Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and posse...Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.展开更多
Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO)...Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.展开更多
In this paper,the effects of four sorts of silica with the particle size range of 4~10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can ...In this paper,the effects of four sorts of silica with the particle size range of 4~10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can provide the coated paper with higher density and contrast, better definition and good printing performance.展开更多
Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching...Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching model based on two step learning is established by finding a linear model by learning pure color data first and then a nonlinear modification model by learning mixed color data. Nonlinear multiple regression is used to fit the parameters of the modification model. Nonlinear modification function is discovered by BACON system by learning mixture data. Experiment results indicate that nonlinear color conversion by two step learning can further improve the accuracy when it is used for straightforward conversion from RGB to CMYK. An improved separation model based on GCR concept is proposed to solve the problem of gray balance and it can be used for three to four color conversion as well. The method proposed has better learning ability and faster printing speed than other historical approaches when it is applied to four color ink jet printing.展开更多
Inkjet priming (IJP) is a versatile technique for realizing high-accuracy patterns in a cost-effective manner. It is considered to be one of the most promising candidates to replace the expensive thermal evaporation...Inkjet priming (IJP) is a versatile technique for realizing high-accuracy patterns in a cost-effective manner. It is considered to be one of the most promising candidates to replace the expensive thermal evaporation technique, which is hindered by the difficulty of fabricating low-cost, large electroluminescent devices, such as organic light- emitting diodes (OLEDs) and quantum dot light-emitting diodes (QLEDs). In this invited review, we first introduce the recent progress of some printable emissive materials, including polymers, small molecules, and inorganic colloidal quantum dot emitters in OLEDs and QLEDs. Subsequently, we focus on the key factors that influence film formation. By exploring stable ink formulation, selecting print parameters, and implementing droplet deposition control, a uniform film can be obtained, which in turn improves the device performance. Finally, a series of impressive inkjet-printed OLEDs and QLEDs prototype display panels are summarized, suggesting a promising future for IJP in the fabrication of large and high-resolution flat panel displays.展开更多
Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing ...Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing advantages of large screen size and low cost. The challenges for realizing AM-QLED display are how to achieve high quality films through ink-jet printing, multi-color patterning, electroluminescence(EL) color purity, and high efficiency. Herein, a 2-inch diagonal full-color AM-QLEDs display with pixel density of 120 pixels per inch(PPI) fabricated by ink-jet printing technique is presented. Driven by a metal oxide TFT(MOTFT) back-panel, the display exhibits a maximum brightness of 400 cd m.2, and a color gamut of 109%(NTSC 1931). The red, green, and blue(RGB) monochrome QLEDs passive matrix panels fabricated by ink-jet printing technique have a current efficiency(CE) of 2.5, 13.9, and 0.30 cd A.1, respectively. To the best of our knowledge, the efficiencies are the highest among passive matrix QLEDs panels made by ink-jet printing technique. The ink-jet printed QDs films show good thickness uniformity due to high viscosity and low volatility of the printable inks, and no cross-contamination between adjacent pixels resulting from the hydrophobic pixel defining layer.展开更多
文摘Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.
文摘Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.
文摘In this paper,the effects of four sorts of silica with the particle size range of 4~10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can provide the coated paper with higher density and contrast, better definition and good printing performance.
文摘Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching model based on two step learning is established by finding a linear model by learning pure color data first and then a nonlinear modification model by learning mixed color data. Nonlinear multiple regression is used to fit the parameters of the modification model. Nonlinear modification function is discovered by BACON system by learning mixture data. Experiment results indicate that nonlinear color conversion by two step learning can further improve the accuracy when it is used for straightforward conversion from RGB to CMYK. An improved separation model based on GCR concept is proposed to solve the problem of gray balance and it can be used for three to four color conversion as well. The method proposed has better learning ability and faster printing speed than other historical approaches when it is applied to four color ink jet printing.
文摘Inkjet priming (IJP) is a versatile technique for realizing high-accuracy patterns in a cost-effective manner. It is considered to be one of the most promising candidates to replace the expensive thermal evaporation technique, which is hindered by the difficulty of fabricating low-cost, large electroluminescent devices, such as organic light- emitting diodes (OLEDs) and quantum dot light-emitting diodes (QLEDs). In this invited review, we first introduce the recent progress of some printable emissive materials, including polymers, small molecules, and inorganic colloidal quantum dot emitters in OLEDs and QLEDs. Subsequently, we focus on the key factors that influence film formation. By exploring stable ink formulation, selecting print parameters, and implementing droplet deposition control, a uniform film can be obtained, which in turn improves the device performance. Finally, a series of impressive inkjet-printed OLEDs and QLEDs prototype display panels are summarized, suggesting a promising future for IJP in the fabrication of large and high-resolution flat panel displays.
基金supported by the National Key Basic Research and Development Program of China (2015CB655004)the National Natural Science Foundation of China (U1601651, 51521002, U1301243, 61574061)the Educational Commission of Guangdong Province (2015B090914003, 2014KZDXM012)
文摘Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing advantages of large screen size and low cost. The challenges for realizing AM-QLED display are how to achieve high quality films through ink-jet printing, multi-color patterning, electroluminescence(EL) color purity, and high efficiency. Herein, a 2-inch diagonal full-color AM-QLEDs display with pixel density of 120 pixels per inch(PPI) fabricated by ink-jet printing technique is presented. Driven by a metal oxide TFT(MOTFT) back-panel, the display exhibits a maximum brightness of 400 cd m.2, and a color gamut of 109%(NTSC 1931). The red, green, and blue(RGB) monochrome QLEDs passive matrix panels fabricated by ink-jet printing technique have a current efficiency(CE) of 2.5, 13.9, and 0.30 cd A.1, respectively. To the best of our knowledge, the efficiencies are the highest among passive matrix QLEDs panels made by ink-jet printing technique. The ink-jet printed QDs films show good thickness uniformity due to high viscosity and low volatility of the printable inks, and no cross-contamination between adjacent pixels resulting from the hydrophobic pixel defining layer.