An environmental input output model (EIOM) was introduced to the regional solid waste management sectors, which can reflect the direct and indirect relations between the environment and the regional economy developme...An environmental input output model (EIOM) was introduced to the regional solid waste management sectors, which can reflect the direct and indirect relations between the environment and the regional economy development. Some details about how to use the EIOM was discussed. The EIOM was applied to the Changsha City in China. The example results indicate that much useful information related to the environment and the regional economy development can be gained from the solution of the EIOM. Thus, the EIOM can be used as a useful tool for the sustainable development planning including the solid waste management sectors.展开更多
Based on the Data Envelopment Analysis method,and by using CCR and BCC model,Super Efficiency model and Malmquist model guided by input efficiency,the input-output efficiency of elements of urban construction land in ...Based on the Data Envelopment Analysis method,and by using CCR and BCC model,Super Efficiency model and Malmquist model guided by input efficiency,the input-output efficiency of elements of urban construction land in different jurisdictions of Beijing from 2005 to 2015 was studied.The results showed that there were obvious differences between input-output efficiency of elements of urban construction land in different jurisdictions of Beijing,among which the efficiency of the core area of capital,Yanqing District,Fangshan District and Huairou District was relatively high,while the efficiency of Daxing District,Fengtai District and Miyun District was relatively low.There was no obvious correlation between efficiency differentiation and location factors,which is mainly caused by whether the land use in each jurisdiction has scale effect,whether the technology is improved,whether the input is redundant and whether the output is insufficient.For the jurisdiction of inefficient land use,we should strengthen the consciousness of intensive land use,improve the technical level,appropriately reduce the redundancy of input elements,and pay attention to the output of social and ecological benefits.展开更多
The paper assesses the economic impacts of the natural forest protection program (NFPP) on the economy of Yunnan Province, China, in terms of gross output, value added, employment, and household income. An input-outpu...The paper assesses the economic impacts of the natural forest protection program (NFPP) on the economy of Yunnan Province, China, in terms of gross output, value added, employment, and household income. An input-output model is developed to estimate NFPP's economic impacts by means of backward linkages in the forestry sector and logging and haulage sector. It is found that the NFPP has positive impacts on gross output, value added and household income in the initial year, but has significantly negative impacts on the regional economy in the following years as the investment decreases.展开更多
Goal oriented( GO) methodology is a kind of success oriented system reliability analysis method and has been used widely.The repairable system with dual input closed-loop feedback link( DICLFL) considering shutdown co...Goal oriented( GO) methodology is a kind of success oriented system reliability analysis method and has been used widely.The repairable system with dual input closed-loop feedback link( DICLFL) considering shutdown correlation didn't make reliability analysis accurately based on existing GO methodology. So, a reliability analysis method used to deal with DICLFL considering shutdown correlation is provided based on GO methodology.Firstly, a new operator, which is used to describe DICLFL considering shutdown correlation,whose number is 1,is created and named as Type 9C operator. And then,the formulas of type 9C operator are derived based on Markov process theory. Finally,the new method presented in this paper is adopted to conduct the reliability analysis of an electro-hydraulic servo speed control system. The analysis result is compared with those of Monte Carlo simulation and fault tree analysis( FTA). The comparison results show that this new reliability analysis method based on GO methodology is feasible and meaningful for reliability analysis of repairable systems with DICLFL considering shutdown correlation.Meantime,it will be useful for more other applications.展开更多
Globally,educational institutions have reported a dramatic shift to online learning in an effort to contain the COVID-19 pandemic.The fundamental concern has been the continuance of education.As a result,several novel...Globally,educational institutions have reported a dramatic shift to online learning in an effort to contain the COVID-19 pandemic.The fundamental concern has been the continuance of education.As a result,several novel solutions have been developed to address technical and pedagogical issues.However,these were not the only difficulties that students faced.The implemented solutions involved the operation of the educational process with less regard for students’changing circumstances,which obliged them to study from home.Students should be asked to provide a full list of their concerns.As a result,student reflections,including those from Saudi Arabia,have been analysed to identify obstacles encountered during the COVID-19 pandemic.However,most of the analyses relied on closed-ended questions,which limited student involvement.To delve into students’responses,this study used open-ended questions,a qualitative method(content analysis),a quantitative method(topic modelling),and a sentimental analysis.This study also looked at students’emotional states during and after the COVID-19 pandemic.In terms of determining trends in students’input,the results showed that quantitative and qualitative methods produced similar outcomes.Students had unfavourable sentiments about studying during COVID-19 and positive sentiments about the face-to-face study.Furthermore,topic modelling has revealed that the majority of difficulties are more related to the environment(home)and social life.Students were less accepting of online learning.As a result,it is possible to conclude that face-to-face study still attracts students and provides benefits that online study cannot,such as social interaction and effective eye-to-eye communication.展开更多
In general, the seismic response analysis in earthquake engineering assumes that the vibration parameters of the target and the contact surface of the external media are identical,i. e., single point input. However, e...In general, the seismic response analysis in earthquake engineering assumes that the vibration parameters of the target and the contact surface of the external media are identical,i. e., single point input. However, earthquake energy has an attenuation phenomenon in wave propagation,so a wide range of soil slopes and the external medium contact surface of different input points on motion are not identical. If we consider single point input only, it may not correspond with reality, so it is necessary to carry out research on multi-point input methods. Based on the 2-D slope model,single-point input and multi-point input are performed respectively to analyze and compare their similarities and differences in the perspectives of the characteristics of seismic response of soil layer and plastic zone distribution to provide a reference for the seismic design of slopes. The results show that in the perspective of soil seismic response analysis,the peak acceleration output and peak velocity output under multi-point input are greater than the peak values under single point input at the same monitoring point,the peak appearing time is also earlier than that of the single point input; in terms of the plastic zone distribution,the multi-point effect is manifested as the presence of more obvious tensile shear failures; in the perspective of safety coefficient,the safety coefficient under each multi-point input is smaller than that of single point input,a difference of about 7 % or so. In summary,multi-point input is more reasonable and practical than single point input,so multi-point input should be considered in seismic design.展开更多
This work proposes a robust fault detection and isolation scheme for discrete-time systems subject to actuator faults,in which a bank of H_/H∞ fault detection unknown input observers(UIOs) and a zonotopic threshold a...This work proposes a robust fault detection and isolation scheme for discrete-time systems subject to actuator faults,in which a bank of H_/H∞ fault detection unknown input observers(UIOs) and a zonotopic threshold analysis strategy are considered. In observer design, finite-frequency H_ index based on the generalized Kalman-Yakubovich-Popov lemma and H∞ technique are utilized to evaluate worst-case fault sensitivity and disturbance attenuation performance, respectively. The proposed H_/H∞ fault detection observers are designed to be insensitive to the corresponding actuator fault only, but sensitive to others.Then, to overcome the weakness of predefining threshold for FDI decision-making, this work proposes a zonotopic threshold analysis method to evaluate the generated residuals. The FDI decision-making relies on the evaluation with a dynamical zonotopic threshold. Finally, numerical simulations are provided to show the feasibility of the proposed scheme.展开更多
In recent years improper allocation of safety input has prevailed in coal mines in China, which resulted in the frequent accidents in coal mining operation. A comprehensive assessment of the input efficiency of coal m...In recent years improper allocation of safety input has prevailed in coal mines in China, which resulted in the frequent accidents in coal mining operation. A comprehensive assessment of the input efficiency of coal mine safety should lead to improved efficiency in the use of funds and management resources. This helps government and enterprise managers better understand how safety inputs are used and to optimize allocation of resources. Study on coal mine’s efficiency assessment of safety input was con- ducted in this paper. A C2R model with non-Archimedean infinitesimal vector based on output is established after consideration of the input characteristics and the model properties. An assessment of an operating mine was done using a specific set of input and output criteria. It is found that the safety input was efficient in 2002 and 2005 and was weakly efficient in 2003. However, the effi- ciency was relatively low in both 2001 and 2004. The safety input resources can be optimized and adjusted by means of projection theory. Such analysis shows that, on average in 2001 and 2004, 45% of the expended funds could have been saved. Likewise, 10% of the safety management and technical staff could have been eliminated and working hours devoted to safety could have been reduced by 12%. These conditions could have given the same results.展开更多
Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calcul...Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995–2004 and to analyze the demateri- alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro- leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco- nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min- ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources’ cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.展开更多
Because conditions for the grain production are not favorable and the input in the production factors ofmodern agriculture is not sufficient, the grain supply has been less than the demand for a long time. By means of...Because conditions for the grain production are not favorable and the input in the production factors ofmodern agriculture is not sufficient, the grain supply has been less than the demand for a long time. By means of greycorrelation analysis, this paper deals with the correlation situation among such input factors as the grain sown area, thetotal power of agricultural machinery, the fertilizer utilization volume, the actual irrigation area, the damage area, thenumber of farming labor force, in order to understand the major restricting and driving forces that have affected thegrain output in the recent 23 years. The analysis shows that the grain sown area and fertilizer utilization volume are thetwo most important leading factors that affect grain production in Guizhou Province, while the damage area and the totalpower of the farming-used machines are the following factors. Fertilizer utilization volume and the actual agriculturalmachinery and irrigation area are the two increasingly influential factors that affect grain production. The influence of thefarming labor force upon grain production became less strong. The main measures to increase grain production outputin Guizhou Province are to stabilize the arable land, increase the actual irrigation area, expedite the transfer of thefarming labor force and increase the input of modern agriculture.展开更多
Comparing conventional practice and experience of some foreign countries financing their basic research programs, this article analyzes and explores the scope, funding principles, channels and forms of China’s basic ...Comparing conventional practice and experience of some foreign countries financing their basic research programs, this article analyzes and explores the scope, funding principles, channels and forms of China’s basic research input.展开更多
As China's energy intensity fluctuated in recent years, it is necessary to examine whether this fluctuation happened at a regional level. This paper establishes a decomposition model by using the structural decomp...As China's energy intensity fluctuated in recent years, it is necessary to examine whether this fluctuation happened at a regional level. This paper establishes a decomposition model by using the structural decomposition analysis (SDA) method at a regional level. Then this model is employed to empirically analyze the changes of Beijing's energy intensity. The conclusions are as follows: during 2002-2010, except petroleum, the energy intensity decreased and the changes were mostly attributed to the technology changes, while the final use variation actually increased the energy intensity; comparing different periods of 2002-2010, the decline rates of energy intensity for coal and hydropower were decreasing, resulting from the production technology being more energy-intensive than before; the energy intensity changes of petroleum firstly increased substantially and then decreased moderately.展开更多
A hierarchical structural decomposition analysis(SDA) model has been developed based on process-level input-output(I-O) tables to analyze the drivers of energy consumption changes in an integrated steel plant during 2...A hierarchical structural decomposition analysis(SDA) model has been developed based on process-level input-output(I-O) tables to analyze the drivers of energy consumption changes in an integrated steel plant during 2011-2013. By combining the principle of hierarchical decomposition into D&L method, a hierarchical decomposition model for multilevel SDA is obtained. The developed hierarchical IO-SDA model would provide consistent results and need less computation effort compared with the traditional SDA model. The decomposition results of the steel plant suggest that the technology improvement and reduced steel final demand are two major reasons for declined total energy consumption. The technical improvements of blast furnaces, basic oxygen furnaces, the power plant and the by-products utilization level have contributed mostly in reducing energy consumption. A major retrofit of ancillary process units and solving fuel substitution problem in the sinter plant and blast furnace are important for further energy saving. Besides the empirical results, this work also discussed that why and how hierarchical SDA can be applied in a process-level decomposition analysis of aggregated indicators.展开更多
The dynamic input output model is well known in economic theory and practice.In this paper,the asymptotic stability and balanced growth solutions of the dynamic input output system are considered.Under some natural ...The dynamic input output model is well known in economic theory and practice.In this paper,the asymptotic stability and balanced growth solutions of the dynamic input output system are considered.Under some natural assumptions which do not require the technical coefficient matrix to be indecomposable,it has been proved that the dynamic input output system is not asymptotically stable and the closed dynamic input output model has a balanced growth solution.展开更多
This paper established a by sector water consumption and economy analysis integrated model with input–output analysis method. The model can be used to identify the relationships between economic activities and the di...This paper established a by sector water consumption and economy analysis integrated model with input–output analysis method. The model can be used to identify the relationships between economic activities and the direct water consumption, the total water consumption and the intersectoral water transaction for detailed sectors in regional economy. The method is applied to Hai River Basin in China that is characterized by water shortage. The results found that in Hai River Basin, agriculture sector is responsible for 81.2% of the direct total water consumption in the region, but industrial and service sectors account for 53.2% of the indirect total water consumption. To 24 industrial and service sectors, their ratios of indirect water consumption to total water consumption belong to [90%, 99%]. To per unit output, water consumption intensity was highest in agriculture sector 1 at 96.91 m3 per thousand Yuan, the value of 28 industrial and service sectors were smaller than 1. Products of sector 1, sector 24, sector 3, sector 12, sector 6, sector 11 and sector 10 are the main suppliers of indirect water.展开更多
Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvabili...Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvability,continuity and surjectivity,and some fixed point and surjectivity methods in nonlinear analysis were used to deal with these questions. As a result,the main theorems are obtained,which provide some sufficient criterions to solve above questions described by the boundary properties of the enterprises consuming operator.展开更多
Base on the framework of material flow analysis (MFA) proposed by Eurostat, this paper collected relateddata and conducted a regional MFA for the Chengyang District in Qingdao. The indicators such as Direct Material I...Base on the framework of material flow analysis (MFA) proposed by Eurostat, this paper collected relateddata and conducted a regional MFA for the Chengyang District in Qingdao. The indicators such as Direct Material Input(DMI), Direct Material Consumption (DMC) and Exports are calculated or estimated for the period of year 1995through 2004. Several derivable indicators defining direct material productivity and material intensity are also evaluatedand some valuable conclusions were drawn. DMI in absolute number increased from about 1645.9 kilotons in 1995 toabout 8052.5 kilotons in 2004. Imports contribute to about 47 to 69% of DMI, and the biggest component of imports isfossil fuel that approximately accounts for 50% of imports. DMI per capita of Chengyang District increased rapidly andreached 17.4 tons in 2004. Compared with other five economies studied by WRI, material consumption intensity ofChengyang District is significantly lower than developed countries, which indicates that Chengyang District is still in adevelopment stage. The direct material productivity (actual GDP per DMI) increased 59.1% from 1995 to 2004 and hasbeen higher than either of studies in China, which indicates efficiency of resources utilization has improved obviously inChengyang District. But there was significant increase in material input in the last decade, which shows that rapidincrease of economy is highly dependent on requirement and consumption of natural resources. Therefore, in order topromote the sustainability, it is essential to develop circular economy and improve utilization efficiency of resources.展开更多
As a basic industry,agriculture has a far-reaching impact on national economy. Based on input-output tables of China in 2005 and2010,this paper gives a deep insight into the relationship between agriculture and nation...As a basic industry,agriculture has a far-reaching impact on national economy. Based on input-output tables of China in 2005 and2010,this paper gives a deep insight into the relationship between agriculture and national economy and its macroeconomic effects by the methods of input-output analysis,industrial correlation and macroeconomic effect analysis. The results show that the agricultural development is highly dependent on the national economy,but makes low contribution; agriculture contributes to promoting employment and improving the structure of national income distribution; despite the government's tax incentive,the agricultural equipments are updated slowly,and the corporate profits are at low level; agricultural export effect is far below the average industry level,but the import effect increases over the years,and final products are often used for domestic consumption. Finally,we set forth recommendations for improving the development of agriculture and national economy.展开更多
Agricultural input and output status in southern Xinjiang,China is introduced,such as lack of agricultural input,low level of agricultural modernization,excessive fertilizer use,serious damage of environment,shortage ...Agricultural input and output status in southern Xinjiang,China is introduced,such as lack of agricultural input,low level of agricultural modernization,excessive fertilizer use,serious damage of environment,shortage of water resources,tremendous pressure on ecological balance,insignificant economic and social benefits of agricultural production in southern Xinjiang,agriculture remaining a weak industry,agricultural economy as the economic subject of southern Xinjiang,and backward economic development of southern Xinjiang.Taking the Aksu area as an example,according to the input and output data in the years 2002-2007,input-output model about regional agriculture of the southern Xinjiang is established by principal component analysis.DPS software is used in the process of solving the model.Then,Eviews software is adopted to revise and test the model in order to analyze and evaluate the economic significance of the results obtained,and to make additional explanations of the relevant model.Since the agricultural economic output is seriously restricted in southern Xinjiang at present,the following countermeasures are put forward,such as adjusting the structure of agricultural land,improving the utilization ratio of land,increasing agricultural input,realizing agricultural modernization,rationally utilizing water resources,maintaining eco-environmental balance,enhancing the awareness of agricultural insurance,minimizing the risk and loss,taking the road of industrialization of characteristic agricultural products,and realizing the transfer of surplus labor force.展开更多
文摘An environmental input output model (EIOM) was introduced to the regional solid waste management sectors, which can reflect the direct and indirect relations between the environment and the regional economy development. Some details about how to use the EIOM was discussed. The EIOM was applied to the Changsha City in China. The example results indicate that much useful information related to the environment and the regional economy development can be gained from the solution of the EIOM. Thus, the EIOM can be used as a useful tool for the sustainable development planning including the solid waste management sectors.
文摘Based on the Data Envelopment Analysis method,and by using CCR and BCC model,Super Efficiency model and Malmquist model guided by input efficiency,the input-output efficiency of elements of urban construction land in different jurisdictions of Beijing from 2005 to 2015 was studied.The results showed that there were obvious differences between input-output efficiency of elements of urban construction land in different jurisdictions of Beijing,among which the efficiency of the core area of capital,Yanqing District,Fangshan District and Huairou District was relatively high,while the efficiency of Daxing District,Fengtai District and Miyun District was relatively low.There was no obvious correlation between efficiency differentiation and location factors,which is mainly caused by whether the land use in each jurisdiction has scale effect,whether the technology is improved,whether the input is redundant and whether the output is insufficient.For the jurisdiction of inefficient land use,we should strengthen the consciousness of intensive land use,improve the technical level,appropriately reduce the redundancy of input elements,and pay attention to the output of social and ecological benefits.
文摘The paper assesses the economic impacts of the natural forest protection program (NFPP) on the economy of Yunnan Province, China, in terms of gross output, value added, employment, and household income. An input-output model is developed to estimate NFPP's economic impacts by means of backward linkages in the forestry sector and logging and haulage sector. It is found that the NFPP has positive impacts on gross output, value added and household income in the initial year, but has significantly negative impacts on the regional economy in the following years as the investment decreases.
基金Technical Basis Projects of China's MIIT(Nos.ZQ092012B003,2012090003)
文摘Goal oriented( GO) methodology is a kind of success oriented system reliability analysis method and has been used widely.The repairable system with dual input closed-loop feedback link( DICLFL) considering shutdown correlation didn't make reliability analysis accurately based on existing GO methodology. So, a reliability analysis method used to deal with DICLFL considering shutdown correlation is provided based on GO methodology.Firstly, a new operator, which is used to describe DICLFL considering shutdown correlation,whose number is 1,is created and named as Type 9C operator. And then,the formulas of type 9C operator are derived based on Markov process theory. Finally,the new method presented in this paper is adopted to conduct the reliability analysis of an electro-hydraulic servo speed control system. The analysis result is compared with those of Monte Carlo simulation and fault tree analysis( FTA). The comparison results show that this new reliability analysis method based on GO methodology is feasible and meaningful for reliability analysis of repairable systems with DICLFL considering shutdown correlation.Meantime,it will be useful for more other applications.
文摘Globally,educational institutions have reported a dramatic shift to online learning in an effort to contain the COVID-19 pandemic.The fundamental concern has been the continuance of education.As a result,several novel solutions have been developed to address technical and pedagogical issues.However,these were not the only difficulties that students faced.The implemented solutions involved the operation of the educational process with less regard for students’changing circumstances,which obliged them to study from home.Students should be asked to provide a full list of their concerns.As a result,student reflections,including those from Saudi Arabia,have been analysed to identify obstacles encountered during the COVID-19 pandemic.However,most of the analyses relied on closed-ended questions,which limited student involvement.To delve into students’responses,this study used open-ended questions,a qualitative method(content analysis),a quantitative method(topic modelling),and a sentimental analysis.This study also looked at students’emotional states during and after the COVID-19 pandemic.In terms of determining trends in students’input,the results showed that quantitative and qualitative methods produced similar outcomes.Students had unfavourable sentiments about studying during COVID-19 and positive sentiments about the face-to-face study.Furthermore,topic modelling has revealed that the majority of difficulties are more related to the environment(home)and social life.Students were less accepting of online learning.As a result,it is possible to conclude that face-to-face study still attracts students and provides benefits that online study cannot,such as social interaction and effective eye-to-eye communication.
基金funded by the Program of China Earthquake Science Data Sharing Platform and the Youth Fund(17404031570521)
文摘In general, the seismic response analysis in earthquake engineering assumes that the vibration parameters of the target and the contact surface of the external media are identical,i. e., single point input. However, earthquake energy has an attenuation phenomenon in wave propagation,so a wide range of soil slopes and the external medium contact surface of different input points on motion are not identical. If we consider single point input only, it may not correspond with reality, so it is necessary to carry out research on multi-point input methods. Based on the 2-D slope model,single-point input and multi-point input are performed respectively to analyze and compare their similarities and differences in the perspectives of the characteristics of seismic response of soil layer and plastic zone distribution to provide a reference for the seismic design of slopes. The results show that in the perspective of soil seismic response analysis,the peak acceleration output and peak velocity output under multi-point input are greater than the peak values under single point input at the same monitoring point,the peak appearing time is also earlier than that of the single point input; in terms of the plastic zone distribution,the multi-point effect is manifested as the presence of more obvious tensile shear failures; in the perspective of safety coefficient,the safety coefficient under each multi-point input is smaller than that of single point input,a difference of about 7 % or so. In summary,multi-point input is more reasonable and practical than single point input,so multi-point input should be considered in seismic design.
基金partially supported by National Key R&D Program of China(2018YFB1304600)National Natural Science Foundation of China(51805021,U1813220)+1 种基金China Postdoctoral Science Foundation Grant(2018M631311)the Fundamental Research Funds for the Central Universities(XK1802-4)
文摘This work proposes a robust fault detection and isolation scheme for discrete-time systems subject to actuator faults,in which a bank of H_/H∞ fault detection unknown input observers(UIOs) and a zonotopic threshold analysis strategy are considered. In observer design, finite-frequency H_ index based on the generalized Kalman-Yakubovich-Popov lemma and H∞ technique are utilized to evaluate worst-case fault sensitivity and disturbance attenuation performance, respectively. The proposed H_/H∞ fault detection observers are designed to be insensitive to the corresponding actuator fault only, but sensitive to others.Then, to overcome the weakness of predefining threshold for FDI decision-making, this work proposes a zonotopic threshold analysis method to evaluate the generated residuals. The FDI decision-making relies on the evaluation with a dynamical zonotopic threshold. Finally, numerical simulations are provided to show the feasibility of the proposed scheme.
基金Project 70771105 supported by the National Natural Science Foundation of China
文摘In recent years improper allocation of safety input has prevailed in coal mines in China, which resulted in the frequent accidents in coal mining operation. A comprehensive assessment of the input efficiency of coal mine safety should lead to improved efficiency in the use of funds and management resources. This helps government and enterprise managers better understand how safety inputs are used and to optimize allocation of resources. Study on coal mine’s efficiency assessment of safety input was con- ducted in this paper. A C2R model with non-Archimedean infinitesimal vector based on output is established after consideration of the input characteristics and the model properties. An assessment of an operating mine was done using a specific set of input and output criteria. It is found that the safety input was efficient in 2002 and 2005 and was weakly efficient in 2003. However, the effi- ciency was relatively low in both 2001 and 2004. The safety input resources can be optimized and adjusted by means of projection theory. Such analysis shows that, on average in 2001 and 2004, 45% of the expended funds could have been saved. Likewise, 10% of the safety management and technical staff could have been eliminated and working hours devoted to safety could have been reduced by 12%. These conditions could have given the same results.
基金Under the auspices of Key Program of National Natural Science Foundation of China (No. 40635030)National Natu-ral Science Foundation of China (No. 40571041)
文摘Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995–2004 and to analyze the demateri- alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro- leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco- nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min- ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources’ cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.
文摘Because conditions for the grain production are not favorable and the input in the production factors ofmodern agriculture is not sufficient, the grain supply has been less than the demand for a long time. By means of greycorrelation analysis, this paper deals with the correlation situation among such input factors as the grain sown area, thetotal power of agricultural machinery, the fertilizer utilization volume, the actual irrigation area, the damage area, thenumber of farming labor force, in order to understand the major restricting and driving forces that have affected thegrain output in the recent 23 years. The analysis shows that the grain sown area and fertilizer utilization volume are thetwo most important leading factors that affect grain production in Guizhou Province, while the damage area and the totalpower of the farming-used machines are the following factors. Fertilizer utilization volume and the actual agriculturalmachinery and irrigation area are the two increasingly influential factors that affect grain production. The influence of thefarming labor force upon grain production became less strong. The main measures to increase grain production outputin Guizhou Province are to stabilize the arable land, increase the actual irrigation area, expedite the transfer of thefarming labor force and increase the input of modern agriculture.
文摘Comparing conventional practice and experience of some foreign countries financing their basic research programs, this article analyzes and explores the scope, funding principles, channels and forms of China’s basic research input.
基金Supported by Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDA05150600)National Natural Science Foundation of China (No. 71273027 and No. 70903066)Beijing Planning Office of Philosophy and Social Science (No. 11JGC105)
文摘As China's energy intensity fluctuated in recent years, it is necessary to examine whether this fluctuation happened at a regional level. This paper establishes a decomposition model by using the structural decomposition analysis (SDA) method at a regional level. Then this model is employed to empirically analyze the changes of Beijing's energy intensity. The conclusions are as follows: during 2002-2010, except petroleum, the energy intensity decreased and the changes were mostly attributed to the technology changes, while the final use variation actually increased the energy intensity; comparing different periods of 2002-2010, the decline rates of energy intensity for coal and hydropower were decreasing, resulting from the production technology being more energy-intensive than before; the energy intensity changes of petroleum firstly increased substantially and then decreased moderately.
基金Project(2012GK2025)supported by Science-Technology Plan Foundation of Hunan Province,ChinaProject(2013zzts039)supported by the Fundamental Research Funds for Central South University,China
文摘A hierarchical structural decomposition analysis(SDA) model has been developed based on process-level input-output(I-O) tables to analyze the drivers of energy consumption changes in an integrated steel plant during 2011-2013. By combining the principle of hierarchical decomposition into D&L method, a hierarchical decomposition model for multilevel SDA is obtained. The developed hierarchical IO-SDA model would provide consistent results and need less computation effort compared with the traditional SDA model. The decomposition results of the steel plant suggest that the technology improvement and reduced steel final demand are two major reasons for declined total energy consumption. The technical improvements of blast furnaces, basic oxygen furnaces, the power plant and the by-products utilization level have contributed mostly in reducing energy consumption. A major retrofit of ancillary process units and solving fuel substitution problem in the sinter plant and blast furnace are important for further energy saving. Besides the empirical results, this work also discussed that why and how hierarchical SDA can be applied in a process-level decomposition analysis of aggregated indicators.
文摘The dynamic input output model is well known in economic theory and practice.In this paper,the asymptotic stability and balanced growth solutions of the dynamic input output system are considered.Under some natural assumptions which do not require the technical coefficient matrix to be indecomposable,it has been proved that the dynamic input output system is not asymptotically stable and the closed dynamic input output model has a balanced growth solution.
文摘This paper established a by sector water consumption and economy analysis integrated model with input–output analysis method. The model can be used to identify the relationships between economic activities and the direct water consumption, the total water consumption and the intersectoral water transaction for detailed sectors in regional economy. The method is applied to Hai River Basin in China that is characterized by water shortage. The results found that in Hai River Basin, agriculture sector is responsible for 81.2% of the direct total water consumption in the region, but industrial and service sectors account for 53.2% of the indirect total water consumption. To 24 industrial and service sectors, their ratios of indirect water consumption to total water consumption belong to [90%, 99%]. To per unit output, water consumption intensity was highest in agriculture sector 1 at 96.91 m3 per thousand Yuan, the value of 28 industrial and service sectors were smaller than 1. Products of sector 1, sector 24, sector 3, sector 12, sector 6, sector 11 and sector 10 are the main suppliers of indirect water.
文摘Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvability,continuity and surjectivity,and some fixed point and surjectivity methods in nonlinear analysis were used to deal with these questions. As a result,the main theorems are obtained,which provide some sufficient criterions to solve above questions described by the boundary properties of the enterprises consuming operator.
文摘Base on the framework of material flow analysis (MFA) proposed by Eurostat, this paper collected relateddata and conducted a regional MFA for the Chengyang District in Qingdao. The indicators such as Direct Material Input(DMI), Direct Material Consumption (DMC) and Exports are calculated or estimated for the period of year 1995through 2004. Several derivable indicators defining direct material productivity and material intensity are also evaluatedand some valuable conclusions were drawn. DMI in absolute number increased from about 1645.9 kilotons in 1995 toabout 8052.5 kilotons in 2004. Imports contribute to about 47 to 69% of DMI, and the biggest component of imports isfossil fuel that approximately accounts for 50% of imports. DMI per capita of Chengyang District increased rapidly andreached 17.4 tons in 2004. Compared with other five economies studied by WRI, material consumption intensity ofChengyang District is significantly lower than developed countries, which indicates that Chengyang District is still in adevelopment stage. The direct material productivity (actual GDP per DMI) increased 59.1% from 1995 to 2004 and hasbeen higher than either of studies in China, which indicates efficiency of resources utilization has improved obviously inChengyang District. But there was significant increase in material input in the last decade, which shows that rapidincrease of economy is highly dependent on requirement and consumption of natural resources. Therefore, in order topromote the sustainability, it is essential to develop circular economy and improve utilization efficiency of resources.
基金Supported by National Social Science Fund Project(11BJY113)Fundamental Research Funds for the Central Universities(SWU 1509516&1509437)
文摘As a basic industry,agriculture has a far-reaching impact on national economy. Based on input-output tables of China in 2005 and2010,this paper gives a deep insight into the relationship between agriculture and national economy and its macroeconomic effects by the methods of input-output analysis,industrial correlation and macroeconomic effect analysis. The results show that the agricultural development is highly dependent on the national economy,but makes low contribution; agriculture contributes to promoting employment and improving the structure of national income distribution; despite the government's tax incentive,the agricultural equipments are updated slowly,and the corporate profits are at low level; agricultural export effect is far below the average industry level,but the import effect increases over the years,and final products are often used for domestic consumption. Finally,we set forth recommendations for improving the development of agriculture and national economy.
基金Supported by the Key Research Subject of Economic Census of Xinjiang Production and Construction Corps(201004)the President Fund for Natural Science Project of Tarim University(TDZKSS09010)+1 种基金the Quality Project of Tarim University(TDZGKC09085)the Quality Project of Tarim University(TDZGTD09004)
文摘Agricultural input and output status in southern Xinjiang,China is introduced,such as lack of agricultural input,low level of agricultural modernization,excessive fertilizer use,serious damage of environment,shortage of water resources,tremendous pressure on ecological balance,insignificant economic and social benefits of agricultural production in southern Xinjiang,agriculture remaining a weak industry,agricultural economy as the economic subject of southern Xinjiang,and backward economic development of southern Xinjiang.Taking the Aksu area as an example,according to the input and output data in the years 2002-2007,input-output model about regional agriculture of the southern Xinjiang is established by principal component analysis.DPS software is used in the process of solving the model.Then,Eviews software is adopted to revise and test the model in order to analyze and evaluate the economic significance of the results obtained,and to make additional explanations of the relevant model.Since the agricultural economic output is seriously restricted in southern Xinjiang at present,the following countermeasures are put forward,such as adjusting the structure of agricultural land,improving the utilization ratio of land,increasing agricultural input,realizing agricultural modernization,rationally utilizing water resources,maintaining eco-environmental balance,enhancing the awareness of agricultural insurance,minimizing the risk and loss,taking the road of industrialization of characteristic agricultural products,and realizing the transfer of surplus labor force.