Hydrothermal Synthesis and Crystal Structure of Inorganic-organic Hybrid Compound [H_3NC_2H_4NH_2]VOPO_4

An inorganic-organic hybrid compound, [H_3NC_2H_4NH_2]VOPO_4 was synthesized by means of the hydrothermal method. It was crystallized in a monoclinic system, a space group P2_1/c, with the crystal cell parameters: a=0.92285(11) nm, b=0.72994(9) nm, c=0.98495(11) nm, β=101.280(3)°, V=0.65067(13) nm^3, M_r=223.02 g/mol, D_c=2.277 g/cm^3, Z=4, R=0.0315, ωR=0.0865, GOF=1.085. The VO_5N octahedra chains are corner-linked by PO_4 tetrahedra; the VO_5N octahedra are all trans-linked with V—O bonds being alternately short and long. The monoprotonated ethylenediamine was intercalated between the layers with one end coordinating to V and the other end as an H-bond donor interacting with a terminal O atom of PO_4 from a neighboring sheet. The elementary analysis, infrared spectrum characters and thermal stability were also given.

New Inorganic-organic Hybrid Compound Containing One Dimensional Keggin Polyoxometalate [SiW_(11)O_(39)Co]^(6-) Chains: Preparation, Characterization and Application in Chemically Bulk-modified Electrode

A new inorganic-organic hybrid compound based on polyoxometalate and organic ligand formulated as （H2bpp）3[SiWlIO39Co]-2H20（1）[bpp=l,3-bis（4-pyridyl）propane] was hydrothermally synthesized and structurally characterized by elemental analysis, single-crystal X-ray diffraction, IR, TG, and cyclic voltammetry. Single-crystal X-ray diffraction analysis reveals that compound 1 consists of interesting cobalt-monosubstituted POMs one dimensional chain together with protonated bpp ligands. Additionally, the polyoxoanions combined with the discrete organic substrates by hydrogen bond interactions to afford a supramolecular 3D network structure. The hybrid compound 1 was used as a bulk modifier to fabricate a three-dimensional chemically modified carbon paste electrode（1-CPE） by direct mixing. The electrochemical behavior and electrocatalysis of 1-CPE were studied in detail. The results indicate that 1-CPE has good electrocatalytic activities toward the reduction of nitrite or bromate in 1 mol/L 1-12SO4 aqueous solution. 1-CPE shows remarkable stability that can be ascribed to the insolubility of compound 1 and the supramolecular interactions existed between 1D POM anion chains and organic ligand bpp, which is very important for practical applications in electrode modification.

Rare earth inorganic-organic hybrid compounds based on Keggin-type polyoxometalate {SiW_(12)} with fast-responsive photochromism and switchable luminescence properties

Four rare earth inorganic-organic hybrid compounds based on Keggin-type polyoxometalate {SiW_(12)}with general formula [{RE(DMF)_(4)(H_(2)O)_4RE(DMF)_(6)}_(2){SiW_(12)O_(40)}_(3)](RE = La(1),Pr(2),Sm(3),Eu(4),DMF=N,N-dimethylformamide) were synthesized by the conventional solution method.Structure analyses indicate that four compounds are isostructural and are all built from three [SiW_(12)O_(40)]^(4-) polyoxoanions and DMF ligands linked by RE^(3+).Compounds 1-4 are extremely sensitive to UV light and present excellent photochromic properties,in which the coloring and fading time of samples are both no more than 2 min,and the reversible coloring-fading process can be repeated for at least 10 cycles with little fatigue,suggesting that compounds 1-4 can be a series of fast-responsive and durable photochromic materials.Moreover,the solid-state photoluminescence spectra of compounds 3(Sm) and 4(Eu)display strong characteristic emissions of rare earth ions based on f-f transitions.Meanwhile,compound4(Eu) has a longer fluorescence lifetime up to 566.74 μs.Notably,co mpounds 3(Sm) and 4(Eu) exhibit the switchable luminescence behavior induced by photochromism,which allows them to be used as potential molecular switches.

Inorganic-organic hybrid photocatalysts:Syntheses,mechanisms,and applications

Inorganic-organic hybrid materials are promising for application in the field of photocatalysis because of their excellent properties.Therefore,their syntheses,mechanisms,and applications are reviewed in this paper.First,we introduce the role of inorganic-organic photocatalysts,their advantages and disadvantages,and their design principles.Second,we present the top-down and bottom-up synthesis methods of the hybrid materials.The interaction between inorganic and organic components in hybrid materials is discussed,followed by how to improve inorganic-organic photocatalysts.Third,the applications of hybrid materials in the field of photocatalysis,such as realizing hydrogen evolution,organic pollutant degradation,heavy metals and CO_(2) reduction,sterilization,and nitrogen fixation,are examined.Finally,the application prospects and development directions of inorganic-organic hybrid materials are explored and the unsolved problems are described.

A Novel Inorganic-organic Hybrid Borate with Unique One-dimensional Infinite Aluminium-oxygen Chains

A novel inorganic-organic hybrid borate,[Al2（fum）（H3BO3）（OH） 4]n·n（H3BO3） （1,H2fum = fumaric acid） ,has been synthesized and characterized by single-crystal X-ray diffraction,FTIR and elemental analysis. Crystal data for compound 1： orthorhombic,space group Pnma,a = 14.108（3） ,b = 6.9412（14） ,c = 14.995（3）A,V = 1468.3（5）A^3,Z = 4,Mr = 359.72,Dc = 1.627 g/cm^3,μ = 0.254 mm^-1,F（000） = 736,the final R = 0.0492 and wR = 0.1650 with I 〉 2σ（I） . In compound 1,each Al^Ⅲ ion is coordinated by six oxygen atoms to adopt a distorted octahedral geometry. Both fumarate anion and the coordinated boric acid act as bidentate bridging ligands to link two neighboring Al^Ⅲ centers simultaneously. Each Al^Ⅲ ion is bridged by two μ2-hydroxyl ligands to construct an infinite wave-like [Al2（fum）（H3BO3）（OH） 4]n chain. These one-dimensional chains form hydrogen bonds with free boric acid molecules giving rise to a three-dimensional supramolecular network.

An ionic 2D inorganic-organic hybrid of tris[((1H-tetrazol-5-yl)methyl)morpholine] dodecatungstophosphate(Ⅴ) pentahydrate:Synthesis X-ray crystal structure and spectroscopic characterizations

A unique ionic hybrid material[C_6H_(12)N_5O]_3[(PO_4)W__(12)O_(36)]·5H_2O has been synthesized from the reaction of((1H-tetrazole-5- yl)methyl)morpholine andα-H_3[(PO_4)W_(12)O_(36)]·21H_2O.It has successfully been characterized by elemental analysis,IR and ~1H NMR spectroscopies,TGA and single-crystal X-ray diffraction method.The title compound is constructed from the three [C_6H_(12)N_5O]^+ cations andα-Keggin[(PO_4)W_(12)O_(36)]^(3-) polyoxoanion.The most remarkable structural feature of this hybrid can...

A New Inorganic-organic Hybrid Based on Biisoquinoline and Hexachloridostannate:Structure, Photoluminescence, Electrochemical Behavior and Theoretical Study

A new inorganic-organic hybrid constructed from biisoquinoline dication and tin halide, [（BIQBT）（Sn Cl6）]n（1, BIQBT = 1,4-bis（isoquinoline） butane）, has been synthesized and structurally determined by X-ray diffraction method. 1 crystallizes in the monoclinic system, space group Cc with Mr = 644.82, a = 16.589（3）, b = 18.388（4）, c = 8.5532（17）A, β = 108.75（3）°, V = 2470.6（9） A3, Z = 4, Dc = 1.736 g/cm^3, F（000） = 1281, μ（Mo Kα） = 1.697 mm^–1, the final R = 0.0197 and wR = 0.0493 for 4614 observed reflections with I 〉 2（I）. 1 consists of BIQBT^2＋dications and mononuclear hexachloridostannate Sn Cl62- anion, and hydrogen bonds among them contribute to the formation of a 1-D chain. Strong fluorescence can be detected in 1, which was explained by theoretical calculation. Its electrochemical behavior was investigated, and the theoretical calculations reveal that the π···π stacking interaction is dominated for their structural stabilization.

Supramolecular Structural Inorganic-organic Hybrid[(4-Bromoanilimiun)([18]crown-6)]3[PMo(12)O(40)]·CH3CN

A novel supramolecular structural inorganic-organic hybrid [（4-bromoanilimiun）（[18]crown-6）]3[PMo（12）O40]·CH3 CN has been synthesized through standard solvent evaporated method. The structure of the title compound was determined through single-crystal X-ray diffraction analysis. It crystallizes in monoclinic system with P21/n space group. The crystal data are a = 18.9529（4）, b = 26.4444（5）, c = 19.0985（4） A, β = 90.132（6）o, V = 9572.1（3） A^3, Z = 4, Dc= 2.203 g·cm^（–1）, μ = 14.956 mm^（–1）, F（000） = 6192, S = 1.098, the final R = 0.0859 and w R（I 〉 2σ（I）） = 0.2100. Supramolecular cations are constructed through strong N–H…O hydrogen bonding interaction between the six oxygen atoms of [18]crown-6 molecule and nitrogen atom of（4-bromoanilimiun） cation. Three kinds of different arranged supramolecular cations exist in the title compound, which are filled into the large space formed by [PMo（12）O40] polyoxoanions. Thermogravimentic differential thermal analysis revealed that hydrogen bonding interaction and intermolecular interaction play an important role in maintaining the stability of the title compound.

Synthesis, Structure, and Photoluminescence Property of a Novel One-dimensional Inorganic-organic Hybrid Gallophosphate JGP-2

A novel one-dimensional inorganic-organic hybrid gallophosphate compound, Ga（2,2＇-bipy）（HPO4）. （H2PO4）（denoted JGP-2） was synthesized hydrothermally with 2,2＇-bipyridine as a ligand and characterized by X-ray powder diffraction （XRD）, elemental analysis, inductively coupled plasma（ICP）, TGA analysis, solid-state ^31p NMR, and luminescence spectra and structurally determined by single-crystal X-ray diffraction analysis. JGP-2 crystallized in the triclinic system, space group P^-1（No.2）, with a=0.7818（1） nm, b=0.8611 （2） nm, c=1.0908（2） nm, V=0.6727（2） nm^3 and Z=2 with R1=0.0223. The structure of JGP-2 was built up by alternate arrangement of GaO4N2 octahedra, and HPO4（or H2PO4） tetrahedra to form an infinite one-dimensional corner-sharing-corner（CSC） chain. Through P sites, the CSC chains link with an unusual edge-sharing dimmer, Ga2F4（H2O）2, giving rise to a 4,10-membered ring net layered structure of JGP-7. On excitation at 254 nm, JGP-2 can emit strong blue light at ,λmax=388 rim. JGP-7 presents a strong fluorescence emission band centered at 394 nm（λex=340 nm）, the emission energy of JGP-7 is red-shifted comoared with that of JGP-2.

The Inorganic-organic Hybrid Junction with n-ZnO Nanorods/p-polyfluorene Structure Grown with Low-temperature Aqueous Chemical Growth Method

The inorganic-organic hybrid junction was synthesized on ITO glass substrate, which was consisted of an n-type ZnO nanorods （NRs） grown by low-temperature aqueous chemical growth method and a p-type polyfluorene （PF） organic film fabricated by spin-coating. The experimental results indicate that densely and uniformly distributed ZnO nanorods are successfully grown on the PF layer. The thickness of the PF layer plays a dominant role for the current-voltage （I-V） characteristic of the ZnO NRs/PF inorganic-organic hybrid junction device, and a p-n junction with obviously rectifying behavior is achieved with optimal PF layer thickness. The photoluminescence （PL） spectrum covering the broad visible range was obtained from the n-ZnO nanorods/p-polyfluorene （PF） structure, which was originated from the combination of the PF-related blue emission and the ZnO-related deep level emission.

Hydrothermal synthesis and characterization of two novel inorganic-organic hybrid materials

By using different organic ligands, two 3D inorganic-organic hybrid compounds Co（C4H4N2）（VO3）2 1 and Co（C12H12N2）（VO3）2 2 were synthesized by hydrothermal reaction and characterized by X-ray crystallography. Crystal data： 1. crystal system orthorhombic, space group Pnna, a=1 0.188（2） A, b=1 1.497（2） A, c=7.3975（15） A, V=866.5（3） A^3, Z=4, Dcalcd= 2.705 g/cm^3; 2. crystal system triclinic, space group P1^- （No. 2）, a=8.3190（17） A, b=8.4764（17） A, c=1 1.183（2） A, a=95.48（3）°, β=92.03（3）°, γ=107.24（3）°,V=748.0（3） A^3, Z=2, Dcalcd= 1.958 g/cm^3. The framework of compound 1 contains both {Co（C4H4N2）} and infinite metavanadate chains. Crystal structure of compound 2 is constructed with inorganic {CoV2O6} layers across-linked by organic 1,2-bis（4-pyridyl） ethane ligands. The two compounds are thermally stable to approximately 410 ℃ and 350 ℃, respectively. Their optical band gaps are determined to be 2.13 eV and 2.12 eV by UV-VIS-NIR diffuse reflectance spectra, which revealed their nature of semiconductor and optical absorption features.

Synthesis and Characterizaion of a New Inorganic-organic Sulfate Compound——Crystal Structure of [Ni(H_2O)_6][H_2N(C_2H_4)_2NH_2](SO_4)_2

Ni(H_2O)_6][H_2N(C_2H_4)_2NH_2](SO_4)_2 is an inorganic-organic compound with a new open framework synthesized by hydrothermal method, and characterized by means of single-crystal diffraction and spectroscopic data. The compound crystallized in a monoclinic space group P2_1/n with a=1.29089(2) nm, b=1.06301(3) nm, c=1.33202(4) nm, β=114.0870(10)°, V=1.67127(8) nm 3, Z=4, and was solved by using the direct method and the least-squares refinement converged at R=0.0214[I>2σ(I)]. The structure consists of isolated Ni(H_2O)_6 octahedra and SO_4 tetrahedra, with both of them hydrogen-bonded to piperazine cations.

Nanojunctions Contributing to High Performance Thermoelectric ZnO-Based Inorganic-Organic Hybrids

Organic-inorganic nanojunctions can result in a selective scattering of charge carrier depending on their energy, which leads to a simultaneous increase in the Seebeck coefficient S and the power factor. In this work, the nanojunction is successfully employed at the organic-inorganic semiconductor interface of polyparaphenylene （PPP） and Zn1-xAgxO nanoparticles through the sol-gel method. The presence of nanoinclusions PPP in Zno.gAgoa 0 matrix is found to be effective in improving the figure of merit （ZT） by the dual effects of an increase in the power factor consistent with the heterojunetion effect and a reduction in thermal conductivity. Zno.gAgo.10/0.1 wt% PPP exhibits a maximum figure of merit, i.e., ZT= 0.22.

Synthesis and Structure of a Novel Chain-like Inorganic-organic Hybrid Constructed from Isopolyanion and Oxalato-bridged Dinuclear Copper Complex

A novel inorganic-organic hybrid based on isopolyanion,{[Cu2（phen）2（μ-ox）][H2Mo8O26]}·4EtOH·Et2O（1） （phen=phenanthroline,ox=oxalate）,was synthesized under open-air mild reaction conditions,and characterized by elemental analysis,IR,ICP,TG and single crystal X-ray diffraction analysis.The crystal structure belongs to triclinic system with space group Pī and cell parameters：a=1.1075（5） nm,b=1.1608（5） nm,c=1.3333（5） nm,α=91.683（5）o,β=113.996（5）o,γ=112.170（5）o,V=1.4159（10） nm3,Mr=2017.44,Z=1,Dc=2.366 g/cm3 and F（000）=980.0.The structure of hybrid 1 is a 1D chain constructed of alternating octamolybdate isopolyanions [β-（Mo8O26）4-] and oxalato-bridged dinuclear copper complex cations [Cu2（phen）2（μ-ox）]2＋.Ultimately,a 3D supramolecular network was formed by hydrogen bond interactions among the adjacent chains.The result shows that hybrid 1 is the first example of inorganic-organic hybrid constructed from isopolyanion and oxalato-bridged dinuclear copper complex fragment （CCDC No.665101）.

Synthesis and Characterization of Poly(St-co-BA) Latex with an Organic-Inorganic Hybrid Compound as Emulsifier

A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were actually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.

Hydrothermal Synthesis and Characterization of a Novel Organic Inorganic Hybrid Compound [Co(dien)_2](dienH_3)(H_3O)_7[P_2Mo_5O_(23)]_2·14H_2O

A new compound,[Co（dien）2]（dienH3）（H3O）7[P2Mo5O23]2·14H2O, has been hydrothermallly synthesized by using Na2MoO4,CoCl2, H3PO4 and dien, and structurally characterized by elemental analysis, X-ray powder diffraction analysis, SEM, IR and TG analysis. The results show that the compound is composed of a polyanion [P2Mo5O23]2^12, complex [Co（dien）2]^2＋ cation, protonated [dienH3]^3＋ , and forteen crystallization water molecule.

Dividend Payments with a Hybrid Strategy in the Compound Poisson Risk Model

In this paper, a hybrid dividend strategy in the compound Poisson risk model is considered. In the absence of dividends, the surplus of an insurance company is modelled by a compound Poisson process. Dividends are paid at a constant rate whenever the modified surplus is in a interval;the premium income no longer goes into the surplus but is paid out as dividends whenever the modified surplus exceeds the upper bound of the interval, otherwise no dividends are paid. Integro-differential equations with boundary conditions satisfied by the expected total discounted dividends until ruin are derived;for example, closed-form solutions are given when claims are exponentially distributed. Accordingly, the moments and moment-generating functions of total discounted dividends until ruin are considered. Finally, the Gerber-Shiu function and Laplace transform of the ruin time are discussed.

Effects of a GA3/4PU-30 compound (90-09) on leaf senescence of hybrid rice

90-09 is a cmpound made with GA3,4PU-30and some trace elements(B ete.).To studythe effects of 90-09 on the leaf senescence ofhybrid rice leaf,the changes of activities ofsome degradation enzyme and the contents ofendogenous hormones(ABA,ZRs,GAs,andIAA),protein,and nucleic acids were mea-sured during leaf senescence. Shanyou 63,an indica hybrid rice,wasused in this experiment.Rice plants were firstsprayed with 90-09(115 ml/hm~2) solution 10d after heading,followed by two more sprayswith once a week.The controlled plants weresprayed with water only.

新型混合式贯通牵引供电系统及其复合控制策略

电分相与负序等电能质量问题是制约电气化铁路向高速化、重载化发展的桎梏。贯通牵引供电系统为消弭上述问题提供了契机,但既有贯通方案依然存在所需器件数目多、改造成本高、可靠性差等弊端。为此,在充分利用既有牵引变压器基础上,该文设计一种新型混合式贯通牵引供电装置。该装置通过共直流侧与功率均分手段有效抵消输入侧纹波功率,降低有源/无源器件数目与电容容量。同时,针对直流侧二次纹波与负荷功率冲击,提出一种输入端口复合控制策略,有效解决纹波传递与冲击波动问题。最后通过仿真与实验验证所提装置及其控制策略的可行性与可靠性。

Microstructures and properties of welded joint of aluminum alloy to galvanized steel by Nd:YAG laser + MIG arc hybrid brazing-fusion welding

According to the differences in melting point between aluminum alloy and steel, 6013-T4 aluminum alloy was joined to galvanized steel by large spot Nd：YAG laser ＋ MIG arc hybrid brazing-fusion welding with ER4043（AlSi5） filler wire. The microstructures and mechanical properties of the brazed-fusion welded joint were investigated. The joint is divided into two parts of fusion weld and brazed seam. There is a zinc-rich zone at fusion weld toe, which consists of α（Al）-Zn solid solution and Al-Zn eutectic. The brazed seam is the Fe-Al intermetallic compounds （IMCs） layer of 2-4μm in thickness, and the IMCs include FeAl2, Fe2Al5 and Fe4Al13. FeAl2 and Fe2Al5 are located in the compact reaction layer near the steel side, and Fe4Al13 with tongue shape or sawtooth shape grows towards the fusion weld. The tensile strength of the joint firstly increases and then decreases as the welding current and laser power increase, the highest tensile strength can be up to 247.3 MPa, and the fracture usually occurs at fusion zone of the fusion weld. The hardness is the highest at the brazed seam because of hard Fe-Al IMCs, and gradually decreases along the fusion weld and galvanized steel, respectively.