests mentioned in this paper.The HTD is the critical parameter for judging the ignition success,and it is influenced by two factors:the late time discharge and the energy of the electric explosion.The longer time of the late time discharge and the more energy of the electric explosion,the easier it is to expand the HTD,which improves the probability of the ignition success.

Iron Arene Salts as Initiators for Thermal Curing of Epoxides by Photo-catalysis

[Cyclopentadien-Fe-naphthalene]BF4(CFN) and [cyclopentadien-Fe-anisole]BF4(CFA) as thermal cationic initiators for the curing of epoxide E44 and GGE were investigated. CFN brought out the curing of E44 at 89.1℃ and that of GGE at 148.7℃. However, CFA had much less thermal initiating activity under 300℃. Under UV radiation for short time, the thermal initiating activities of CFN and CFA were enhanced obviously. It was observed that the initiating onset temperature decreased and the evolved heat of the curing increased. Both CFN and CFA can carry out the polymerization of E44 and GGE near 85℃ and 112℃ by UV radiation.

NON-ACETAL INITIATORS FOR GROUP TRANSFER POLYMERIZATION

It is reported that a variety of trimethylsilyl enol ethers of ketones and aldehydes can be used to initiate GTP of methacrylates and acryl- ates.The new initiators are easy to prepare from ketones or aldehydes.PMMA and PMA with controlled molecular weight and low polydispersity were obtained by using non-acetal initiators in the presence of bibenzoate,bifluo ide or Hgl_2,The living nature of polymerization is shown by the correspondence of theoretical and observed molecular weight and the preparation of A-B-A type triblock copolymer with methacrylate and acrylate segments can be prepared.

Research Progress of Catalysts and Initiators for Promoting the Cracking of Endothermic Hydrocarbon Fuels

Catalytic/initiated cracking of endothermic hydrocarbon fuels is an eff ective technology for cooling a hypersonic aircraft with a high Mach number(over 5).Catalysts and initiators can promote fuel cracking at low temperatures,increase fuel conversion and the heat sink capacity,and suppress coke deposition,thereby reducing waste heat.Catalysts mainly include metal oxide catalysts,noble metal catalysts and metal nanoparticles,zeolite catalysts,nanozeolite catalysts,and coating catalysts.Moreover,initiators roughly include nitrogenous compounds,oxygenated compounds,and hyperbranched polymer initiators.In this review,we aim to summarize the catalysts and initiators for cracking endothermic hydrocarbon fuels and their mechanisms for promoting cracking.This review will facilitate the development of the synthesis and exploration of catalysts and initiators.

TBE EFFIGIENGIES OF THREE INITIATORS OF Fe^(2+)—H_2O_2, K_2S_2O_8, KMnO_4 AND TBE KINETIC EQUATION IN THE GRAFTING OF AGRYLAMIDE ONTO STARCH

A comparative study is made on the efficiencies of three initiators of Fe^(2+)-H_2O_2, K_2S_2O_8 and KMnO_4 in the grafting of acrylamide onto starch. Of the three initiators the best one is KMnO_4. Moreover, the kinetic equation is also studied.

Kinetics of Vinyl Chloride Polymerization with Mixture of Initiators

Kinetic models for the rate constants of vinyl chloride polymerization in the presence of initiator mixtures were proposed. They may be used to design the initiator recipes for the vinyl chloride polymerization with uniform rate at different temperatures at which various grades of poly(vinyl chloride) will be prepared.

Influence of Water-soluble Azo Initiators on Cationic Latex particles

Batch cationic emulsion polymerization was carried out with styrene(St)and butyl acrylate(BA)as non-ionic monomer,Cetyl trimethyl ammonium chloride(CTAC)as emulsifier,and Azobis isobutyl amidine hydrochloride(AIBA)or Azo diisopropyl imidazoline hydrochloride(AIBI)as initiator.The effects of amount and molecule structure of initiators on latex particle size,PDI and particle morphology were analyzed.Results showed that higher initiator amount resulted in smaller particle size and higher PDI.Besides,smaller particle size were obtained when AIBI was used as initiator.

Actors of Psychoactive Drug Initiation among Adolescents in Yaoundé-Cameroon

Introduction: Actors of psychoactive drug initiation refer to those who introduce others to psychoactive drug use (initiators) and those who are introduced to psychoactive drugs (users). By identifying their features, better prevention and intervention programs can be developed to reduce psychoactive drug use among adolescents. This article describes the role of actors of psychoactive drug initiation among teenagers in secondary schools in Yaoundé (Cameroon). Methodology: A cross sectional study was carried out in twelve secondary schools in Yaoundé from October 2022 to May 2023. Adolescents from Form four to upper sixth, who assented to participate in the study and received parental consent were included. Data were collected in a structured self-reported questionnaire and analyzed using SPSS 23. Quantitative variables were expressed using means, standard deviations, median and interquartile ranges depending on the distribution of data. Qualitative variables were expressed in the form of frequency and percentages. Results: Drug use was more prevalent among male adolescents (55.3%) from nuclear families (91.4%) who received relatively high pocket money. The main sources of drug exposure were non-family members (49.7%), especially friends outside school. The most frequent place of initiation was snack bars (33.1%). Conclusion: The study revealed the importance of the family, friends and leisure places in the initiation process of drug use in teenagers. Based on these results, parents and school authorities should work together to create a safe and supportive environment that fosters communication, education to prevent drug abuse among adolescents in Yaoundé.

Corrigendum to“Nitrosamines crisis in pharmaceuticals-Insights on toxicological implications,root causes and risk assessment:A systematic review”[J.Pharm.Anal.14(2024)100919]

Original statement in the Section 2:2.Literature search Our primary screening of 180 articles yielded the relevant data for this study.2.1.Study selection A total of 180 articles spanning from 1960 to the present day,including original research,reviews,case reports and studies reporting nitrosamine impurities above the no-observed-adverse-effect levels(NOAEL)established by regulatory agencies,were initially screened.During the primary screening,we considered factors such as relevance,publication date,access to the full article text,and content.

A Comparative Study on the Post-Buckling Behavior of Reinforced Thermoplastic Pipes(RTPs)Under External Pressure Considering Progressive Failure

The collapse pressure is a key parameter when RTPs are applied in harsh deep-water environments.To investigate the collapse of RTPs,numerical simulations and hydrostatic pressure tests are conducted.For the numerical simulations,the eigenvalue analysis and Riks analysis are combined,in which the Hashin failure criterion and fracture energy stiffness degradation model are used to simulate the progressive failure of composites,and the“infinite”boundary conditions are applied to eliminate the boundary effects.As for the hydrostatic pressure tests,RTP specimens were placed in a hydrostatic chamber after filled with water.It has been observed that the cross-section of the middle part collapses when it reaches the maximum pressure.The collapse pressure obtained from the numerical simulations agrees well with that in the experiment.Meanwhile,the applicability of NASA SP-8007 formula on the collapse pressure prediction was also discussed.It has a relatively greater difference because of the ignorance of the progressive failure of composites.For the parametric study,it is found that RTPs have much higher first-ply-failure pressure when the winding angles are between 50°and 70°.Besides,the effect of debonding and initial ovality,and the contribution of the liner and coating are also discussed.

Risk assessment of oil and gas investment environment in countries along the Belt and Road Initiative

With the implementation of the Belt and Road Initiative, China is deepening its cooperation in oil and gas resources with countries along the Initiative. In order to better mitigate risks and enhance the safety of investments, it is of significant importance to research the oil and gas investment environment in these countries for China's overseas investment macro-layout. This paper proposes an indicator system including 27 indicators from 6 dimensions. On this basis, game theory models combined with global entropy method and analytic hierarchy process are applied to determine the combined weights, and the TOPSIS-GRA model is utilized to assess the risks of oil and gas investment in 76 countries along the Initiative from 2014 to 2021. Finally, the GM(1,1) model is employed to predict risk values for 2022-2025. In conclusion, oil and gas resources and political factors have the greatest impact on investment environment risk, and 12 countries with greater investment potential are selected through cluster analysis in conjunction with the predicted results. The research findings may provide scientific decisionmaking recommendations for the Chinese government and oil enterprises to strengthen oil and gas investment cooperation with countries along the Belt and Road Initiative.

Influence of initial check, information exchange, final accuracy check, reaction information nursing on the psychology of elderly with lung cancer

BACKGROUND As one of the fatal diseases with high incidence,lung cancer has seriously endangered public health and safety.Elderly patients usually have poor self-care and are more likely to show a series of psychological problems.AIM To investigate the effectiveness of the initial check,information exchange,final accuracy check,reaction(IIFAR)information care model on the mental health status of elderly patients with lung cancer.METHODS This study is a single-centre study.We randomly recruited 60 elderly patients with lung cancer who attended our hospital from January 2021 to January 2022.These elderly patients with lung cancer were randomly divided into two groups,with the control group taking the conventional propaganda and education and the observation group taking the IIFAR information care model based on the conventional care protocol.The differences in psychological distress,anxiety and depression,life quality,fatigue,and the locus of control in psychology were compared between these two groups,and the causes of psychological distress were analyzed.RESULTS After the intervention,Distress Thermometer,Hospital Anxiety and Depression Scale(HADS)for anxiety and the HADS for depression,Revised Piper’s Fatigue Scale,and Chance Health Locus of Control scores were lower in the observation group compared to the pre-intervention period in the same group and were significantly lower in the observation group compared to those of the control group(P<0.05).After the intervention,Quality of Life Questionnaire Core 30(QLQ-C30),Internal Health Locus of Control,and Powerful Others Health Locus of Control scores were significantly higher in the observation and the control groups compared to the pre-intervention period in their same group,and QLQ-C30 scores were significantly higher in the observation group compared to those of the control group(P<0.05).CONCLUSION The IIFAR information care model can help elderly patients with lung cancer by reducing their anxiety and depression,psychological distress,and fatigue,improving their tendencies on the locus of control in psychology,and enhancing their life qualities.

Determining rock crack stress thresholds using ultrasonic through-transmission measurements

The crack initiation stress threshold is widely used in excavation industries as rock spalling strength when designing deep underground structures to avoid unwanted brittle failures.While various strain-based methods have been developed for the estimation of this critical design parameter,such methods are destructive and often requires subjective interpretations of the stress–strain curves,particularly in rocks with pre-existing microcracks or high porosity.This study explore the applicability of non-destructive ultrasonic through-transmission methods for determining rock damage levels by assessing the changes in transmitted signal characteristics during loading.The change in velocity,amplitude,dominant frequency,and root-mean-square voltage are investigated with four different rock types including marble,sandstone,granite,and basalt under various stress levels.Results suggest the rate of signal variations can be reliably used to estimate crack closure and crack initiation stress levels across the tested rocks before failure.Comparison of the results between the conventional techniques and the new proposed methods based on ultrasonic monitoring are further discussed.

Ti/WO_(3),a nanothermite for special purposes:An experimental study

A new nanothermite system,composed of titanium and tungsten trioxide is reported.Initial investigations show that it has low-average sensitivity to mechanical stimuli(friction,impact),but that its sensitivity to laser irradiation can be controlled in a moderately wide range.The combustion of this nanothermite system takes place at a very high apparent temperature(>3695 K)and it follows the key predictions of the established reactive sintering mechanism,as supported by SEM-EDS and XRD analyses.

Effects of the initiation position on the damage and fracture characteristics of linear-charge blasting in rock

To study the effects of the initiation position on the damage and fracture characteristics of linear-charge blasting, blasting model experiments were conducted in this study using computed tomography scanning and three-dimensional reconstruction methods. The fractal damage theory was used to quantify the crack distribution and damage degree of sandstone specimens after blasting. The results showed that regardless of an inverse or top initiation, due to compression deformation and sliding frictional resistance, the plugging medium of the borehole is effective. The energy of the explosive gas near the top of the borehole is consumed. This affects the effective crushing of rocks near the top of the borehole, where the extent of damage to Sections Ⅰ and Ⅱ is less than that of Sections Ⅲ and Ⅳ. In addition, the analysis revealed that under conditions of top initiation, the reflected tensile damage of the rock at the free face of the top of the borehole and the compression deformation of the plug and friction consume more blasting energy, resulting in lower blasting energy efficiency for top initiation. As a result, the overall damage degree of the specimens in the top-initiation group was significantly smaller than that in the inverse-initiation group. Under conditions of inverse initiation, the blasting energy efficiency is greater, causing the specimen to experience greater damage. Therefore, in the engineering practice of rock tunnel cut blasting, to utilize blasting energy effectively and enhance the effects of rock fragmentation, using the inverse-initiation method is recommended. In addition, in three-dimensional(3D) rock blasting, the bottom of the borehole has obvious end effects under the conditions of inverse initiation, and the crack distribution at the bottom of the borehole is trumpet-shaped. The occurrence of an end effect in the 3D linear-charge blasting model experiment is related to the initiation position and the blocking condition.

Effects of Initial Defects on Effective Elastic Modulus of Concrete with Mesostructure

An exquisite mesostructure model was presented to predict the effective elastic modulus of concrete,in which concrete is realized as a four-phase composite material consisting of coarse aggregates,mortar matrix,interfacial transition zone(ITZ),and initial defects.With the three-dimensional(3D)finite element(FE)simulation,the highly heterogeneous composite elastic behavior of concrete was modeled,and the predicted results were compared with theoretical estimations for validation.Monte Carlo(MC)simulations were performed with the proposed mesostructure model to investigate the various factors of initial defects influencing the elastic modulus of concrete,such as the shape and concentration(pore volume fraction or crack density)of microspores and microcracks.It is found that the effective elastic modulus of concrete decreases with the increase of initial defects concentration,while the distribution and shape characteristics also exert certain influences due to the stress concentration caused by irregular inclusion shape.

Effect of cold-working on corrosion induced damage in lug joints

Lug joints are preferred joineries for transferring heavy loads to parent components in aerospace vehicles.They experience corrosion due to environmental conditions,improper surface finishes and rubbing displacement between the pin and lug-hole.This causes damage of different sizes and shapes near the lug-hole.Stiffness degradation due to corrosion-induced damage is modelled as a through-pit at one of the identified critical locations through stress analysis.The effect of this pit on fatigue crack initiation life is estimated.Lug-hole is pre-stressed by cold-working and the benefits of inducing plastic wake on the intended performance of the lug joint during the damages due to corrosion are brought out and compared with non-cold-worked lug-hole.Numerical analysis is performed on this lug joint with pressfit.The results obtained highlight the benefits of cold-working and the methodology can be extended to damage growth and analyse the effect of surface treatments for better structural integrity of components of aerospace vehicles.

Clustering of voltage-gated ion channels as an evolutionary trigger of myelin formation

Neurons carry apical dendrites that perceive information and a basal axon that transmits the computed information towards its to rgets.The axon originates at the axon hillock which is followed by the axon initial segment.Here,action potentials are initiated that are based on millisecond long openings of specific voltagegated sodium and potassium channels that are conserved in all parahoxozoa(Placozoa,Cnidaria,Bilateria)(Li et al.,2015).

Numerical simulation for the initial state of avalanche in polydisperse particle systems

Numerical simulation is employed to investigate the initial state of avalanche in polydisperse particle systems.Nucleation and propagation processes are illustrated for pentadisperse and triadisperse particle systems,respectively.In these processes,particles involved in the avalanche grow slowly in the early stage and explosively in the later stage,which is clearly different from the continuous and steady growth trend in the monodisperse system.By examining the avalanche propagation,the number growth of particles involved in the avalanche and the slope of the number growth,the initial state can be divided into three stages:T1(nucleation stage),T2(propagation stage),T3(overall avalanche stage).We focus on the characteristics of the avalanche in the T2 stage,and find that propagation distances increase almost linearly in both axial and radial directions in polydisperse systems.We also consider the distribution characteristics of the average coordination number and average velocity for the moving particles.The results support that the polydisperse particle systems are more stable in the T2 stage.

Multiple damage zones around hydraulic fractures generated by high-frequency pulsating hydraulic fracturing

Pulsating hydraulic fracturing(PHF)is a promising fracturing method and can generate a dynamic periodic pressure.The periodic pressure can induce fatigue failure of rocks and decrease initiation pressure of fracture.If the frequency of periodic pressure exceeds 10 Hz,the distribution of pressure along the main fracture will be heterogeneous,which is much different from the one induced by the common fracturing method.In this study,the impact of this special spatial feature of pressure on hydraulic fracture is mainly investigated.A coupled numerical simulation model is first proposed and verified through experimental and theoretical solutions.The mechanism of secondary fracture initiation around the main fracture is then discovered.In addition,sensitivity studies are conducted to find out the application potential of this new method.The results show that(1)this coupled numerical simulation model is accurate.Through comparison with experimental and theoretical data,the average error of this coupled model is less than 1.01%.(2)Even if a reservoir has no natural fracture,this heterogeneous distribution pressure can also cause many secondary fractures around the main fracture.(3)The mechanism of secondary fracture initiation is that this heterogeneous distribution pressure causes tensile stress at many locations along the main fracture.(4)Through adjusting the stimulation parameters,the stimulation efficiency can be improved.The average and amplitude of pressure can increase possibility of secondary fracture initiation.The frequency of this periodic pressure can increase number of secondary fractures.Even 6 secondary fractures along a 100 m-length main fracture can be generated.(5)The influence magnitudes of stimulation parameters are larger than ones of geomechanical properties,therefore,this new fracturing method has a wide application potential.