The grinding of ultra-fine talcum powder and its application in a polypropylene （PP） matrix were investigated. Ultra-fine talcum powder was prepared by adjusting the grinding parameters of the physical milling proce...The grinding of ultra-fine talcum powder and its application in a polypropylene （PP） matrix were investigated. Ultra-fine talcum powder was prepared by adjusting the grinding parameters of the physical milling process. The talcum powder exhibited polymodal distribution. The layered morphology of talcum particles in a horizontal sand mill was rarely damaged or destroyed. PP-talcum nanocomposites were prepared by melt blending using a twin-screw extruder. Nano talcum can be seen as a single particle, although it is not very apparent. The bending strength of talcum-filled PP was gradually increased by approximately 28%. The impact strength linearly decreased as the filler weight ratio increased. The overall maximum improvement in mechanical properties was recorded when the filler ratios increased from 15 wt% to 20 wt%.展开更多
基金Funded by the Foundation of Shanghai Science and Technology Committee (Nos.10521100602, 10DZ2211400)Foundation of Guangdong Province (No.2011A090200082)China Postdoctoral Science Foundation, and Research Foundation for the Excellent Youth Scholars of Shanghai(No.SHU-10057)
文摘The grinding of ultra-fine talcum powder and its application in a polypropylene （PP） matrix were investigated. Ultra-fine talcum powder was prepared by adjusting the grinding parameters of the physical milling process. The talcum powder exhibited polymodal distribution. The layered morphology of talcum particles in a horizontal sand mill was rarely damaged or destroyed. PP-talcum nanocomposites were prepared by melt blending using a twin-screw extruder. Nano talcum can be seen as a single particle, although it is not very apparent. The bending strength of talcum-filled PP was gradually increased by approximately 28%. The impact strength linearly decreased as the filler weight ratio increased. The overall maximum improvement in mechanical properties was recorded when the filler ratios increased from 15 wt% to 20 wt%.
